University of Twente Student Theses

Login

Domain: 33 physics

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Year | Item Type
Jump to: Essay
Number of items: 480.

Essay

Aanen, Mattijs (2023) GNSS-Based Time Synchronisation for Distributed Radio Localisation on Software-Defined Radio.

Acun, Adil (2013) Growth of silicene on Ag(111) studied with low energy electron microscopy.

Albers, H.J. and Bone, S.W. de (2012) Growth of PbTiO3 and BiFeO3 thin films on flat and three-dimensional SrRuO3 surface morphologies.

Alimawi, Madhat (2023) Cascaded H-bridge Converter Integrated with Split Batteries and with Multilevel AC Output for Household Applications.

Appeven, Louis van and Voorde, Sophie ten (2015) Akoestische levitatie.

Arendshorst, M.G. (2021) Micro-pump optimization for applications in CubeSats.

Arts, R. (2008) Probing the guided modes of a 2D photonic crystal slab using attenuated total reflectance.

Atesci, Hüseyin (2013) Ellipsometric study on gaseous layers at the solid/water interface.

Aukes, T.A. (2015) Analysis of domain structure and dynamics in tetragonal Lead Zirconate Titanate.

Avgidis, F. (2016) Single charge transport and charge sensing in quantum dots.

Awan, M.U.B. (2021) Simulation and measurement-based characterization of the transmitting, receiving and scattering figures of UAV wireless station.

Baar, M.L.R. van den (2013) Torsion dependence of the critical current in a superconducting Nb3Sn wire: modeling versus experiment.

Bakhuis, D. (2014) Effects of boundary variations on Rayleigh-Bénard convection.

Bakker, Wouter (2019) Automatic detection of outlandish signal behaviour in the spectrum of cellular networks.

Barreaux, J. (2012) Coherent control of high-harmonic generation.

Barreaux, J. (2016) Coherent control of high-harmonic generation.

Barreaux, J.L.P. (2012) Coherent control of high-harmonic generation.

Bastiaan, D.M.C. (2015) Aspects in a clinical environment and probe design influencing mangetometer performance during sentinel lymph node biopsy.

Bastiaens, T (2023) Jerk-based Control of Aerial Manipulators in Physical Interaction with the Environment.

Baveco, M.A. (2017) Item availability restricted.

Beek, A.D. van (2015) Sound of Rain.

Beelen, S.M.J. van (2022) Computational Fluid Dynamics for Personalized Airway Stents.

Beijersbergen van Henegouwen, D.G. (2024) Design of a 3D printed device for monosize microbubble production on a chip.

Berg, Pim Jasper van den (2012) dSTORM for alpha-synuclein clustering on supported lipid bilayers.

Berg, Rutger van den (2021) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Berg, Thijs van den (2018) Ambipolar charge sensing in silicon quantum dots.

Bergen, Anne (2015) Dynamic behavior of hybrid magnetic shields for satellite-based tes arrays.

Berndsen, F.B.W. (2016) Development of a port-based modular simulation model of the Robird using an iterative approach.

Bhojwani, Joshua (2021) Electrical Investigation of Single Charges in Silicon Nanostructures.

Bijl, Y.J. van der (2022) Optimization of a single-electron transistor for charge sensing.

Binsbergen, S.A. van (2015) Hyperspectral vibrational imaging of tumor tissue.

Binsbergen, Sven van and Frentrop, Raimond (2012) Improving signal-to-noise ratio in fluorescence detection for medical purposes.

Bloemen, Oscar (2012) Flow near the contact line of an evaporating droplet.

Bloemert, J. (2019) Modelling and characterization of a relative permittivity sensor.

Blommestijn, L.P.P. (2021) Het meten van vloeistofeigenschappen met een PlexiLoc optische uitbreidingskit.

Boamfa, Ana and Keurhorst, Alieke and Nuijen, Juul and Vrielink, Bram (2020) Peroperatieve plantaire drukmeting bij een Charcot voet reconstructie.

Boamfa, Anamaria (2022) Chain dynamics as a measure for internal friction in the intrinsically disordered protein alpha-synuclein.

Boer, M.C.J. de (2024) Characterization of Frequency and Flow Response of Magnetically Actuated Swimming Millirobots with Asymmetric Helical Body.

Boerboom, G.P.M. (2013) Detection and analysis of neutrophilic granulocytes on opsonized gold islets with Raman spectroscopy.

Bogt, R.W. ter (2015) Continue Capacitieve Ontzouting.

Bollmann, T. (2006) Ar+'s impact on Cu(001) : a combined study of moleculair dynamics and kinetic Monte-Carlo simulations and scanning tunneling : microscopy experiments of sputtering processes on Cu(001).

Bolzonella, L. (2022) Root-Cause Analysis of Interfered Current Transformer Due to Pulsed Currents.

Bommer, Jouri and Ruiter, Mark de (2012) Adsorption of redox-active molecules on platinum and boron doped diamond electrodes in nanofluidic electrochemical sensors.

Bonestroo, D.N. and Gerritsen, L.H. and Huijsmans, S.D.M. and Vahl, R. (2023) Aangezichtsprothetiek op afstand : De ontwikkeling van een innovatieve workflow en vergelijking hiervan met de huidige workflow om de intrinsieke huidskleur op afstand, zonder fysiek contact, te benaderen.

Bonnema, M.J.S. (2022) Inline Micro-fluidic Relative Permittivity Sensor Based on Silicon Wafer Technology.

Boom, B. and Groendijk, H. (2013) Characterization of needle-free injection into soft matter and skin with continuous jets.

Boonstra, Sander (2019) In vivo measurements of human tongue elasticity using a volume-based aspiration method : towards a personalized biomechanical tongue model.

Bos, Jonathan (2022) Heating Solution for a variable Stiffness Surgical Manipulator.

Bos, P.W. (2022) Potential (passive) flight stabilization and control mechanisms for flapping robotic bird flight.

Bosboom, Vincent (2018) Calculating scattering matrices by wave function matching on Co-Cu interfaces.

Bosboom, Vincent (2021) Modeling and Analysis of Layer Josephson Junctions.

Bosch, J. and Putten, L. van (2013) The bug zapper : killing mosquitoes using acoustical source localisation and a laser to shoot them.

Boschker, Frank B. (2008) Design of a 12bit 500Ms/s standalone charge redistribution Digital-to-Analog Converter.

Boter, Jelmer M. (2014) Towards experimental realisation of spin filtering at the graphene-nickel(111) interface.

Boulogne, M.C. (2022) Designing the tapering of a radially oriented flexure joint.

Boulogne, T. and Derkink, F. (2015) Ultrasonic control over nanorod orientation in evaporative assembly.

