University of Twente Student Theses

Essay

Aarnink, K.M. (2017) Electro-mechanical resynchronisation therapy with a smart material in patients with heart failure: an experimental study.

Adi, A.B. (2021) Development of 3D-printed angle sensor for feedback in soft robotic applications.

Akkermans, Ilse (2024) The Design of a Modular and Future-Proof Last-Mile Delivery Hub with Light Electric Vehicles : a 2024-2050 use case with Fulpra.

Aldenkamp, M.A. (2024) Soft Robotics Joystick using 3-D Printed Piezoresistive Sensors with Digital Avatar Interface.

Arends, Jim (2020) The feasibility of transforming the Dutch main- and regional natural gas pipeline infrastructure into a hydrogen network.

Barkman, A.H. (2022) Investigating electrical properties of ADAM 3D printed 17-4PH stainless steel for integrated sensing functionalities.

Baveco, M.A. (2017) Analysis and design of a (super) low 1/f-noise LC oscillator.

Beer, Manon de (2010) Het verhogen van de exploitatie van buitensportaccommodaties.

Berg, T. van den and Hack, M. (2015) Structure and functionality correlation in resistive random access memory devices.

Bertelink, S.H. (2023) 3D-printed monolithic oviduct-on-chip device.

Birkhölzer, Y.A. (2015) Nanomechanical sensing of hypermethylated DNA for the detection of bladder cancer.

Blees, Ricardo (2020) Incineration or pyrolysis for processing un-separated household waste? : An exploration of pyrolysis for non-recyclable but flammable household waste within a case study.

Bogt, J.H.W. ter (2021) The influence of consolidation on bending behaviour of molten unidirectional fiber reinforced thermoplastic tapes.

Bogt, O.P. ter (2009) Het ontwerpen van drie gerelateerde producten powertube | burton krik | elektrische burton.

Bonnema, M.J.S. (2022) Inline Micro-fluidic Relative Permittivity Sensor Based on Silicon Wafer Technology.

Boom, B. van der (2024) Enhanced Predictability of Recycled Thermoplastic Composites : A study towards a better understanding of the recycling process.

Bosboom, Vincent (2018) Calculating scattering matrices by wave function matching on Co-Cu interfaces.

Bosman, D.G.J. (2022) Design of a leaf holder for real-time microscopy in the context of precision farming.

Boven, E.J. van (2019) Localization of structural flaws in concrete sewer pipes by physical interaction inspection with a robotic arm.

Bošnjak, I. (2023) Transport properties of SnTe nanowires in Josephson junction devices.

Braakman, H.G.D. (2019) Magnetic field sensing on 3D-printed structures.

Braakman, Robin (2015) Self-healing of composite material with an intermediate supramolecular layer.

Bruijn, D.S. de (2018) Electrowetting-controlled diode-like behavior of suspended graphene membranes.

Bui, Thai Ha (2024) A minimal nanoneuron capable of nonlinear classification.

Buskens, Nienke (2023) The Effect of Bending on the Critical Current of ReBCO Based Stack Cables : High Magnetic Fields for Muon Collider.

Bussink, Majorie (2010) “Ontwerp van een GUI voor robotgestuurde endoscopische onderzoeken “.

Chennaveeranahalli, D.R. (2023) Fabrication and analysis of glucose sensor.

Chidambaram, N (2018) Ultrasonic non-collinear wave mixing for the detection of ageing in PVC pipes.

Claassen, R.E.M. (2011) Het ontwerpen van de Cito 1+1.

Cloet, J.M. de (2017) Extracting the reaction kinetics of the formation of CIGS from in-situ X-ray diffraction measurements.

Couturier, Isabelle (2010) Ontwerpen waar je bij staat : DualDesign - vormgeving en gebruiksscenario's.

Dalenoord, F. (2024) Item availability restricted.

Dan, C. (2022) Electrospinning and characterization of ZrO2 nanofibers functionalized with palladium sites.

Davenschot, Jan Henk (2019) Investigating local Scanning Tunneling Spectroscopy workfunction measurements as an alternative to Ultraviolet Photoelectron Spectroscopy workfunction measurements.

