University of Twente Student Theses

Login

Programme: Electrical Engineering MSc (60353)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Year | Item Type
Jump to: Essay
Number of items: 461.

Essay

ALVERINGH, IR. D. (2013) A Large Range Multi-Axis Capacitive Force/Torque Sensor Realized in a Single SOI Wafer.

Abkoude, T. van (2021) Fading mitigation for optical feeder links using space time block coding.

Adi, A.B. (2021) Development of 3D-printed angle sensor for feedback in soft robotic applications.

Aliyev, Javid (2018) Cost-performance analysis of printed circuit boards using hybrid stackup.

Alizada, R. (2018) Characterization of vibrating intrinsic reverberation chamber and comparison with classical reverberation chamber for antenna efficiency measurements.

Almeida, J.P. (2019) Design an irreversible electroporation experimental apparatus: An approach to estimate and optimize the IRE dose.

An, X. (2020) Development and characterization of an HNA etching process for realization of big sensor tubes.

Appelman, M.B. (2020) Non-intrusive measurement setup for time-variant mains impedances within the 16 kHz - 256 kHz Band.

Atanasov, Anton (2019) Item availability restricted.

Avgidis, Fotios (2019) Assessing barrier properties using impedance spectroscopy in a semi-circular, blood-brain barrier on-chip.

Awan, M.U.B. (2020) Simulation and measurement-based characterization of the transmitting, receiving and scattering figures of UAV wireless station.

Baardwijk, P.F. van (2020) Item availability restricted.

Baars, C.E. (2018) Haptic feedback using skin stretch within a teleoperation system.

Baars, C.E. (2021) Multi-frequency electrical impedance myography as an alternative to electro-myography.

Bajracharya, G. (2003) Integrated Design and Implementation Tool for Multi-Agent Controllers IDITmac.

Bakker, J.H.T. (2020) Item availability restricted.

Bakker, Wouter (2019) Automatic detection of outlandish signal behaviour in the spectrum of cellular networks.

Balaji, Suraj (2021) Item availability restricted.

Barazi, M. (2021) Haptic social interaction for avatar robot system: bilateral interaction control and UX evaluation.

Barbieri, G. (2016) Control architecture for docking UAVs with a 7-DOF manipulator.

Baveco, M.A. (2017) Item availability restricted.

Beek, S. van de (2012) Characterizing Large-Form-Factor devices in a reverberation chamber.

Beekman, Niels (2004) Analysis and development of a 2D walking machine.

Been, A.J. (2013) Self-assembly of silicon particles using magnetic levitation.

Beld, W. van den (2012) Microfluidic pump based on arrays of rotating magnetic microspheres.

Benet i Bertran, Joan (2019) Computational model of action selection in Parkinson's disease and the effect of deep brain stimulation.

Berg, B. van den (2018) Stimulus related evoked potentials around the nociceptive detection threshold.

Berge, Matthijs ten (2005) Design Space Exploration for Fieldbus-based Distributed Control Systems.

Berhe, Merhawi Tecle (2012) Advanced ranging techniques in uwb based localization.

Berijanian, M. (2018) Estimation of hepatic tumors respiratory motion using learning algorithms and surrogates.

Berndsen, F.B.W. (2016) Development of a port-based modular simulation model of the Robird using an iterative approach.

Besselink, M. (2013) Item availability restricted.

Bhaswara, I.D. (2020) Exploration of autoencoder as feature extractor for face recognition system.

Bhojwani, Joshua (2021) Electrical Investigation of Single Charges in Silicon Nanostructures.

Bijlsma, T. (2006) Performance of real-time scheduling on sensor nodes : comparing scheduling algorithms, resource policies and energy conservation methods in AmbientRT.

Boeijen, R. van (2020) Sysnthesis of distribution network of large antenna array at mm-wave.

Boer, G.R. de (2002) A physical multi-body car model using 3-D (screw) bond graphs.

Boer, Harm (2008) Analysis, optimization and evaluation of a pipe inspection robot.

Boksteen, B.K. (2010) A simulation study and analysis of advanced silicon Schottky barrier field effect transistors.

Bonestroo, G. (2012) A safe-guarded multi-agent control system for Tripod.

Bonilla Fernandez, A. (2016) Controller design for Dual-Hemi CVT.

Boom, B.A. (2015) Towards a High Dynamic Range Resonant MEMS Accelerometer.

Borggreve, D. (2010) Design of a 1.2 volt reference voltage stabilizer in 180NM CMOS.

Bos, H.D. (2013) Optimizing a liquid-based energy conversion system.

Boschker, Frank B. (2008) Design of a 12bit 500Ms/s standalone charge redistribution Digital-to-Analog Converter.

Botteghi, N. (2017) Design and control of a quadruped cheetah robot with compliant spine.

Bousias, Dimitrios (2021) Towards view-invariant Gait Recognition from monocular video based on Human Pose Estimation.

Braakman, H.G.D. (2021) Human impedance regulation in haptic control using electromyography combined with the posture of the human arm to increase transparency within telemanipulation control.

Brake, M. te (2021) Insights in SLAM algorithm modularity from RTAB-Map and ORB-SLAM2.

Bravo Cabrera, Miguel Angel (2020) Essay #86319

Brethouwer, M.F. (2015) Design of a testbed for the calibration and RFI mitigation algorithms used in OLFAR.

Brink, Aernout van den (2021) Towards interconnecting dopant networks.

Brink, E.T.G. van den (2011) Parallel sampling from individual cells on a microchip : towards a parallel single cell analysis platform.

