University of Twente Student Theses
Domain: 35 chemistry
Up a level |
2024
Bardas, Dimitris (2024) pH Sensing and Antibody detection with Surface Functionalized ISFETs.
Chen, W. (2024) Characterizing α-Synuclein Polymorphs Through AFM, SAA, Spectrophotometry and Digestion Assay.
Dalen, K.J van (2024) Development and validation of a gasification model to investigate the effect of temperature reduction on increased syngas yield.
Engelen, F.H.A. (2024) Material preparation, design and production of an actuated 3D printed magnetic part.
Hassing, Lize (2024) Coupling and release of MMP9 VHHs in HA-TA/Dex-TA Hydrogels and the effectiveness of the VHH in vitro.
Kersten, J. (2024) Predicting the Formation of Disinfection Byproducts Using Environmental Parameters in Chlorinated Drinking Water.
Kossen, Jamie (2024) VHH surface modification to lipid nanoparticles for targeted osteoarthritic synovitis therapy.
Pieters, Lieke (2024) Conceptueel modelleren: De brug naar het systematisch benaderen van scheikundige vraagstukken in het voortgezet onderwijs.
Rojas Moreno, Efrén Miguel (2024) Cell-instructive membrane biomaterial for non-union bone healing.
Ruiz Flores, Diana Cecilia (2024) Hydrogenolysis of biomass to ethylene glycol : a yield improvement and its effects on lignin.
Saleh, E. (2024) Characterization of Electric Double-Layer Capacitors Using Electrochemical Impedance Spectroscopy.
Struikenkamp, Andy (2024) Antibacterial coatings for the prevention of biliary stent occlusion.
Vidulejs, Vits (2024) A DFT study of heterostructure-driven charge transfer in transition metal perovskites, or a computational look at LaFeO3, LaCoO3 and LaNiO3.
Vidulejs, Vits (2024) A DFT study of heterostructure-driven charge transfer in transition metal perovskites, or a computational look at LaFeO3, LaCoO3 and LaNiO3.
2023
Bloem, J.S. (2023) Hypertrophic cardiomyopathy : the changes in the non sarcomeric cytoskeleton linked to the nucleus.
Blok, M.L.A. (2023) A robust memristive system based on fullerene and HATNA functionalised glycol ethers.
Buijs, F.A.H. (2023) The effect of charged single chain polymeric nanoparticles on alpha-synuclein aggregation in SH-SY5Y cells.
Chennaveeranahalli, D.R. (2023) Fabrication and analysis of glucose sensor.
Geraets, E.K.W. (2023) Isolation of HepG2-derived extracellular vesicles in spiked human blood serum using magnetic beads and click chemistry.
Han, N.I.C.L. (2023) The Effect of α-Synuclein Phosphorylation on the Chaperone Activity of 14-3-3.
Heer, Inge de (2023) The influence of viscoelastic properties and surface roughnesses in an alginate-based hydrogel on the behaviour of hiPSC-CMs.
Hornman, A.E. (2023) Parametric Study of Scaling Rules for a PEM Fuel Cell in Untethered Microrobots.
Jager, K.E. de (2023) Development of a microfluidic device for point-of-care testing of free thiol levels in plasma : A lab-on-a-chip for biomarker detection of oxidative stress in IBD patients.
Lee, T.K.H. van der (2023) Kinetic modelling of LDPE hydrogenolysis using non-linear regression.
Leunissen, Iris (2023) Creating a hypoxic environment in a chip : Developing a hydrid hydrogel to mimic the hypoxic breast tumor microenvironment with an organ-on-chip platform.
Lier, R.C.W. van (2023) Ontwikkeling van het vierdejaarsvak "KCH3: Biochemie; Wat je eet ben jezelf" van de tweedegraads lerarenopleiding scheikunde dat voldoet aan de ontwerpeisen.
Maryam, Sahlabadi (2023) Balancing Energy Transition Policies & Sulfur Recovery Efficiency in the Netherlands.
