University of Twente Student Theses

2024

Aponte Urmeneta, J.M. (2024) Multitone Measurements for the Characterization of EMI Filters at High Power Levels.

Auke, Rasing (2024) Integration of crossdocking facilities in an existing outbound logistics network.

Bakker, Tjeerd (2024) Voidless Contour-Parallel 3D Printing via Recursive Shape Segmentation and Adaptive Line Width.

Bettonvil, L.M. (2024) Improving the Service Process using Simulated Annealing at Company X.

Braake, J. ter (2024) Deriving Data Stories from the GAEA Geospatial Tool.

Chen, G. (2024) Serious Game Prototype for mapping Greenhouse Data to the Semantic Sensor Network Ontology.

Florax, MSc Anna A. (2024) Haemodynamics during surgery: patient’s blood pressure management and optimisation.

Harbers, Job (2024) Characterization and modeling of a thermal conductivity sensor for liquids.

Heegde, K.G.H. ter (2024) Design and Development of a Computational Framework for Patient-Specific Preoperative Planning of Robotics-Assisted Minimally Invasive FEVAR Interventions.

Heijn, A. (2024) Liver respiratory motion estimation using a-mode ultrasound as surrogate signal and LTSM networks as correspondence model.

Jong, H. de (2024) Finger Vein Pattern Recognition Using a Contact Sensor.

Kanger, B.J.D. (2024) Bound-preserving limiting methods for Hybrid-DG discretization of linear advection equations.

Kersten, J. (2024) Predicting the Formation of Disinfection Byproducts Using Environmental Parameters in Chlorinated Drinking Water.

Kloppenberg, J.B. (2024) Expanding VDL ETG Almelo’s supplier base in the Iberian Peninsula to enhance supply chain resilience.

Koeleman, T. (2024) Optimizing the Scheduling Method for the Metal Plate Production Process.

Koops, I.S. and Laar, A.H.S. van and Zaagsma, J. (2024) Eindsystolische Druk-Volume Relatie tijdens Positieve Drukbeademing.

Kramers, I.M. (2024) Design and Assessment of an XR-guided MRI Interface and Intuitive Scan-plane Control.

Kroeze, Daan (2024) On accelerated fatigue testing of elastomeric materials : The development of a new methodology.

Kuijper, I.K. (2024) An Interactive Approach to MRI-based Interventional Navigation.

Laak, W. ter (2024) A Stochastic Bilevel Model to Study the Market Power of a Strategic Wind Power Producer in the Norwegian Auction-Based Intraday Market.

Lammens, Vera (2024) Designing and developing a working prototype for measuring the flowrate and composition of human breast milk.

Los, Daniel (2024) Using frame rotations based on movement direction to improve reaching event detection from IMU data.

Lukkes, A.S. (2024) Design and validation of a control algorithm for an anti-lock braking system on off-highway vehicles.

Mastwijk, I.J. (2024) Optimizing the Preparation Stage at Kvadrat Shade : A Simulation Study.

Mijle Meijer, Joep K. van der (2024) Advancing Control Methods for Biohybrid Microrobots : A Focus on Vertical Rolling Locomotion.

Mots, André de (2024) Concentrated Equity Portfolios for Pension Funds : Evaluating Concentrated Portfolio Approaches Based on Modeled Client Satisfaction and Expected Excess Yield.

Mulders, E. (2024) Analysis of Breast Physiology During Milk Extraction Measured With Diffuse Optical Spectroscopy.

Mört, Jelle (2024) The influence of shear stress on Human Mammary Fibroblast to induce CAF-like characteristics.

Neut, Leon M.B. van der (2024) Algorithm and Administrator : An exploration of responsible administrative practices when working with machine learning models.

Neut, Leon M.B. van der (2024) Algorithm and Administrator : An exploration of responsible administrative practices when working with machine learning models.

Nieuwenhuizen, Julian van den (2024) The evaluation of the conditioning task regarding probabilistic databases.

Noort, Luc van (2024) Sensor Framework For Pediatric Cerebral Palsy Ankle Foot Orthosis : Development and Technical Validation.

