University of Twente Student Theses

2024

Akkermans, Ilse (2024) The Design of a Modular and Future-Proof Last-Mile Delivery Hub with Light Electric Vehicles : a 2024-2050 use case with Fulpra.

Aldenkamp, M.A. (2024) Soft Robotics Joystick using 3-D Printed Piezoresistive Sensors with Digital Avatar Interface.

Boom, B. van der (2024) Enhanced Predictability of Recycled Thermoplastic Composites : A study towards a better understanding of the recycling process.

Bui, Thai Ha (2024) A minimal nanoneuron capable of nonlinear classification.

Dalenoord, F. (2024) Item availability restricted.

Delfos, L. (2024) Wearable interfaces in voice performance.

Dulfer, Simone (2024) Towards the realisation of self-aligned nanometre scale tunnel field effect transistors.

Emous, J.J.J. van (2024) A feasibility study on poly-lactic acid and polyhydroxy-alkanoates application within the packaging portfolio of FrieslandCampina.

Engelen, F.H.A. (2024) Material preparation, design and production of an actuated 3D printed magnetic part.

Haalstra, E.C.T. (2024) Development of a solution to enable insightful decision-making in product development processes : a case study at Vepa.

Harbers, Job (2024) Characterization and modeling of a thermal conductivity sensor for liquids.

Holstege, Nadia (2024) Design and optimization of a devulcanization process for butyl rubber.

Kampstra, L. (2024) The occurrence of viscous shear heating within the cold rolling process.

Kareem, Jonas (2024) Fabrication and electrical characterisation of hexagonal GeSi nanowire devices.

Keshetti, Akhil Raja (2024) A Methodology for Evaluating Decision Support Systems in the realm of Steel Ladle Logistics.

Kossen, Jamie (2024) VHH surface modification to lipid nanoparticles for targeted osteoarthritic synovitis therapy.

Kroese, Niels J.J. (2024) A novel 3D-bioprinting platform for the formation of dense tissue fibres from dilute Newtonian bioinks deposited into thixotropic Xanthan Gum Embedding Baths.

Lamers, M.E.G. (2024) Process defects and resulting structure of unidirectional CF/LM-PAEK after induction welding.

Marina, Gomez Fernandez (2024) Exploratory Research on Crochet : Assessing its Potential as a Fabrication Technique for Soft Robotic Systems and Biomedical Devices.

Meuleman, Jelmer D. (2024) Exploring Nonlinear Dynamics : in Al₂O₃ Integrated Photonic Devices.

Mijle Meijer, Joep K. van der (2024) Advancing Control Methods for Biohybrid Microrobots : A Focus on Vertical Rolling Locomotion.

Monchen, Niek (2024) The production and characterisation of magnetic particles produced with in-air microfluidics.

Nijland, Chiel (2024) Analysing the Effect of High-level Irradiation on Contact Resistance in Solar Cells.

Olde Dubbelink, M.B. (2024) High Strain Rate Characterization of Mechancal Properties by Low Temperature Testing for Polymeric Materials.

Ottachchige, P.P. (2024) Interaction control with a 3D printed torque sensor in an impedance control framework.

Pamungkas, Mr. H.E.A.N. (2024) On the Relation Between Microstructure and Transverse Electrical Resistivity of Unidirectional Composites: An Evaluation Statistical Spatial Descriptors and a Quasi- 3D Resistor Network Model.

Reuling, Niek (2024) A pure sliding experiment to examine wear on possible coatings for greaseless open gears.

Saleh, E. (2024) Characterization of Electric Double-Layer Capacitors Using Electrochemical Impedance Spectroscopy.

Schalk, D. (2024) Machine design for Ex-Core industrialization.

Schildkamp, Rick H. (2024) 3D Printing of Shape Memory Alloy NiTi with Laser Metal Deposition.

Schmale, M.D. (2024) Ceramic Surfaces as a Source of Luxury in Handheld Devices: A Study on the Physical Attributes that Predict Luxury and how to apply these in technical ceramics manufacturing.

Smink - de Jong, E. (2024) Development of improved Mixed Matrix Membranes for haemodialysis in outside-in filtration mode : Towards improved dialysis treatment for patients with chronic kidney disease.