Broenink, T.G. (2016) On reusable SLAM.

Broersen, Jeroen (2009) Towards a detection and recognition system for freshwater fish.

Bruijn, D.S. de (2018) Electrowetting-controlled diode-like behavior of suspended graphene membranes.

Buijs, R.D. (2015) A Light Direction Sensor for Integrated 3D Vision.

Buit, Erik (2005) PC104 stack mechatronic control platform.

Bustillo Rodriguez, A. (2018) Validation of a machine learning approach and control strategy for a rehabilitation robot to train the upper extremity in stroke patients.

Bustraan, M.C. (2021) Developing quadratic programming constraints for human safety : an application of unified safety criteria to multi-task robot control.

Capelle, F. van (2013) Design and validation of a face recognition framework.

Cernat, Catalin (2021) Tissue characterization of puborectalis muscle from 3D ultrasound.

Chavan, S.S. (2020) Item availability restricted.

Cheng, W. (2006) The design of a new power combining technique for the RF power amplifiers.

Chevalking, S.K.L. (2011) Reviewing and optimizing the security of FIGO.

Cobos Mendez, R. (2018) A robotic social actor for persuasive Human-Robot Interactions.

Colenbrander, Roderick (2009) On FPGAs with processor cores for embedded control systems.

Damstra, M.C. (2004) Path search algorithms for application in W-CDMA systems.

Daniele, L.M. (2006) Toward a rule-based approach for context-aware applications.

Deen, Bart (2008) A software solution for absolute position estimation using WLAN for robotics.

Dekker, Stefan (2014) Bead Separation using impedance spectroscopy and dielectrophoresis.

Delaere, Y. (2020) Design of a machine vision based faulty bead wire detection system.

Delgado-Teran, J.D. (2020) 2D Random walk analysis of center of pressure trajectories in low back pain patients.

Deligkaris, K. (2011) Development of an 11000 electrode high-density multi-electrode-array system for neural network recording.

Dertien, Edwin (2005) Realisation of an energy-efficient walking robot.

Dias, P.R. (2018) Development of PI-ETPU based sensors for prosthesis control.

Diemen, Msc. Chris R. van (2018) Experimental verification of a model for predicting the frequency spectrum generated by a sPWM power converter using FM theory by use of a GaN halfbridge module.

Dijkshoorn, A.P. (2019) Characterizing the Anisotropic Electrical Properties of 3D Printed Conductive Sheets.

Dijkstra, Jelle (2014) Adaptation to Low-frequent Stimuli in Computational and Cultured Neuronal Networks.

Dirne, Hans (2005) Demonstrator of advanced controllers.

Doggen, C. (2010) Wireless state feedback and control of a pipe inspection robot.

Dokter, J. (2020) Segmentation and classification of skin lesions using neural networks.

Dorp, H. van (2010) Electrochemical characterisation of silicon nanowires.

Dorp, J. van (2019) Development of a soft robotics diaphragm to simulate respiratory motion.

Dove, I. (2014) Analysis of Radio Propagation Inside the Human Body for in-Body Localization Purposes.

Dresscher, Douwe (2010) Robust autonomy for the youBot.

Droogendijk, Harmen (2009) Design and fabrication of a bulk micromachined accelerometer for geophysical applications.

Duiven, M. (2011) Feasibility study for a CMOS integrated Optical Receiver for FLIM.

Eenink, H.G.J. (2017) Highly tunable hole quantum dots in Si-Ge shell-core nanowires.

Eglence, E. (2003) Design and Realization of a Safe Control System for a Parallel Manipulator.

Ekelmans, P.D.A. (2019) Item availability restricted.

Ekris, C.J. van (2020) Pump diagnostics using machine learning.

Ellenbroek, T.T.M. (2013) Ultrasound-guided control of a minimally-invasive surgical instrument.

Elshout, Tjeerd van den (2006) Obtaining time reduction, in the movement of a clamp mechanism.

Elzakker, M. van (2006) Low-power analog-to-digital conversion.

Engelen, Thiemo van (2004) CTC++ enhancements towards fault tolerance and RTAI.

Engelgeer, Timo (2017) Designing a wireless node-based energy meter to measure both real and reactive power.

Es, Frank J. van (2008) Type inference for graph transformation systems.

Evci, H. T. (2020) Efficient and Reliable Delivery of VR over 5G Mobile Networks.

FEIJTEN, T. (2017) MFManufacturing: porting the fertility chip to the standard platform.

Faber, T.D. (2007) Designing a Low Noise Amplifier for Satellite Receivers in CMOS technology.

Feenstra, A. (2012) Optimale seinplaatsingen : een branch-and-bound algoritme voor de plaatsing van spoorwegseinen.

Fennis, BSc Robert (2019) Item availability restricted.

Ferdinando, Hany (2004) Fault-tolerance in real time distributed system using the CT Library.

Fortgens, L.C. (2012) Approximation of an ideal bandpass filter using an N-path filter with overlapping clocks and harmonic rejection.

Ganesh, Manasa (2020) An Improved Soft-Robotic Knee Brace to Enhance the Knee Stability for ACL Deficient Patients.

Gao, Yang (2009) Microfluidic structures for separation of blood cells and bacteria.

Garza Morales, G.A. (2016) Increasing the Autonomy of the Pipe Inspection Robot PIRATE.

Geertsema, J.B. (2017) Item availability restricted.

Getrouw, J.S.D. (2019) Quantification of simulated pathological synergies in stroke patients using a multisensory system based on inertial sensing and sEMG.

