University of Twente Student Theses
Programme: Sustainable Energy Technology MSc (60443)
Up a level |
Essay
Budding, D.J. (2020) Techno-economic study of a power-to-hydrogen system in offshore wind energy.
Budiman, A.H.S. (2016) Modeling of magnetocaloric refrigeration with packed bed regenerator.
Buis, Geert (2023) Applying game-theory to evaluate incentives for cooperative behaviour between households within the distribution grid.
Castelán Castillo, David Daniel (2023) Design of an Energy Management System for Residential Buildings : A Sustainable Approach to Optimize Energy Efficiency and PV Integration.
Dagioglou, S. (2014) An implementation of the planning phase of Triana using the flexible power application infrastructure.
Dai, Yinping (2020) Modelling the LIFE project using DEMKit.
Damen, Robert Gerard (2014) Evaluating urban quality and sustainability - Presentation of a framework for the development of indicator assessment methods, by which the existing urban environment may be evaluated on quality and sustainability perfomance on a neighborhood scale.
Derese, Getachew M. (2011) Design of Plywood biogas digester.
Dhau, Khansa Irsalina (2020) Optimal Integration Strategies for a Green Tiny House Energy System.
Eversmann, H.Y.N. (2022) Whole Life Carbon Thinking : market and data analysis of whole life carbon in Dutch renovation projects.
Garrido Olvera, L.P. (2023) NiOx and K-doped NiOx for p-i-n Perovskite Solar Cells.
Gkioka, Nafsika (2024) Battery Sizing Optimization for Grid-Tied PV Systems.
Gun, Daan van der (2011) Item availability restricted.
Hartog, Wilmar den (2016) Heat transfer to sub- and supercritical water flowin a vertical tube at lowmass fluxes.
Hijwegen, R. (2023) Driving Sustainability in Swiss Multi-Family Housing : A Comprehensive Carbon Footprint and Optimisation Analysis of a Sustainable Heating System.
Hilgert, J.E. (2019) Techno-economic feasibility analysis of a second-generation ethanol plant using the solid part of digestate as feedstock.
Horst, Leonie M. (2023) Modelling the Spectro-Angular Reflectance of Grass for Accurate Bifacial Photovoltaic Yield Calculation.
Iordache, C. (2017) Radial lip seal design parameters and simulations : influencing leak-rate parameters.
Iyer, Logonadhan (2022) Low temperature combustion kinetics of high mineral paper sludge char particles.
Jain, Schrutir (2019) Energy transition in global north-south dimension : case of Overijssel and Mathura.
Jansen, B.J. (2023) Modelling the dynamic greenhouse gas emission intensity of the Dutch electricity grid.
Jansen, ir. Torben Harm (2024) Examining the Integration of Renewable Energy and Storage Technologies in Commercial Office Buildings: A Zilverling Case Study.
Karuppannan, Sriganesh (2020) Analysis of various demand side management control mechanisms for a smart solar carpark.
Kienhuis, J.B.J. (2024) The Effects of the Distribution of Energy Storage Systems in Dutch Low-Voltage Grids.
Koenjer, Chiel (2021) Influence of the test section type on the airfoil trailing edge aeroacoustic test.
Kumar, Vijayakumar Akshay (2022) Fabrication of solid polymer layer of poly-methyl methacrylate mixed with Lumogen F Red 305 for the use in Free Space Luminescent Solar Concentrators.
Laan, J.J. (2023) Electricity grid congestion and application of a novel tariff in the Netherlands.
Maas, T.J. (2023) Qualitative comparison of State of Charge prediction models for battery energy storage systems.
Marquez Ortiz, Aislinn (2020) Improving the mechanical properties of woody thermoplastic by reinforcing with short fibers (Pine Wood).
Nastos, Vasileios (2011) Developing a realistic view on the availability of renewable resources for the road transport sector in the Netherlands in 2050.
Nijenhuis, Bart (2020) Electric vehicle charging in the Dutch low-voltage grid.
Pappu, A. (2021) Demand side management using blockchain for distributed networks.