Bouwmans, Rens (2018) Intra-cavity light distribution model for photodynamic therapy.

Bošnjak, I. (2023) Transport properties of SnTe nanowires in Josephson junction devices.

Braakman, H.G.D. (2019) Magnetic field sensing on 3D-printed structures.

Braat, A.R. and Hassanu, K. and Smit, A.F. (2023) Optimalisatie van fluorescentie-angiografie : standaardisatiestrategieën en meetfactoren die de gemeten fluorescentie-intensiteit beïnvloeden.

Brantjes, R.J. (2024) Aerodynamic interferences for the OmniMorph aerial vehicle.

Bree, K.D.E. de (2023) Development of a convolutional neural network for the detection of the levator plate : a U-net based structure for MR image segmentation.

Brink, Aernout van den (2019) Item availability restricted.

Brink, F. van den (2016) Manipulation of soft grippers for pick-and-place tasks.

Bronkhorst, T.A.W. (2014) Hardware design of a cooperative adaptive cruise control system using a functional programming language.

Bruel, R. and Timmermans, A. (2013) Magnetic Flux Quanta in High-Tc/Low-Tc Superconducting Rings with.

Bruijn, D.S. de (2015) Mapping electron tunnelling in a nanoparticle network to a cellular neural network.

Bruijn, D.S. de (2018) Electrowetting-controlled diode-like behavior of suspended graphene membranes.

Buijs, R.D. (2015) A Light Direction Sensor for Integrated 3D Vision.

Buikstra, L. (2013) Relativistic fluid simulation of plasma-vacuum expansion with LTE closure.

Buitink, Martin and Hekman, Rieks (2014) Influence of dynamic elements in stable tissue phantoms on laser speckle decorrelation times.

Bullee, P.A. (2015) Development of an ice accretion code suitable for mixed-phase icing conditions.

Bullee, P.A. (2012) Oleophobic surfaces by PDMS molding : from simple techniques to advanced surfaces.

Burgt, A. van de (2019) Experimental validation of absolute SPECT/CT quantification for response monitoring in patients with end-stage coronary artery disease.

Busink, K. (2021) 2D PIV experiments of oscillatory flow in a stenosis : a study into the physics of flow of cerebrospinal fluid.

Buskens, Nienke (2023) The Effect of Bending on the Critical Current of ReBCO Based Stack Cables : High Magnetic Fields for Muon Collider.

Bussink, T.W. and Hankel, T.C. and Lemmink, R.M.A.Z. and Semmelink, K. (2015) IJsformatie tijdens cryoablatie : het 2D-modelleren van de temperatuurverspreiding tijdens cryoablatie van prostaatcarcinoom.

Bustraan, M.C. (2021) Developing quadratic programming constraints for human safety : an application of unified safety criteria to multi-task robot control.

Camp, W. van den (2012) Critical current versus transverse stress and thermal stability of a RRP Nb3Sn Rutherford cable.

Castenmiller, Carolien (2015) Superconductivity in the doped topological insulator CuxBi2Se3.

Chang, B.L. (2018) A deep learning approach to estimating permanents.

Chavan, S.S. (2020) Item availability restricted.

Chennaveeranahalli, D.R. (2023) Fabrication and analysis of glucose sensor.

Chimento, Philip F. (2008) Narrowband CARS spectroscopy in the molecular fingerprint region.

Chmiel, Christoph (2011) High capacitance thin films.

Choi, Jeong Young (2023) Machine Learning Approaches in Extending the Capabilities of a Thermal Anemometer for Horticultural Applications.

Choo, Jun Hong (2019) Impactor design and development for in-pipe sewer inspection robot.

Christenhusz, M.T.M. (2020) 2D Box Traps for Bose-Einstein Condensates.

Cloet, Jeroen de and Marissen, Jasper and Westendorp, Ties (2015) Preconditioners based on splitting for time domain photonic crystal modeling.

Coenegracht, B.D. (2018) Measurements and simulations on few arsenic atom transistors.

Cornelissen, R.H.A. (2012) Preparation and characterization of p-n homojunction Cu2O nanowire solar cells.

Dalfsen, K. van (2009) Nd:Al2O3 as a gain material for integrated devices.

Dalfsen, T. van and Dam, J. van (2013) The applicability of SrTiO3 in memristive devices : a preliminary investigation.

Daling, Gerben (2013) Determining the properties of DEME-TFSI for gating purposes.

Dao, H.L. (2012) First-principles study of CPP GMR in Co/Cu multiplayers including substitutional disorder and spin-orbit coupling.

Daoud, Y.F.C. and Zonnenberg, J. and Besselink, I.T.J. and Leussink, K.H. (2023) Kwantificatie van de extra bolus adenosine bij het gebruik van een multi-infusie systeem bij rubidium-82 PET/CT onderzoek.

Dappers, Luuk (2019) Het ontwerpen van effectieve en motiverende practica.

Datadien, K. (2013) Investigation of H-center diffusion in sodium chloride by molecular dynamics simulation.

Daulay, B.Eng O.F.P.G (2018) Investigating Planar Balun Structures with inherent impedance transformation and power combining properties.

Deenen, Christian (2014) SrRuO3 growth on DyScO3 using soft-­lithographic patterning and pulsed laser deposition.

Demirer, Figen Ece (2017) Investigation of a Charge Transfer at Complex Oxide Interfaces.

Dijk, M.W. van (2012) The photonic free-electron laser: a numerical study of its fundamental physics.

Dijkstra, Remko R. M. (2012) Brightness characterization of single core and core/shell Yb3+,Er3+-doped NaYF4 upconversion nanoparticles.

Ding, Daniël (2024) Upscaling Production of Monodisperse Microcapsules for Injectables by In-Air Microfluidics.

Dinteren, R.A.J. van (2020) Axial superresolution using nanophotonic manipulation: How accurate can we be?

Dollekamp, E. (2014) Counterflow heat exchanger design for the E-ELT METIS instrument cooler.

Doller, Daniel (2018) Item availability restricted.

Dommelen, R.C. van (2018) A semi-anthropmorphic photoacoustic breast phantom.

Doorn, M.S. (2021) Translocation of the food-related amyloid fibrils hen egg-white lysozyme and α-Synuclein in in vitro cell models of the epithelial intestinal barrier For the evaluation of risks associated with amyloid fibrils.

Doornbos, J.H. (2023) Wavefront Shaping At The Push Of A Button.

Dragman, T.C. (2019) Identifying Dynamic Nonlinearities due to Damage Precursors in Flexible Structures.

Dubbink, Teus (2012) Very sharp bends with a metal aided KYb0.475Gd0.447Lu0.078(WO4)2 ridge waveguide.