Gies, S.H. (2017) Ornithopter flight dynamics : measurement and analysis of the Robird's Flapping Wing.

Gogeascoechea Hernandez, A.D.J. (2019) Trans-Spinal Direct Current Stimulation in Incomplete Spinal Cord Injury Subjects: Analysis of Motor Unit Activity for a New Class of Biomarkers.

Graat, J.J. (2018) Energy-based control of an underactuated quadrotor using a geometrical spring-damper approach.

Grefte, L.J.L. (2020) Autonomous navigation of the PIRATE using reinforcement learning.

Grift, Rasmus van der (2021) Development of finger vein phantoms with realistic finger vein patterns.

Grinten, B. van der (2013) A step in the right direction : modelling and analysis of a robotic leg with an energy storage system.

Groen, M.C. (2018) Assessing the Effect of Smart Reinforcement Alternatives on the Expected Asset Lifetime of Low Voltage Networks.

Groenesteijn, J. (2010) MEMS-based step-up voltage conversion for comb-drive actuation.

Groeneveld, D.J.A. (2010) Bandwidth extension and noise cancelling for TIAs : wwo new common source TIA implementations.

Groenland, A.W. (2006) Hot tips for chemistry : development of a carbon nanotube based field emitter array for plasma chemistry on chip.

Groothuis, Marchel (2004) Distributed HIL simulation for Boderc.

Grootjans, R. (2016) Design of an Astronomy Front End for Orbiting Low Frequency Antennas for Radio Astronomy.

Grootjans, Roelof (2016) Detection of dispersed pulsars in a time series by using a matched filtering approach.

Gunneweg, Freddy (2015) Measurement of network activity in acute slices of the healthy and parkinsonian striatum on microelectrode arrays.

Guo, Xiaohu (2005) Design and realization of a one-dimensional vibration isolation setup for floor vibrations.

Gurusamy Muthuvelrabindran, A.M. (2021) Invertible recurrent inference machines for low-dose computed tomography.

Gutierrez Perez, V. (2009) Power signal measurements.

Hageman, T.A.G. (2013) Tracking of the tongue in three dimensions using a visual recording system.

Hagos, Ambesagir S. (2010) Geocasting solution for bluewave services in the context of vehicular communications.

Hardeveld, E. (2018) Item availability restricted.

Hartman, T.H.F. (2018) Improvement of Digital Signal Processing for Multichannel TDEMI Measurements.

Have, B. ten (2018) Control meter for static energy meters used to validate the readings in cases of EMI issues.

Haven, H. (2020) Submodel-aware testing.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Havinga, Thijs (2021) MmWave Beam Control for Geocasting in Vehicular Networks.

Heide, Hans van der (2021) Synthesis and classification of ghost fingerprints.

Heinen, G. (2003) Turbo Multiuser Detection Architectures.

Hemert, T. van (2009) On the modeling and simulation of novel schottky based silicon rectifiers.

Hendriks, J.P.A. (2001) Realization of Tool Support for CSP Diagrams and Generation of Concurrent Java Software.

Hendrix, J.M. (2018) Impedimetric analysis of the activity of single fluid cracking catalyst particles.

Heusden, A.J. van (2011) Automatic Gain Control ADC based on signal statistics for a cognitive radio cross-correlation spectrum analyzer.

Hidayat, Zulkifli (2004) Comparison of Learning Methods in the Learning Feed-forward Control Setting.

Hillerström, F.H.J. (2016) Deep verification learning.

Hobert, E.C. (2020) Integrating Energy Awareness into Sequence Control.

Hoek, F.J. van der (2019) Optimizing wireless video streams for computer vision.

Hoek, W.A. (2018) Item availability restricted.

Hoesel, L.F.W. (2002) Design and Implementation of a Software Defined HiperLAN/2 Physical Layer Model for Simulation Purposes.

Hoff, Joost van der (2015) Transport through single-acceptor transistors in Silicon.

Hofmeijer, E.I.S. (2019) Machine learning and deep learning for better assessment of the big-3 diseases in health care.

Hofstede, A. (2020) Integration of hard and soft real-time tasks in cyber-physical systems.

Hofsteenge, M. T. (2020) Convolutional autoencoders to process 4D gynaecological data.

Holland, Mark van (2021) Control methods and architectures for aerial manipulators in physical interaction with humans.

Hollander, K.J.C. den (2020) Evaluation of the structured design method on discrete-events in cyber-physical systems.

Hoogt, K.J.J. van der (2017) Flow visualisation using small bubbles inside opaque structures : An experimental approach.

Horlings, Wouter (2021) Evaluation of a feature-based design method for rapid development of hardware in Cyber-Physical Systems.

Houwelingen, Fabian van (2006) Frequency division.

Huijgen, Mark (2005) Patterns for dependable and distributed embedded control.

Hulman, T. (2018) Item availability restricted.

Hummel, F. van (2021) Item availability restricted.

IJzereef, R.M.M. (2020) Item availability restricted.

Iakovou, Dimitrios (2003) Recognition of Structures in Numerical Data.

Isrie, S.V (2018) Measuring, logging, and visualizing pulsed electromagnetic fields combined with GPS location information in augmented reality.

Jansen, Bas (2003) Service profiling in business to business web services.

Jansen, D.J. (2020) Item availability restricted.

Jansen, J. (2021) Item availability restricted.

Janson, T.G. (2014) Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling.

Janssen, Oskar (2009) A finite difference time domain model of an eddy current based measurement system.

Janssen, S.L. (2012) Image-guided control of a continuum robot.