Perijoc, S.N. (2024) Quantum AI for Application in Industry : A Workflow Model.

Rappange, Sam (2024) Leveraging Graded Similarity in Self-Supervised Learning.

Redeker, S. (2024) Bike Ego-Trajectory Mapping Using a CNN-LSTM With IMU and Monocular Camera.

Roelink, D.J. (2024) Optimization of return freight selection.

Rooij, R.N. de (2024) Cardioprotective drugs to inhibit DOXO-induced cardiotoxicity in combination with trastuzumab for HER2-positive breast cancer treatment.

Schilt, Elise (2024) Accelerating MRI with optimized sampling patterns in Pulseq.

Schram, D.A.D. (2024) Effect of Prior Relationship on Attention-seeking Touch.

Shah, Hafiz Muhammad Amin (2024) A User Centric Approach to Visualizing Linked Educational Metadata in The ITC Geo Course Hub.

Vlooswijk, A.G.M. (2024) Effects of adopting a flexible scheduling framework on a radiology department : a multi-stage stochastic program on a rolling horizon integrating employee and resource scheduling based on demand.

Wille, D.L. and Arnold Bik, F.C.L.J. and Zeilstra, A.S.W. and Kaiser, N.E.A.N. (2024) Het ontwerp van een biomimetisch pulsatiel systeem aan de hand van een Simulinkmodel ter preservatie en monitoring van een levende homograft.

Zentveld, B.N. (2024) Improving BearingPoint Netherlands’ consultant-to-project KPIs by introducing a consultant-to-project assignment model.

Zijlstra, M.A. (2024) The influence of fluid flow on trapped protoplast in a microfluidic device.

2023

Andrei, Vlad-Cristian (2023) The security impact of DNS and TLS on the websites reconnaissance process.

Bakker, Mirjam (2023) Workload Prediction for the V310 : An application of linear regression and time study to make an estimation on required man hours.

Bree, K.D.E. de (2023) Development of a convolutional neural network for the detection of the levator plate : a U-net based structure for MR image segmentation.

Broek, Desmond van den (2023) Creating a general process to measure API performance : generating a KPI-driven dashboard at Air France KLM.

Buijs, F.A.H. (2023) The effect of charged single chain polymeric nanoparticles on alpha-synuclein aggregation in SH-SY5Y cells.

Davenschot, Jan Henk (2023) Fabrication and characterization of mesh electronics and in vitro metal electrode arrays.

Dijk, Nathan van (2023) Advanced wildlife camera trapping using embedded AI machine vision.

Doychev, K. (2023) Need for convergence speed : how do graph metrics influence the convergence speed of Markov chains?

Flake, Beitske (2023) Network Inference-Based Prediction of Epidemics: A Case Study on Mexican State COVID-19 Infection Counts.

Glas, Vera (2023) Application of the fast flood simulation model for local risk-informed decision-making on flood risk reduction : a case study of Pamba Basin, Kerala India.

Graaf, Silas de (2023) Investigating Availability Computation with Exponential Failure Rates and Fixed-Time Repair Delays.

Harten, J.L. van (2023) Improving Inventory Policy within Thales Supply Chain.

Hoogendoorn, J.A. (2023) A capacity-driven due date assignment and workload spreading approach in a make-to-order production environment.

Hornman, A.E. (2023) Parametric Study of Scaling Rules for a PEM Fuel Cell in Untethered Microrobots.

Hunsicker, C.F. (2023) On machine learning approaches to forecast non-life insurers’ loss reserves.

Jansen, B.J. (2023) Modelling the dynamic greenhouse gas emission intensity of the Dutch electricity grid.

Jensema, S.J.J. (2023) Improving the storage capacity of Twence’s central warehouse by testing alternative layouts.

Kok, L.W. (2023) Investigating end-to-end logistics : a strategic analysis of intermodal transportation.

Kok, M.R. (2023) Household electricity load forecasting for demand side management applications.

