University of Twente Student Theses

Login

Programme: Sustainable Energy Technology MSc (60443)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Year | Item Type
Jump to: 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010
Number of items: 55.

2017

Ferreira Nascimento, Leonardo Teodoro (2017) Synthesis optimization of energy systems maximizing regional profit.

Gaete Haller, P.J. (2017) Data Analysis for installed PV Systems in the Netherlands.

Iordache, C. (2017) Radial lip seal design parameters and simulations : influencing leak-rate parameters.

Karaliolios, E.C.J. (2017) Energy modelling analysis of Heffron Hall.

Prieto Serratos, Erik Armando (2017) Multilevel panel method validation using the New MEXICO Wind Tunnel Measurements.

VAITHIYANATHASAMY, R. (2017) CFD analysis of 2D and 3D airfoils using open source solver SU2.

Vaithiyanathasamy, Mr. Rajesh (2017) Double wake model for separated flows over airfoils.

Zhang, J. (2017) Actions towards decarbonization : modelling in climate change policies.

Zhang, Jing (2017) Actions Towards Decarbonization - Climate Policy Assessment and Emissions Modelling with Case Study for South Africa.

2016

Budiman, A.H.S. (2016) Modeling of magnetocaloric refrigeration with packed bed regenerator.

Buitink, M.N. (2016) Impact van het 20 kV beleid van Liander op de netverliezen in het middenspanningsnet.

Dixhoorn, F. van (2016) Evaluation of the Potential of Diaper Recycling Within AEB Amsterdam.

Flanderijn, S. (2016) Developing a dynamic model of a pyrolysis plant for an operator training simulator.

Groendijk, H.A. (2016) Ultrashort laser processing of glass : cutting and micro surface structuring of soda-lime glass.

Hadisaputro, Yosia Giovanni (2016) Combination of Phase Change Material with concrete for foundation uses.

Hartog, Wilmar den (2016) Heat transfer to sub- and supercritical water flowin a vertical tube at lowmass fluxes.

Jansen van Rosendaal, N A (2016) 2D Quench propagation modelling in COMSOL.

Kishore, R. (2016) Photoelectrochemical Water Splitting Using Metal Oxides.

Meijvogel, D.T. (2016) De structuur van het innovatiesysteem van BIPV.

2015

Bima Angunn Putra, A. (2015) Feasibility Study of Power to Gas Technology at Twence.

Derkink, I.H. (2015) ORC Evaporator fouling by biomass combustion.

Engler Faleiros, D. (2015) Wind tunnel Investigation on Trailing Edge Noise Mitigation via Sawtooth Serrations.

Hoving, J.H.K. (2015) MAINTAINING ATES BALANCE USING CONTINUOUS COMMISSIONING AND MODEL PREDICTIVE CONTROL : Development of a reference model and analysis of method potential based on a case study at the Kropman Utrecht office.

Jin, H. (2015) Use the laser engraving machines to achieve laser cleaning, laser post-melting and roughness control of the anilox rolls.

Lamboo, S. (2015) Grid importing for CFD simulations of turbomachines.

Westenberg, A.J.C. (2015) Internship Report – University California Davis.

Zande, M.R. van de (2015) Back contact modules in PhotoVoltaic Thermal (PVT) applications.

2014

Adhikari, S. (2014) Internship Report on benchmarking of Python based turbine model of cost of energy model; and generation of load coefficients to be used in the turbine model.

Bairaktaris, D. (2014) Project feasibility of wood fired CHP.

Brinck, T.W.A. ten (2014) Accenture innovation Awards 2013 : Internship report Thijs ten Brinck.

Dagioglou, S. (2014) Development of a controller implementing the energy-planning phase of Triana using the Flexible Power Application Infrastructure.

Dagioglou, S. (2014) An implementation of the planning phase of Triana using the flexible power application infrastructure.

Damen, Robert Gerard (2014) Evaluating urban quality and sustainability - Presentation of a framework for the development of indicator assessment methods, by which the existing urban environment may be evaluated on quality and sustainability perfomance on a neighborhood scale.

Käo, S. (2014) Designing, Building and Testing a Wave Energy Converter with Control System.

Mimikos, N. (2014) Fast pyrolysis product distribution for residual biomass streams.

Pegels, K.J.R. (2014) Solar energy in Indonesia : an internship report on solar water heaters and sustainable energy technologies in the area of Bandung.

2013

Boekeloo, A. (2013) Let the water run : design and implementation of a micro hydropower project in Tumianuma, Chirusco valley, Ecuador.

Hengstum, Q.T. van (2013) Implementation of a BIPV plant at Centro de Tecnologia Informação Renato Archer.

Poel, B. van der (2013) Time-domain impedance boundary conditions in computational fluid dynamics for use in thermoacoustic modeling.

2012

Eilders, Leon (2012) Power curve uncertainty analysis.

Ewijk, S. van (2012) De Zwitserse energiesector : innovatielandschap en kansen voor Nederland.

Hul, J.F. van 't (2012) Internship report PEER Africa.

Offringa, Wietse (2012) Thermo-hydraulic joint model with typical pf joint parameters as exemplary input (TeST-Joint).

Wilmink, J.H. (2012) Item availability restricted.

2011

Bootsma, Klaas (2011) Item availability restricted.

Bos, Frans (2011) Torrefaction gradients in biomass.

Derese, Getachew M. (2011) Design of Plywood biogas digester.

Gun, Daan van der (2011) Item availability restricted.

Hagen, Jeffrey (2011) Hydrogen Recovery from UCG Gas: experimental data of hydrogen separation from UCG gas using a polymer membrane.

Holtkamp, Maarten (2011) Industrieel toepasbaar stoom geproduceerd met ultradiepe geothermie.

Moran, Javier (2011) Global cumulative installed photovoltaic capacity, solar home systems and mini-­‐grids.

Nastos, Vasileios (2011) Developing a realistic view on the availability of renewable resources for the road transport sector in the Netherlands in 2050.

2010

Coughlan, Darren (2010) HTHW temperature reduction.

Ubaydullaev, Bakhtiyor (2010) Feasability study for the university of Twente campus closed water cycle : feasibility study for use of sustainable energy from wastewater sludge and possibilities of wastewater sludge reuse.

Widjanarko, Stephanus M.D. (2010) Internship Vestas Wind system A/S : steady blade element momentum code for wind turbine design validation tool.

This list was generated on Sat Dec 16 05:11:31 2017 CET.