Vidulejs, Vits (2024) A DFT study of heterostructure-driven charge transfer in transition metal perovskites, or a computational look at LaFeO3, LaCoO3 and LaNiO3.

Vidulejs, Vits (2024) A DFT study of heterostructure-driven charge transfer in transition metal perovskites, or a computational look at LaFeO3, LaCoO3 and LaNiO3.

Vries, Alwin de (2024) Excited State Forces in Semiconductor Crystals from the GW and Bethe-Salpeter Equation Methods.

Vries, Alwin de (2024) Excited State Forces in Semiconductor Crystals from the GW and Bethe-Salpeter Equation Methods.

Wilt, Yannick van der (2024) Conduction welding of thermoplastic composites : An experimental study towards specifying the process window for process time and temperature.

Woerd, L.G. van der (2024) Development of a Neonatal Umbilical Cannulation Simulator : Design and User Validation.

Zandee, N. (2024) Design of Amusement Rides using Fibre Reinforced Polymer Composites.

2023

Bertelink, S.H. (2023) 3D-printed monolithic oviduct-on-chip device.

Bošnjak, I. (2023) Transport properties of SnTe nanowires in Josephson junction devices.

Buskens, Nienke (2023) The Effect of Bending on the Critical Current of ReBCO Based Stack Cables : High Magnetic Fields for Muon Collider.

Chennaveeranahalli, D.R. (2023) Fabrication and analysis of glucose sensor.

Fernhout, M.M. (2023) A Deep Learning Approach for Assessing Micrographs of Fibre Reinforced Composite Laminates.

Garrido Olvera, L.P. (2023) NiOx and K-doped NiOx for p-i-n Perovskite Solar Cells.

Grefte, M.M.A. and Winter, J.S. and Zon, M. van (2023) Fixatie van de voet tijdens epifysiodese: Een (3D-geprinte) oplossing voor vermindering van stralingsbelasting.

Haverkort, Arthur (2023) The influence of hybrid reinforcements on Long Fiber Thermoplastic composites. An experimental approach on the production process of (hybrid) LFT pellets and static/dynamic mechanical testing.

Heemstra, Berwout (2023) Controlled deposition of gold nanoparticles on faceted SrTiO3 photocatalyst particles.

Heer, Inge de (2023) The influence of viscoelastic properties and surface roughnesses in an alginate-based hydrogel on the behaviour of hiPSC-CMs.

Hernandez Garcia, M. (2023) Material selection process for flexible substrates in medical wearable device applications.

Jager, K.E. de (2023) Development of a microfluidic device for point-of-care testing of free thiol levels in plasma : A lab-on-a-chip for biomarker detection of oxidative stress in IBD patients.

Kappert, S. (2023) Development of a Silicone 3D Printing Process Enabling Embedded Sensors for Soft Robotic Applications.

Lochem, S.H. van (2023) Developing a realistic venous model for in-vitro application of the eduECMO trainer.

Morra, B.C.J. (2023) Design of a rapid characterization method to predict the sealing behaviour of LLDPE packaging films.

Nasseri, Elham (2023) Development of Bio-inspired Hydrogels with Tunable Viscoelastic Properties for 3D Cell Culture.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Rezelman, SA (2023) Compounding and characterization of tire tread compounds using funtionalized rubber.

Rivera, Alba (2023) Development of magnetic alginate beads for localized mechanical stimulation in tissue engineering.

Rolfes, Stan (2023) Item availability restricted.

Scheffer, Lars (2023) Hoffas’s Fat Pad-on-Chip : Optimization and Characterization of Dextran- Hyaluronic Acid - Gelatin Hydrogels to Mimic the HFP Extracellular Matrix.

Schouw, C.Q.G. (2023) Replacement of Carbon Black by Renewable Fillers in Natural Rubber.

Sojati, Rilda (2023) Solvent Annealing as a post-treatment: towards single crystalline epitaxial MAPbI₃.

Strik, D.H. (2023) Influence of print speed on the microstructure and mechanical properties of AA6060 FSEAM builds.