Kraker, L.M. de (2023) Innovation Focus Areas for Cervical Cancer Brachytherapy Treatment in Academic European Hospitals.

Maas, T.J. (2023) Qualitative comparison of State of Charge prediction models for battery energy storage systems.

Macarie, Mihai (2023) Fuzzing Android Automotive's CAN interface.

Morales Ortega, Luis Rodrigoandrés (2023) A Digital Twin for Ground Water Table Monitoring.

Morsink, C.F. (2023) Setting the Tone : A Phantom Study on the Effect of Skin Pigmentation on Transcutaneous Bilirubin Measurements.

Nijhuis, Chiel (2023) Modelling Obsolescence Resolution Strategies at Thales Hengelo.

Peters, D.J.T. (2023) Integrating operational and tactical decision-making in spare part inventory management.

Plomp, Jelle (2023) Imaging Behind the Plaque - Improved Blood Flow Imaging Using ISAAC: an Iterative Scheme for Active Attenuation Correction.

Plomp, Dhr. Jelle (2023) Imaging Behind the Plaque - Improved Blood Flow Imaging Using ISAAC: an Iterative Scheme for Active Attenuation Correction.

Renselaar, Erwin van (2023) Scaling rules for microrobots with full energetic autonomy.

Rolfes, Stan (2023) Item availability restricted.

Sakr, A. (2023) Electrostatic Simulation of Bi-Implanted Silicon Single-Electron Transistor Nanodevices.

Scheffer, Lars (2023) Hoffas’s Fat Pad-on-Chip : Optimization and Characterization of Dextran- Hyaluronic Acid - Gelatin Hydrogels to Mimic the HFP Extracellular Matrix.

Sterenborg, N.E. (2023) Lightweight online Kalman-filter-based sensitivity estimator for distribution grids utilizing phasor measurements.

Velthuis, D.T.J. (2023) Accelerating iterative methods for the anisotropic radiative transfer equation using Anderson Acceleration.

Warmink, Lucas (2023) Item availability restricted.

Weij, M.E.C. van der (2023) The semi-automatic classification of patients with RBD and PD based on a new automatic EM detector, manual sleep stage scorings, and machine learning methods.

Wit, L.J. de (2023) Truck inventory replenishment process optimization at REMONDIS Smart Infra.

Wopereis, Sanne (2023) Capacity planning model in a home care environment.

2022

Albers, Etiënne H.M. (2022) Environmental considerations in supply chain decisions: Proposing a new methodology for locating cross-docking terminals considering CO2e emissions.

Bante, Gidon (2022) Characterization of circulating tumour cells in prostate cancer: viability and secretion studies after enrichment with EpCAM targeting ferrofluids.

Bosman, D.G.J. (2022) Design of a leaf holder for real-time microscopy in the context of precision farming.

Bulsink, R.E. (2022) Enhancing imaging depth of handheld LED-based photoacoustic imaging.

De Alba Alvarez, Irina (2022) Rapid Frequency Offset Mapping with the Half Fourier Acquisition Single-Shot Turbo Spin-Echo with the Selective Parity Approach.

Dijkstra, Ing. R.J. (2022) Offshore Inventory Management (Inventory management of Main Components from offshore wind turbines by statistically predicting expected failures using historical failure data to determine optimal stock levels).

Emmen, J.H.F.M. (2022) Predicting the impact of block scheduling on patient waiting time for MRI resources : a simulation study at the Isala hospital.

Eversmann, H.Y.N. (2022) Whole Life Carbon Thinking : market and data analysis of whole life carbon in Dutch renovation projects.

Ghiauru, Cosmin Gabriel (2022) Exploring the efficacy of Fresnel Zones in the context of fully unobtrusive wireless stress signal detection.

Grievink, Guus (2022) Model-based Probabilistic Diagnostics of Cyber-Physical Systems.

Haitjema, A. (2022) First steps towards reducing chronic low back pain in horseback riders : objectifying biomechanical parameters using inertial sensors.

Iyer, Logonadhan (2022) Low temperature combustion kinetics of high mineral paper sludge char particles.

