University of Twente Student Theses

Essay

Aaldering, L.J.C. (2022) Creating a smart-grid co-simulation by integrating a communication simulation into a power grid simulation.

Aanen, A.M. (2019) User-controlled routing to implement configurable delay elements in FPGAs.

Aanen, Mattijs (2023) GNSS-Based Time Synchronisation for Distributed Radio Localisation on Software-Defined Radio.

Abdilla, Joseph (2019) Design space exploration of N-modular FPGA structures.

Abdo, Omar Mohammed Nabil (2024) Integrating Power Electronics Stages and Dynamic Load Balancing in Level 2 EV Charging.

Abhinaya, Antoinette (2021) Using Machine Learning to detect voids in an underground pipeline using in-pipe Ground Penetrating Radar.

Abkoude, T. van (2018) Item availability restricted.

Abkoude, T. van (2021) Fading mitigation for optical feeder links using space time block coding.

Agen, Wouter van (2021) Concept development for Line isolation cutter.

Agrawal, Mitul (2021) Towards control of soft robotic knee brace for ACL deficient patients.

Aguilar Boj, E. (2023) Electrochemical impedance spectroscopy of lithium-ion batteries : a data-driven modelling approach using distribution of relaxation times.

Ahmed Mohamed Sameh Alsegaay, Mohamed (2024) Characterization and modeling of a relative permittivity sensor for liquids.

Alammal, Fatema (2021) A Review of Battery Electric Vehicle Powertrain System Requirements and Limitations.

Albers, J. (2021) Item availability restricted.

Ali, A.T.S.A. (2022) Control of redundant mechanical systems in the presence of external disturbances.

Alimawi, Madhat (2023) Cascaded H-bridge Converter Integrated with Split Batteries and with Multilevel AC Output for Household Applications.

Aliyev, J. (2016) TCAD device simulation of novel test structures for determining the lifetime in solar cells.

Aliyev, Javid (2018) Cost-performance analysis of printed circuit boards using hybrid stackup.

Alizada, R. (2016) Experimental investigation of new device test structures for determining the lifetime in solar cells.

Alizada, R. (2018) Characterization of vibrating intrinsic reverberation chamber and comparison with classical reverberation chamber for antenna efficiency measurements.

Alonso Calderon, M.A. (2022) Achieving full autonomy in aerial and physical human-robot interaction control via onboard perception algorithms relying on computer vision.

Alveringh, D. (2013) A Large Range Multi-Axis Capacitive Force/Torque Sensor Realized in a Single SOI Wafer.

Ambrosius, J.I. (2019) The design of a validation experiment for the Tissue Active SLAM model.

Ampudia, Ricardo (2021) Visible Light Positioning for Unmanned Aerial Vehicles.

An, X. (2020) Development and characterization of an HNA etching process for realization of big sensor tubes.

Andreoli, D.S. (2024) Proteome secretion analysis from PCa cell lines using optical and electrochemical measuring methods.

Andreoli, D.S. (2024) Proteome secretion analysis from PCa cell lines using optical and electrochemical measuring methods.

Apeldoorn, O. (2021) Item availability restricted.

Apeldoorn, Olaf (2024) Item availability restricted.

Aponte Urmeneta, J.M. (2020) Designing a sleep monitoring device to induce lucid dreaming.

Aponte Urmeneta, J.M. (2024) Multitone Measurements for the Characterization of EMI Filters at High Power Levels.

Appel, R.N. and Folmer, H.H (2016) Analysis, optimization, and design of a SLAM solution for an implementation on reconfigurable hardware (FPGA) using CλaSH.

Appelman, M.B. (2020) Non-intrusive measurement setup for time-variant mains impedances within the 16 kHz - 256 kHz Band.

Arend, S. (2020) Design of a solar home system for an unelectrified household in a rural community in the province of Limpopo, South Africa.

Arend, S. (2023) Power Electronics for Stand-alone Offshore Hydrogen Production.

Ariëns, D.L.R. (2023) Self-assembled Magnetic Carpets for Cargo-Transport of Millimetric Planar Objects.

Askarzade, Tamerlan (2021) Item availability restricted.

Atanasov, Anton (2019) Item availability restricted.

Athlekar, Saumitra (2019) Measurement of steady-state evoked potentials during transcutaneous electrical stimulation : a pilot study.

Athlekar, Saumitra R. (2022) Enriched Stimulation Protocol for Improved Observation of Nociceptive Evoked Potentials during NDT-EP Method.

Aursulesei, Andrei (2019) Noise canceling methods in power inverters.

Aursulesei, Andrei (2024) Stability Analysis of Power Transfer Using Droop Control in Electric Aircraft Propulsion Systems.

Avgidis, F. (2016) Single charge transport and charge sensing in quantum dots.

Avgidis, Fotios (2019) Assessing barrier properties using impedance spectroscopy in a semi-circular, blood-brain barrier on-chip.

Baardwijk, P.F. van (2020) Item availability restricted.

Baars, C.E. (2021) Multi-frequency electrical impedance myography as an alternative to electro-myography.

Bac, M.J. (2024) Control of a Pneumatically Driven Robot Arm and the Design of a Modular Motor Controller.

Bajracharya, G. (2003) Integrated Design and Implementation Tool for Multi-Agent Controllers IDITmac.

Bakker, J.H.T. (2018) Temperature Independent, Low Reference voltage.

Bakker, J.H.T. (2020) Item availability restricted.

Bakker, T.J. (2022) Comparing processing techniques for real-time force estimation from sEMG.

Bakker, W. (2016) The analysis of passive Wi-Fi tracking.

Balaji, R. (2022) Side channel pattern matching using neural networks on FPGA.

Barazi, M. (2021) Haptic social interaction for avatar robot system: bilateral interaction control and UX evaluation.

Bardas, Dimitris (2024) pH Sensing and Antibody detection with Surface Functionalized ISFETs.

Barkman, A.H. (2022) Investigating electrical properties of ADAM 3D printed 17-4PH stainless steel for integrated sensing functionalities.

Bartelds, J.T. (2012) Design and control of a modular end-effector for UAVs in interaction with a remote environment.

Baselmans, J.A. (2023) Smart hockey stick (to improve engagement and fun for para hockey players).

Baten, Luuk (2024) Ontwerp en Implementatie van een Meetsysteem voor Tractiekrachtregistratie van Veer-gebaseerde Halo-Gravity Traction.

Baumgartner, Wolfgang Andreas (2021) Efficient Video Pipelines for Drone Applications.

Baveco, M.A. (2017) Analysis and design of a (super) low 1/f-noise LC oscillator.

Becker, M.J. (2024) Evaluating the effectiveness of Test Vector Leakage Assessment when performed on Kyber running on a softcore RISC-V processor on an FPGA.

Beek, S. van de (2012) Characterizing Large-Form-Factor devices in a reverberation chamber.

Beekhof, H.M. (2017) High speed FPGA based scalable parallel demodulator design.