Jeunink, S.P.P. (2017) Electromagnetic sources in the hospital environment : risks analysis and measures for electro-magnetic compatibility (EMC).

Jong, Gerdo (2005) Dual stage actuation in linear drive systems.

Jong, H.W. de (2010) Two-dimensional coding and detection for data storage on patterned media.

Jongsma, T.M. (2010) Connecting Æthereal to the Montium.

Julsing, B.K. (2009) Phenomenological modeling of the human tongue and lips.

Kalpoe, L.V. (2020) Exploration of the possibilities of wireless power transfer for e-bikes and business opportunities.

Kalverboer, J. (2012) Active noise reduction in double-panel structures : decentralized adaptive feedforward control.

Kalyankumar, M.K. (2021) Directional spectrum sensing in 6GHZ.

Kalyankumar, M.K. (2021) Directional spectrum sensing in 6 Ghz.

Kamermans, D.V. (2021) Item availability restricted.

Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.

Kamphuis, Job (2005) Variable batch sizes for Learning Feed Forward Control using Key Sample Machines.

Kanters, N.B. (2020) Direction-of-arrival estimation of an unknown number of signals using a machine learning framework.

Kapoor, A. (2005) A Reconfigurable Architecture of Software-Defined-Radio for Wireless Local Area Networks.

Karampatsos, Ilias (2014) Successful Communication Over a Wireless Link Under the Presence of Other Users.

Karapetian, Armen (2007) Automobile tire profile measurement.

Karavidas, A. (2016) Light Emission Measurements on Diodes.

Kas, Gerrit (2021) Item availability restricted.

Kaspers, R. (2011) Using a time-of-flight camera for autonomous indoor navigation.

Keizer, Hans (2018) Sorting catalytic particles in microfluidics using the Magnus effect.

Keken, R.M. van (2013) Real-Time environmental impedance estimation using a variable stiffness actuator as a variable stiffness sensor.

Kempenaar, J.J. (2014) Communication Component for Multiplatform Distribution of Control Algorithms.

Kerimov, Emil (2020) FPGA-based AES variants against side-channel attacks.

Kerkhof, T.R. (2013) Control strategy for variable stiffness actuators in belateral teleimpedance interaction tasks.

Keuning, J. (2011) Image-based magnetic control of Microparticles.

Keuter, D.R. (2016) Development of an Underwater Fan with Controllable Blade Pitch as an Infrasound Generator for Seismic Imaging.

Khambati, H.M (2019) A soft robotic knee brace for improving stability in anterior cruciate ligament deficient patients.

Khan, Atif Mushtaq (2021) Proposing and Deployment of Attractive Azure AD Honeypot With Varying Security Measures To Evaluate Their Performance Against Real Attacks.

Khatami, Ava (2020) Item availability restricted.

Kivits, Max P.W. (2021) Heterogeneous cooperative target tracking using Nonlinear Model Predictive Control.

Kleinsman, E.J.E. (2013) Modelling local field potentials in the subthalamic nucleus.

Kleinsmann, E.M. (2013) Design of an RF receiver in BiCMOS implementing beamforming to reject interference.

Kluwer, Taco (2001) Development of a test-bed for smart antennas, using digital beamforming.

Koenders, M.J.M. (2010) Field emission and stability.

Koenders, P.A.J. (2002) On the relation between equation formulation of constrained systems and implicit numerical integration and optimization.

Konuk, Ali Riza (2004) Development and Implementation of Compliant Controller On Manus Robot Arm.

Kooijman, Lucas Johannes (2019) Low voltage high performance silicon nitride EOF pump.

Kooistra, Cornelis (2007) Design and testing of embedded control software for the ViewCorrect Plotter.

Koppelman, R.J. (2018) Designing an actuated metamorphic mechanism based on polyhedral structures.

Kortier, H. (2010) Assessment of daily-life dynamic interactions between human body and environment using movement and force sensing on the interface.

Koster, M.J. (2011) µFlow : A compact fluorescence detection system that uses a DVD pickup for the optical detection of beads.

Koster, Pieter A.J.M. (2011) High IMFDR3 Switched-Capacitor Amplifier design in CMOS 65nm.

Kosters, Jelmer Bas (2017) Item availability restricted.

Kriele, M.A. (2018) Noise-based Frequency Offset Modulation Simulation Model Design : For the analysis of Transmit-Reference Medium Access Control in Multiple Access Ad-hoc Wireless Sensor Networks.

Krone, Mark (2021) Item availability restricted.

Kuiper, Guus (2013) Guaranteed-throughput improvement techniques for connectionless ring networks.

Laerhoven, B.J.A. van (2021) Item availability restricted.

Lageveen, J.W. (2019) Developing a Path Planning Algorithm to Enhance the Performance of a Soft Robotic Endoscope.

Lammers, B. (2020) VR-based visual model mediated telepresence using a SLAM generated virtual model.

Lammertink, Tijs (2005) Power-port modelling of an in-plane 3 DOF parallel micro-manipulator with feed-forward position control.

Lavaniya, Saurabh (2021) Design of low airflow sensor to measure airflow near plants leaf.

Lazar, A.I. (2019) Safe use of robotic arms as input devices.

Leferink, F.B.J. (1992) Preventing electromagnetic interference form integrated circyits and printed circuit boards using computer simulation.

Li, C.H. (2009) Quadrature power amplifier for RF applications.

Li, Liang (2014) Embedded Data Compression for Automotive FMCW Radar System.

Lieftink, R.J. (2020) Bi-directional impedance reflection for Cartesian space telemanipulation control to reduce the effect of time delay.