Poel, B. van der (2013) Time-domain impedance boundary conditions in computational fluid dynamics for use in thermoacoustic modeling.
Polanco Pacheco, Christian Andrés (2017) Supercritical water gasification of biomass: modeling of char formation and a socio-economic study.
Post, Ir. C.A. (2023) The Impact of Emerging Technologies and Energy Management Systems on a Neighbourhood.
Prieto Serratos, Erik Armando (2017) Multilevel panel method validation using the New MEXICO Wind Tunnel Measurements.
Ramesh, V.S. (2021) Fair power feed-in algorithms for PV curtailment with grid compliance in LV distribution grid.
Rao, Bolar Vanishree (2021) A study towards the optimization of pultrusion processes: process - microstructure -property correlation.
Reuling, Jacco (2023) Robust Online Electric Vehicle Control at a Charging Hub.
Rikhof, Anne (2023) Modelling the yield of building integrated photovoltaic systems employing free space luminescent solar concentrators.
Ruiz Flores, Diana Cecilia (2024) Hydrogenolysis of biomass to ethylene glycol : a yield improvement and its effects on lignin.
Sankara Subramanian, G.K. (2018) Improving the prediction of pressure gradient field in wind farm numerical simulation method, WAKEFARM.
Santana, Tiago de (2018) A feasibility study of electric cars powered by solar energy : The cases of The Netherlands, Norway and Brazil.
Tefery, Abselom B. (2022) Proces modeling of waste paper sludge fast pyrolysis in Aspen Plus.
Vaithiyanathasamy, Mr. Rajesh (2017) Double wake model for separated flows over airfoils.
Varenhorst, I.A.M. (2022) GridShield : Robust Control Algorithms to Prevent Power Outages.
Villavicencio Arzola, P.O. (2020) Primary interactions between cellulose and lignin during fast pyrolysis of lignocellulosic biomass.
Vouzavalis, Antonios (2020) Capturing car market dynamics in the transition towards electric mobility in an agent-based simulation model.
Wijmans, Nora (2020) Water, carbon and land footprint of solar thermal technologies.
Zhang, Jing (2017) Actions Towards Decarbonization - Climate Policy Assessment and Emissions Modelling with Case Study for South Africa.
Internship Report
Adhikari, S. (2014) Internship Report on benchmarking of Python based turbine model of cost of energy model; and generation of load coefficients to be used in the turbine model.
Adikala Raj, Periyanayaga Franklin (2019) Item availability restricted.
Agapitidis, S. (2018) Zero Net Energy Project.
Bairaktaris, D. (2014) Project feasibility of wood fired CHP.
Bima Angunn Putra, A. (2015) Feasibility Study of Power to Gas Technology at Twence.
Boekeloo, A. (2013) Let the water run : design and implementation of a micro hydropower project in Tumianuma, Chirusco valley, Ecuador.
Bongers, G.C. (2018) Sustainable building techniques within the Rensa Group.
Bootsma, Klaas (2011) Item availability restricted.
Bos, Frans (2011) Torrefaction gradients in biomass.
Bracesco, A.E.A. (2018) Item availability restricted.
Brinck, T.W.A. ten (2014) Accenture innovation Awards 2013 : Internship report Thijs ten Brinck.
Budding, D. (2019) Analysis of lidar-measured wind speeds above water waves.
Buiteveld, J. (2019) Item availability restricted.
Buitink, M.N. (2016) Impact van het 20 kV beleid van Liander op de netverliezen in het middenspanningsnet.
Coughlan, Darren (2010) HTHW temperature reduction.
Dagioglou, S. (2014) Development of a controller implementing the energy-planning phase of Triana using the Flexible Power Application Infrastructure.
Derkink, I.H. (2015) ORC Evaporator fouling by biomass combustion.
Dhau, K.I. (2019) The Effect of Woody Biomass Characteristics towards the Yield and Quality of Pyrolysis Oil at Twence.
Dixhoorn, F. van (2016) Evaluation of the Potential of Diaper Recycling Within AEB Amsterdam.