Duinen, D. van (2013) Designing a laser scanning confocal microscope: a new scan engine layout.

Eenink, H.G.J. (2017) Highly tunable hole quantum dots in Si-Ge shell-core nanowires.

Efstathiadis, I. (2023) Quantum (anti)Anthropology : An Synthetic Research on Human Nature.

Elbert, Thieme (2021) Using FRET probes to determine state of disassembly of cowpea chlorotic mottle virus.

Elferink, W. (2015) Superconductivity in Ge/Si core-shell nanowire quantum dots.

Emmerik, C.I. van (2015) The influence of history effects on the diffusion-driven dissolution of CO2 bubbles.

Emmerik, L. van (2013) Manipulation of microparticles with ultrasound acoustic waves.

Enthoven, M.M.F.C. (2018) Error Analysis of Optical Self-Localization using Mapped and Distinguishable Beacons.

Ewals, L.J.S. (2022) Quantification of bowel loop motion and body composition during radiotherapy for gynecological cancer.

Ewals, L.J.S. and Steenhuis, A. and Willekens, S. C. and Niekolaas, M. (2017) Instellingen van een 3 en 7 Tesla MRI scanner ter beoordeling van de mimische lachspieren.

Fokkema, K.W. (2017) From Diffusion of Light to Free-Form Scattering.

Fopma, Remmelt (2020) Item availability restricted.

Franken, A.D. (2017) Extended self similarity in Rayleigh-Bénard convection.

Franken, A.D. (2017) Extended self similarity in Rayleigh-Bénard convection.

Franken, A.D. (2020) Drag reduction in two-phase Taylor-Couette flow.

Freije, R.J.H (2019) Item availability restricted.

Gaastra, F. and Nieland, J. (2014) Item availability restricted.

Gao, A. (2010) Influence of nanoscale surface roughness on flow behaviour in fluidic microchannels.

Geerdink, B. (2013) Splashing of Leidenfrost druplets.

Geijs, D.J. (2019) Een systematische aanpak voor het ontwikkelen en rangschikken van leerlijnen.

Gerritse, T.J. (2019) FDG-dose prediction and small lesion detection using advanced PET technology.

Geskus, D. (2006) Design and construction of regenerative amplifier and compressor for chirped pulse amplification.

Geurink, B.M. (2023) Active MR Tracking in a Static Phantom using a GRASP-sequence.

Gjaltema, C. (2013) Collapse of a sand bed.

Gladović, Nikola (2021) Packaging and waveguiding methodologies for in-package optocoupling.

Gooijer, B.M. d (2013) Sudden bubble formation in carbonated drinks.

Graaf, D.B. de (2013) Detection of chloride ion concentration based on chronopotentiometric sensor-actuator system.

Greveling, Mark (2023) Ultrasound: a reliable method to measure muscle forces around the foot?

Grijsen, chiel (2013) Borstkanker in beeld – Fotoakoestiek als context voor kennisvermeerdering.

Grimbergen, Jeroen (2020) A classical treatment of scalar electrodynamics : Gauge theory in the Port-Hamiltonian framework.

Grinten, B.A. van der (2015) Port based Hamiltonian modelling of flapping wing aeroelasticity using vacuum chamber and wind tunnel measurements.

Groenenberg, A. and Rook, A.R.D. and Sterkenburg, A.J. and Wamelink, I.J.H.G. (2017) Exploring the basic principles for developing a downgraded low-cost lithotripter for application in developing countries.

Groener, Dafne (2020) Effects of ultrasound on cardiomyocyte contractions.

Groenveld, Dennis (2021) Mogelijke middelen om NLT-modules leerdoelgerichter te maken.

Groote Veldman, W.J. (2023) Optimizing BLE Gateway Positioning in Aviation Industry: An Algorithm Based on Link Budget and Log-Distance Path Loss.

Grootkarzijn, R. (2023) Adaptive Feedforward Control for Active Vibration Isolation Systems with Motion Stage and Nonlinear Dynamics.

Haase, A.S. (2012) Transport over a bubble mattress : the influence of interface geometry on effective slip and mass transport.

Hagen, R.A.J. (2007) Spectral Investigation of a 2-Dimensional Photonic Crystal Slab for mid-Infrared Radiation.

Haklander, W. (2020) Quantum mechanical modelling of carbon nanotube transistor.

Hanskamp, Gernt (2023) Finding eigenmodes of linear systems using a universal preconditioner with applications to dielectric cavities.

Hasper, Marvin (2021) The relation of follow-up recommendations after breast cancer during the COVID-19 pandemic to the individual risk of breast cancer recurrence.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Heemstra, Berwout (2023) Controlled deposition of gold nanoparticles on faceted SrTiO3 photocatalyst particles.

Heeringa, T.J. (2017) Inverse boundary problem with the Maxwell Equations : an alternative method to breast cancer detection.

Heide, D. van der (2020) Modeling zonal and progressive liver fibrosis : 3D in vitro model of a fibrotic liver lobule using anisotropic nanocomposite hydrogel.

Heidemann, Claudia (2018) Characterisation of a nano-g accelerometer.

Heins, Floris (2015) Gold nanorods : synthesis, imaging and spectroscopy.

Helvert, Majorie van (2019) High-frame-rate contrast-enhanced ultrasound particle image velocimetry near the stented superficial femoral artery : A feasibility study.

Hendrickx, Nico and Hond, Kit de (2014) Rotating a gold nanorod using optically induced torque.

Hendrikx, Cedric (2020) Characterization of segregation in nanometer thin films using hybrid X-ray measurements.

Hendrix, M.H.W. (2013) Air entrainment during impact onto a liquid pool.

Hendrix, M.M.M. (2021) To optimize the detection of magnetic nanoparticles.

Heres, G.C. (2019) A semi-classical model for the thermoelectric properties of cubic SnSe.

Heres, G.C. (2019) A semi-classical model for the thermoelectric properties of cubic SnSe.

Hertog, H. den (2023) Item availability restricted.

Hesselink, A.R. (2015) Normal zone propagation in a YBCO superconductor at 4.2 K. and above.

Hesselink, M. M. J. (2018) Developing a Forecasting Model for the Power Production of Wind Turbines.

Heubach, Kevin and Nelis, Marjan and Spek, Len (2015) Acoustic wave propagation in multi-layered media : An application to hip implants.

Heuvel, S. van den (2023) Hydrodynamic Forces Acting on Vertically Rising Bubbles.

Hoek, H.J. (2020) Enhancing dropwise condensation through active transport of drops using electrowetting.

Hoek, H.J. and Nijenhuis, A.K. te (2015) The influence of electrowetting on the behavior of impacting droplets on superhydrophobic surfaces.

