University of Twente Student Theses

2023

Buskens, Nienke (2023) The Effect of Bending on the Critical Current of ReBCO Based Stack Cables : High Magnetic Fields for Muon Collider.

Groote Veldman, W.J. (2023) Optimizing BLE Gateway Positioning in Aviation Industry: An Algorithm Based on Link Budget and Log-Distance Path Loss.

Louw, Maaike van der (2023) Student Engagement with Flipped Classroom Mathematics Video Lectures: An Exploratory Study in Secondary School.

Smit, Gijs de (2023) Cycling Maneuver Prediction Using Bicycle-mounted Motion Sensors.

Wehning, T. (2023) Improving Performance of Multiple Sequence Alignment through Maximal Exact Match Identification.

Wijnholds, Wick (2023) Heuristics for inventory management of reusable medical device trays.

2022

Janssen, Renske (2022) Conflicts at railway stations due to delay propagation.

Sharma, Suyash (2022) Assessing conversational agent interaction style preference in children for information retrieval tasks.

Tel, J.A. (2022) Optimization model describing the performance of a 3-phase coreless brushless axial flux PM machine with dual Halbach array.

Veldman, T.C. (2022) A Machine Learning Approach to the Detection of Malfunctions in HVAC Units.

2021

Berg, Rutger van den (2021) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Cavelaars, D.J. (2021) Predicting TSB values using TcB measurements and patient characteristics with machine learning.

Hal, X.C. (2021) Identifying impact damage with the use of Piezoelectric transducers in a phased array.

Hallsworth, Sian (2021) Metrics for Efficiency of Spectrum Sharing in Wireless Networks.

Hamstra, Mathijs (2021) Realizing DC Electric Metamaterials Through Fused Deposition Modelling.

Lange, C.L. (2021) Feasibility of micro wind turbines as power solution for future mars missions.

Lievense, M.M. (2021) Detecting, tracking, and identifying horses across heterogeneous videos.

Slooten, Janiek van (2021) Thermoelectric properties of vertically aligned nanocomposite films.

Tafuro, M. (2021) Assessment of the contractile properties of engineered heart tissues by optical flow.

2020

Alberts, L. (2020) Static verification for Snap!

Bertolotti, E.M. (2020) Automatic segmentation of pelvic floor ring on 3D ultrasound.

Roskamp, T.J. (2020) Investigation of Second Generation Superconductor Tapes to be used for Superconducting Electronics.

Sessink, Joost (2020) Improving the automatic generation of Dutch soccer reports using the PASS system.

Sirboiu, D.C. (2020) 3D printed acoustically transparent pressure sensor for breast cancer detection.

2019

Giorgio, Thomas (2019) A methodology on analyzing pressurized lip seal geometry under misalignment through glass.

Havinga, Thijs (2019) Embedded Infrastructure for Decentralized Energy Management.

Liefland, J.L. van (2019) Using the Safety Cube method and a Maturity Model for Urban Mobility to assess 6 categories of Personal Urban Mobility systems in the Netherlands.

2018

Doller, Daniel (2018) Item availability restricted.

Gherasim, Teodora-Maria (2018) To what extent is Privacy respected in Marketing involving Internet of Things?

Oyediran, A.S.M. (2018) Scaling beyond HoriZZon.

Paun, Stefan (2018) Design and characterization of a vibrotactile haptic feedback system for drone operators.

Tabak, P.A. (2018) Prandtl number dependence in sheared Rayleigh-Bénard convection.

2017

Fritz, Felix René (2017) Bike Sharing in New York City: How the Citi Bike System serves Points of Interest.

Jonker, J.S. (2017) Step Free Energy - The equilibrium shape of a hexagonal lattice.

Schlief, J.G.L. (2017) Temperature optimization of the SuperParamagnetic Quantifier for comparison with standard methods.

2016

Awlad Wadair, Balsam (2016) Tweeting about health technologies during the Movember campaign : Who is involved and how do they frame their discourse? : an exploratory study investigating the identity of Twitter users tweeting about technology and treatments of Prostate and Testicular cancers, and how they frame their discourse.

Kleiboer, D.M.G. (2016) The design & prototype of McRobot 3.2 : a patient mounted Parallel Manipulator for surgical tool orientation.

Mulder, Martijn (2016) Synthesis of LiNi0.5Mn1.5O4 nanofibers by electrospinning.

2015

Bakker, M. (2015) Numerical mathematics on FPGAs using CλaSH.

Birkhölzer, Y.A. (2015) Nanomechanical sensing of hypermethylated DNA for the detection of bladder cancer.

Boer, Vincent de (2015) Nano-bio-sensing with CMOS-Nano-capacitor-array.

Braakman, Robin (2015) Self-healing of composite material with an intermediate supramolecular layer.