Beekman, Niels (2004) Analysis and development of a 2D walking machine.

Beelen, T. van (2024) On the Feasibility of PWM-Switched N -Path Filters.

Been, A.J. (2013) Self-assembly of silicon particles using magnetic levitation.

Bekooij, Bastiaan (2022) Human-aware motion planning in Aerial Human-Robot Handovers.

Beld, W. van den (2012) Microfluidic pump based on arrays of rotating magnetic microspheres.

Belinskis, Rihards (2020) Designing electropneumatic control unit(EPCU)and motor identification setup of the PneuARMM robot.

Benet i Bertran, Joan (2019) Computational model of action selection in Parkinson's disease and the effect of deep brain stimulation.

Berg, M.A van den (2022) The estimation of rodent population in an area with the use of IR&RGB camera images and USV sounds.

Berg, R. van den (2023) Using computer vision for monitoring the peeling process of semiconducting insulation shield of medium voltage cables.

Berg, Rutger van den (2021) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Berg, T.M. van den (2016) Radar sensing for automotive parking distance control applications.

Berge, C. ten (2022) Reverse engineer discontinued KUKA I-do robots and make them applicable for educative use.

Berge, Matthijs ten (2005) Design Space Exploration for Fieldbus-based Distributed Control Systems.

Berhe, Merhawi Tecle (2012) Advanced ranging techniques in uwb based localization.

Berndsen, F.B.W. (2016) Development of a port-based modular simulation model of the Robird using an iterative approach.

Bes, Martijn B. (2020) LC-balun impedance matching for a mixer first RF front-end.

Bes, Martijn B. (2023) Item availability restricted.

Besselink, M. (2013) Item availability restricted.

Beuker, W. (2019) Multi-rate discrete fourier transform characteristics : results of models, simulations, and measurements.

Beunk, L.D.R. (2019) Tangible Tools and Techniques: Co-designing with Locked-In Syndrome.

Bhide, Gaurav (2020) Evaluation of the SUNRAM 5 for performing a full clinical in-situ breast biopsy procedure.

Bhojwani, Joshua (2019) Modelling and Characterization of an Integrated Permittivity Sensor.

Bhuva, N.J. (2024) Explorations of 3D printed elastomeric sensors for force and position measurement.

Bianchi, T.J. (2022) Designing a smart nest box for automated biodiversity monitoring.

Bicker, P.I. (2011) Analysis and design of an ADC for a spectrum analyzer.

Bierma, Hessel (2018) Design of data acquisition solution for prognostics & health management in LED screens.

Bijl, Y.J. van der (2022) Optimization of a single-electron transistor for charge sensing.

Bijlsma, T. (2006) Performance of real-time scheduling on sensor nodes : comparing scheduling algorithms, resource policies and energy conservation methods in AmbientRT.

Bijman, A.L. (2017) A low cost 3D laser-line scanner for facial acquisitio.

Bijman, A.L. (2020) State representation learning using robotic priors in continuous action spaces for mobile robot navigation.

Bijsterveld, D.G. (2020) Using a Thermal Flow Sensor as a Thermal Conductivity Sensor.

Bijsterveld, D.G. (2022) Item availability restricted.

Binnenmars, R. (2022) Hardware design of a mobile education robot, that uses Raspberry Pi 4 and FPGA-board for real-time control.

Birnie, T. (2022) Experimental evaluation of harmonic tag operation in the presence of multiple transmitters.

Birnie, T. (2024) Confidential.

Bloemert, J. (2019) Modelling and characterization of a relative permittivity sensor.

Bluiminck, M. (2020) Design of 3D printed biopsy robot and control using mobile phone application.

Bode, M. S. P. (2017) How to Design an Interactive Installation for Concordia.

Boeijen, R. van (2020) Sysnthesis of distribution network of large antenna array at mm-wave.

Boer, G.R. de (2002) A physical multi-body car model using 3-D (screw) bond graphs.

Boer, Harm (2008) Analysis, optimization and evaluation of a pipe inspection robot.

Boer, S.L. (2017) Robot vacuum cleaner with personality traits.

Bokhove, T. (2016) Improving the model management workflow.

Boksteen, B.K. (2010) A simulation study and analysis of advanced silicon Schottky barrier field effect transistors.

Bollen, L.M. (2021) Hardware acceleration of sweep detection using Clash : Computer Architecture for Embedded Systems.

Bolzonella, L. (2022) Root-Cause Analysis of Interfered Current Transformer Due to Pulsed Currents.

Bonestroo, G. (2012) A safe-guarded multi-agent control system for Tripod.

Bongertman, M. (2020) Geometric state estimator tightly-coupling force and pose estimation for interaction in vision-denied environments.

Bonilla Fernandez, A. (2016) Controller design for Dual-Hemi CVT.

Bonnema, J.T. (2020) Item availability restricted.

Bonnema, M.J.S. (2022) Inline Micro-fluidic Relative Permittivity Sensor Based on Silicon Wafer Technology.

Boom, B.A. (2015) Towards a High Dynamic Range Resonant MEMS Accelerometer.

Boom, Friso van den (2019) Item availability restricted.

Borggreve, D. (2010) Design of a 1.2 volt reference voltage stabilizer in 180NM CMOS.

Born, H. van den (2024) Creating an educational escape room piece about individual climate positive changes in day-to-day life.

Bos, D.M. (2023) The development and evaluation of a novel, non-invasive measuring system for the prevention of diabetic ketoacidosis.

Bos, H.D. (2013) Optimizing a liquid-based energy conversion system.

Bos, J.C.H. (2014) Synthesizable Specification of a VLIW Processor in the Functional Hardware Description Language CλaSH.

Bos, L.C. (2017) Safe cycling for elderly "see".

Bosma, H.R. (2020) Increasing nutrient awareness with the Smart Kitchen Scale.

Bosman, F. (2023) Hardware for DIY at home lab for telemanipulation control.

Boven, H. (2021) Item availability restricted.

Boven, H. (2023) Item availability restricted.

Bovenkamp, Dennis van der (2023) Design of ESR-line for spin control of Bi-implanted Si nanodevices.

Bovenkamp, J.P. van de (2023) Performance of GaN-based Bidirectional Switch using Two-Dimensional Device Simulations.

Branderhorst, G.J.H.J. (2024) Automatic characterization of a DC motor.

Brantjes, R.J. (2020) Analysis of a 3D printed whisker-inspired tactile sensor.

Brantjes, R.J. (2024) Aerodynamic interferences for the OmniMorph aerial vehicle.

Breazu, B. (2020) Characterisation of a micromachined Wobbe index sensor.

Bremer, B. (2022) Design of a fast control system reacting to non-sinusoidal voltage fluctuations.

Brethouwer, M.F. (2015) Design of a testbed for the calibration and RFI mitigation algorithms used in OLFAR.

Brink, A.B. van den (2017) Evaluating Performance and Energy Efficiency of the Hybrid Memory Cube Technology.

Brink, Aernout van den (2019) Item availability restricted.