Szybisty, Zuzanna (2023) Modelling and material characterization of Er-doped waveguide amplifiers in polycrystalline Al2O3.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Westerbeek, J.J. (2023) Item availability restricted.

Yang, J. (2023) Item availability restricted.

2022

Barkman, A.H. (2022) Investigating electrical properties of ADAM 3D printed 17-4PH stainless steel for integrated sensing functionalities.

Bonnema, M.J.S. (2022) Inline Micro-fluidic Relative Permittivity Sensor Based on Silicon Wafer Technology.

Bosman, D.G.J. (2022) Design of a leaf holder for real-time microscopy in the context of precision farming.

Dan, C. (2022) Electrospinning and characterization of ZrO2 nanofibers functionalized with palladium sites.

Doets, M. (2022) Mechanically activated in-vitro muscle model.

Domselaar, M. van (2022) Providing guidance on the road towards 100 circularity in 2050 : developing a method to aid in determining the circularity progress of packaging types.

Hesseling, I. (2022) From single-use to reuse : development of a decision support tool for FMCG packaging.

Hoeven, Rick van der (2022) Modelling and simulation of thermoelectric materials with a superionic phase transition using on-the-fly machine learning force fields.

Hoeven, Rick van der (2022) Modelling and simulation of thermoelectric materials with a superionic phase transition using on-the-fly machine learning force fields.

Hu, Dennis (2022) Self Healing MOSFETs: Investigation into the Time Dependency of Recovery in the High-κ dielectric HfO2.

Jacke, Marc Alexander (2022) Due Diligence of Copper at Siemens Energy.

Kareem, J. (2022) Hall effect and field-effect measurements of tin telluride nanowire devices for novel topological quantum computation.

Kuipers, T.P.W. (2022) Superionic Conduction simulated by Neural Network Potentials trained on On-The-Fly Force Fields.

Kumar, Vijayakumar Akshay (2022) Fabrication of solid polymer layer of poly-methyl methacrylate mixed with Lumogen F Red 305 for the use in Free Space Luminescent Solar Concentrators.

Loenhout, F.H.C. van (2022) Designing zero-mode waveguides for fluorescence experiments on α-synuclein and DNA.

Meijerink, Stijn and Mol, Seb and Steentjes, Jelle (2022) Towards a personalised endovascular treatment for abdominal aortic aneurysm.

Pater, S. (2022) Development of hollow fiber membranes prepared with the green solvent Agnique® AMD 3L for haemodialysis.

Riet, D.S. den (2022) Improving the sustainability of waste streams at the Heart Center of Isala Hospital in Zwolle.

Steenge, Céline (2022) Establishing a thermal atomic layer deposition process for AlGaN.

Stronkman, Eva (2022) Item availability restricted.

Szewczyk, J. (2022) Item availability restricted.

Vente, Gerko de (2022) Clinical Feasibility of a Shape-Memory Polymer aimed at Targeted Drug Delivery.

2021

Adi, A.B. (2021) Development of 3D-printed angle sensor for feedback in soft robotic applications.

Bogt, J.H.W. ter (2021) The influence of consolidation on bending behaviour of molten unidirectional fiber reinforced thermoplastic tapes.

Dijk, M. van (2021) Substitution of polymer interior packaging with the use of biodegradable materials.

Dulfer, Simone (2021) Item availability restricted.

Duursma, I. (2021) A novel strategy for the treatment of osteoarthritis by restoring joint homeostasis using natural antagonists.

Eijpe, S.W (2021) Fabrication of microfluidic devices using ultrasonic welding: alignment, bonding & quality inspection.

Ghantasala, Udaya (2021) Rain erosion performance of the material to be used as the leading edge protection of the wind turbine blades.

Gladović, Nikola (2021) Packaging and waveguiding methodologies for in-package optocoupling.

Hagen, L. P. (2021) Creating a multiplexed Gut-on-Chip with individually addressable chambers.

Holm, L. (2021) Exploratory Research Into Accurate And Consistent Resistivity Measurements Of Highly-doped Silicon At High Temperatures.

Hoorne, L. A. van (2021) Cytodex-3 microcarrier particle suspensions as bioactive embedding baths for 3D biorpinting.

Horsman, B.F. (2021) A first principles study on the ferroelectric properties of the phases of hafnia.