Jelsma, Susanne (2022) Structural and effective brain networks in focal epilepsy.

Konda, Mayuresh Vasudevan (2022) Social Touch: Investigating the effect of mediated social touch on social presence.

Matser, Iris (2022) Soft-tissue tuning in a personalized musculoskeletal knee model using quantitative comparison between simulated and intraoperatively measured knee laxity.

Mayer, Tom (2022) Improving the Service Level by Implementing a Nearshoring Sourcing Strategy.

Meijer, M. (2022) EEG alpha power in acute and subacute patients with mild traumatic brain injury.

Meuleman, Jelmer David (2022) Automated 120° MMI Based Downconverter Design.

Moort, M.R. van (2022) Aiming for circular solar energy : the development and evaluation of a method for neutralising the environmental impact of a company’s value chain.

Nieuwenhuys, W.W. (2022) The comparison of the accuracy of camera-based skeleton trackers during the stepping response for recovering balance in a home based environment.

Nijhof, E.Y. (2022) Planning interdependent tasks in house construction - an extension to the critical path method.

Nousi, Irnti (2022) Item availability restricted.

Paalvast, A.S. (2022) Missing data in continuously monitored vital signs of high-risk surgical patients.

Pennestri, Pietro. (2022) An FPGA based sensor fusion algorithm for IMU data processing.

Poelarends, R.J. (2022) Channel reduction for EEG recordings of nociceptive evoked brain activity.

Verschuur, P.G. (2022) Estimating the white-collar hours with statistical learning.

2021

Benneker, Bram G. (2021) Development of a Cost Price Model to Support Bid Price Estimation.

Brant, Maurits (2021) Driving Eurol's production scheduling forward with scheduling algorithms: A case study.

Bustraan, M.C. (2021) Developing quadratic programming constraints for human safety : an application of unified safety criteria to multi-task robot control.

Ekkelenkamp, D.H. (2021) Adding higher-order situation awareness components to a platoon commander's battle management system.

Elbert, Thieme (2021) Using FRET probes to determine state of disassembly of cowpea chlorotic mottle virus.

Hoogerheide, B. (2021) Identification of patient profile clusters and their characteristics for ICU-admitted COVID-19 patients.

Horlings, Wouter (2021) Evaluation of a feature-based design method for rapid development of hardware in Cyber-Physical Systems.

Kaal, Joris (2021) Enabling Chip Characterization & Providing Chip Information : Characterizing fluid flow in a microphysiological system using PIV-experiments, Lattice-Boltzmann and COMSOL Multiphysics simulations and creating a tool to provide this information to users with a scenario-based rapid-prototyping co-creation process.

Kok, L.W. (2021) Modelling the total cost of ownership of stock materials at VDL Energy Systems.

Martens, M. (2021) Adoption and implications of CBDC : an agent-based modelling approach.

Meijer, T.G.J. (2021) Improving the tactical planning process to stabilize the workload.

Morrenhof, M.A. (2021) Using mathematical modelling to create a driver schedule while taking scheduling restrictions into account.

Motamedi Nia, Sandra (2021) The Capability of Machine Learning for Predicting Disability Probabilities based on Long-term Absenteeism.

Niekolaas, M. (2021) Towards real-time placental surface reconstruction during fetal surgery : deep-learned placental vessel identification and segmentation.

Niessink, Tom (2021) In flow magnetophoresis : explorative research towards a cancer watch.

Nijhuis, C.G. (2021) Analyzing the production capacity of Company X.

Noort, L.M. van (2021) Pain scales in monitoring functional recovery of patients with hip fractures.

Overmars, D.M. (2021) Modelling uncertainty in a configurable environment : a case study at Pan Oston.

Petter, J. (2021) Adopting reinforcement learning in operational spare part management : visualizing the black box of decision-making.

Ploeg, A.G. (2021) Designing a Blueprint Schedule for the Pre-Treatment Phase Appointments of Patients of Instituut Verbeeten: Tactical Multi Appointment Planning.