Brink, Aernout van den (2021) Towards interconnecting dopant networks.

Brink, E.T.G. van den (2011) Parallel sampling from individual cells on a microchip : towards a parallel single cell analysis platform.

Brink, F. van den (2013) Modeling and magnetic-based motion control of a cluster of microparticles.

Brink, F. van den (2016) Manipulation of soft grippers for pick-and-place tasks.

Brinke, N.J. ten (2020) Direct-sequence spread spectrum in backscatter wireless sensor networks.

Broekhof, M.C. (2023) Design of a ’Super Capacitor’ for N-Path Filters.

Broenink, T.G. (2016) On reusable SLAM.

Broersen, Jeroen (2009) Towards a detection and recognition system for freshwater fish.

Bronkhorst, T.A.W. (2014) Hardware design of a cooperative adaptive cruise control system using a functional programming language.

Brouwer, Ruben (2018) A user self-reported emotion feedback system.

Bruijn, D.S. de (2018) Electrowetting-controlled diode-like behavior of suspended graphene membranes.

Bruijn, M.N. (2019) Increasing deterministic behavior of mobile robots by adding a safety layer.

Bruijnes, F. and Smink, A.E.M. (2012) Growth and characterisation of thin film Mott insulator p-n junctions.

Bruins, L.L.E. (2020) Validation of Legal Documents by comparing digital and printed photographs.

Budnik, Mateusz (2023) Design and evaluation of a Ring Oscillator based Physically Unclonable Function.

Buijs, R.D. (2015) A Light Direction Sensor for Integrated 3D Vision.

Buis, Geert (2023) Applying game-theory to evaluate incentives for cooperative behaviour between households within the distribution grid.

Buit, Erik (2005) PC104 stack mechatronic control platform.

Buitenweg, M. (2023) An Oscillatory Neural-Network architecture based on Dopant network Processing Units.

Bukai, E. (2016) Design of a novel needle steering manipulator for minimally invasive guided breast biopsy.

Bunda, S.T. (2018) 3D Point Cloud Reconstruction Based on the Finger Vascular Pattern.

Bunda, S.T. (2022) Limited Resource Optimization for Face Recognition Neural Networks: Sub-byte quantization of MobileFaceNet using QKeras.

Bundo, Silvi (2020) Multichannel electrocutaneous stimulus application for nociceptive system characterization.

Burgt, A.P. van der (2023) AI in the Wild : Robust evaluation and optimized fine-tuning of machine learning algorithms deployed on the edge.

Busscher, S.G.H. (2019) State of the art LC-based frequency reference.

Busscher, S.G.H. (2022) Item availability restricted.

Bussink, E (2017) Characterization of a Gallium Nitride Half-Bridge module for use in a Multi-Freqeuncy Multilevel Modular Converter.

Buursink, J.K. (2024) The design and development of a virtual reality environment for the operator of a teleoperated robot in a test setup.

Buzogány, C. (2024) Optimizing EMI Filter Performance Through Capacitor Placement and Orientation.

Böhmer, Kevin (2023) Radiation resilience evaluation of a Flash-based FPGA with a soft RISC-V Core.

Băileșteanu, V.A. (2024) Measurement of Thermal Conductivity and Volumetric Heat Capacity as a Function of Humidity and Temperature Using a Single Heated Wire.

Capelle, F. van (2013) Design and validation of a face recognition framework.

Cardenas, Carlos A. (2017) Development of a safety-aware intrinsically passive controller for a multi-DOF manipulator.

Cents, R.B.A. (2022) Item availability restricted.

Cernat, Catalin (2019) Analysis of sensors used for interaction-based condition assessment of concrete.

Chandramohan, Aashik (2018) Machine learning for cooperative automated driving.

Chemaly, Trishia (2017) Multimodality image registration for visualization in robotic assisted breast biopsy.

Chevalking, S.K.L. (2011) Reviewing and optimizing the security of FIGO.

Chien, DingJie (2024) A 1.35 - 8.85 GHz SiGe:C HBT Cryogenic LNA with 45 K Minimum Noise Temperature.

Choi, Jeong Young (2023) Machine Learning Approaches in Extending the Capabilities of a Thermal Anemometer for Horticultural Applications.

Choo, Jun Hong (2019) Impactor design and development for in-pipe sewer inspection robot.

Cloet, Jeroen de and Marissen, Jasper and Westendorp, Ties (2015) Preconditioners based on splitting for time domain photonic crystal modeling.

Coba Flores, Kevin Ariel (2021) Item availability restricted.

Cobos Mendez, R. (2018) A robotic social actor for persuasive Human-Robot Interactions.

Coenegracht, B.D. (2018) Measurements and simulations on few arsenic atom transistors.

Colenbrander, Roderick (2009) On FPGAs with processor cores for embedded control systems.

Colijn, S.C. (2021) Item availability restricted.

Corts, R. (2022) Accelerating selective sweep detection software with the GPU architecture.

DAM, M.R. (2015) Auditory processing using CλaSH.

Dadhich, S. (2022) Increasing the accuracy of rodent detection and estimation of the population with sensor fusion.

Dai, Yinping (2020) Modelling the LIFE project using DEMKit.

Dalen, A. van (2018) Project BIG.

Damian, Gabriel-André Dominic (2020) Conceptual design of hybrid battery modules for optimising electric aircraft performance.

Damoiseaux, P.H.P.T.M. (2023) Spincopter: Modeling and control.

Damstra, M.C. (2004) Path search algorithms for application in W-CDMA systems.

Dang, Dinh Viet Anh (2019) Idealized operation of class E frequency doubler.

Daniele, L.M. (2006) Toward a rule-based approach for context-aware applications.

Daulay, B.Eng O.F.P.G (2018) Investigating Planar Balun Structures with inherent impedance transformation and power combining properties.

Davenschot, Jan Henk (2019) Investigating local Scanning Tunneling Spectroscopy workfunction measurements as an alternative to Ultraviolet Photoelectron Spectroscopy workfunction measurements.

Davenschot, Jan Henk (2023) Fabrication and characterization of mesh electronics and in vitro metal electrode arrays.

Deen, Bart (2008) A software solution for absolute position estimation using WLAN for robotics.

Dekker, Stefan (2014) Bead Separation using impedance spectroscopy and dielectrophoresis.

Delaere, Y. (2020) Design of a machine vision based faulty bead wire detection system.

Delaere, Yvo (2017) Implementation and optimization of facial recognition with the IntelRealsense SR300.

Delamare, John S.R. (2016) 3D-printed whisker sensor.

Deligkaris, K. (2011) Development of an 11000 electrode high-density multi-electrode-array system for neural network recording.

Dellink, M. (2023) Linearity improvement techniques for high speed DTCS.

Dellink, Mike (2020) Linearization techniques for CMOS Switched-Capacitor Power Amplifiers.

Dellink, Rick (2020) Performance Comparison of Capacitive Stacking Techniques for Radio Frequency Mixers.