Keizer, A.A. (2021) The Effect of Thermal Annealing on Stress-Induced Leakage Current in Gate Oxides.

Laerhoven, B.J.A. van (2021) Implementation of silicon nitride isolation trenches in SOI MEMS accelerometers.

Okken, Boi (2021) Design and Development of a Magnetic Non-linear Elastic Element and Control for Progressive Series Actuation.

Peperkamp, M.W. (2021) Design and optimization of the pultrusion process toproduce reliable and recyclable wind turbine blades.

Rous, E. (2021) Shopfloor Organization and management system : developing a software system for a matrix-production system.

Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.

Snoeijink, L.H. (2021) Room temperature characterization of DopantNetwork Processing Units. And optimization of the measuring process.

Tjepkema, W.W.A. (2021) Design of a surgical manipulator using smart materials.

Zijl, Roy van (2021) Rate-Dependent Properties and Failure Behaviour of Glass Fiber Reinforced Isotactic Polypropylene Composite Laminates under Impact Conditions.

2020

Arends, Jim (2020) The feasibility of transforming the Dutch main- and regional natural gas pipeline infrastructure into a hydrogen network.

Blees, Ricardo (2020) Incineration or pyrolysis for processing un-separated household waste? : An exploration of pyrolysis for non-recyclable but flammable household waste within a case study.

Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.

Loobergen, K. van (2020) Identification of damage precursors in 3D-printed aluminium alloy after fatigue testing.

Marquez Ortiz, Aislinn (2020) Improving the mechanical properties of woody thermoplastic by reinforcing with short fibers (Pine Wood).

Moormans, L.R. (2020) Standardization of offloading devices for the treatment of diabetic foot ulcers by 3D printing.

Olthuis, M. (2020) Relevance and development of new rubber technology competences for a sustainable automotive industry.

Rang, M.S. (2020) Computational methods in quantum mechanics with applications in spintronic calculations.

Robson, Francis (2020) Using Temperature and Humidity Sensors to Propose a New Form of Flat Roof Leakage Detection.

Roodink, Sander (2020) Controlling deformations of a 3D-printed vibrating beam using stiffness modulation.

Roskamp, T.J. (2020) Investigation of Second Generation Superconductor Tapes to be used for Superconducting Electronics.

Veldscholte, ir. Lars (2020) Coarse-grained Molecular Dynamics Simulations to Study Vapour Solvation in Polymer Brushes: On the border between polymer physics and computational science.

Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.

Wijngaarden, Bas (2020) The consequences of inaccuracy of the Cox-Strack method for contact resistivity determination in contemporary research.

2019

Boven, E.J. van (2019) Localization of structural flaws in concrete sewer pipes by physical interaction inspection with a robotic arm.

Braakman, H.G.D. (2019) Magnetic field sensing on 3D-printed structures.

Davenschot, Jan Henk (2019) Investigating local Scanning Tunneling Spectroscopy workfunction measurements as an alternative to Ultraviolet Photoelectron Spectroscopy workfunction measurements.

Hartog, Tessa G. den (2019) A supramolecular hydrogel system for 3D embedded bioprinting.

Kleinhoven, F.T.H. (2019) Optimizing Low Dimensional Carbon-Based Nanomaterials For Seawater Desalination: Investigating the Viability of Graphene-Oxide TiO2-modified Activated Carbon Composite Electrodes for Water Demineralization.

Kooijman, Lucas Johannes (2019) Low voltage high performance silicon nitride EOF pump.

Marrero Feitosa-Afonsso, D. (2019) Development of a blood-retina barrier on-a-chip with human iPSC-derived retinal pigment epithelium and endothelium.

Nauta, L. (2019) Bioprintability of Dex-TA/HA-TA hydrogels with human iPS cells for cartilage tissue engineering.

Pleijsier, A.A. (2019) Acoustic condition assessment of concrete sewer pipes using a particle velocity sensor.

Shea, Gary (2019) Item availability restricted.

Vermeer, M. (2019) Interface trap density extraction from the subthreshold slope of FDSOI devices.

Vliet, Mick van (2019) Topological Insulators: Tight-Binding Models and Surface States.