Dekker, J.J.J.W. (2015) Prototype for non-collinear wave mixing : software implementation.

Delfos, L. (2024) Wearable interfaces in voice performance.

Dijk, Leon Martijn van (2010) Define the options for minimizing (optimizing) the overall size of a vacuum cleaner.

Dijk, M. van (2021) Substitution of polymer interior packaging with the use of biodegradable materials.

Doets, M. (2022) Mechanically activated in-vitro muscle model.

Doller, Daniel (2018) Item availability restricted.

Domselaar, M. van (2022) Providing guidance on the road towards 100 circularity in 2050 : developing a method to aid in determining the circularity progress of packaging types.

Dulfer, Simone (2021) Item availability restricted.

Dulfer, Simone (2024) Towards the realisation of self-aligned nanometre scale tunnel field effect transistors.

Duursma, I. (2021) A novel strategy for the treatment of osteoarthritis by restoring joint homeostasis using natural antagonists.

Eidhof, Martijn (2018) Concentration Polarization to Measure the Nanopore Accessibility of Fluid Catalytic Cracking Particles.

Eijpe, S.W (2021) Fabrication of microfluidic devices using ultrasonic welding: alignment, bonding & quality inspection.

Elburg, A.N. van and Groenendijk, E.A. and Storck, K.C.G. and Zijp, T. van (2018) Advies over de materiaaleigenschappen van een geprinte orthese bij de alternatieve behandeling van stabiele, niet-verplaatste colles-fracturen.

Emous, J.J.J. van (2024) A feasibility study on poly-lactic acid and polyhydroxy-alkanoates application within the packaging portfolio of FrieslandCampina.

Engelen, F.H.A. (2024) Material preparation, design and production of an actuated 3D printed magnetic part.

Ensink, E.S. (2016) De overstap van Excel naar Exact.

Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.

Fernhout, M.M. (2023) A Deep Learning Approach for Assessing Micrographs of Fibre Reinforced Composite Laminates.

Flanderijn, Stefan (2012) Mechanochemical devulcanization of butadiene rubber with DPDS as a devulcanization aid.

Garrido Olvera, L.P. (2023) NiOx and K-doped NiOx for p-i-n Perovskite Solar Cells.

Geervliet, E.K. and Paalvast, A.S. and Rheenen, BSc S.K. van and Schreijer, M.A. (2017) The use of a shape memory material in the treatment of heart failure with a reduced ejection fraction.

Germs, Marleen (2009) Item availability restricted.

Ghantasala, Udaya (2021) Rain erosion performance of the material to be used as the leading edge protection of the wind turbine blades.

Gladović, Nikola (2021) Packaging and waveguiding methodologies for in-package optocoupling.

Grefte, M.M.A. and Winter, J.S. and Zon, M. van (2023) Fixatie van de voet tijdens epifysiodese: Een (3D-geprinte) oplossing voor vermindering van stralingsbelasting.

Gurian, Melvin (2018) Item availability restricted.

Haalstra, E.C.T. (2024) Development of a solution to enable insightful decision-making in product development processes : a case study at Vepa.

Hagen, L. P. (2021) Creating a multiplexed Gut-on-Chip with individually addressable chambers.

Harbers, Job (2024) Characterization and modeling of a thermal conductivity sensor for liquids.

Hartog, Tessa G. den (2019) A supramolecular hydrogel system for 3D embedded bioprinting.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Haverkort, Arthur (2023) The influence of hybrid reinforcements on Long Fiber Thermoplastic composites. An experimental approach on the production process of (hybrid) LFT pellets and static/dynamic mechanical testing.

Heemstra, Berwout (2023) Controlled deposition of gold nanoparticles on faceted SrTiO3 photocatalyst particles.

Heer, Inge de (2023) The influence of viscoelastic properties and surface roughnesses in an alginate-based hydrogel on the behaviour of hiPSC-CMs.

Heidemann, Claudia (2018) Characterisation of a nano-g accelerometer.

Hernandez Garcia, M. (2023) Material selection process for flexible substrates in medical wearable device applications.

Hesseling, I. (2022) From single-use to reuse : development of a decision support tool for FMCG packaging.