Meevis, Y.H.W. (2023) Quantitative spectroscopic photoacoustic imaging using reference fluence method.
Mentink, Sven (2023) Isolation of Hepatocellular carcinoma (HCC) derived extracellular vesicles Using click-chemistry conjugated immunomagnetic beads.
Nasseri, Elham (2023) Development of Bio-inspired Hydrogels with Tunable Viscoelastic Properties for 3D Cell Culture.
Nazari Khoorasgani, Ali (2023) Volatile Fatty Acid Adsorption and Hyperthermia Regeneration of Magnetic Nanoparticle ImpregnatedResins.
Porsul, I.R. (2023) A metabolic support system for engineered (micro)tissues using glycogen-releasing cell-adhesive micromaterials.
Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.
Renselaar, Erwin van (2023) Scaling rules for microrobots with full energetic autonomy.
Roekevisch, Babet (2023) The effect of variant glucose and oxygen concentrations on the differentiation of humane mesenchymal stem cells (hMSC).
Scholten, J.N. (2023) Isolation of fibroblast derived extracellular vesicles using magnetic beads and click chemistry.
Slob, J.V.M. (2023) Towards multiplex detection of hypermethylated DNA biomarkers on a droplet digital recombinase polymerase amplification platform.
Sojati, Rilda (2023) Solvent Annealing as a post-treatment: towards single crystalline epitaxial MAPbI₃.
Toet, M.J. (2023) Development of a Ligament-on-Chip Aligning PDL-hTERT cells on a PDMS membrane.
Uijthof, E.M.T. (2023) Physics-informed reinforcement learning for process design.
Vliet, Annemiek van (2023) Combining CRISPR/Cas12a and gold nanoparticles to detect low sample concentrations of nucleic acids.
Warmink, Lucas (2023) Structure-property correlations of hybrid networks from Poly(trimethylene carbonate-co-ϵ-caprolactone) and human recombinant collagen.
Weening, N.A. (2023) The development of single layer hollow fibers based on PES and PVP K90 for outside-in dialysis.
Wiggerts, Stijn (2023) Optimalisation of mpeg length and MPEG/DNA densities for AUNP functionalization.
Wijland, Casper van (2023) Deuterium NMR and Intracellular Tumour pH Measurement.
2022
Bonnema, M.J.S. (2022) Inline Micro-fluidic Relative Permittivity Sensor Based on Silicon Wafer Technology.
Dan, C. (2022) Electrospinning and characterization of ZrO2 nanofibers functionalized with palladium sites.
Iyer, Logonadhan (2022) Low temperature combustion kinetics of high mineral paper sludge char particles.
Michorius, M.X.R. (2022) The use of Rayleigh-Raman scattering to investigate milk fat globules.
Nguyen, Q.H. (2022) Machine learning in the calibration process of discrete particle model.
Pouw, Fienie (2022) Oxygen sensing in a 3D cell culture using an oxygen-sensitive dye based on a Ru(II) complex.
Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.
Rops, Joyce (2022) Early Detection of Cervical Cancer via Cas13a Mediated microRNA Detection.
Steenbergen, J.J. van (2022) Implementation of proximity ligation assay to quantify low protein concentrations in low volume samples.
Steenge, Céline (2022) Establishing a thermal atomic layer deposition process for AlGaN.
Stronkman, Eva (2022) Item availability restricted.
Szewczyk, J. (2022) Item availability restricted.
2021
Baltima, Anastasia-Anna (2021) Sustainable Energy Planning on the Power System of the Greek Islands based on Green Hydrogen development (Case study: The Island of Crete).
Duursma, I. (2021) A novel strategy for the treatment of osteoarthritis by restoring joint homeostasis using natural antagonists.
Elbert, Thieme (2021) Using FRET probes to determine state of disassembly of cowpea chlorotic mottle virus.
Hofsteenge, J.W. (2021) Implementation and Validation of FGM in CFX for the Description of Turbulent Non-Adiabatic Premixed Combustion.
Horsman, B.F. (2021) A first principles study on the ferroelectric properties of the phases of hafnia.