Dertien, Edwin (2005) Realisation of an energy-efficient walking robot.

Deuzeman, J.J. (2024) Item availability restricted.

Dijk, Daniël van (2022) Energy based safety for passive robots performing active interaction tasks.

Dijk, J. F. van (2017) Three dimensional capacitive sensing for wearable technology : a development example for creative technology.

Dijk, Luc van (2020) Item availability restricted.

Dijk, Luc van (2023) Item availability restricted.

Dijkstra, J.K. (2019) Design of a Current-Controllable AC Load for Static Energy Meter Testing.

Dijkstra, Martijn (2024) Determining the most suitable control strategy for extrinsic reliability tests of packaged power devices using intermittent operating life (IOL) testing.

Dijkstra, R.W. (2018) How to design a wearable for coaching in rowing.

Dik, Nienke (2024) Responsible energy consumption amongst university employees: Designing a behaviour change intervention.

Dirne, Hans (2005) Demonstrator of advanced controllers.

Doggen, C. (2010) Wireless state feedback and control of a pipe inspection robot.

Dokter, J. (2016) 20-sim Template for Raspberry Pi 3.

Doppenberg, T. A. (2024) Exploring Haptic Stimulation Patterns to Enhance Breathing Exercises.

Dorp, H. van (2010) Electrochemical characterisation of silicon nanowires.

Dorp, J. van (2019) Development of a soft robotics diaphragm to simulate respiratory motion.

Dotsika, Adamantia (2022) Memory and inference time considerations in a C translated QKeras model.

Dransfeld, MSc. F.J.M. (2023) 3D Ankle Force and Moment In Ankle Fracture Patients Walking With Instrumented Crutches.

Dresscher, Douwe (2010) Robust autonomy for the youBot.

Driel, B. van (2021) Cognitive load design implications for the Modsy controller.

Driessen, Pim (2022) Item availability restricted.

Drijfhout, S.H. (2020) Improving eSports performance : conducting stress measurements during Fifa gameplay.

Droogendijk, Harmen (2009) Design and fabrication of a bulk micromachined accelerometer for geophysical applications.

Duiven, M. (2011) Feasibility study for a CMOS integrated Optical Receiver for FLIM.

Dulfer, Simone (2021) Item availability restricted.

Dulfer, Simone (2024) Towards the realisation of self-aligned nanometre scale tunnel field effect transistors.

Dullaert, S.A. (2022) Friction and resistance as modalities for physicalizing data.

Duraisingam, Prithivi Ram (2014) Crack detection in semiconductor products : machine vision techniques for detection of cracks in semiconductor products.

Eenink, H.G.J. (2017) Highly tunable hole quantum dots in Si-Ge shell-core nanowires.

Eglence, E. (2003) Design and Realization of a Safe Control System for a Parallel Manipulator.

Eidhof, Martijn (2018) Concentration Polarization to Measure the Nanopore Accessibility of Fluid Catalytic Cracking Particles.

Eijkeren, C.E. van (2011) On-chip separation of spermatozoa using dielectrophoresis.

Ekelmans, P.D.A. (2016) Modelling the Output Spectrum of a Direct Digital Synthesizer exploiting a Digital to Time Converter.

Ekelmans, P.D.A. (2019) Item availability restricted.

Elderen, M. van (2022) Designing a stand alone finger vein scanner.

Elderen, M. van (2024) Modulation strategy to eliminate the effect of dead-time on Common Mode Voltage in a Three-Phase, Three-Level Converter.

Elfaramawy, Ibrahim (2017) Designing an accessible workflow for Rapid Prototyping on a homemade 3-axis CNC machine.

Ellenbroek, Frank R. (2005) Hardware integration for a passive optical communication network.

Ellenbroek, T.T.M. (2013) Ultrasound-guided control of a minimally-invasive surgical instrument.

Elshout, Tjeerd van den (2006) Obtaining time reduction, in the movement of a clamp mechanism.

Elsten, J.M. (2020) System for indoor person localization in a healthcare setting.

Elzakker, M. van (2006) Low-power analog-to-digital conversion.

Engelen, Thiemo van (2004) CTC++ enhancements towards fault tolerance and RTAI.

Engelgeer, Timo (2017) Designing a wireless node-based energy meter to measure both real and reactive power.

Erotas, G. (2022) Item availability restricted.

Erotas, Georgios (2019) Measurement consistency and the effect of ground planes on common-mode crosstalk.

Essenstam, L. (2019) Analysing various methods for object extraction and the classification of kitchens.

Etheredge, C.E. (2016) GoSlow: Design and Implementation of a Scalable Camera Array for High-Speed Imaging.

Evci, H. T. (2020) Efficient and Reliable Delivery of VR over 5G Mobile Networks.

Evci, H.T. (2016) Comparison of Tripole and Vector Antenna Applications for Radio Astronomy.

Evers, M. (2021) The design of a prototype handheld 3D surface reconstruction setup for monitoring skin diseases.

Eversmann, H.Y.N. (2019) Computation offloading of augmented reality in warehouse order picking.

FEIJTEN, T. (2017) MFManufacturing: porting the fertility chip to the standard platform.

Faber, J.G.J. (2021) Thermal noise amplification at low frequencies in thermal flow sensors.

Faber, T.D. (2007) Designing a Low Noise Amplifier for Satellite Receivers in CMOS technology.

Fennis, BSc Robert (2019) Item availability restricted.

Ferdinando, Hany (2004) Fault-tolerance in real time distributed system using the CT Library.

Ferla, R.I. (2022) Exploring the GANformer for Face Generation : investigating the segmentation and smile augmentation potential.

Ferla, Romano (2019) Estimating 3D orientation of a body segment during running using one inertial sensor and assuming a cyclical nature of the movement.

Fimbres Ramirez, Roy (2024) Sensorization of Lower Limb Socket for Real-Time Pressure Monitoring.

Folmer, H.H. and Appel, R.N. (2016) Analysis, optimization, and design of a SLAM solution for an implementation on reconfigurable hardware(FPGA) using CλaSH.

Fopma, Remmelt (2020) Item availability restricted.

Fopma, Remmelt (2023) Study the outdoor performance of an open-hardware/source race-level quadrotor.

Fortgens, L.C. (2012) Approximation of an ideal bandpass filter using an N-path filter with overlapping clocks and harmonic rejection.

Freije, R.J.H (2019) Item availability restricted.

Freriksen, Jordi (2024) Modelling and Simulation of Dynamic Reference Selection based SAR ADCs for Input Signals with High Peak-to-Average Ratio.

Frijters, G. (2019) The possibility of digitally recognizing a person using scent.

Fuentes Bongenaar, M.S. (2022) Towards a taxonomy of quantitative emotion measurement using wearables for inclusive user experience research.

Gaastra, S.L. (2021) Dinner Time! : Using technology for the gamification of mealtimes of children with autism to overcome eating problems.

Gabulov, Azik (2017) Demo for the Communication Course using LabView software and software defined radio.