Hoedemakers, Juliette (2018) Effective visualisation of textile for a Digital Showroom.

Hoeksema, V.L. (2017) 3D Transient and crystallization model for laser assisted tape Winding.

Hoeven, Rick van der (2022) Modelling and simulation of thermoelectric materials with a superionic phase transition using on-the-fly machine learning force fields.

Hoeven, Rick van der (2022) Modelling and simulation of thermoelectric materials with a superionic phase transition using on-the-fly machine learning force fields.

Holm, L. (2021) Exploratory Research Into Accurate And Consistent Resistivity Measurements Of Highly-doped Silicon At High Temperatures.

Holstege, Nadia (2024) Design and optimization of a devulcanization process for butyl rubber.

Hoorne, L. A. van (2021) Cytodex-3 microcarrier particle suspensions as bioactive embedding baths for 3D biorpinting.

Horsman, B.F. (2021) A first principles study on the ferroelectric properties of the phases of hafnia.

Hout, D.F.M. van (2010) TO Innovatie: een vlag - innovatie Een ontwerpstudie naar een standalone verlichte vlaggenmast.

Hu, Dennis (2022) Self Healing MOSFETs: Investigation into the Time Dependency of Recovery in the High-κ dielectric HfO2.

Jacke, Marc Alexander (2022) Due Diligence of Copper at Siemens Energy.

Jager, K.E. de (2023) Development of a microfluidic device for point-of-care testing of free thiol levels in plasma : A lab-on-a-chip for biomarker detection of oxidative stress in IBD patients.

Janson, T.G. (2014) Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling.

Kampstra, L. (2024) The occurrence of viscous shear heating within the cold rolling process.

Kappert, S. (2023) Development of a Silicone 3D Printing Process Enabling Embedded Sensors for Soft Robotic Applications.

Karavidas, A. (2016) Light Emission Measurements on Diodes.

Kareem, J. (2022) Hall effect and field-effect measurements of tin telluride nanowire devices for novel topological quantum computation.

Kareem, Jonas (2024) Fabrication and electrical characterisation of hexagonal GeSi nanowire devices.

Keizer, A.A. (2021) The Effect of Thermal Annealing on Stress-Induced Leakage Current in Gate Oxides.

Keshetti, Akhil Raja (2024) A Methodology for Evaluating Decision Support Systems in the realm of Steel Ladle Logistics.

Kettler, Sebastian (2009) Ontwerpondersteuning in het Kader van het Solar Chandelier Project.

Klazinga, Renee (2009) Bioplastics, a sustainable solution?

Klein Essink, Jeroen (2018) Electrical conductivity effects in ultra-thin Tungsten films.

Kleinhoven, F.T.H. (2019) Optimizing Low Dimensional Carbon-Based Nanomaterials For Seawater Desalination: Investigating the Viability of Graphene-Oxide TiO2-modified Activated Carbon Composite Electrodes for Water Demineralization.

Koeijer, B.L.A. de (2013) Cradle to Cradle Packaging Development: Method | Case Study.

Koenderink, Mark Jan Willem (2009) De tredelift.

Kooij, D. (2018) Radio frequency impedance matching for SAW devices on zinc oxide and lithium niobate.

Kooijman, Lucas Johannes (2019) Low voltage high performance silicon nitride EOF pump.

Kossen, Jamie (2024) VHH surface modification to lipid nanoparticles for targeted osteoarthritic synovitis therapy.

Kroese, Niels J.J. (2024) A novel 3D-bioprinting platform for the formation of dense tissue fibres from dilute Newtonian bioinks deposited into thixotropic Xanthan Gum Embedding Baths.

Kuipers, T.P.W. (2022) Superionic Conduction simulated by Neural Network Potentials trained on On-The-Fly Force Fields.

Kumar, Vijayakumar Akshay (2022) Fabrication of solid polymer layer of poly-methyl methacrylate mixed with Lumogen F Red 305 for the use in Free Space Luminescent Solar Concentrators.

Laerhoven, B.J.A. van (2021) Implementation of silicon nitride isolation trenches in SOI MEMS accelerometers.

Lamers, M.E.G. (2024) Process defects and resulting structure of unidirectional CF/LM-PAEK after induction welding.