Hoek, Jan van der (2021) Computational modelling of flow in the liver vasculature using the Lattice Boltzmann method to study microsphere distribution.

Hoen, BSc T.J. (2019) Item availability restricted.

Hoeven, Ivo van der and Colijn, Bram (2011) Suppression of coffee rings with electrowetting.

Hoeven, Lars van der (2021) Characterization and demonstration of integrated ring resonator tPUKs.

Hoeven, R. van der (2022) Modelling and simulation of thermoelectric materials with a superionic phase transition using on-the-fly machine learning force fields.

Hoeven, Rick van der (2022) Modelling and simulation of thermoelectric materials with a superionic phase transition using on-the-fly machine learning force fields.

Hof, H.A. (2020) Gaussian beam excitation of optical fibers using the Fictitious Domain Method.

Hof, H.A. (2020) Gaussian beam excitation of optical fibers using the Fictitious Domain Method.

Hoff, Joost van der (2015) Transport through single-acceptor transistors in Silicon.

Hond, J.J.M. de (2012) The energy of polarons and bipolarons in relation to high Tc superconductivity.

Horn, A.J. van der (2012) Beach evolution and wave dynamics in a Hele-Shaw geometry.

Hornman, A.E. (2023) Parametric Study of Scaling Rules for a PEM Fuel Cell in Untethered Microrobots.

Hornsveld, Norah (2014) Characterisation of natural epicuticular wax.

Horsman, B.F. (2021) A first principles study on the ferroelectric properties of the phases of hafnia.

Hove, J.H. ten (2024) Analyzing the protein complex formation of SARS-CoV-2 nucleocapsid protein and α-Synuclein.

Hoving, J.H.K. (2012) THE PHOTOPHONE - Historical research revived with 21st century technology.

Huiskes, M. (2020) Automated robust planning for intensity modulated proton therapy (IMPT) in oropharyngeal cancer patients using machine learning.

Huisman, T.J. (2012) Item availability restricted.

Huizingh, M. (2021) Extensions and simulations of numerical model for picosecond laser-material interaction in bulk sapphire.

Hunt, I.Y.S.E. (2020) Kelvin's thunderstorm.

Ihns, Melanie (2013) Structural engineering of Ca3Co4O9 thermoelectric thin films.

Jaarsma, Ruben (2014) Monolayer MoS2 on a substrate of hexagonal boron nitride.

Jacobs, M.G.J. (2021) Phase transitions in a one dimensional atom chain.

Janbroers, J.M. (2019) Developing an MR safe calibration and interface module for pneumatic stepper motors.

Jansen, Jorn (2018) Endoscopic end effector control using soft actuator.

Janson, T.G. (2014) Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling.

Jimidar, I.S.M. (2016) Dissolution modes of droplets on patterned surfaces.

Johanns, S.I. (2022) Performance comparison of FAME and MPB for simulating wave bands of photonic crystals.

Jong, J.E. de (2023) The effect of the injection depth and injection volume on the wheal size in the Skin Prick Test.

Jong, M. de (2022) Selective pick-up and placement of single cells.

Jonker, J.S. (2017) Step Free Energy - The equilibrium shape of a hexagonal lattice.

Jonkheer, A.J. (2020) Solving the obstacle problem : Finite element simulation with a study on exact solutions.

Jonkman, Remi (2017) Implementation of a reliable 2D approximator using sonar.

Jurriëns, Stefan (2019) A Decision Support Tool for the Medium Voltage Networks Expansion Problem.

Kaal, Joris (2021) Enabling Chip Characterization & Providing Chip Information : Characterizing fluid flow in a microphysiological system using PIV-experiments, Lattice-Boltzmann and COMSOL Multiphysics simulations and creating a tool to provide this information to users with a scenario-based rapid-prototyping co-creation process.

Kaewborisut, D.B.Q. (2023) Self-generated 3D point cloud with raw data from FMCW radar.

Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.

Kamp, Pieter (2012) Magnetic self-assembly in 3 dimensions at the macro scale.

Kanis, E. (2023) Item availability restricted.

Kannan, Narasimhan (2019) An inverse scattering problem to reconstruct refractive index distributions.

Kaptein, J.A. (2020) Gold nanoparticles for biosensing.

Karavidas, A. (2016) Light Emission Measurements on Diodes.

Kareem, J. (2022) Hall effect and field-effect measurements of tin telluride nanowire devices for novel topological quantum computation.

Karytsas, Konstantinos (2023) Model-Free Reinforcement Learning Control of a Pneumatic-Driven Soft Continuum Robot.

Katgert, E. (2021) Using lung-on-a-chip model to study the differences in translocation of nanoplastics through lung epithelium.

Kempen, J. van (2013) Self-assembly of nanowires.

Klaver, Yvan (2015) Theoretical study of passively mode-locked semiconductor-glass lasers.

Klein Gunnewiek, S (2022) Item availability restricted.

Klein Kranenbarg, L.M. (2020) High amplitude, high frequency harmonic modulation of rotating Rayleigh-Bénard convection can more than quadruple heat transfer.

Klein Schaarsberg, M.H. (2015) Interferometric measurement of surface cooling by Leidenfrost drops.

Klein Schaarsberg, Martin H. (2012) Laser-induced cavitation in light-absorbing liquids.

Klijnsma, Thomas and Voerman, Joris (2012) Characterization of Bi1:5Sb0:5Te1:8Se1:2 nanoflakes.

Kokkeler, T.H. (2021) Usadel equation for a four terminal junction.

Kokkeler, Tim (2019) Pulse reconstruction and arrival direction estimation at the HiSPARC experiment.

Koopmans, I.W. (2017) Cerebral saturation and hemodynamic parameters during target temperature management after a cardiac arrest.

Kortman, Bryan (2019) Constraining the standard model effective field theory Wilson coefficients using Higgs and diboson data.

Kosse, Jaap (2013) Critical current degradation in rebco and BI-2223 superconductors under torsional and tensile strain.

Kostakos, John (2013) Relation between Surface Roughness and Adhesion as studied with AFM.

Krabbendam, Rick (2012) Polarization microscopy for visualizing FRET between identical fluorophores : monitoring receptor clustering in live cells.

Krhac, Kaja (2023) Canonical Dirac structure of unitary quantum dynamics.

Krielaart, M.A.R. (2013) Transverse pressure dependence of ac coupling losses in YBCO CORC cables.

Krolis, Eva (2023) Ontwerp van een lessenserie over materialen waarin samenwerking centraal staat.

Kroon, L.A.M. van der (2012) On Faraday waves and jets.

Kuipers, T.P.W. (2022) Superionic Conduction simulated by Neural Network Potentials trained on On-The-Fly Force Fields.