Lin, S.L. (2021) Reconstructing object shape from impedance measurements in a known microfluidic channel geometry.

Lin, YuanXiang (2019) Design of Pneumatic Soft Surgical Robot for Endoscopic NOTES and MIS Application with Reduced size.

Lio, Ron (2020) Item availability restricted.

Liu, Xiaochen (2021) Multipath-Assisted On-Body Tag Localization.

Liu, Yu (2005) Benchmarking of the Key Sample Machine.

Lohuis, R. (2020) Item availability restricted.

Lomillos Rozeboom, L. (2021) Relaxing conservatism of robust disturbance observer based torque control of series-elastic actuators for articulated robots.

Loon, Sebastiaan van (2005) Modeling and gait control of a quadruped robot.

Lorente Rogel, A. (2021) Component-based Slam in RTAB-Map.

Louw, S.J.A. de (2017) Item availability restricted.

Ma, L. (2014) Design, fabrication and characterization of an electrochemical microfluidic chip for drug screening.

Ma, Song (2013) Feasibility study of frequency doubling using an anxor-gate method.

Maan, B. (2010) Comparison of methods for quantitative analysis of dynamic susceptibility contrast enhanced brain perfusion MRI.

Mahrof, Dlovan Hoshiar (2008) Design of a fully integrated RF transceiver using noise modulation.

Manen, B.T. van (2021) Learning to explore and map with EKF SLAM and RL.

Manjesh, M. (2020) Deterministic modelling and parameterization of height-dependent interaction between radio waves and human body.

Manterola, ir. Nahuel (2021) Evaluating the feasibility and effectiveness of multi-perspective stereoscopy for 3D face reconstruction.

Marnette, Thijs (2017) Item availability restricted.

Marsman, G.H. (2013) Exploring magnetic slf-assembly by studying the influence of shape on interactions of centimeter size particles.

Mathivanan, Rajavarman (2020) Texture Based Autonomous Reconstruction of 3D Point Cloud Models using Fully Actuated UAVs.

Meer, Olaf van der (2020) Item availability restricted.

Mekenkamp, E. (2015) Microburner for Wobbe Index measurements.

Menezes, Roshal Nikhil (2019) Embedded thrust estimator design of a brush-less direct current motor used in multi-rotor Unmanned Aerial Vehicle.

Mennink, T. (2010) Self localization of PIRATE inside a partially structured environment.

Mentink, R.J.T. (2021) Item availability restricted.

Meulman, ir. G.R. (2020) A 2-layer 45 degree Slanted Phased Array Antenna with Baffles for 5G mmWave Applications Based on Gap Waveguide Technology.

Meutstege, Esken (2014) Micro-valve with in-plane fluidics using surface channel technology on SOI wafer for use with micro-Coriolis sensor.

Minnema, Jeroen (2020) Towards component-based, sensor-independent and back-end independent SLAM.

Mishra, Nishant (2021) Design and fabrication of an ultrafast expanding microbubble valve array for use in a microreactor to measure sub millisecond reaction kinetics.

Mocioiu, V. (2012) Automatic classification between active brain state vs. rest state in healthy subjects and stroke patients.

Mocking, Ceriel (2006) Optimal design and strategy for the SolUTra.

Mohamed Refai, M.I. (2017) Pressure Insoles for Gait and Balance Estimation.

Mokhtari, Mohammadreza (2019) Investigation of Ferroelectricity in Barium Titanate thin-films and fabrication of BTO based Ferroelectric Tunnel Junctions using UV & E-Beam lithography.

Molen, R.M. van der (2020) Item availability restricted.

Moonen, D.J.G. (2014) Implementation of a Distributed Correlator for Astronomical applications.

Moraru, Alexandru (2020) Iterative computed tomography reconstruction using deep learning.

Moseley, N.A. (2004) Radio Resource Discovery for Ad-hoc Wireless Networking.

Mourik, L.C. van (2002) Design & Implementation of Digital Channel Selection Filters for a Combined Bluetooth and Hiperlan/2 Receiver.

Mukhtar Ahmad, Waqam H.R.A. (2021) Item availability restricted.

Mukhtar Ahmad, Wasam R.A. (2021) Item availability restricted.

Mustafa, Hasib (2014) Optimizing the detection limit of micro ring resonators.

Mustafa, K.A.A. (2018) Establishing wireless communication between a hexarotor and the ground control station through ros nodes.

Nandi, S (2020) Reduction in Controlled Degrees of Freedom for a Cable Driven Variable Stiffness Actuator.

Natarajan, Sriram (2020) Learned clustering for 3D object segmentation.

Nijhof, S.F.J. (2018) Teleoperation using passive control and LUNA network channels.

Odijk, M. (2007) Novel sensor structures for enhanced redox cycling.

Okken, Boi (2021) Design and Development of a Magnetic Non-linear Elastic Element and Control for Progressive Series Actuation.

Olieman, Erik (2010) Charge steered RF PA.

Oort, Gijs van (2005) Strategies for stabilizing a 3D dynamically walking robot.

Oortgiesen, R. (2010) Feasability study of frequency doubling using a dual-edge method.

Oosterkamp, J. (2015) Creating a toolkit for human-robot interaction.

Oostewechel, P.S. (2016) Item availability restricted.

Otto, M. (2005) Mechatronic setup for Boderc project.

Oude Alink, M.S. (2008) Increasing the spurious-free dynamic range of an integrated spectrum analyzer.

Oude Elferink, W.G. (2017) Multi-camera tracking of soccer players through severe occlusions.