Roelink, Daniël (2021) Improving the batch handling of the container-series line at Easy Sanitary Solutions.

Schepop, L. van de (2021) Versatile microfluidic circulation to valuate tumor cross-talk using a multi-organ-on-chip approach.

Schouten, Daan (2021) Towards Near Real-Time Monitoring of the Ablative Margin during the MR-Guided Cryoablation of Prostate Tumours.

Schrijver, R. (2021) Machine-learning algorithms in wave-confinement analysis.

Snoeijink, L.H. (2021) Room temperature characterization of DopantNetwork Processing Units. And optimization of the measuring process.

Toapanta, Danilo (2021) Investigation of ranging capabilities with Bluetooth Low Energy : how can we effectively estimate the range between a (commercial off the shelf) BLE beacon and a BLE receiver (locator)?

Togtema, M.H. (2021) Nerve Fiber Modelling for Improved Understanding of the Electrocutaneous Interface in the Context of Pain Diagnostics.

Veneman, R. (2021) Real-time skin cancer detection using neural networks on an embedded device.

Waardenburg, F.H. (2021) Mirror therapy in virtual reality by a brain-computer interface for amputees experiencing phantom limb pain.

Wattel, N.J. (2021) Routing of shunt trains at logistics hubs of NS using constraint programming.

Welling, S.A. (2021) Improving the allocation of cream for FrieslandCampina.

Wijk, M.W.M. van (2021) Optimized MRI techniques for image-guided holmium-166 SIRT.

Zentveld, B.N. (2021) Optimising the batch sizes and inventory parameters for Twentsche Kabelfabriek BV.

Zwanenburg, M.I. (2021) Process Design and Resource Allocation at the ProRail ERTMS Integration Lab.

Zwiers, R.J. (2021) A modified cheapest insertion heuristic for the multi-objective pickup and delivery open VRP with time windows for a homogeneous fleet with heterogeneous freights : a case study.

2020

Bakker, Michiel (2020) Model validation for stochastic hybrid automata.

Bongertman, M. (2020) Geometric state estimator tightly-coupling force and pose estimation for interaction in vision-denied environments.

Brands, Kirsten (2020) Improving Material Availability using a Control Tower for Service Tools.

Christenhusz, M.T.M. (2020) 2D Box Traps for Bose-Einstein Condensates.

Ekris, C.J. van (2020) Pump diagnostics using machine learning.

Eleveld, N. (2020) Near-Infrared Spectroscopy and Transcranial Doppler Sonography for the estimation of Cerebral Autoregulation after Intra-Arterial Thrombectomy for Ischemic Stroke.

Fopma, Remmelt (2020) Item availability restricted.

Galen, J.A.N. van (2020) Setting up circularity objectives to structurally implement circular construction.

Hendrikx, Cedric (2020) Characterization of segregation in nanometer thin films using hybrid X-ray measurements.

Heuveln, J. van (2020) Defining and analyzing smart yards : a simulation study.

Horstink, S.F. (2020) Funnel cruise control with input saturation.

Hélant Muller, C. (2020) The effect of direction and fatigue while running on an athletic track on kinematic inter-limb difference.

Kaptein, J.A. (2020) Gold nanoparticles for biosensing.

Kok, M.R. (2020) Biologically Realistic Artificial Neural Networks.

Koning, S. (2020) Modelling and visualizing emergency egress.

Lankheet, S. and Pieterse, M.M. and Rijnhout, R. and Tuerlings, E. (2020) Item availability restricted.

Lomillos Rozeboom, I. (2020) Beamforming performance evaluation with impact of user model electric properties.

Macarie, M. (2020) DNS bitsquatting in the wild.

Maljaars, M (2020) An advice to improve the short-term return forecast.

Mohamed, Marwan (2020) The future of the green hydrogen production from offshore energy systems in accelerating the energy transition : analysis in the Dutch context.

Nies, S.H.G. (2020) Machine learning for intent recognition in a powered knee prosthesis.

Prabakaran, D. (2020) Solving the barge routing and scheduling problem with a hybrid metaheuristic.