Vliet, Mick van (2019) Topological Insulators: Tight-Binding Models and Surface States.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.

2018

Bosboom, Vincent (2018) Calculating scattering matrices by wave function matching on Co-Cu interfaces.

Bruijn, D.S. de (2018) Electrowetting-controlled diode-like behavior of suspended graphene membranes.

Chidambaram, N (2018) Ultrasonic non-collinear wave mixing for the detection of ageing in PVC pipes.

Doller, Daniel (2018) Item availability restricted.

Eidhof, Martijn (2018) Concentration Polarization to Measure the Nanopore Accessibility of Fluid Catalytic Cracking Particles.

Elburg, A.N. van and Groenendijk, E.A. and Storck, K.C.G. and Zijp, T. van (2018) Advies over de materiaaleigenschappen van een geprinte orthese bij de alternatieve behandeling van stabiele, niet-verplaatste colles-fracturen.

Gurian, Melvin (2018) Item availability restricted.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Heidemann, Claudia (2018) Characterisation of a nano-g accelerometer.

Hoedemakers, Juliette (2018) Effective visualisation of textile for a Digital Showroom.

Klein Essink, Jeroen (2018) Electrical conductivity effects in ultra-thin Tungsten films.

Kooij, D. (2018) Radio frequency impedance matching for SAW devices on zinc oxide and lithium niobate.

Nass, M. (2018) Finding intelligence in disordered boron dopant atoms.

Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.

Vissers, E.J.P. (2018) Optical nonlinearity in titanium dioxide waveguides.

2017

Aarnink, K.M. (2017) Electro-mechanical resynchronisation therapy with a smart material in patients with heart failure: an experimental study.

Baveco, M.A. (2017) Analysis and design of a (super) low 1/f-noise LC oscillator.

Cloet, J.M. de (2017) Extracting the reaction kinetics of the formation of CIGS from in-situ X-ray diffraction measurements.

Geervliet, E.K. and Paalvast, A.S. and Rheenen, BSc S.K. van and Schreijer, M.A. (2017) The use of a shape memory material in the treatment of heart failure with a reduced ejection fraction.

Hoeksema, V.L. (2017) 3D Transient and crystallization model for laser assisted tape Winding.

Pekkeriet, D.B. (2017) Improvement of grip and durability of uneven bars.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Welleweerd, M.K. (2017) 3D Printing a three degrees of freedom force sensor.

Yusnitha, Erilia (2017) Fabrication and characterization of patterned titania layers.

Zhu, Shaochen (2017) OXYGEN TRANSPORT KINETICS OF SURFACE Pt &Ag-MODIFIED PEROVSKITE OXIDE La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF).

2016

Ensink, E.S. (2016) De overstap van Excel naar Exact.

Karavidas, A. (2016) Light Emission Measurements on Diodes.

Mulder, Martijn (2016) Synthesis of LiNi0.5Mn1.5O4 nanofibers by electrospinning.

Ramaker, K.A. (2016) Plasticity and fracture modeling of composite steel Tribond 1200 for crash simulation.

Thirukokaranam Chandrasekar, Krishna Kumar (2016) Tracking and Control of Soft, Self-Folding Miniaturized Agent using Ultrasound Images.

Velde, F.J. van der (2016) Electrical measurement method and test structures for determining continuity of ultra-thin conducting or insulating films.

Vluttert, N. (2016) The absorption of moisture by metal powder in a humid environment and the effects on its composition.

Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.

Wit, Erik de (2016) Charge carrier transport through silicon nitride membranes and fabrication of solid-state nanopores.

2015

Berg, T. van den and Hack, M. (2015) Structure and functionality correlation in resistive random access memory devices.

Birkhölzer, Y.A. (2015) Nanomechanical sensing of hypermethylated DNA for the detection of bladder cancer.

Braakman, Robin (2015) Self-healing of composite material with an intermediate supramolecular layer.

Dekker, J.J.J.W. (2015) Prototype for non-collinear wave mixing : software implementation.

Loon, J. van and Luinstra, J.M. and Schrader, I.M.W. and Velden, F.M.A. van der (2015) Smart materials ter ondersteuning van een falend hart.