Leicher, A.A.M. (2010) De effecten van systems engineering in de woningbouw : een evaluatieonderzoek naar de toepassing van systems engineering bij woningcorporatie Beter Wonen.

Lochem, S.H. van (2023) Developing a realistic venous model for in-vitro application of the eduECMO trainer.

Loenhout, F.H.C. van (2022) Designing zero-mode waveguides for fluorescence experiments on α-synuclein and DNA.

Loobergen, K. van (2020) Identification of damage precursors in 3D-printed aluminium alloy after fatigue testing.

Loon, J. van and Luinstra, J.M. and Schrader, I.M.W. and Velden, F.M.A. van der (2015) Smart materials ter ondersteuning van een falend hart.

Marina, Gomez Fernandez (2024) Exploratory Research on Crochet : Assessing its Potential as a Fabrication Technique for Soft Robotic Systems and Biomedical Devices.

Marquez Ortiz, Aislinn (2020) Improving the mechanical properties of woody thermoplastic by reinforcing with short fibers (Pine Wood).

Marrero Feitosa-Afonsso, D. (2019) Development of a blood-retina barrier on-a-chip with human iPSC-derived retinal pigment epithelium and endothelium.

Meijer, E.M. (2015) On-line monitoring of microreactor products using an optofluidic microchip.

Meijer, Ellen (2010) Verbetering van de milieuvriendelijkheid van de Axia bureaustoel.

Meijerink, Stijn and Mol, Seb and Steentjes, Jelle (2022) Towards a personalised endovascular treatment for abdominal aortic aneurysm.

Merwe, Tjark van de (2011) Measuring the ecological and economic impact of transformable building.

Meuleman, Jelmer D. (2024) Exploring Nonlinear Dynamics : in Al₂O₃ Integrated Photonic Devices.

Meurs, J. van (2015) The effects of overlap area and surface roughness on metal-composite friction spot weld joints.

Mijle Meijer, Joep K. van der (2024) Advancing Control Methods for Biohybrid Microrobots : A Focus on Vertical Rolling Locomotion.

Monchen, Niek (2024) The production and characterisation of magnetic particles produced with in-air microfluidics.

Moormans, L.R. (2020) Standardization of offloading devices for the treatment of diabetic foot ulcers by 3D printing.

Morra, B.C.J. (2023) Design of a rapid characterization method to predict the sealing behaviour of LLDPE packaging films.

Mulder, Martijn (2016) Synthesis of LiNi0.5Mn1.5O4 nanofibers by electrospinning.

Mustafa, Hasib (2014) Optimizing the detection limit of micro ring resonators.

Nass, M. (2018) Finding intelligence in disordered boron dopant atoms.

Nasseri, Elham (2023) Development of Bio-inspired Hydrogels with Tunable Viscoelastic Properties for 3D Cell Culture.

Nauta, L. (2019) Bioprintability of Dex-TA/HA-TA hydrogels with human iPS cells for cartilage tissue engineering.

Nawrath, Chris (2013) Possible enhancement of thermoelectric p-type oxides by creating superlattice structures with pulsed laser deposition.

Nijland, Chiel (2024) Analysing the Effect of High-level Irradiation on Contact Resistance in Solar Cells.

Okken, Boi (2021) Design and Development of a Magnetic Non-linear Elastic Element and Control for Progressive Series Actuation.

Olde Dubbelink, M.B. (2024) High Strain Rate Characterization of Mechancal Properties by Low Temperature Testing for Polymeric Materials.

Olthuis, M. (2020) Relevance and development of new rubber technology competences for a sustainable automotive industry.

Ottachchige, P.P. (2024) Interaction control with a 3D printed torque sensor in an impedance control framework.

Pamungkas, Mr. H.E.A.N. (2024) On the Relation Between Microstructure and Transverse Electrical Resistivity of Unidirectional Composites: An Evaluation Statistical Spatial Descriptors and a Quasi- 3D Resistor Network Model.

Pas, M.B. (2011) Verbetering kwaliteitszorg Huima : Het effectiever toepassen van de ISO methode.