Laerhoven, B.J.A. van (2019) Modelling and characterisation of a pressure sensor implemented insurface channel technology.

Lam, Ching Bon (2013) Monitoring the data quality of the HiSPARC detector array.

Lam, Ching Bon (2013) Monitoring the data quality of the HiSPARC detector array.

Lam, Ching Bon (2013) Interactions of particles with momenta of 1–10 GeV in a highly granular hadronic calorimeter with tungsten absorbers.

Lange, Arthur de (2021) Exploring and enhancing the possibilities and performance of a low-field tabletop MRI scanner.

Lankhorst, Martijn (2014) Thermal activation of the vortex Mott insulator to metal transition.

Lavaniya, Saurabh (2021) Design of low airflow sensor to measure airflow near plants leaf.

Le, Quyen T. (2011) Spin polarized tunneling in hybrid magnetic tunnel junctions comprising C60.

Leeftink, G. (2019) Gas Cleaning: An analysis on Rapsody.

Leering, Erik (2022) Model Reduction of Transport Phenomena with Kernel Principal Component Analysis.

Leersum, C.M. (2015) Magnetic Resonance Spectroscopy as a diagnostic tool for Chronic Splanchnic Syndrome.

Leeuw, N. de (2022) Design and characterization of LC resonators for RF reflectometry charge readout of quantum dots.

Lentelink, S.J. (2019) Arduino lesmodule voor het Natuurkunde curriculum.

Leonardus, Lucky (2010) Study of electronic and magnetic properties of cobalt nanoclusters on graphite.

Lerink, C.W. (2020) Visualisation of fouling during oil-in-water filtration using tubular ceramic membranes.

Leuteren, R. van (2016) Continuous monitoring of respiration with the Hexoskin smart shirt to detect dynamic hyperinflation in COPD patients, the CHOPIN study.

Linnartz, Erik Christian (2014) Contrast agents for continuous wave photoacoustics.

Liuni, D.S. (2023) Analysis of the Effects of Changing Phase-lags and Montages on tACS E-fields.

Lochem, S.H. van (2023) Developing a realistic venous model for in-vitro application of the eduECMO trainer.

Loenhout, F.H.C. van (2022) Designing zero-mode waveguides for fluorescence experiments on α-synuclein and DNA.

Loenhout, F.H.C. van (2023) Het ontwerpen van probleemgestuurd natuurkundeonderwijs in een 3-havoklas.

Lomillos Rozeboom, I. (2020) Beamforming performance evaluation with impact of user model electric properties.

Lubbers, L.A. (2013) Liquid drops on soft solids.

Lubbers, Luuk and Stellingwerff, Sean (2011) Analyzing and simulating the coherent control model.

Löbker, E.M. (2015) Search for long-lived exotic particles decaying to muon pairs : a study performed with 3 fb-1 data collected at the LHCb experiment in 2011 and 2012.

Mak, Jesse (2014) The role of surface plasmons in metal-enhanced chemiluminescence.

Markink, E.M. (2012) Relaxation behaviour of spherical and cylindrical magnetic nanoparticles in liquid media.

Martens, T. (2022) Blood flow simulation in carotid arteries with computational fluid dynamics.

Meent, W.E. van de (2015) Experimental demonstration of reduced bend losses in low-contrast polymer hybrid waveguides.

Meer, A.J.M. van der (2016) Mapping the underworld.

Meevis, Y.H.W. (2023) Quantitative spectroscopic photoacoustic imaging using reference fluence method.

Meijer, A.S. (2022) Kinematic decomposition of quantum systems.

Meijer, S.D. (2018) The implementation of collision avoiding haptic feedback in the pedal-based control of a robotic platform.

Menezes, Roshal Nikhil (2019) Embedded thrust estimator design of a brush-less direct current motor used in multi-rotor Unmanned Aerial Vehicle.

Meuleman, Jelmer David (2022) Automated 120° MMI Based Downconverter Design.

Meulenkamp, A.R. (2020) Avalanche nucleation by impacting an inclined plane of granular material with a particle.

Michorius, M.X.R. (2022) The use of Rayleigh-Raman scattering to investigate milk fat globules.

Mir, N (2021) Performance of handheld probes for Sentinel lymph node detection.

Mok, S. (2017) Passive removal of electrochemically produced hydrogen gas in a microfluidic device.

Mokhtari, Mohammadreza (2019) Investigation of Ferroelectricity in Barium Titanate thin-films and fabrication of BTO based Ferroelectric Tunnel Junctions using UV & E-Beam lithography.

Molen, J. van der (2012) Heavy particles in a cylindrical rotating flow.

Moll, M.C.M. (2023) MRI based 3D models as aiding tool for Parotid Gland Surgery.

Morales Ortega, Luis Rodrigoandrés (2023) A Digital Twin for Ground Water Table Monitoring.

Morsink, Gerben (2011) Tubular jet generation by pressure pulse impact.

Morsink, N.C. (2018) Robotic Transducer Control During High Intensity Focused Ultrasound Treatment of Atherosclerosis.

Muinck Keizer, D.M. (2017) Photoacoustic Tomography for Finger Joint Imaging: Tackling Artefacts.

Mulder, T. (2014) New sorption compressor designs for the METIS cooler in the E-ELT.

Mulder, Tim and Ihns, Melanie (2011) Possible strain scaling relation for YBCO superconductors?

Nass, M. (2018) Finding intelligence in disordered boron dopant atoms.

Nateshan, A.V. (2020) Investigating the application of inductive wireless power transfer in real-world drone charging.

Neut, M.W.M. (2014) Spherical body orientation extraction and Rayleigh-Bénard convection.

Neuvel, P. (2020) Developing a reliable method to connect conductors to 3d printed conducting structures.

Nguyen, Q.H. (2022) Machine learning in the calibration process of discrete particle model.

Niehoff, Dennis (2018) Evaluation of Motion Control Algorithms for Miniaturized Agents Moving Inside 3D Fluidic Microchannels.

Niessink, Tom (2021) In flow magnetophoresis : explorative research towards a cancer watch.

Nieuwenhof, H.B. van den (2021) NCE-MRI as Preoperative Imaging Technique for Hepatoblastoma Surgery : A Pilot Study to Relaxation-Enhanced Angiography without Contrast and Triggering.

Nijboer, T.M. (2024) Kickstarting the Next Step in Urban Mobility. Design of an Interactive Design Tool & a New Urban Electric Vehicle.

Nonhebel, R.P. and Stienen, B.P.J. (2013) Alignment in Integrated Optical Systems.

Noorden, Andries van (2009) Creating correct data for hydraulic applications : a contribution for strengthening and improving the drinking water network in Da nang.