Oudshoorn, Luuk (2016) The theory and practice of probabilistic CMOS.

Overbeek, L.M (2015) Controller design for a rail mounted inspection robot manipulator.

Pap, M.G. (2011) Wobbe meter : A calorific measurement system on chip.

Patel, P. (2021) 3D Printed differential force and position sensor based on lossy transmission lines.

Paul, Navneet (2021) TransNeRF - Improving Neural Radiance fields using transfer learning for efficient scene reconstruction.

Perez Lorea, E.A. (2017) 3D printed sensor to detect muscle contraction by means of force myography.

Peters, Elmar (2020) Parasitic resonant tuning for zero switch node ringing in power converters.

Peters, V. (2012) Analysis and design of a low power ADC.

Pieper, Peter (2005) Fast dynamic-model based weight measurement.

Plompen, Roel (2019) Item availability restricted.

Ponte, J. (2020) Item availability restricted.

Pool, W.R. (2021) Use of autoencoders for fingerprint encoding and comparison.

Post, Albert (2008) Endstops for the mechatronic demonstrator.

Post, T.H. (2015) Precise localization of a UAV using visual odometry.

Posthumus, Ronald (2007) Data logging and monitoring for real-time systems.

Posthumus, Wytse Jan (2011) The situated cognitive engineering tool.

Potman, J. (2002) Development of a Multiuser Detection Testbed.

Prins, P.J. (2012) On the effect of antenna coupling on spectrum sensing using a cross-correlation spectrum analyser with two antennas.

Pérez Muñoz, M.B. (2018) Item availability restricted.

Pérez Muñoz, M.B. (2018) Item availability restricted.

Qiao, Yu (2012) Using tall vehicles as next relay hops in VANET multi-hop communication protocols.

Rajan, Siddharth (2020) Lifetime characterization and reliability studies of electrostatically actuated Capacitive Micromachined Ultrasonic Transducer (CMUT) devices.

Rajan, Siddharth (2020) Lifetime characterization and reliability studies of electrostatically actuated Capacitive Micromachined Ultrasonic Transducer (CMUT) devices.

Reiling, N. (2020) Item availability restricted.

Reilink, Rob (2008) Realtime stereo vision processing for a humanoid.

Reurslag, H.J (2020) Item availability restricted.

Reuvekamp, S. (2012) Towards a six degree-of-freedom resistive force sensor : device design and bonding technique.

Rezola Exteberria, I. (2009) Learning Multi-Agent Control with OROCOS.

Ridder, L.W. van de (2015) Design and control of an under-actuated gripper module for interaction with a remote environment.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Rijnbeek, E.H. (2019) Item availability restricted.

Rizwan, M. (2020) SDR based module for Low PowerWAN nodes development.

Rizwan, Muhammad (2020) SDR based module for Low Power WAN nodes development.

Rodrigues, P. (2017) Autonomous ultrasound scanning for breast cancer screening in the presence of a designed breast holder.

Rolink, S. (2013) Cognitive radio: comparing cross-correlators.

Rooij, V.A. van (2019) Low Power System Design of DDPSK Receiver.

Rooijen, MSc M.J. van (2014) Characterization of capacitive deionization concentration profiles for small volume sample preparation.

Roos, R.A. (2020) Design of a direct collocation model predictive control framework for legged locomotion based on whole-body dynamics and explicit contact phases.

Rossem, E. van (2009) Design of a sub-1V bandgap reference in FinFET technology.

Rossem, F. van (2009) Doping extraction in FinFETs.

Rossen, J.R. (2018) Interference robust spatial multiplexing.

Rozendal, S.P. (2021) Field-Weakening and Fatigue Management for Explosive Robotics.

Ruiter, M. (2010) Feasibility study for a clock-controlled analog beamforming frontend.

Ruiter, Mark de (2014) Performance measurement of Hermite-based multi-carrier communication.

Sakthivelu, Uthvag (2021) Stride parameter estimation by fusing Radio and Inertial sensing data.

Sanchez Escalonilla Plaza, S. (2019) Study of semantic segmentation applications for autonomous vehicles.

Sarakiotis, D. (2012) Specification of aperitif polyphase filter bank in cƛash.

Sassen, Thijs (2009) Floating-point based control of the production cell using an FPGA with Handel-C.

Schellekens, T. (2010) Synchronization performance of noise-based frequency offset modulation.

Schenk, L. (2017) Comparison of medium access control protocols for ultra narrowband communication systems.

Schepers, Martin (2004) Modeling a Piezoelectric Inertial Stepping Turntable Using Bond Graphs.

Schippers, Bob (2005) Dislocation engineered silicon Light Emitting Diode.

Schippers, E. (2010) Solving ambiguity problems in phase based profilometry.

Schneider, H.J.L. (2021) The accuracy of a FEM model in predicting phantom deformation.

Scholten, Jasper (2014) Essay #66193

Scholten, Jeroen (2004) Modelling of direct drive motors for performance improvement by design and control.

Schooneman, M. (2015) Measurement of evoked potentials during multiple threshold tracking of nociceptive electrocutaneous stimuli.

Schoot, D.S. van (2012) Electrocavitation in nanochannels.

Schoot Uiterkamp, J.J.A. (2016) Design and implementation of autonomous robotic scanning of the breast.

Schouten, Martijn (2017) Towards additively manufactured complex robotic systems.

Schrijvers, E.A. (2017) Learning Feed-Forward Control with the Python Scikit-learn library.

Schulte, R.V. (2019) Up to MyLeg with data : human motor intent recognition using Multi-Array EMG and machine learning.