Meijer, E.M. (2015) On-line monitoring of microreactor products using an optofluidic microchip.

Meurs, J. van (2015) The effects of overlap area and surface roughness on metal-composite friction spot weld joints.

Sloot, R.N.F. (2015) Analysis of a reinforcing steel supply chain in a large construction project.

Vasileios, Papadimitriou (2015) Templated Activated Carbon for Electric Double Layer Capacitors.

2014

Janson, T.G. (2014) Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling.

Mustafa, Hasib (2014) Optimizing the detection limit of micro ring resonators.

Rooijen, MSc M.J. van (2014) Characterization of capacitive deionization concentration profiles for small volume sample preparation.

2013

Koeijer, B.L.A. de (2013) Cradle to Cradle Packaging Development: Method | Case Study.

Nawrath, Chris (2013) Possible enhancement of thermoelectric p-type oxides by creating superlattice structures with pulsed laser deposition.

Scholten, Chiel (2013) Analyzing BaTiO3 for ferroelectric tuning of the LaAlO3/SrTiO3 interface.

Scholten, Thijs (2013) Superconductor-Bi1:5Sb0:5Te1:7Se1:3 Topological Insulator Hybrid Devices.

Schot, Thomas (2013) Characterisation of hamstring- and anterior cruciate ligament cells.

2012

Flanderijn, Stefan (2012) Mechanochemical devulcanization of butadiene rubber with DPDS as a devulcanization aid.

Schreiber, Marc (2012) SoundProjects : SP215MB.

Strijker, Vincent (2012) Decreasing cool-down time of a Joule-Thomson microcooler by introducing multiple closable restriction channels.

Witteveen, G. (2012) Sketchlab : een platform en visie voor het moderniseren van het digitaal schetsonderwijs.

Zschocke, Daniel (2012) Ferroelectric properties around he MPB of PbZr1-xTixO3 thin films.

2011

Claassen, R.E.M. (2011) Het ontwerpen van de Cito 1+1.

Merwe, Tjark van de (2011) Measuring the ecological and economic impact of transformable building.

Pas, M.B. (2011) Verbetering kwaliteitszorg Huima : Het effectiever toepassen van de ISO methode.

Remmerswaal, Guus (2011) Ontwerp voor een nieuw hulpmiddel voor orderpicking, op basis van een procesanalyse van bestaande hulpmiddelen.

Velde, E.A.G. ten (2011) Het ontwerpen van een AED kast.

2010

Beer, Manon de (2010) Het verhogen van de exploitatie van buitensportaccommodaties.

Bergsma, Job (2010) Design of a bicycle storage facility in Rio de Janeiro.

Bussink, Majorie (2010) “Ontwerp van een GUI voor robotgestuurde endoscopische onderzoeken “.

Couturier, Isabelle (2010) Ontwerpen waar je bij staat : DualDesign - vormgeving en gebruiksscenario's.

Dijk, Leon Martijn van (2010) Define the options for minimizing (optimizing) the overall size of a vacuum cleaner.

Hout, D.F.M. van (2010) TO Innovatie: een vlag - innovatie Een ontwerpstudie naar een standalone verlichte vlaggenmast.

Leicher, A.A.M. (2010) De effecten van systems engineering in de woningbouw : een evaluatieonderzoek naar de toepassing van systems engineering bij woningcorporatie Beter Wonen.

Meijer, Ellen (2010) Verbetering van de milieuvriendelijkheid van de Axia bureaustoel.

Verheijen, Maarten J.F. (2010) Het begint met ambitie : de ontwikkeling van een selectiemethodiek voor duurzaamheidscriteria in een EMVI aanbesteding binnen de GWW sector.

Voorde, Pien ten (2010) Ontwikkeling van een textiel plaatmateriaal.

2009

Bogt, O.P. ter (2009) Het ontwerpen van drie gerelateerde producten powertube | burton krik | elektrische burton.

Germs, Marleen (2009) Item availability restricted.

Kettler, Sebastian (2009) Ontwerpondersteuning in het Kader van het Solar Chandelier Project.

Klazinga, Renee (2009) Bioplastics, a sustainable solution?

Koenderink, Mark Jan Willem (2009) De tredelift.