Nugteren, J. van (2012) Normal zone propagation in a YBCO superconducting tape: measurement and analysis of quasi-adiabatic normal zone propagation in a YBCO coated conductor.

Oever, J.J.F. van 't (2011) Optical energy transfer of gold plasmonic antennas.

Okken, B. (2017) Design and Empirical study of tilting propellers of an over-actuated quadrotor.

Olde Olthof, L.A.B. (2018) Interfaces of topological insulators and superconductors.

Ong, C.G.Y (2023) Innovatie van modulaire reservoirs van microvloeistoffen voor “Orgaan-Op-Chip”: verbetering op gebruikersvriendelijkheid, herbruikbaarheid en vloeistof bemonstering.

Opheusden, L.M.E. van (2017) Design of a control strategy for obstacle crossing in a lower limb exoskeleton for SCI patients.

Otten, S. and Lagraauw, R. (2012) Critical current degradation under transverse compressive stress in YBCO-coated superconductive tapes.

Otten, Simon (2014) Transverse pressure dependence of the critical current in epoxy impregnated REBCO Roebel cables.

Ottens, Iris (2017) Regularization fo 3D dyadic Green's function for flat interfaces.

Otter, R.A. (2013) Catalytic performance of zeolite based materials : Study and optimization of catalytic performance of zeolites based catalytic materials towards microreactor applications.

Oude Booijink, N.H.M. (2016) Parallel magnetic particle imaging: compressed sensing of field free line excitations.

Ouderaa, M. van der and Laar, R. van (2013) The bug zapper.

Peek, K. (2011) An Analysis of the Effects of Digital Phase Errors on the Performance of a FMCW-Doppler Radar.

Pellen, B. (2021) Experimental and modelling studies of transverse load on DI-BSCCO tapes.

Perizonius, F.C. (2023) Theoretical modelling of liquid fractions and flow regimes during the first-stage startup of steam transport pipelines.

Peters, Tjitte-Jelte (2010) Fabrication and characterisation of cantilever arrays with integrated sharp tips.

Petri, J.C. (2023) Investigating the effect of graphene nanofillers on the melting of paraffin-based phase change materials.

Plas, P. van der (2013) Dependence of the input-firing rate curve of neural cells on extracellular ion concentrations.

Ploeg, B.S. and Melis, K.W. (2012) Exciting surface plasmons with a Mid-IR OPO.

Plomp, Jelle (2023) Imaging Behind the Plaque - Improved Blood Flow Imaging Using ISAAC: an Iterative Scheme for Active Attenuation Correction.

Plomp, Dhr. Jelle (2023) Imaging Behind the Plaque - Improved Blood Flow Imaging Using ISAAC: an Iterative Scheme for Active Attenuation Correction.

Poel, K. van der (2013) Investigation of methods to benchmark nanofluids.

Poel, MSc R. (2015) Determining the Feasibility of Cerenkov Luminescence Imaging in Surgical Oncology.

Polders, Kay (2014) Imaging of gan-algan high electron mobility transistors.

Prabowo, B. (2018) Item availability restricted.

Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.

Prins, N.M. and Ochten, M. van and Steen, D. van der and Wiggers, R.B.M. (2017) Designing a synthetic model of the esophagus to test efficacy and oxygen distribution of an intelligent oxygen delivery device.

Pris, Miran (2014) Influence of different parameters on wet synthesis of silver nanoparticles.

Putman, E.J. (2023) Real-time 3D MR-Thermometry using a Stack-of-Stars Gradient Echo Pulse Sequence.

Rang, M.S. (2020) Computational methods in quantum mechanics with applications in spintronic calculations.

Rangel, V.R. (2021) 3D Bioprinting in Bioactive Embedding Bath Cartridges for the purpose of Vascularization.

Raven Garcia, J. (2023) A geometric port-Hamiltonian modelling and simulation framework for morphing-wing UAVs.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Reef, P. (2013) Scanning superconducting quantum interference device microscopy : sensitive mapping of magnetic flux on thin films.

Rees, Albert van (2019) Continuous wavelength tuning of an integrated extended-cavity laser beyond its mode spacing limit.

Reijnders, B. (2011) Electromagnetic field measurements inside photonic crystals developing a photonic free electron laser.

Reiling, Nathan (2017) Item availability restricted.

Reinink, Johan (2013) Pulse shaping for high harmonic generation.

Reith, P. (2015) Imaging ferromagnetism on the micrometre scale : a scanning SQUID microscopy study.

Reith, Pim and Hopman, Gerben (2012) Investigating electrodeposition to grow CZTS thin films for solar cell applications.

Renselaar, Erwin van (2023) Scaling rules for microrobots with full energetic autonomy.

Reuling, Jeffrey (2015) Measuring local phase gradients through Partitioned Aperture Wavefront (PAW) imaging.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Rietberg, M.T. (2020) Modelling nanoparticles and their magnetic response in various environments.

Rietveld, M. (2024) Impact of surrounding mediums on the chemical stability of iron-loaded alginate beads.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Ringoot, J.H. (2022) Creation and validation of a 405 nm laser Raman imaging setup.

Roeplal, N. S. D. (2019) The application of a functional approach for detecting wind turbine failures from SCADA-data.

Rolink, Mark and Elburg, Benjamin van (2014) Granular compaction.

Romeijn, Stephan (2019) Towards intra-operative feedback on oncological colorectal tissue type prediction.

Roo, M. de (2015) Optimal Event Handling by Multiple UAVs.

Room, J.T. (2023) Transducer selection & protocol compliance detection algorithm design as a basis for automated point-of-care lung ultrasound screening of tuberculosis.

Rorije, Rob (2015) Electronic polarons in cuprates and pnictides.

Roskamp, T.J. (2020) Investigation of Second Generation Superconductor Tapes to be used for Superconducting Electronics.

Roskamp, W. (2023) RF Heating Mitigation around a DBS lead at 3T.

Rotgerink, J.L. (2013) An in silico description of an alzheimer network.

Ruiter, Mark de (2014) Performance measurement of Hermite-based multi-carrier communication.

Ruiter, R.P. de (2015) An invisibility cloak in a diffusive light scattering medium.

Sakr, A. (2023) Electrostatic Simulation of Bi-Implanted Silicon Single-Electron Transistor Nanodevices.

Schaarman, William (2020) An analysis of Andreev bound states in a system of topological insulators.

Schellevis, H.M. (2017) The effect of membrane topology features on ion transport phenomena.

Schepers, P. (2019) Application of a process model to define potential operational functional failure conditions.

Schneider, Lynn Maria (2014) Hybrid polyPOSS‐amide Membranes for Nanofiltration.

Schoffelen, F.W.T. (2023) Quantitative SPECT and PET Imaging with Iodine Nuclides in Thyroid Cancer.