Quattrocchi, J. L. (2020) Reaction-Diffusion patterns modelled by Continuous-State Cellular Automata.

Rijnbergen, K.J. (2020) Improving the effectiveness of phishing detection Using lexical semantics; A machine-learning based approach.

Saravanan, i Adharshna (2020) Development of a Myocardial Perfusion Tube Phantom: Analysis of Tissue perfusion by contrast kinetics.

Slaa, Gunnar (2020) Increasing cardiac arrest survival by improving the volunteer alerting algorithm.

Toontje, Rivano William (2020) Energy future for the new Indonesia’s capital city :an energy modelling approach.

Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.

Wennen, M. (2020) Effects of positive end-expiratory pressure on the diaphragm : an MRI study of critical illness associated diaphragm weakness.

Yakovyna, Andriy (2020) Industry 4.0 transition strategies for Ukrainian construction SME’s.

Zadelhoff, L.D. van (2020) Assigning inbound flights to baggage retrieval belts: A simulation study on the impact of stochasticity on the performance of different assignment heuristics.

2019

Aanen, A.M. (2019) User-controlled routing to implement configurable delay elements in FPGAs.

Antonides, L. (2019) Improving the on-time delivery performance at PM.

Braem, C.I.R (2019) The Philips wearable biosensor in transcatheter aortic valve implantation treatment workflow. Usability and feasibility of the wearable biosensor.

Burgers, T. (2019) Epididymis-on-a-chip device : a unique approach to study tight barriers in the human male reproductive system using ex vivo tissue.

Bussmann, N.H. (2019) Predicting Arrival Times of Container Vessels : A Machine Learning Application.

Ekelmans, P.D.A. (2019) Item availability restricted.

Ginneken, C.L. van (2019) Settlement of cross-border transactions through Central Bank Digital Currency (CBDC) : analysis from a risk management perspective.

Heijdens, R.H.M. (2019) Design of a mastitis indicator sensor.

Hove, E.M. van (2019) Train routing at the Shunt Yard : a Disjoint Paths approach.

Janbroers, J.M. (2019) Developing an MR safe calibration and interface module for pneumatic stepper motors.

Karis, J (2019) Linehaul Forecasting at TNT.

Leeuwen, K.G. van (2019) From scan to speech : articulation analysis from real-time vocal tract MRI.

Manen, R van (2019) Automating the capacity planning process for a distribution centre : comparing heuristic and integer programming approaches.

Matei, Denisa Alexandra (2019) Detection of Health Problems based on Historical Medical Records.

Mentink, T.J. (2019) Redesigning after-sales services supply chain.

Mesman, BSc S.P.M. (2019) Optimisation of patient blueprint schedules with downstream departments and uncertain care pathways.

Napel, Ir. J.H. ten (2019) Design, fabrication and characterisation of a multi-purpose undirectional recirculation unit on-chip.

Ommeren, Coen van (2019) Reduce the variance and duration of outsourced repair lead times.

Overmars, C.C. (2019) Production line improvement at Bosch Thermotechniek.

Polman, Harmen (2019) A Code for Refractive Index Matched Scanning Data Processing.

Sibma, Steven (2019) Electron Transport through single-bismuth transistors.

Smorenburg, S.P.M. (2019) Preoperative planning and intraoperative image fusion improvement during endovascular aneurysm repair.

Stienissen, S. (2019) Decreasing the Workload at a Mental Healthcare Institution: a simulation study.

Sulzer, Niels (2019) Hardware-Efficient Real-Time Statistical Analysis on Streaming Data.

Tiel, L.P.T. van (2019) Does preoperative breast MRI lead to an improvement of survival of breast cancer patients in the Netherlands?

Visser, L.E. (2019) Navigation for PDT in the paranasal sinuses using virtual views.

Vosman, M.J. (2019) Model optimization and parameter estimation in a bi-hormonal model of glucose dynamics in type 1 diabetes mellitus patients.

Weersel, S. van (2019) Preference learning: What defines an optimal shift schedule?