Galvan Hernández, J.A. (2018) Motivational strategies to improve self-management for rehabilitation of older adults.

Gankema, Yvon (2018) Improvement of kitten Scanner.

Gao, Yang (2009) Microfluidic structures for separation of blood cells and bacteria.

Garces Maldonado, Carlos (2023) Compensation of Cross-talk in a Large Piezoresistive Sensor Array.

Garza Morales, G.A. (2016) Increasing the Autonomy of the Pipe Inspection Robot PIRATE.

Geertsema, J.B. (2017) Design of a frequency dividing subsampling phase-locked loop.

Getrouw, J.S.D. (2019) Quantification of simulated pathological synergies in stroke patients using a multisensory system based on inertial sensing and sEMG.

Geurts, Peter (2017) Development of a vane motor servo system for precision positioning in an MRI- or CT-environment.

Geuß, F.M.W. (2021) Item availability restricted.

Gheorghiță, I. (2023) Comparative Analysis of Charging Systems for Heavy Duty Applications : A Review of Size, Efficiency, Sustainability, and Economic Viability.

Gies, S.H. (2017) Ornithopter flight dynamics : measurement and analysis of the Robird's Flapping Wing.

Gifari, Muhammad Wildan (2018) Study on the Design of Soft Surgical Robots for Endoscopic NOTES Application.

Gijsbers, C.J. (2023) Item availability restricted.

Gilda, Timothy (2024) Monitoring of EMI Events in the Proximity of MRI Scanners.

Gladović, Nikola (2021) Packaging and waveguiding methodologies for in-package optocoupling.

Gogeascoechea Hernandez, A.D.J. (2019) Trans-Spinal Direct Current Stimulation in Incomplete Spinal Cord Injury Subjects: Analysis of Motor Unit Activity for a New Class of Biomarkers.

Goswami, H. (2023) A framework for detecting and preventing DoS attacks in automotive ethernet switches.

Goudswaard, J.C. (2019) Switching ripple reduction in a class-D amplifier using a MOSFET in series with the filter capacitor.

Graaf, A.J.M. de (2020) OMNI: Distributed tangibles for balanced gameplay including visually impaired people.

Graaf, T. de (2024) Power Quality Monitoring and Data Collection : High frequency analysis of line voltage.

Graat, J.J. (2018) Energy-based control of an underactuated quadrotor using a geometrical spring-damper approach.

Grift, Rasmus E. van der (2019) Item availability restricted.

Grimm, Sander (2020) Design of a 3D imaging system for psoriasis assesment.

Grinten, B. van der (2013) A step in the right direction : modelling and analysis of a robotic leg with an energy storage system.

Grinten, B.A. van der (2015) Port based Hamiltonian modelling of flapping wing aeroelasticity using vacuum chamber and wind tunnel measurements.

Groen, M.C. (2018) Assessing the Effect of Smart Reinforcement Alternatives on the Expected Asset Lifetime of Low Voltage Networks.

Groen, R.R.A. (2020) Applying Artificial Intelligence on an Integrated Pressure and Mass Flow Sensor.

Groenesteijn, J. (2010) MEMS-based step-up voltage conversion for comb-drive actuation.

Groeneveld, D.J.A. (2010) Bandwidth extension and noise cancelling for TIAs : wwo new common source TIA implementations.

Groenland, A.W. (2006) Degradation processes of platinum thin films on a silicon nitride surface.

Groenland, A.W. (2006) Hot tips for chemistry : development of a carbon nanotube based field emitter array for plasma chemistry on chip.

Groot, A.G. de (2019) Confidence driven control for autonomous robotic 3D ultrasound acquisition of the breast.

Groot, E.J. de (2018) Development and testing of control meters used to test electromagnetic interference on static energy meters.

Groot Wassink, W.G.J. (2016) Combining filters and self-interference cancellation for mixer-first receivers in Full Duplex and Frequency-Division Duplex transceiver systems.

Groothuis, Marchel (2004) Distributed HIL simulation for Boderc.

Grootjans, R. (2016) Design of an Astronomy Front End for Orbiting Low Frequency Antennas for Radio Astronomy.

Grootte Bromhaar, M.J. (2022) Proposed design of a micro-inverter for an integrated photovoltaic-battery module in grid and off-grid applications.

Grootte Bromhaar, M.J. (2024) Selective Harmonic Elimination and Model Predictive Control in Motor Drives Application for Electromagnetic Excited Noise Mitigation.

Gunneweg, Freddy (2015) Measurement of network activity in acute slices of the healthy and parkinsonian striatum on microelectrode arrays.

Guo, Xiaohu (2005) Design and realization of a one-dimensional vibration isolation setup for floor vibrations.

Gutierrez Perez, V. (2009) Power signal measurements.

Gün, Harun (2024) Effect of Irradiation on Transmission Line Method Measurements on Silicon Solar Cells.

Haak, W.T. (2024) Design of a Tapered Slot Antenna Array with Active Scan Loss Optimization.

Haak, WT (2021) UAV Mobility Detection Using Radio Channel Properties for Collision Avoidance in Air Corridor.

Haarman, T.R. (2020) Analysing countermeasures against fault injection attacks on FPGA based cryptographic implementations.

Haarman, T.R. (2023) FPGA integration for data processing of quantum transport measurements.

Haddad, Ragheed (2021) Item availability restricted.

Hagos, Ambesagir S. (2010) Geocasting solution for bluewave services in the context of vehicular communications.

Hakim, V.S. El (2015) Implementation and Analysis of Real-time Object Tracking on the Starburst MPSoC.

Hakkenberg, Chiel (2016) Experimental evaluation of LoRa(WAN) in indoor and outdoor environments.

Halmingh, Q. (2023) Effect of cycles of electrical stimulation on the contractile performance of engineered heart tissue using human-induced pluripotent stem cell-derived cardiomyocytes.

Hamstra, Mathijs (2021) Realizing DC Electric Metamaterials Through Fused Deposition Modelling.

Harbers, J.R. (2024) Design of an Electric Circuit using Thin Film Transistors and Fuel Cells to Generate a Magnetic Moment.

Harbers, Job (2024) Characterization and modeling of a thermal conductivity sensor for liquids.

Hardeveld, E. (2018) Item availability restricted.

Harmsen, Ruud (2015) Specifying the WaveCore in CλaSH.

Hartman, T.H.F. (2016) Inter-Symbol Interference Prevention techniques for Noise-based Frequency Offset Transmit-reference Systems.

Hartman, T.H.F. (2018) Improvement of Digital Signal Processing for Multichannel TDEMI Measurements.

Hatakeda, Joel Benavides (2022) Epoxy-ceramic based NTC temperature sensors for improved humidity stability and low curing temperatures.

Have, B. ten (2018) Control meter for static energy meters used to validate the readings in cases of EMI issues.

Haven, H. (2020) Submodel-aware testing.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Havinga, Thijs (2019) Embedded Infrastructure for Decentralized Energy Management.

Havinga, Thijs (2021) MmWave Beam Control for Geocasting in Vehicular Networks.

