University of Twente Student Theses

Essay

Alberts, L. (2020) Static verification for Snap!

Awlad Wadair, Balsam (2016) Tweeting about health technologies during the Movember campaign : Who is involved and how do they frame their discourse? : an exploratory study investigating the identity of Twitter users tweeting about technology and treatments of Prostate and Testicular cancers, and how they frame their discourse.

Back, Shinwoo (2014) Synthesis of bimetallic tungstates for finding photocatalytic active compounds with a smaller band gap than tungsten oxide.

Bakker, M. (2015) Numerical mathematics on FPGAs using CλaSH.

Berendsen, Jorien (2014) The entrapment and characterization of single spermatozoa in a microfluidic system.

Berg, Rutger van den (2021) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Bertolotti, E.M. (2020) Automatic segmentation of pelvic floor ring on 3D ultrasound.

Bienia, Nikodem (2014) Performance of platinized TiO2 on organic dye degradation coupled with H2 production.

Birkhölzer, Y.A. (2015) Nanomechanical sensing of hypermethylated DNA for the detection of bladder cancer.

Boer, Vincent de (2015) Nano-bio-sensing with CMOS-Nano-capacitor-array.

Braakman, Robin (2015) Self-healing of composite material with an intermediate supramolecular layer.

Bullee, P.A. (2012) Oleophobic surfaces by PDMS molding : from simple techniques to advanced surfaces.

Buskens, Nienke (2023) The Effect of Bending on the Critical Current of ReBCO Based Stack Cables : High Magnetic Fields for Muon Collider.

Cavelaars, D.J. (2021) Predicting TSB values using TcB measurements and patient characteristics with machine learning.

Dijk, Lieke van (2014) Design optimization of a new superconducting magnet system for a LAr Neutrino Detector - A technical design report performed within the framework of a bachelor assignment as part of the Advanced Technology bachelor programme at the ATLAS magnet group at CERN.

Dixhoorn, Frederieke van (2014) Visualization and pressure measurements of the oscillatory flow in a jet pump.

Doller, Daniel (2018) Item availability restricted.

Donselaar, V.L. van (2012) Information Retrieval models based on electrical circuit analysis using Ohm’s law.

Eijkelenkamp, Rik (2013) A study to the effect of cobalt-doping on hybrid silica membranes.

El Assal, K.M. (2015) GreenMirror : a visualization and animation framework for state-transition models.

Flanderijn, Stefan (2012) Mechanochemical devulcanization of butadiene rubber with DPDS as a devulcanization aid.

Fritz, Felix René (2017) Bike Sharing in New York City: How the Citi Bike System serves Points of Interest.

Gerritsen, Jasper (2015) Sound source localisation in a robot.

Gherasim, Teodora-Maria (2018) To what extent is Privacy respected in Marketing involving Internet of Things?

Giorgio, Thomas (2019) A methodology on analyzing pressurized lip seal geometry under misalignment through glass.

Groenestein, Michiel (2015) Relaties tussen subattributen, argumenten en het belang van attributen.

Groote Veldman, W.J. (2023) Optimizing BLE Gateway Positioning in Aviation Industry: An Algorithm Based on Link Budget and Log-Distance Path Loss.

Hal, X.C. (2021) Identifying impact damage with the use of Piezoelectric transducers in a phased array.

Hallsworth, Sian (2021) Metrics for Efficiency of Spectrum Sharing in Wireless Networks.

Hamstra, Mathijs (2021) Realizing DC Electric Metamaterials Through Fused Deposition Modelling.

Haselhoff, Alexander (2015) The analysis of a mixed steam-gas aero derivative turbine.

Havinga, Thijs (2019) Embedded Infrastructure for Decentralized Energy Management.

Hilarius, R. (2013) Measuring performance as a dependent variable of patent management maturity.

Janssen, Renske (2022) Conflicts at railway stations due to delay propagation.

Jonker, J.S. (2017) Step Free Energy - The equilibrium shape of a hexagonal lattice.

Kamp, Pieter (2012) Magnetic self-assembly in 3 dimensions at the macro scale.

Kers, R.J. (2015) Head mounted control system for robotic assisted surgery.

Keuter, D.R. (2013) Item availability restricted.

Kleiboer, D.M.G. (2016) The design & prototype of McRobot 3.2 : a patient mounted Parallel Manipulator for surgical tool orientation.

Klein Schaarsberg, Martin H. (2012) Laser-induced cavitation in light-absorbing liquids.

Lange, C.L. (2021) Feasibility of micro wind turbines as power solution for future mars missions.

Liefland, J.L. van (2019) Using the Safety Cube method and a Maturity Model for Urban Mobility to assess 6 categories of Personal Urban Mobility systems in the Netherlands.