Eilders, Leon (2012) Power curve uncertainty analysis.
Engler Faleiros, D. (2015) Wind tunnel Investigation on Trailing Edge Noise Mitigation via Sawtooth Serrations.
Ewijk, S. van (2012) De Zwitserse energiesector : innovatielandschap en kansen voor Nederland.
Ferreira Nascimento, Leonardo Teodoro (2017) Synthesis optimization of energy systems maximizing regional profit.
Flanderijn, S. (2016) Developing a dynamic model of a pyrolysis plant for an operator training simulator.
Gaete Haller, P.J. (2017) Data Analysis for installed PV Systems in the Netherlands.
Granelli, L. (2018) Development of an hydrogen combustion plant.
Groendijk, H.A. (2016) Ultrashort laser processing of glass : cutting and micro surface structuring of soda-lime glass.
Hadisaputro, Yosia Giovanni (2016) Combination of Phase Change Material with concrete for foundation uses.
Hagen, Jeffrey (2011) Hydrogen Recovery from UCG Gas: experimental data of hydrogen separation from UCG gas using a polymer membrane.
Hengstum, Q.T. van (2013) Implementation of a BIPV plant at Centro de Tecnologia Informação Renato Archer.
Holtkamp, Maarten (2011) Industrieel toepasbaar stoom geproduceerd met ultradiepe geothermie.
Hul, J.F. van 't (2012) Internship report PEER Africa.
Jansen van Rosendaal, N A (2016) 2D Quench propagation modelling in COMSOL.
Jin, H. (2015) Use the laser engraving machines to achieve laser cleaning, laser post-melting and roughness control of the anilox rolls.
Karaliolios, E.C.J. (2017) Energy modelling analysis of Heffron Hall.
Kishore, R. (2016) Photoelectrochemical Water Splitting Using Metal Oxides.
Käo, S. (2014) Designing, Building and Testing a Wave Energy Converter with Control System.
Lamboo, S. (2015) Grid importing for CFD simulations of turbomachines.
Meijvogel, D.T. (2016) De structuur van het innovatiesysteem van BIPV.
Mimikos, N. (2014) Fast pyrolysis product distribution for residual biomass streams.
Moran, Javier (2011) Global cumulative installed photovoltaic capacity, solar home systems and mini-‐grids.
Offringa, Wietse (2012) Thermo-hydraulic joint model with typical pf joint parameters as exemplary input (TeST-Joint).
Oosterhuis, Hanne (2018) Item availability restricted.
Pegels, K.J.R. (2014) Solar energy in Indonesia : an internship report on solar water heaters and sustainable energy technologies in the area of Bandung.
Polanco Pacheco, Christian Andrés (2016) Optimum technology network for ethanol production and electricity cogeneration in Ecuador.
Prieto Serratos, E.A. (2017) Item availability restricted.
Rindt, Felicia (2018) Assessing the Carbon Footprint of RARCC and Papua Diving in Raja Ampat, Indonesia.
Shaliha, Julia K.P. (2018) CO2 Utilisation and Power-to-X Possibility at Twence.
Ubaydullaev, Bakhtiyor (2010) Feasability study for the university of Twente campus closed water cycle : feasibility study for use of sustainable energy from wastewater sludge and possibilities of wastewater sludge reuse.
Vaithiyanathasamy, R. (2017) CFD analysis of 2D and 3D airfoils using open source solver SU2.
Westenberg, A.J.C. (2015) Internship Report – University California Davis.
Widjanarko, Stephanus M.D. (2010) Internship Vestas Wind system A/S : steady blade element momentum code for wind turbine design validation tool.
Wijmans, Nora (2019) Effective laundry : a design engineering approach for laundry systems in small, off-grid, sustainably minded communities.
Wilmink, J.H. (2012) Item availability restricted.
Zande, M.R. van de (2015) Back contact modules in PhotoVoltaic Thermal (PVT) applications.
Zhang, J. (2017) Actions towards decarbonization : modelling in climate change policies.
Zuiderduin, Ewout R. (2018) The designing process of a long distance steam transport system.