Heddema, Reinder (2024) Comparative Analysis of Energy Storages and Reversible Substations for Braking Energy Recovery in Different Traffic Scenarios.

Heerdt, Niels ter (2023) Load transportation with an elastic cable: Modeling and control.

Heeres, R.W. (2020) Item availability restricted.

Hegeman, Thomas (2022) Significance of Non-Persistence on Waveform Parameters of Non-Linear Loads.

Heide, Hans van der (2021) Synthesis and classification of ghost fingerprints.

Heijdens, R.H.M. (2019) Design of a mastitis indicator sensor.

Heinen, G. (2003) Turbo Multiuser Detection Architectures.

Heinsius, L.R. (2021) Real-Time YOLOv4 FPGA Design with Catapult High-Level Synthesis.

Hemert, T. van (2009) On the modeling and simulation of novel schottky based silicon rectifiers.

Hendriks, J.P.A. (2001) Realization of Tool Support for CSP Diagrams and Generation of Concurrent Java Software.

Hendrix, J.M. (2018) Impedimetric analysis of the activity of single fluid cracking catalyst particles.

Hertog, H. den (2020) Bitstream Manipulation to Support Relocation and LUT Adaptation.

Hertog, H. den (2023) Item availability restricted.

Heus, L.E. de (2018) Hydrogel-based 3D semi-circular microvascular bbb-on-chip with integrated sensors for barrier assessment through TEER measurements.

Heusden, A.J. van (2011) Automatic Gain Control ADC based on signal statistics for a cognitive radio cross-correlation spectrum analyzer.

Hidayat, Zulkifli (2004) Comparison of Learning Methods in the Learning Feed-forward Control Setting.

Hillerström, F.H.J. (2016) Deep verification learning.

Hirtum, M.A. van (2012) Balance and step responses with an impaired ankle torque.

Hobert, E.C. (2020) Integrating Energy Awareness into Sequence Control.

Hoek, W.A. (2018) Item availability restricted.

Hoekstra, K. (2018) On the realization of a smart grid demo-site at Coteq in Almelo.

Hoen, T.J. (2019) Item availability restricted.

Hoen, T.J. (2019) Item availability restricted.

Hoesel, L.F.W. (2002) Design and Implementation of a Software Defined HiperLAN/2 Physical Layer Model for Simulation Purposes.

Hoeven, S. (2022) Simplified trench-assisted surface channel technology for high-temperature microfluidics.

Hoeven, S. van der (2019) Miniaturization and Characterization of a Ruthenium Oxide Potentiometric pH Sensor for Organs-on-Chip purposes.

Hof, J. J. van 't (2016) Design improvement and prototyping of a Testbed for the Calibration and RFI Mitigation Algorithms used in OLFAR.

Hoff, Joost van der (2015) Transport through single-acceptor transistors in Silicon.

Hoffmann, M. (2024) Item availability restricted.

Hofstede, A. (2017) On design and realisation of a telemanipulation demonstration setup.

Hofstra, Silke (2016) AMR correction in an FPGA.

Hofstra, Silke (2018) Automated analysis and simulation of control systems using dataflow.

Hoftijzer, D.M. (2019) From prototyping code to standalone running code using ROS.

Hogenkamp, Tom (2019) Framework for Fine-Grained Partial Reconfiguration on FPGAs.

Holm, L. (2021) Exploratory Research Into Accurate And Consistent Resistivity Measurements Of Highly-doped Silicon At High Temperatures.

Holm, L. (2024) Realization of a Low Cost Multi-Axis Micromachined Force Sensing System.

Holtland, C.T. (2024) Developing Interactive, Educational Material on Deep Learning.

Hooft, Allard van der (2024) Development of an intelligent multi-sensor system for real-time monitoring and analysis of soil pollution on construction sites.

Hoogendijk Abril, Javier (2024) Online Battery State of Health Estimation Method using an H-Bridge and Bi-Directional Converter Circuit.

Hooijberg, Jelle (2023) Exploring the use of a transmission line in the design of a temperature stable frequency reference.

Hoorweg, H.J. (2021) Utilizing high level synthesis to accelerate pattern detection for positive selection based on linkage disequilibrium.

Hopfenspirger, A.M. (2021) Designing a haptic wearable for people with visual impairment to aid navigation.

Hori, Rentaro (2018) Darwin on a chip : think outside of logic.

Horsman, J.C. (2015) The influence of Wi-Fi on the operation of Bluetooth based wireless sensor networks in the Internet of Things.

Horst, L. van der (2023) Saving energy in cellular networks through resource sharing.

Horst, Oliver (2018) Development of a smart healthcare tracking system : for the hip fracture rehabilitation process.

Houwelingen, Fabian van (2006) Frequency division.

Hu, Dennis (2022) Self Healing MOSFETs: Investigation into the Time Dependency of Recovery in the High-κ dielectric HfO2.

Huggers, T.J.P. (2022) Exploring the potential of Reinforcement Learning-based adaptive control to the artificial pancreas developed by Inreda Diabetics B.V.

Huggers, T.J.P. (2024) Finite Element Method Modeling of Functionally Selective Peripheral Nerve Stimulation of an in silico Myelinated Nerve Fiber Model.

Huiden, J.E. (2023) Item availability restricted.

Huijgen, Mark (2005) Patterns for dependable and distributed embedded control.

Huisman, Sietze (2024) An demonstration device for electrical engineering.

Hulman, T. (2018) Item availability restricted.

Humblot-Renaux, G. (2018) Implementation of HDR for image acquisition on a finger vein scanner.

Hummel, F van (2018) Design of a 360 degree obstacle detection system with haptic feedback.

Hummel, F. van (2021) Item availability restricted.

IJzereef, R.M.M. (2020) Item availability restricted.

Iakovou, Dimitrios (2003) Recognition of Structures in Numerical Data.

Indrawijaya, K.R. (2019) Self-management Rehabilitation Capabilities on Older Adults by Persuasive Technology.

Isrie, S.V (2018) Measuring, logging, and visualizing pulsed electromagnetic fields combined with GPS location information in augmented reality.

Italiaander, R.W.C. (2021) The Pressure Dependency of a Micro Coriolis Mass Flow Sensor.

Jager, J (2017) Joint level modelling, characterisation and torque control of the SHERPA robotic arm.

Jaladi, H.S.V.C. van (2021) 3D Printed electrically controlled pneumatic switch.

Janbroers, J.M. (2019) Developing an MR safe calibration and interface module for pneumatic stepper motors.

Janbroers, Jamie (2024) Experimental study concerning the interplay between gear ratio and field weakening for maximizing explosive motion of a jumping leg.

Jansen, B.J. (2023) Modelling the dynamic greenhouse gas emission intensity of the Dutch electricity grid.

Jansen, Bas (2003) Service profiling in business to business web services.

Jansen van Rosendaal, J.B. (2017) A context aware dynamic lighting system for the SmartXp.