Schulte, Rob (2020) Autonomous mapping and navigation of an unknown environment using a reinforcement learning approach.

Schut, Thomas (2017) Sensing of multiple parameters in a micro-fabricated flow system.

Schutyser, Pieter (2005) An optimal controller for Desdemona for an optimal feeling.

Selman, K.J.R. (2017) Development and validation of a position aiding system for inertial motion capture using Microsoft HoloLens.

Semjonovs, S. (2020) Astrobot : The far end of persuasion.

Sempere Chaves, Carlos (2018) Item availability restricted.

Sequeira, Sheona M.M.D.P (2021) 3D Reconstruction of the Deformed Breast Surface from Autonomously Acquired Ultrasound Images.

Seters, Nathan van (2001) Compensation of Friction in the Flight Simulator Stick using an Adaptive Friction Compensator.

Setty, N.K. (2019) Flexo - Flexible Exoskeleton for Therapeutic Use.

Shah, Nimish (2020) 3D Stereovision for Quantification of Skin Diseases.

Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.

Siebel, R. (2017) Video distribution in a D2D enabled 5G network supporting Public Safety Services.

Sikkens, Boudewijn N.A (2017) Modelling, design and fabrication of a 3D force sensitive stylus.

Singh, A.N. (2021) Smart Control of MR safe Pneumatic Stepper Motor.

Sivaraj, M. (2016) Modeling Receiver Properties to Quantify The Receiver Performance.

Slakhorst, Robert Jan (2007) Switched Mode Piezo-Panel Driver.

Smeenge, A.R. (2010) Improving cross-correlation spectrum sensing using two antennas.

Sneep, R.S.M. (2019) Creating a MR safe robotic platform.

Soer, Michiel (2007) Analysis and comparison of switch-based frequency converters.

Spaan, Camilla (2021) Development of a flexible 3D-printed capacitive shear sensor array for interaction force measurements.

Spil, T.A. (2016) User-input device based command and control of the youBot using a RaMstix embedded board.

Sridharan, H. (2021) Development of multiple needle holder for irreversible electroporation treatment.

Stapelbroek, W. (2006) Higher order feedback loop for a pulse width modulator.

Stelwagen, T.J. (2018) Electrochemical detection of DNA at nanoelectrodes.

Stephan, R.A. (2002) Real-time Linux in Control Applications Area.

Struiksma, R.E. (2011) An interference-robust wideband low-noise amplifier with balanced outputs.

Sundaram, J. (2010) Surface tension driven fabrication of three-dimensional microstructures.

Suresh Babu, Nithin (2021) Researching Feasibility of mmWave solutions for Insect Detection Applications.

Svarnovics, Vladislavs (2021) DataMatrix Barcode Read Rate Improvement Using Image Enhancement.

Tanuhardja, R.R. (2013) Item availability restricted.

Tent Beking, Michiel van (2016) Item availability restricted.

Terbonssen, Bas (2019) The relation between TLP and VSWR to improve the ruggedness of LDMOS transistors.

Tichelaar, Jos (2021) Tracking and Compensation for Breast Deformations during Image-Guided Breast Biopsy with a Hand-Mounted Biopsy Tool.

Tiggelman, M.P.J. (2005) Low series resistance structures for gate dielectrics with a high leakage current.

Tijmes, M. (2009) Simulation of a ring resonator-based optical beamformer system for phased-array receive antennas.

Timens, R.B. (2009) Performance evaluation of frequency modulation and slope detection in analog optical links.

Timmermans, L.C.H. (2021) Item availability restricted.

Tolud, R. (2020) Analysis of malicious domains using active DNS data provided by blacklists.

Ton, B. (2012) Vascular patern of the finger: biometric of the future? Sensor design, data collection and performance verification.

Toorn, Olivier I. van der (2017) Combating snowshoe spam with fire.

Top, C.H. (2020) Item availability restricted.

Trouwborst, Cees (2014) Control of quadcopters for collaborative interaction.

Trullas Clavera, B. (2017) Item availability restricted.

Tummers, R.T.L.M. (2012) Design of control strategies for UAVs physically interacting with each other and the environment.

Turkoglu, Mehmet Ozgur (2018) Essay #75933

Twelkemeijer, R. (2008) Design of an audio power amplifier with a notch in the output impedance.

Umrani, A.J. (2020) 3D printed calorimetric flow sensor.

Vacariu, P. (2021) Item availability restricted.

Valk, D.J. van der (2019) RPi-based passive 5-camera system for 3D face acquisition.

Valkenburg, Govert (2001) On training strategies for parsimonious learning feed-forward controllers.

Vardam, Sanjeet Prasad (2021) Vulnerability of 3D Face Recognition Systems of Morphing Attacks.

Vasileios, Papadimitriou (2015) Templated Activated Carbon for Electric Double Layer Capacitors.

Velde, F.J. van der (2016) Electrical measurement method and test structures for determining continuity of ultra-thin conducting or insulating films.

Velde, Luuk van der (2013) Theoretical treatment of streaming potential energy conversion using viscoelastic fluids.

Veldhuijzen, B. (2009) Redesign of the CSP execution engine.

Verhaar, Kees (2008) An integrated embedded control software design case study using Ptolemy II.

Verhoef, B. (2009) Design of a high speed digital to analog converter.

Verhoog, M. (2012) Electrohydrodynamic properties of gold surfaces in micro- and nanofluidic structures : Worth its weight or superficial glitter?

Vermeer, Matthias (2019) Item availability restricted.