Lievense, M.M. (2021) Detecting, tracking, and identifying horses across heterogeneous videos.

Louw, Maaike van der (2023) Student Engagement with Flipped Classroom Mathematics Video Lectures: An Exploratory Study in Secondary School.

Luesink, Erwin (2015) Bursts in brainactivity - a mean field reduction.

Meijer, E.M. (2015) On-line monitoring of microreactor products using an optofluidic microchip.

Melzen, Melvin van (2013) Critical current degradation and damage assessment of YBCO coated superconductive tapes under transverse compressive stress.

Meurs, J. van (2015) The effects of overlap area and surface roughness on metal-composite friction spot weld joints.

Meyere, K,P. de (2015) Switching behavior of AMLEDS for implementation in opto-coupling devices on CMOS chips.

Moonen, Niek (2012) An automated David laser scanner for facial acquisition.

Mulder, Martijn (2016) Synthesis of LiNi0.5Mn1.5O4 nanofibers by electrospinning.

Nijenhuis, N. (2014) Ontwerp een freesrobot.

Nijsten, L.M.J. (2013) Fast temperature changes for polymerase chain reaction (PCR) on a lab-on-a-chip (LoaC).

Olk, Christopher (2015) Study of the regeneration of K2CO3·1.5H2O from KHCO3 via a temperature and water vapour pressure swing.

Oude Elferink, Wout (2014) Fingerprint acquisition with a smartphone camera.

Oyediran, A.S.M. (2018) Scaling beyond HoriZZon.

Paun, Stefan (2018) Design and characterization of a vibrotactile haptic feedback system for drone operators.

Poel, K. van der (2013) Investigation of methods to benchmark nanofluids.

Poppelen, Daniël van (2012) The influence of in-plane miscut on the surface morphology of annealed DyScO3 (110) substrates.

Remmerswaal, Guus (2011) Ontwerp voor een nieuw hulpmiddel voor orderpicking, op basis van een procesanalyse van bestaande hulpmiddelen.

Roskamp, T.J. (2020) Investigation of Second Generation Superconductor Tapes to be used for Superconducting Electronics.

Schlepers, Mathijs (2014) Investigation of the mechanical properties of 3D printed structures of Objet and DLP.

Schlief, J.G.L. (2017) Temperature optimization of the SuperParamagnetic Quantifier for comparison with standard methods.

Schneider, Helen (2014) Multilayer polyelectrolyte coating of cation exchange membranes to increase monovalent selectivity in reverse electrodialysis.

Sessink, Joost (2020) Improving the automatic generation of Dutch soccer reports using the PASS system.

Sharma, Suyash (2022) Assessing conversational agent interaction style preference in children for information retrieval tasks.

Sikkens, B.N.A. (2013) An analysis of Coriolis mass flow chips with a bypass.

Sirboiu, D.C. (2020) 3D printed acoustically transparent pressure sensor for breast cancer detection.

Slooten, Janiek van (2021) Thermoelectric properties of vertically aligned nanocomposite films.

Smit, Gijs de (2023) Cycling Maneuver Prediction Using Bicycle-mounted Motion Sensors.

Straathof, Paul (2012) Botonderzoek: het ontwerpen van een meetopstelling waarmee de temperatuursveranderingen in het corticale botweefsel van een pijpbeen dat geruimd wordt, gemeten kunnen worden.

Strijker, Vincent (2012) Decreasing cool-down time of a Joule-Thomson microcooler by introducing multiple closable restriction channels.

Tabak, P.A. (2018) Prandtl number dependence in sheared Rayleigh-Bénard convection.

Tafuro, M. (2021) Assessment of the contractile properties of engineered heart tissues by optical flow.

Tel, J.A. (2022) Optimization model describing the performance of a 3-phase coreless brushless axial flux PM machine with dual Halbach array.

Tiem, Joël van (2012) Electrospray from glass capillaries.

Velden, L. van der (2014) Liquid-liquid two phase flow and solvent extraction in the squeezing regime with on-chip separation of phases.

Veldman, T.C. (2022) A Machine Learning Approach to the Detection of Malfunctions in HVAC Units.

Ven, B. van de (2015) The influence of annealing on gate-defined quantum dot devices.

Voormolen, M.S. (2015) An improved bending model for thermoplastic composites in forming processes.

Wehning, T. (2023) Improving Performance of Multiple Sequence Alignment through Maximal Exact Match Identification.

Wijnholds, Wick (2023) Heuristics for inventory management of reusable medical device trays.

Witsen, Michaël van (2014) Superconductivity in real space.

Wouda, Anna Maria (2014) Diglycolamide-functionalized amino group-containing platforms for nuclear waste processing.

Zschocke, Daniel (2012) Ferroelectric properties around he MPB of PbZr1-xTixO3 thin films.