El Assal, K.M. (2015) GreenMirror : a visualization and animation framework for state-transition models.

Gerritsen, Jasper (2015) Sound source localisation in a robot.

Groenestein, Michiel (2015) Relaties tussen subattributen, argumenten en het belang van attributen.

Haselhoff, Alexander (2015) The analysis of a mixed steam-gas aero derivative turbine.

Kers, R.J. (2015) Head mounted control system for robotic assisted surgery.

Luesink, Erwin (2015) Bursts in brainactivity - a mean field reduction.

Meijer, E.M. (2015) On-line monitoring of microreactor products using an optofluidic microchip.

Meurs, J. van (2015) The effects of overlap area and surface roughness on metal-composite friction spot weld joints.

Meyere, K,P. de (2015) Switching behavior of AMLEDS for implementation in opto-coupling devices on CMOS chips.

Olk, Christopher (2015) Study of the regeneration of K2CO3·1.5H2O from KHCO3 via a temperature and water vapour pressure swing.

Ven, B. van de (2015) The influence of annealing on gate-defined quantum dot devices.

Voormolen, M.S. (2015) An improved bending model for thermoplastic composites in forming processes.

2014

Back, Shinwoo (2014) Synthesis of bimetallic tungstates for finding photocatalytic active compounds with a smaller band gap than tungsten oxide.

Berendsen, Jorien (2014) The entrapment and characterization of single spermatozoa in a microfluidic system.

Bienia, Nikodem (2014) Performance of platinized TiO2 on organic dye degradation coupled with H2 production.

Dijk, Lieke van (2014) Design optimization of a new superconducting magnet system for a LAr Neutrino Detector - A technical design report performed within the framework of a bachelor assignment as part of the Advanced Technology bachelor programme at the ATLAS magnet group at CERN.

Dixhoorn, Frederieke van (2014) Visualization and pressure measurements of the oscillatory flow in a jet pump.

Nijenhuis, N. (2014) Ontwerp een freesrobot.

Oude Elferink, Wout (2014) Fingerprint acquisition with a smartphone camera.

Schlepers, Mathijs (2014) Investigation of the mechanical properties of 3D printed structures of Objet and DLP.

Schneider, Helen (2014) Multilayer polyelectrolyte coating of cation exchange membranes to increase monovalent selectivity in reverse electrodialysis.

Velden, L. van der (2014) Liquid-liquid two phase flow and solvent extraction in the squeezing regime with on-chip separation of phases.

Witsen, Michaël van (2014) Superconductivity in real space.

Wouda, Anna Maria (2014) Diglycolamide-functionalized amino group-containing platforms for nuclear waste processing.

2013

Eijkelenkamp, Rik (2013) A study to the effect of cobalt-doping on hybrid silica membranes.

Hilarius, R. (2013) Measuring performance as a dependent variable of patent management maturity.

Keuter, D.R. (2013) Item availability restricted.

Melzen, Melvin van (2013) Critical current degradation and damage assessment of YBCO coated superconductive tapes under transverse compressive stress.

Nijsten, L.M.J. (2013) Fast temperature changes for polymerase chain reaction (PCR) on a lab-on-a-chip (LoaC).

Poel, K. van der (2013) Investigation of methods to benchmark nanofluids.

Sikkens, B.N.A. (2013) An analysis of Coriolis mass flow chips with a bypass.

2012

Bullee, P.A. (2012) Oleophobic surfaces by PDMS molding : from simple techniques to advanced surfaces.

Donselaar, V.L. van (2012) Information Retrieval models based on electrical circuit analysis using Ohm’s law.

Flanderijn, Stefan (2012) Mechanochemical devulcanization of butadiene rubber with DPDS as a devulcanization aid.

Kamp, Pieter (2012) Magnetic self-assembly in 3 dimensions at the macro scale.

Klein Schaarsberg, Martin H. (2012) Laser-induced cavitation in light-absorbing liquids.

Moonen, Niek (2012) An automated David laser scanner for facial acquisition.

Poppelen, Daniël van (2012) The influence of in-plane miscut on the surface morphology of annealed DyScO3 (110) substrates.

Straathof, Paul (2012) Botonderzoek: het ontwerpen van een meetopstelling waarmee de temperatuursveranderingen in het corticale botweefsel van een pijpbeen dat geruimd wordt, gemeten kunnen worden.

Strijker, Vincent (2012) Decreasing cool-down time of a Joule-Thomson microcooler by introducing multiple closable restriction channels.

Tiem, Joël van (2012) Electrospray from glass capillaries.

Zschocke, Daniel (2012) Ferroelectric properties around he MPB of PbZr1-xTixO3 thin films.

2011

Remmerswaal, Guus (2011) Ontwerp voor een nieuw hulpmiddel voor orderpicking, op basis van een procesanalyse van bestaande hulpmiddelen.