Scholten, A.W.J. (2019) Contrast enhanced ultrasound to quantify cerebral perfusion.

Schopbarteld, A. (2022) Slater-Koster energy integrals of simple and face cubic crystals.

Schroer, W. (2022) The effect of ambient pressure on the subharmonic acoustic response of monodisperse microbubbles.

Schuitmaker, Wendy (2020) An optimization and evaluation of the CellPrep system for the reuse of anti-EpCAM ferrofluids to isolate tumor cells from blood and DLA products.

Schut, L. (2021) Design of a New Thermal Calorimeter for Power Electronic Systems Review of Efficiency Measurement Techniques.

Schut, Thomas (2017) Sensing of multiple parameters in a micro-fabricated flow system.

Schuttrups, B. (2020) Modelling nonlinear optical pulse propagation using pseudo-spectral methods.

Schuttrups, Bas (2015) Interface models for spin transport through magnetic multilayers.

Schwieters, Sven (2021) Motion artefacts in handheld LSCI Detection of on-surface movements employing optical flow and its relation with speckle contrast.

Schäffer, Justin (2012) Immobilization of TiO2: via different routes for photocatalytic reactions in a PDMS based microreactor.

Senden, J.M.J. (2015) Biasing a ring-oscillator based true random number generator with an electro-magnetic fault injuction using harmonic waves.

Shawrav, Mostafa Moonir (2010) Electron interferometer investigation for coherent electron transport in organic modules.

Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.

Sibma, Steven (2019) Electron Transport through single-bismuth transistors.

Sirboiu, D.C. (2020) 3D printed acoustically transparent pressure sensor for breast cancer detection.

Slootheer, I.B. and Markink, M.H. (2012) The movement of decanol droplets on surfaces with a chemically patterned energy gradient.

Slotman, BSc D.J. (2020) Item availability restricted.

Slöetjes, Sam (2014) Towards controlling the fermi energy in topological materials.

Smink, A.E.M. (2014) Electrostatic tuning of LaAlO3-SrTiO3 interface devices.

Smit, J.R.A. and Walhout, C.J. (2012) The route to superconducting Sr2RuO4.

Smits, R. (2016) Spintronic devices based on the graphene-nickel(111) interface.

Smorenburg, S.P.M. (2019) Preoperative planning and intraoperative image fusion improvement during endovascular aneurysm repair.

Snaauw, G. (2017) Camera calibration for oblique viewing laparoscopes.

Snoeijink, L.H. (2021) Room temperature characterization of DopantNetwork Processing Units. And optimization of the measuring process.

Spannenburg, N. (2013) High speed direct laser writing in microchannels.

Spee, J.G. (2020) Natuurkunde in beeld!: visualisatie van een leerlijn.

Sprang, Angela V. van (2021) Path and Trajectory Planning by Model Predictive Control in Autonomous Racing.

Sprünken, Daan P. (2008) A 2D spatial light modulator for spatio-temporal shaping.

Stapelbroek, Bram (2013) Drop spreading on complex surfaces.

Steen, Gerwin (2013) Probing the role of anchoring ligands in charge separation dynamics of novel zinc- phthalocyanine sensitized TiO2 films through ultrafast spectroscopy.

Steenge, Céline (2022) Establishing a thermal atomic layer deposition process for AlGaN.

Stel, Bart (2013) CO2 sequestration using bacterial surface layers.

Stellingwerff, S.A. (2015) Solar energy harvesting using graphene rectennas : a proof-of-concept study.

Sterl, Florian and Strooisma, Ale (2011) Up-scaling High Harmonic Generation in capillary waveguides based on increasing capillary diameter.

Sterl, S.H. and Ommeren, C.E. van (2012) Flow field visualization and input waveform optimization for a linear plasma synthetic jet actuator.

Sterl, Sebastian (2015) Dynamics of supercooled droplets : Impacts, jets, explosions and more.

Steverink, Pelle (2023) Implementing boundary conditions with Fresnel laws for a finite element method for the Radiative Transfer Equation.

Stroet, J. (2020) Impactor Design for In-pipe Impact-echo Inspection Method: A Morphological Analysis.

Szepieniec, Jesse M. (2012) Magnetoelectric thin film laminate composites for voltage-controlled tunable nonreciprocal RF devices.

Szewczyk, J. (2022) Item availability restricted.

Szybisty, Zuzanna (2023) Modelling and material characterization of Er-doped waveguide amplifiers in polycrystalline Al2O3.

Tabak, P.A. (2018) Prandtl number dependence in sheared Rayleigh-Bénard convection.

Tenger, Q.M. (2019) Lost & Found Orchestra - Sonic Screwdriver.

Tent Beking, Michiel van (2016) Sparse Array Antenna Signal Reconstruction using Compressive Sensing for Direction of Arrival Estimation.

Thirukokaranam Chandrasekar, Krishna Kumar (2016) Tracking and Control of Soft, Self-Folding Miniaturized Agent using Ultrasound Images.

Thompson, David (2014) Angular dependence of Evanescent Field Enhancement on a glass-air interface.

Tichelaar, Jos (2021) Tracking and Compensation for Breast Deformations during Image-Guided Breast Biopsy with a Hand-Mounted Biopsy Tool.

Timmer, Reco (2015) Numerical modeling of superconducting YBCO tapes.

Tjepkema, W.W.A. (2021) Design of a surgical manipulator using smart materials.

Toebes, Isabel (2023) The design and analysis of an onboard control system of a tetherless miniature magnetic robot.

Toet, M.J. (2023) Development of a Ligament-on-Chip Aligning PDL-hTERT cells on a PDMS membrane.

Tolboom, L.C. (2022) Exploring type 2 asthma phenotypes and taking steps towards measurements of respiratory mechanics during exercise.

Vasileios, Papadimitriou (2015) Templated Activated Carbon for Electric Double Layer Capacitors.

Veen, J. van der (2013) Mobility analysis in silicon for high-frequency surface acoustic wave applications.

Velde, Lennart van de (2018) Computational Fluid Dynamics : a clinician's tool for Femoral Artery Stenosis?

Veldhoven, A. van and Capelleveen, B.F. van (2014) Ambient air pressure influence on the dynamic Leidenfrost temperature of impacting droplets.

Veldhuizen, A.R.P. (2024) Reducing Pulsation in External Gear Pump Output for Rubber Extrusion.

Veldscholte, ir. Lars (2020) Coarse-grained Molecular Dynamics Simulations to Study Vapour Solvation in Polymer Brushes: On the border between polymer physics and computational science.

Veltkamp, Henk-Willem (2014) A plug based micro solid phase extraction (uSPE) microfluidic chip for the isolation and purification of DNA.