Vervoort, M.W.S (2017) Electrostatically defined quantum dots in a two dimensional electron/hole gas at the Si and SiO2 interface.

Villamil, J.C. (2012) Design and analysis of a flat sound generator.

Villamil Oostra, J.C. (2012) Design and analysis of a flat sound generator.

Vine, P.H. (2021) Training Facial Recognition with Synthetic Faces.

Visser, Ludo (2008) Motion control of a humanoid head.

Visser, P.M. (2002) Control Software Design and Safeguarding with the support of UML and CT.

Vissers, E.J.P. (2018) Optical nonlinearity in titanium dioxide waveguides.

Vliet, Frank van (2010) Threat detection systems.

Voicu-Spineanu, A.O. (2021) FPGA Acceleration of a hierarchical clustering and data fusion application for disease subtype discovery.

Vollenbroek, J.C. (2016) Design and characterization of a microreactor for monodisperse catalytic droplet generation at elevated temperatures and/or pressures.

Vonk, R.V. (2012) Likelihood functions for Window-based stereo vision.

Vos, S.P. de (2020) Item availability restricted.

Vreeken, R (2019) Item availability restricted.

Vries, BSc G.J. de (2019) Development of a myocardial perfusion phantom.

Vries, R.A. de (2018) Impact of the indoor propagationchannel on a novelBluetooth-compatible ranging method.

Vrooijink, G.J. (2012) Real-time three-dimensional tracking and steering of flexible needles using two-dimensional ultrasound images.

Vugt, Pieter van (2013) Behavioral models of nonlinear power consuming loads.

Vural, Gürhan (2011) Microwave power amplifier design using stack topology.

Walle, R. C. M. van der (2019) Streaming array modelling and generating VHDL with Python.

Wang, S. (2020) Gender obfuscation through face morphing.

Wang, W (2019) Comparison of Power Line Filter Orientations.

Wang, Yi (2018) Modeling, design and characterization of a thermal flow sensor.

Weenk, D. (2011) Automatic identification of inertial sensors on the human body segments.

Wei, Z. (2008) Design of application specific high bandwidth Nyquist DAC.

Welleweerd, M.K. (2017) 3D Printing a three degrees of freedom force sensor.

Wenting, M.J.M. (2015) Item availability restricted.

Westendorp, T.H.F. (2019) On the optimization of lossy energy storage devices.

Westerdijk, B.P.J. (2020) Item availability restricted.

Westerik, P.J. (2014) MEMS acoustic sensors inspired by the locust ear.

Wettum, Y.C. van (2021) Item availability restricted.

Wigchering, R. (2021) Item availability restricted.

Wiggers, F.B. (2013) Measuring the dielectric constant of liquid on a chip with silicon nanowires : scientific investigation of the measurement principles and functionality.

Wijngaarden, P. van (2011) Frame capture in IEEE 802.11P vehicular networks: a simulation-based approach.

Wijnholt, R. (2017) Design of a real-time network channel in LUNA.

Willemink, G.H. (2005) Segmentation and Motion Estimation of Multiple Independently Moving Objects in Stereo Video Streams.

Willink Castro, Teodoro J. (2012) Antenna system design for OLGAR"s inter-satellite link.

Wilterdink, Robert (2011) Design of a hard real-time, multi-threaded and CSP-capable execution framework.

Wit, Erik de (2016) Charge carrier transport through silicon nitride membranes and fabrication of solid-state nanopores.

Wittenstrom, B. (2019) Designing arm for placement of an impact hammer in sewers.

Wittenstrom, B.K. (2021) Unifying state representation learning with intrinsic motivations in reinforcement learning.

Wotte, Y. P. (2021) Optimal Potential Shaping on SE(3) via Neural Approximators.

Wu, Kai (2014) Design, Fabrication and Characterization of a Piezo-electric Micro Control Valve.

Wu, Q. (2021) Investigate an optical readout method for a micro Coriolis mass flow sensor.

Wu, Sheng Chih (2021) Generation of Lung CT Images Using Semantic Layouts.

Yazdani, R. (2019) Detection of Malicious IDN Homoglyph Domains Using Active DNS Measurements.

Yu, S. (2020) Fingerprint recognition based on spectral minutiae representation and deep learning.

Yuetian, Zou. (2016) Item availability restricted.

ZOMPAS, A. (2016) Development of a three dimensional path planner for aerial robotic workers.

Zakiy, Mochammad Fadhli (2016) HW-SW co-Design of an On-Chip IJTAG Dependability Processor.

Zanen, J.O.P. (2017) Item availability restricted.

Zanten, S. van (2020) Item availability restricted.

Zee, R. van der (2020) Cutter tooth replacement robot.

Zhang, Xinwen (2021) Energy-aware configuration and coordination of control-software for robotics.

Zhang, Yuchen (2005) Real-Time Network for Distributed Control.

Zhao, Wei (2018) New physical effects induced by the PZT layer integrated in AlGaN/GaN HEMTs.

Zijlma, Emiel E (2020) Item availability restricted.

Zon, K. van (2011) Scenario based SLAM.

Zonneveld, T. van (2021) 3D finger vein patterns : acquisition, reconstruction and recognition.

Zuijlen, Jasper van (2008) FPGA-based control of the production cell using Handel-C.

Zwiep, L.G.H. (2021) Mechatronic solution for stress-wave generation using impact echo.

van Tiem, J.A.J. (2014) Modeling, design, fabrication and characterization of a biomimetic angular acceleration sensor.

This list was generated on Mon Dec 6 06:04:36 2021 CET.