Pater, S. (2022) Development of hollow fiber membranes prepared with the green solvent Agnique® AMD 3L for haemodialysis.

Pekkeriet, D.B. (2017) Improvement of grip and durability of uneven bars.

Peperkamp, M.W. (2021) Design and optimization of the pultrusion process toproduce reliable and recyclable wind turbine blades.

Pleijsier, A.A. (2019) Acoustic condition assessment of concrete sewer pipes using a particle velocity sensor.

Ramaker, K.A. (2016) Plasticity and fracture modeling of composite steel Tribond 1200 for crash simulation.

Rang, M.S. (2020) Computational methods in quantum mechanics with applications in spintronic calculations.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Remmerswaal, Guus (2011) Ontwerp voor een nieuw hulpmiddel voor orderpicking, op basis van een procesanalyse van bestaande hulpmiddelen.

Reuling, Niek (2024) A pure sliding experiment to examine wear on possible coatings for greaseless open gears.

Rezelman, SA (2023) Compounding and characterization of tire tread compounds using funtionalized rubber.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Riet, D.S. den (2022) Improving the sustainability of waste streams at the Heart Center of Isala Hospital in Zwolle.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Rivera, Alba (2023) Development of magnetic alginate beads for localized mechanical stimulation in tissue engineering.

Robson, Francis (2020) Using Temperature and Humidity Sensors to Propose a New Form of Flat Roof Leakage Detection.

Rolfes, Stan (2023) Item availability restricted.

Roodink, Sander (2020) Controlling deformations of a 3D-printed vibrating beam using stiffness modulation.

Rooijen, MSc M.J. van (2014) Characterization of capacitive deionization concentration profiles for small volume sample preparation.

Roskamp, T.J. (2020) Investigation of Second Generation Superconductor Tapes to be used for Superconducting Electronics.

Rous, E. (2021) Shopfloor Organization and management system : developing a software system for a matrix-production system.

Saleh, E. (2024) Characterization of Electric Double-Layer Capacitors Using Electrochemical Impedance Spectroscopy.

Schalk, D. (2024) Machine design for Ex-Core industrialization.

Scheffer, Lars (2023) Hoffas’s Fat Pad-on-Chip : Optimization and Characterization of Dextran- Hyaluronic Acid - Gelatin Hydrogels to Mimic the HFP Extracellular Matrix.

Schildkamp, Rick H. (2024) 3D Printing of Shape Memory Alloy NiTi with Laser Metal Deposition.

Schmale, M.D. (2024) Ceramic Surfaces as a Source of Luxury in Handheld Devices: A Study on the Physical Attributes that Predict Luxury and how to apply these in technical ceramics manufacturing.

Scholten, Chiel (2013) Analyzing BaTiO3 for ferroelectric tuning of the LaAlO3/SrTiO3 interface.

Scholten, Thijs (2013) Superconductor-Bi1:5Sb0:5Te1:7Se1:3 Topological Insulator Hybrid Devices.

Schot, Thomas (2013) Characterisation of hamstring- and anterior cruciate ligament cells.

Schouw, C.Q.G. (2023) Replacement of Carbon Black by Renewable Fillers in Natural Rubber.

Shea, Gary (2019) Item availability restricted.

Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.

Sloot, R.N.F. (2015) Analysis of a reinforcing steel supply chain in a large construction project.

Smink - de Jong, E. (2024) Development of improved Mixed Matrix Membranes for haemodialysis in outside-in filtration mode : Towards improved dialysis treatment for patients with chronic kidney disease.

Snoeijink, L.H. (2021) Room temperature characterization of DopantNetwork Processing Units. And optimization of the measuring process.

Sojati, Rilda (2023) Solvent Annealing as a post-treatment: towards single crystalline epitaxial MAPbI₃.

Steenge, Céline (2022) Establishing a thermal atomic layer deposition process for AlGaN.

Strijker, Vincent (2012) Decreasing cool-down time of a Joule-Thomson microcooler by introducing multiple closable restriction channels.

Strik, D.H. (2023) Influence of print speed on the microstructure and mechanical properties of AA6060 FSEAM builds.

Stronkman, Eva (2022) Item availability restricted.

Szewczyk, J. (2022) Item availability restricted.