Zwiers, R.J. (2019) Determining the optimal warehouse location.

2018

Boelders, F.B. (2018) Developing a Ready2Help Application.

Bos, H. (2018) Determining Bed Capacity using Mathematical Optimization.

Bronsvoort, Sandra (2018) Long-term replacement planning for Royal Schiphol Group : an Integer Linear Programming model.

Enthoven, M.M.F.C. (2018) Error Analysis of Optical Self-Localization using Mapped and Distinguishable Beacons.

Hameete, Annoeska and Waldner, Simon and Luit, Lisette and Smits, Karin (2018) Ontwikkeling en validatie van een tumor-on-a-chip systeem voor het bepalen van de meerwaarde van radiotherapie als adjuvante therapie bij synoviaal sarcoom.

Hirtum, A.J. van (2018) The nucleation and growth of hydrogen bubbles generated by electrolysis on ordered artificial sites.

Jurrius, P.A.G.T. (2018) Intraoperative fluorescence imaging for the assessment of excision margins and lymph node involvement in breast cancer using EMI-137.

Kikke, N.Y.S.A (2018) Optimal capacity planning with uncertain supply in a whitefish processing plant.

Kruijff, O. de (2018) Using additive manufacturing for rapid tooling of obsolete spare parts in the aerospace industry.

Luinstra, J.M. (2018) Reducing workload fluctuations through causal forecasting : a case study in the plaster room of Sint Maartenskliniek.

Muller, I.J.T. (2018) Improving the service control tower with proactive decision making : a two-staged alert and intervention generating model for proactive lateral transshipments in an after-sales supply chain.

Nazarian, Arthur (2018) Optimizing the deployment of automated external defibrillators by a data-driven algorithmic approach.

Oude Nijhuis, K.A. (2018) Monitoring and controlling critical process parameters at the retort production line of Abbott Zwolle.

Pruijn, S.E. (2018) An algorithm for scheduling containers on barges.

Snippe, M.J.W. (2018) On the application of extreme interaction torque with an underactuated UAV.

Speldekamp, T.J. (2018) Disability insurance : predicting accurate inflow probabilities in an imbalanced data setting.

Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.

2017

Alferink, K.M. (2017) The quantitative and qualitative differences between the locations of an Acute Medical Unit.

Dijks, J.P. (2017) Optimization of replacement times of soft parts in gas pressure control systems.

Erp, Giel W. M. van (2017) Applying the Flow Optimization Model: Dynamic Charging on the Dutch National Roads.

Groot Dengerink, M. (2017) Optimisation strategy of the incoming supply in the sorting process at PostNL depot Hengelo.

Hobert, Eddo (2017) 3D Printed flexible fingertip strain sensor.

Hoogterp, H. (2017) Crop harvesters feed us, but how do we feed them?

Hudepol, C.E. (2017) Novel markers for detection of CTCs without EpCAM expression.

Jonkman, Remi (2017) Implementation of a reliable 2D approximator using sonar.

Okken, B. (2017) Design and Empirical study of tilting propellers of an over-actuated quadrotor.

Opheusden, L.M.E. van (2017) Design of a control strategy for obstacle crossing in a lower limb exoskeleton for SCI patients.

Prins, N.M. and Ochten, M. van and Steen, D. van der and Wiggers, R.B.M. (2017) Designing a synthetic model of the esophagus to test efficacy and oxygen distribution of an intelligent oxygen delivery device.

Reiling, Nathan (2017) Item availability restricted.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Schenk, L. (2017) Comparison of medium access control protocols for ultra narrowband communication systems.

Schlief, J.G.L. (2017) Temperature optimization of the SuperParamagnetic Quantifier for comparison with standard methods.

Sieverink, S.A. (2017) Improving the alignment between the operating room department and the nursing wards : Changing the current operating room scheduling method in order to minimize the variability in bed utilization at the nursing wards.

Snaauw, G. (2017) Camera calibration for oblique viewing laparoscopes.