Rangel, V.R. (2021) 3D Bioprinting in Bioactive Embedding Bath Cartridges for the purpose of Vascularization.
2020
Blees, Ricardo (2020) Incineration or pyrolysis for processing un-separated household waste? : An exploration of pyrolysis for non-recyclable but flammable household waste within a case study.
Boggelen, C. van (2020) Removal of volatile organic compounds and other odourous compounds using ozone generated by UV-C light in aerobic digestion installations.
García Martínez, J.B. (2020) Study of water adsorption on an amine adsorbent for Direct Air Capture of CO2.
Hogenberk, F. (2020) Moleculaire dynamica simulaties in het voortgezet onderwijs.
Hunt, I.Y.S.E. (2020) Kelvin's thunderstorm.
Marquez Ortiz, Aislinn (2020) Improving the mechanical properties of woody thermoplastic by reinforcing with short fibers (Pine Wood).
Tjeerdsma, D. (2020) Reaction pathways in the dehydration of propyleneglycol over scandium oxide catalyst.
Veldscholte, ir. Lars (2020) Coarse-grained Molecular Dynamics Simulations to Study Vapour Solvation in Polymer Brushes: On the border between polymer physics and computational science.
Villavicencio Arzola, P.O. (2020) Primary interactions between cellulose and lignin during fast pyrolysis of lignocellulosic biomass.
2019
Benet i Bertran, Joan (2019) Computational model of action selection in Parkinson's disease and the effect of deep brain stimulation.
Hartog, Tessa G. den (2019) A supramolecular hydrogel system for 3D embedded bioprinting.
Hoeven, S. van der (2019) Miniaturization and Characterization of a Ruthenium Oxide Potentiometric pH Sensor for Organs-on-Chip purposes.
Nauta, L. (2019) Bioprintability of Dex-TA/HA-TA hydrogels with human iPS cells for cartilage tissue engineering.
Pazos Urrea, Monica (2019) Concentration and Esterification of Lactic Acid in Complex Coacervates.
Shea, Gary (2019) Item availability restricted.
Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.
2018
Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.
Hendrix, J.M. (2018) Impedimetric analysis of the activity of single fluid cracking catalyst particles.
Kambartsumjan, Arthur (2018) Optimizing the process of nitrite measurement.
Veerbeek, I.H. (2018) Toetsanalyse bij havo 4 in de scheikunde sectie op het Noordik te Almelo.
Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.
2017
Cloet, J.M. de (2017) Extracting the reaction kinetics of the formation of CIGS from in-situ X-ray diffraction measurements.
Derckx, E.G.H (2017) The Influences of Hydrogel Geometry on the Desalination of Salt Water.
Dijkhuis, D.G. (2017) Mass transfer in titania photocatalytic membrane reactors.
Eijsker, J. (2017) Investigation of immiscible liquid-liquid displacement in Slippery Liquid Infused Membranes (SLIM).
Hopman, Niels (2017) De ontwikkeling en het testen van een praktische module scheikunde : de synthese van een biologisch afbreekbaar plastic. poly(ε-caprolacton)(PCL).
Jorissen, Koen F.A. (2017) Transport Phenomena in Monolayer Graphene Membranes.
Kamphuis, E.C. (2017) Desalination on Microscale - The Effect of Salt Concentration on the Desalination Performance of a Microfluidic Device.
Knoef, M.J. (2017) Attending to the knowledge, skills, and attitudes of teachers and students : guidelines for context-based chemistry curricula.
Li, Jing (2017) Patterning porous catalyst using wettability contrast and kinetic study of fructose dehydration.
Mok, S. (2017) Passive removal of electrochemically produced hydrogen gas in a microfluidic device.
Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.
Schellevis, H.M. (2017) The effect of membrane topology features on ion transport phenomena.
Schut, Thomas (2017) Sensing of multiple parameters in a micro-fabricated flow system.
Timmerhuis, N.A.B. (2017) Two (L-L) and three (G-L-L) phase extraction processes in capillaries with heterogeneous surface wettability.