Ven, B. van de (2015) The influence of annealing on gate-defined quantum dot devices.

Ven, B. van de (2018) Charge sensing of single-hole tunneling events using a single-electron transistor.

Verkerke, Maurits (2015) Carbon doping and V-Pits in AlGaN/GaN HEMT structures on silicon.

Vervoort, M.W.S (2017) Electrostatically defined quantum dots in a two dimensional electron/hole gas at the Si and SiO2 interface.

Veurink, L. (2021) Item availability restricted.

Vialle, F. (2024) Dynamics of ultrasound-driven coated microbubbles confined in viscoelastic capillaries.

Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.

Visschers, S.H.J. (2019) Perception-aware visual odometry.

Visschers, Stephan H.J. (2019) Perception-aware Visual Odometry.

Visser, A. and Klein Teeselink, L. and Eggermont, S. (2021) De mate van persen bij patiënten op zes weken na een Manchester-Fothergill operatie - een pilot studie gebaseerd op anatomische metingen aan MRI-beelden, in vergelijking met preoperatief en één jaar postoperatief.

Visser, Adrie (2024) Real-time analysis of Dynamic Contrast Enhanced Ultrasound for catheter position optimisation in Transarterial Radioembolization : a proof-of-concept study in an ex-vivo perfused porcine model.

Vissers, E.J.P. (2018) Optical nonlinearity in titanium dioxide waveguides.

Vliet, Mick van (2019) Topological Insulators: Tight-Binding Models and Surface States.

Vliet, Mick van (2019) Topological Insulators: Tight-Binding Models and Surface States.

Vlugt, N. van der and Verkerke, M. (2012) Experimental study of the dimensionless wavenumber of capillary waves on semi­ infinite liquid jets.

Vogel, D. W. (2019) Comparison of Motion Controllers for a Flexure-Based Precision Manipulator.

Volbeda, H.K. (2016) Integrated optical networks of microring resonators : a comparison between theory and experiment.

Vollenbroek, J.C. (2016) Design and characterization of a microreactor for monodisperse catalytic droplet generation at elevated temperatures and/or pressures.

Waanders, Sebastiaan (2011) Iron Selenide Telluride : Thin Films and Devices.

Waasdorp, W.P. (2018) Influence of suboptimally forced streamwise streaks on the turbulent boundary layer and shear layer.

Wang, Yi (2018) Modeling, design and characterization of a thermal flow sensor.

Weener, H.J. (2020) Mimicking CAR-T mediated CRS on human endothelium using microphysiological systems.

Weernink, C.J.H. (2022) Light fluence marker for quantitative photoacoustic imaging.

Weggemans, J.R. (2020) Solving Correlation Clustering with the Quantum Approximate Optimisation Algorithm.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Weijers, Martijn (2015) Minimum swing control of a UAV with a cable suspended load.

Weits, Hartger (2012) Measurement of CP violation in the analysis of B0 ! J= KS decays with the 2010 LHCb data.

Wellenberg, R.H.H. (2015) Quantification and optimization of metal artefact reduction in hip prostheses imaging using novel CT-techniques.

Wennen, M. (2020) Effects of positive end-expiratory pressure on the diaphragm : an MRI study of critical illness associated diaphragm weakness.

Wensink, B.P. (2020) A new concept to classically account for varying particle numbers in general relativity.

Wensink, B.P. (2020) A new concept to classically account for varying particle numbers in general relativity.

Wessels, B.J. (2020) A numerical study to help understand the effects of Nasal High Flow Therapy using the Lattice Boltzmann Method.

Westerdijk, W.S.K. (2017) Sound Swarm : experience sound from the inside.

Westerhof, H. (2019) Axial characteristics of a focused-ultrasound-transducer array.

Westerhof, J. (2021) Investigation of spectro-angular albedo of diffuse, glossy, and specular surfaces for enhanced photovoltaic output.

Wevers, Merel (2023) Ontwikkeling van een simulatie om conceptuele begripsvorming over elektrische en magnetische velden te stimuleren.

Wichers Schreur, J.H. (2022) Transient disruption of a blood-brain barrier on-chip using focused ultrasound and microbubbles.

Wiersma, P. and Amram, R. (2013) Characterisation of Si3N4 ring resonators.

Wigchering, R. (2021) Item availability restricted.

Wijk, M.W.M. van (2021) Optimized MRI techniques for image-guided holmium-166 SIRT.

Wijlens, Bart (2016) Intelligent heating of a room.

Wijnands, P. (2017) Het ontwerpen van een middelbareschoolexperiment voor quantumtunneling.

Wijngaarden, Bas (2020) The consequences of inaccuracy of the Cox-Strack method for contact resistivity determination in contemporary research.

Wijngaarden, Bas van (2022) Optimisation of the silicon drift detector.

Wijngaarden, Frans van (2014) Fabrication of a magnetic O-FET based on a semiconducting polymer for spin accumulation measurements.

Wilde, B. de (2019) Dopant networks for energy-efficient classification.

Wildeboer, Jochem (2018) The effect of cleaning on silicon-dopant evolutionary chips.

Will, J.B. (2017) Aerodynamic noise of thin airfoils in turbulent flows : a detailed experimental validation of semi-analytical methods.

Willemse, R. and Carelsen, S. (2013) Heat transfer between plasma and substrate surface during Pulsed Laser Deposition.

Winkelhorst, E.W. (2020) Optimisation of the magnetic procedure to detect the sentinel lymph node in breast cancer patients.

Wit, Erik de (2016) Charge carrier transport through silicon nitride membranes and fabrication of solid-state nanopores.

Witte, Aswin (2015) Model for electronic transport properties of thermoelectric semiconductor materials.

Witteveen, H. (2012) Pattern formation by evaporative drying of colloidal solutions.

Wolf, T. (2016) Design of an Air Factor Sensor based on Light Emission.

Wouda, Anna Maria (2014) Diglycolamide-functionalized amino group-containing platforms for nuclear waste processing.

Xu, Ningxin (2024) A 3D printed general-purpose on-chip micromirror system.

Yin, Sida (2014) Surface initiated atom transfer radical polymerization from silica nanoparticles : molecular weight and polydispersity of three model monomers grown from commercially available silica nanoparticles.

Zaidouni, S. (2023) Revealing protein vibrational modes using plasmonic surfaces.

Zande, I.G. van de (2023) 3D Point Cloud Object Detection for Millimeter Wave Radar : a Synthesis Study.

Zubavičius, R. (2023) Fluid properties estimation and pressure drop sensing based on Coriolis flow sensor using machine learning.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.

This list was generated on Fri Mar 29 06:04:11 2024 CET.