Janssen, Oskar (2008) Wifi interface for mobile robots.

Janssen, Oskar (2009) A finite difference time domain model of an eddy current based measurement system.

Janssen, S.L. (2012) Image-guided control of a continuum robot.

Jellema, J.M. (2019) Polynomial Calculation of Quasi-Gray code labelings for Irregular Signal Constellations.

Jeulink, Kevin (2020) Smart sports exercises project : the detection of (in)correct motion during resistance training.

Jeunink, S.P.P. (2017) Electromagnetic sources in the hospital environment : risks analysis and measures for electro-magnetic compatibility (EMC).

Jin, Xiaopeng (2014) Implementation of the MUSIC Algorithm in CλaSH.

Jong, B.Z. de (2024) Assessing changes in EEG functional connectivity after dual-site transcranial Alternating Current Stimulation for varied phase lags.

Jong, C.S. de (2022) Incremental capacity analysis on module level li-ion batteries for echelon utilization.

Jong, Gerdo (2005) Dual stage actuation in linear drive systems.

Jong, H. de (2024) Finger Vein Pattern Recognition Using a Contact Sensor.

Jong, H.W. de (2010) Two-dimensional coding and detection for data storage on patterned media.

Jong, M. de (2022) Selective pick-up and placement of single cells.

Jong, R.J. de (2019) Range characterization of backscatter Wireless Sensor Networks.

Jong, S. de (2020) Arduino toolkit for the control of pneumatically actuated wearables.

Jongsma, T.M. (2010) Connecting Æthereal to the Montium.

Jonkers, H.R. (2019) Advanced internal combustion engine sensor analysis by means of modelling and real-time measurement.

Jonkers, H.R. (2022) 3D Printed Electronics.

Jonkman, RB (2022) GaN Based Higher Power Inductive Transfer System for E-bikes.

Jonkman, Remi (2017) Implementation of a reliable 2D approximator using sonar.

Jordens, M. (2020) A low power highly accurate Bandgap temperature sensor.

Julsing, B.K. (2009) Phenomenological modeling of the human tongue and lips.

Just, E.N.J. de (2023) Characterizing a spring-based inductance sensor and investigating external object interference.

Kalverboer, J. (2012) Active noise reduction in double-panel structures : decentralized adaptive feedforward control.

Kamaci, Tolga (2020) The possibilities, benefits, and disadvantages of a collective energy management system of cultural squares as an example of climate-neutral urban areas in line with the Clean Energy for all Europeans package.

Kamermans, D.V. (2017) Inspection of underground water pipes with use of a laser profiling sensor and offline processing.

Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.

Kamp, R. (2018) Design of a mechanical-based thrust sensing unit for multi-rotor UAVs.

Kamphuis, Gertjan (2014) Adding Quality of Service to Disruption Tolerant Networking using the ORWAR routing protocol for use in military MANETs.

Kamphuis, Job (2005) Variable batch sizes for Learning Feed Forward Control using Key Sample Machines.

Kampman, T.E. (2018) Nabaztag lives: the rebirth of a bunny : an exploration of the Nabaztag as a social robot in a domestic environment.

Kanters, N.B. (2016) Head Pose And Light Source Estimation On Low Resolution Facial Images Using A Texture Based Approach.

Kanters, N.B. (2020) Direction-of-arrival estimation of an unknown number of signals using a machine learning framework.

Kapoor, A. (2005) A Reconfigurable Architecture of Software-Defined-Radio for Wireless Local Area Networks.

Kapoor, R. (2023) Breathe : development and design of a wearable for resonant breathing coaching with tactile feedback.

Kappert, S. (2023) Development of a Silicone 3D Printing Process Enabling Embedded Sensors for Soft Robotic Applications.

Kaptein, J.A. (2020) Gold nanoparticles for biosensing.

Kaptein, J.A. (2023) Design and Fabrication of a Microfluidic Check Valve for Interation into an Intravaginal Ring for Diagnostics and Drug release.

Karampatsos, Ilias (2014) Successful Communication Over a Wireless Link Under the Presence of Other Users.

Karapetian, Armen (2007) Automobile tire profile measurement.

Karavidas, A. (2016) Light Emission Measurements on Diodes.

Kareem, J. (2022) Hall effect and field-effect measurements of tin telluride nanowire devices for novel topological quantum computation.

Kareem, Jonas (2024) Fabrication and electrical characterisation of hexagonal GeSi nanowire devices.

Karlović, Fran (2024) Developing a Wearable Sensor Network for Air Pollution Monitoring on Construction Sites.

Kas, Gerrit (2021) Item availability restricted.

Kaspers, R. (2011) Using a time-of-flight camera for autonomous indoor navigation.

Keizer, A.A. (2021) The Effect of Thermal Annealing on Stress-Induced Leakage Current in Gate Oxides.

Keizer, A.A. (2023) Item availability restricted.

Keken, R.M. van (2013) Real-Time environmental impedance estimation using a variable stiffness actuator as a variable stiffness sensor.

Keller, Kristian M.Sc. (2016) A day ahead electricity storage flexibility prediction for peak shaving.

Kempenaar, J.J. (2014) Communication Component for Multiplatform Distribution of Control Algorithms.

Kemper, Puck (2020) Engineering a chloroplast movement sensor.

Kemény, Ádám István (2017) Child Loss Prevention: A WiFi based assistant in a predetermined domain.

Kerimov, Emil (2020) FPGA-based AES variants against side-channel attacks.

Kerkhof, Daan (2023) We Can "Hear" You With Radar.

Kerkhof, T.R. (2013) Control strategy for variable stiffness actuators in belateral teleimpedance interaction tasks.

Kers, Richard Jacob (2018) Low Energy Multi-Hop Mesh Network for Nomadic Localisation Sensors: On the Design, Development and Deployment.

Kers, T (2018) Household occupancy detection for burglary purposes : Risk assessment and effectivity analysis of an unobtrusive, easy-to-implement countermeasure against Wi-Fi tracking.

Kersjes, R.H. (2023) Dual-DC-port Inverter for a Fuel Cell Electric Aircraft.

Kersjes, Rutger (2021) Optimizing differential impedance flow cytometry to assess the calcificationstate of calcifying algae.

Kessel, L.J. van (2017) A desk light to improve working attitude.

Ketelaar, J.G. (2012) Controller design for a bipedal robot with variable stiffness actuators.

Ketelaar, M.M. (2024) Making Power Quality Monitoring more accessible, by emulating grid behavior and creating a tool to visualize power quality data.

Keuning, J. (2011) Image-based magnetic control of Microparticles.

Khoirunnisa, Elvin (2024) A Reference Model of Operation and Maintenance (O&M) Strategies for Community-based Photovoltaic (PV) Microgrids on Small Islands.

Kienhuis, J.B.J. (2024) The Effects of the Distribution of Energy Storage Systems in Dutch Low-Voltage Grids.

Kingma, P.J. (2022) Performance of Smith-Waterman DNA sequence matching on a FPGA.