Snijders, T.G.A. (2017) Redesigning a food assembly process at KLM Catering Services.

Thomasson, S.A. (2017) Improving forecast performance of LPG demand.

2016

Benou, A. (2016) The effects of increased regulation on the performance of pension funds.

Fontijn, Sven (2016) Internal delivery planning of materials at the tile plant of Struyk Verwo Infra.

Hessels, Stefan (2016) Bridging the gap : from process mining to business process simulation.

Hoofs, M.A. and Huizing, T.F. and Meuter, B.C.G. and Nijhof, J.H. (2016) Electrophysiological techniques in combination with automatic facial photo analyses as a diagnostic tool for facial palsy.

Krediet, A.C. (2016) Developing and testing an APP model for Air Spiralo.

Meer, A.J.M. van der (2016) Mapping the underworld.

Sisso, T.J.C. (2016) Adaptive and Scalable Urban Traffic Control in an Indian Metropolis.

Speldekamp, T.J. (2016) Inzicht in de bedbezetting en personele inzet binnen een verpleegafdeling.

Tijhuis, Ruben J.J. (2016) Improving the handling of special orders at Scania Production Meppel.

ZOMPAS, A. (2016) Development of a three dimensional path planner for aerial robotic workers.

2015

Dunn, B.C. (2015) De toepassing van de EWMA-methode op het adverteermodel van Joosten (2015).

Kalcheva, D.K. (2015) Linked Data adoption and application within financial business processes.

Mentink, BSC. P.F. s (2015) Sustainable development? Exploring the social impact of mesocredit in emerging conomies using qualitative and quantitative performance indicators.

Prins, Yvonne (2015) Extending the PowerMatcher using dynamic programming.

Roo, M. de (2015) Optimal Event Handling by Multiple UAVs.

Sieverink, S.A. (2015) Het verlagen van de voorraden bij Aeronamic Almelo.

Valk, D.J. van der (2015) How accurately can sitting and the intensity of walking and cycling be classified using an accelerometer on the waist for the purpose of the “Global recommendations on physical activity for health”?

Zwieten, Ralph van (2015) Debottlenecking bij FrieslandCampina Domo Borculo.

2014

Barends, M.G.H.W. and Pieterse, R.G.M.G. (2014) Improving efficiency and patient experience of the Ambulatory Cardiology Program.

Erp, G.W.M. van (2014) Voorspellingsmodel, een nieuw voorspellingsmodel voor het aantal nieuw binnenkomende patiënten per tijdseenheid bij het Borstcentrum JBZ.

Groot Dengerink, Maaike (2014) Item availability restricted.

Haafkes, Werner (2014) Onderzoek naar een meer efficiënte inrichting van een bestaand logistiek centrum.

Kleef, N.T.M. van (2014) Making people matches using Supervised Machine Learning algorithms.

Meijer, E. (2014) Facility layout redesign at Siemens Hengelo: an integrated graph theoretic, manual and analytical approach.

Roelfsema, Melissa (2014) A Survey into the Strategic Alignment Efforts and Experiences of Organisations & A Method for Assessing Strategic Alternatives based on the Expected Return and Associated Risk.

Stijntjes, Ingo (2014) Assessment of automated crowd behaviour analysis based on optical flow.

Tijhuis, R.J.J. (2014) Onderzoek naar gebrek aan aanvoer bij de oplosstraten bij FrieslandCampina Domo Borculo.

Velden, L. van der (2014) Liquid-liquid two phase flow and solvent extraction in the squeezing regime with on-chip separation of phases.

Veltkamp, Henk-Willem (2014) A plug based micro solid phase extraction (uSPE) microfluidic chip for the isolation and purification of DNA.

Veneberg, R.K.M. (2014) Combining Enterprise Architecture & Operational Data To Better Support Decision-Making.

Westerik, P.J. (2014) MEMS acoustic sensors inspired by the locust ear.

2013

Brandt, L. van den (2013) Your LOS(S), Your Gain. Prediction tool for the hospital Length of Stay.

Keuter, D.R. (2013) Item availability restricted.