Veldscholte, Lars (2017) Birch-type reduction of anthracene by field emission of electrons in microreactors.
Wiegerinck, H.T.M (2017) Measurement of the velocity and viscosity of fluids in a micro channel with Optical Coherence Tomography.
2016
Bergsma, M (2016) Item availability restricted.
Harder, C.M.L. (2016) Practicum ‘Verbrandingswarmte kaarsvet’ in 4 havo : problemen en mogelijke oplossingen.
Hilgerink, T. (2016) On-Chip HPLC analysis of drugs of abuse - Analysis of cocaine, morphine and their metabolites using an on-chip HPLC system.
Thirukokaranam Chandrasekar, Krishna Kumar (2016) Tracking and Control of Soft, Self-Folding Miniaturized Agent using Ultrasound Images.
Vollenbroek, J.C. (2016) Design and characterization of a microreactor for monodisperse catalytic droplet generation at elevated temperatures and/or pressures.
Wolf, T. (2016) Design of an Air Factor Sensor based on Light Emission.
2015
Blom, M.J.W. (2015) Evaluation of gasification efficiency of glucose and sorbitol under hydrothermal reforming conditions in an autoclave batch reactor.
Goor, C. van de (2015) Influence of temperature and pH on the hydrogen evolution reaction (HER) on platinum.
Koolstra, Rense (2015) Photocatalytic watersplitting with WO3 and SrTiO3 : Rh on a chip.
Kroes, Jorrit (2015) Optimization of temperatures in a condensing CO2 to methanol reactor.
Menke, R. (2015) Fabrication of a full-ceramic hydrophobic membrane for water desalination.
Plugge, M. (2015) Researching the stability of CaO from different precursors under varying absorption times.
Sikkink, M.A. (2015) Experimental investigation of the overlimiting current in a micro-nanochannel system : opportunities and pitfalls.
Timmerhuis, N. (2015) In-situ characterization of thin layer polysulfone in water-toluene mixtures.
Vasileios, Papadimitriou (2015) Templated Activated Carbon for Electric Double Layer Capacitors.
Wel, T.P. van der (2015) 1D numerical analysis of heat transfer in supercritical water in a heated tube and a single shell and tube heat exchanger.
Zwieten, Ralph van (2015) Debottlenecking bij FrieslandCampina Domo Borculo.
2014
Moll, Lüders (2014) Item availability restricted.
Rooijen, MSc M.J. van (2014) Characterization of capacitive deionization concentration profiles for small volume sample preparation.
Veltkamp, Henk-Willem (2014) A plug based micro solid phase extraction (uSPE) microfluidic chip for the isolation and purification of DNA.
2012
Bullee, P.A. (2012) Oleophobic surfaces by PDMS molding : from simple techniques to advanced surfaces.
Geessinck, Jaap and Gerritsen, Maikel (2012) Maximizing the piezoelectric properties of thin film Pb(mg1/3Nb2/3)O3-PbTiO3.
Veerbeek, Janneke (2012) Electrochemically controlled gradients : towards directed motion of molecules.
2011
Dijk, Vic van (2011) The influence of water vapour on the photocatalytic oxidation of cyclohexane in an internally illuminated monolith reactor.
Groen, Maarten (2011) Investigation into the transport properties of isolated FePt nanoparticles using STM.
Schagen, M.V. van (2011) Item availability restricted.
Wilbers, Janine (2011) The Flip-chip concept: A new way to electrically characterize molecular monolayers.
Zijlstra, B. (2011) Devices for spin injection & detection in graphite.
2010
Nijland, Maarten (2010) Anything you build on a large scale or with intense passion invites chaos.
2007
Roghair, I. (2007) Development of an experimental method to investigate the hydrodynamics in a fluidized bed using PIV and DIA.
2005
Song, Chunlin (2005) Influence of water vapor on silica membranes: Effect of sorption and percolation.
2002
Zeilstra, C. (2002) Validation and verification of a discrete particle model in a pseudo 2D (spout-)fluid bed using pressures and digital images.