Szybisty, Zuzanna (2023) Modelling and material characterization of Er-doped waveguide amplifiers in polycrystalline Al2O3.

Thirukokaranam Chandrasekar, Krishna Kumar (2016) Tracking and Control of Soft, Self-Folding Miniaturized Agent using Ultrasound Images.

Tjepkema, W.W.A. (2021) Design of a surgical manipulator using smart materials.

Vasileios, Papadimitriou (2015) Templated Activated Carbon for Electric Double Layer Capacitors.

Velde, E.A.G. ten (2011) Het ontwerpen van een AED kast.

Velde, F.J. van der (2016) Electrical measurement method and test structures for determining continuity of ultra-thin conducting or insulating films.

Veldscholte, ir. Lars (2020) Coarse-grained Molecular Dynamics Simulations to Study Vapour Solvation in Polymer Brushes: On the border between polymer physics and computational science.

Vente, Gerko de (2022) Clinical Feasibility of a Shape-Memory Polymer aimed at Targeted Drug Delivery.

Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.

Verheijen, Maarten J.F. (2010) Het begint met ambitie : de ontwikkeling van een selectiemethodiek voor duurzaamheidscriteria in een EMVI aanbesteding binnen de GWW sector.

Vermeer, M. (2019) Interface trap density extraction from the subthreshold slope of FDSOI devices.

Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.

Vidulejs, Vits (2024) A DFT study of heterostructure-driven charge transfer in transition metal perovskites, or a computational look at LaFeO3, LaCoO3 and LaNiO3.

Vidulejs, Vits (2024) A DFT study of heterostructure-driven charge transfer in transition metal perovskites, or a computational look at LaFeO3, LaCoO3 and LaNiO3.

Vissers, E.J.P. (2018) Optical nonlinearity in titanium dioxide waveguides.

Vliet, Mick van (2019) Topological Insulators: Tight-Binding Models and Surface States.

Vliet, Mick van (2019) Topological Insulators: Tight-Binding Models and Surface States.

Vluttert, N. (2016) The absorption of moisture by metal powder in a humid environment and the effects on its composition.

Voorde, Pien ten (2010) Ontwikkeling van een textiel plaatmateriaal.

Vries, Alwin de (2024) Excited State Forces in Semiconductor Crystals from the GW and Bethe-Salpeter Equation Methods.

Vries, Alwin de (2024) Excited State Forces in Semiconductor Crystals from the GW and Bethe-Salpeter Equation Methods.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.

Welleweerd, M.K. (2017) 3D Printing a three degrees of freedom force sensor.

Westerbeek, J.J. (2023) Item availability restricted.

Wijngaarden, Bas (2020) The consequences of inaccuracy of the Cox-Strack method for contact resistivity determination in contemporary research.

Wilt, Yannick van der (2024) Conduction welding of thermoplastic composites : An experimental study towards specifying the process window for process time and temperature.

Wit, Erik de (2016) Charge carrier transport through silicon nitride membranes and fabrication of solid-state nanopores.

Witteveen, G. (2012) Sketchlab : een platform en visie voor het moderniseren van het digitaal schetsonderwijs.

Woerd, L.G. van der (2024) Development of a Neonatal Umbilical Cannulation Simulator : Design and User Validation.

Yang, J. (2023) Item availability restricted.

Yusnitha, Erilia (2017) Fabrication and characterization of patterned titania layers.

Zandee, N. (2024) Design of Amusement Rides using Fibre Reinforced Polymer Composites.

Zhu, Shaochen (2017) OXYGEN TRANSPORT KINETICS OF SURFACE Pt &Ag-MODIFIED PEROVSKITE OXIDE La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF).

Zijl, Roy van (2021) Rate-Dependent Properties and Failure Behaviour of Glass Fiber Reinforced Isotactic Polypropylene Composite Laminates under Impact Conditions.

Zschocke, Daniel (2012) Ferroelectric properties around he MPB of PbZr1-xTixO3 thin films.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.

Internship Report

Bergsma, Job (2010) Design of a bicycle storage facility in Rio de Janeiro.

Schreiber, Marc (2012) SoundProjects : SP215MB.