Kivits, M.P.W. (2018) Constructing a Convolutional Neural Network for Semantic Segmentation of Skin Lesions using a Small Dataset.

Kivits, Max P.W. (2021) Heterogeneous cooperative target tracking using Nonlinear Model Predictive Control.

Klaric, Jana (2024) Design, realization and evaluation of a side illumination finger vein patter capturing device.

Kleijn, T.F.C.L. de (2019) Improving the Sensors course with a sensor shield.

Klein Essink, Jeroen (2018) Electrical conductivity effects in ultra-thin Tungsten films.

Klein Gunnewiek, S (2022) Item availability restricted.

Kleinsman, E.J.E. (2013) Modelling local field potentials in the subthalamic nucleus.

Kleinsmann, E.M. (2013) Design of an RF receiver in BiCMOS implementing beamforming to reject interference.

Kloezeman, T. (2021) Item availability restricted.

Klute, L. R. W. (2021) Space-time Trade-off in Clash: Improving Smart Machines.

Klute, L.R.W. (2017) Assisting breast biopsy by visualizing the inside structures of a patient on top of the patient in real time using the HoloLens.

Kluwer, Taco (2001) Development of a test-bed for smart antennas, using digital beamforming.

Knijff, H.H.R. (2024) Distortion mechanisms in 1-bit Sigma-Delta modulators.

Knol, E.J. (2018) Analyzing and reducing switching frequency ripple of class D amplifiers by active filtering.

Koenders, M.J.M. (2010) Field emission and stability.

Koenders, P.A.J. (2002) On the relation between equation formulation of constrained systems and implicit numerical integration and optimization.

Kok, Frank (2020) Towards E-mode AlGaN/GaN HEMTs with ferroelectrics.

Kok, K.J. (2016) TERRA support for architecture modeling.

Kolkman, S.Y. (2022) Design, fabrication and evaluation of a 3D printed soft robotic actuator with embedded sensing.

Konuk, Ali Riza (2004) Development and Implementation of Compliant Controller On Manus Robot Arm.

Kooij, D. (2018) Radio frequency impedance matching for SAW devices on zinc oxide and lithium niobate.

Kooijman, Lucas Johannes (2019) Low voltage high performance silicon nitride EOF pump.

Koomen, R.P.J. (2020) Evaluation of rapid development of embedded control software for cyber-physical systems with feature-based development cycles.

Kopinsky, Joël J. (2019) The design of an economic electric motorbike for urban commuting in the Netherlands : describing a design method that implements axiomatic design and is tailored to overcome the challenges of electrc motorbike design.

Kortier, H. (2010) Assessment of daily-life dynamic interactions between human body and environment using movement and force sensing on the interface.

Koster, M.J. (2011) µFlow : A compact fluorescence detection system that uses a DVD pickup for the optical detection of beads.

Koster, Pieter A.J.M. (2011) High IMFDR3 Switched-Capacitor Amplifier design in CMOS 65nm.

Kosters, Jelmer Bas (2017) A TDC-assisted SAR ADC.

Kotte, A.W (2022) Motivating The Unmotivated: Older Adults and Physical Activity.

Krapukhin, Alexander (2019) Approximate Least Squares Accelerator.

Kriele, M.A. (2018) Noise-based Frequency Offset Modulation Simulation Model Design : For the analysis of Transmit-Reference Medium Access Control in Multiple Access Ad-hoc Wireless Sensor Networks.

Krist, J.O. (2014) The effect of residential storage and conrrol on the distribution net compared to central storage and control.

Krone, Mark (2021) Item availability restricted.

Kruiff, K.T. de (2023) Concurrent haptic feedback for improving the body balance of front and back crawl swimming.

Kruiper, T.R. (2019) Optimizing FPGA Designs for Maximum Throughput using RapidWright.

Kruiper, T.R. (2023) Area-Optimized RISC-V-Based Control System for 22nm FDSOI Analog and Mixed-Signal Test Chips.

Kräwinkel, R.W. (2020) The effect of writing and transmitting SD card data on the consistency of SD card write performance.

Kräwinkel, R.W. (2022) Influence of control and output-quality constraints on the scalability and optimization of multi-branch multi-level flying capacitor converters.

Kubal, Shaunak (2024) Analysing Performance Bounds for Direction of Arrival Based Localisation from Quantised Samples.

Kuijper, Guido (2017) Robust estimation of biometric data.

Kuiper, Guus (2013) Guaranteed-throughput improvement techniques for connectionless ring networks.

Kuipers, F.P. (2017) FPGA design support using CλaSH and LUNA.

Kühlkamp, Wouter and Leemeijer, Bram (2015) Concentration and scan rate dependent electrochemical measurements using a floating electrode.

Laagland, Hidde (2024) Time-Division-Multiplexing for AIS on VHF Radio.

Laan, J.J. (2023) Electricity grid congestion and application of a novel tariff in the Netherlands.

Labordus, N. (2024) Item availability restricted.

Lacina, F.R. (2023) Supercapacitor technologies to improve the power quality in dc microgrids.

Laerhoven, B.J.A. van (2019) Modelling and characterisation of a pressure sensor implemented insurface channel technology.

Laerhoven, B.J.A. van (2021) Implementation of silicon nitride isolation trenches in SOI MEMS accelerometers.

Lammertink, Tijs (2005) Power-port modelling of an in-plane 3 DOF parallel micro-manipulator with feed-forward position control.

Lammertink, Tijs (2003) Joystick Controller for JIWY.

Landman, E. (2016) Test of Rig for the Robird.

Lange, Nick van (2018) Robot platform positioning in a theater setting.

Langerak, N.C. (2021) Towards real-time endoscopic verification of lung lesion by bio-impedance measurements to improve biopsy accuracy.

Lazareanu, R. (2021) Item availability restricted.

Leersum, Tycho van (2021) Characterization Method Using Square Wave Signals for Testing Current Transducer Responses.

Leersum, Tycho van (2024) Analysis of Emitted Electromagnetic Interference of DC Electric Vehicle Supply Equipment.

Leeuw, N. de (2022) Design and characterization of LC resonators for RF reflectometry charge readout of quantum dots.

Leeuwen, P. van (2020) FPGA-on-FPGA emulation using subgraph homeomorphism.

Leferink, F.B.J. (1992) Preventing electromagnetic interference form integrated circyits and printed circuit boards using computer simulation.

Leijen, Niels (2018) Low-cost silicon-based resistive load cell suitable for asymmetric loads.

Lenssen, J.A. (2019) Towards a steerable multi-module soft robotic endoscope for NOTES applications.

Li, C. (2023) Catheter modelling and force estimation in endovascular application.

Li, C.H. (2009) Quadrature power amplifier for RF applications.

Li, L. (2022) Design of A MATLAB Based Droplet Auto Counting and Analyzing Program.

Li, Liang (2014) Embedded Data Compression for Automotive FMCW Radar System.

Liakopoulou, Akrivi (2019) Analysis of short-circuit transients in the LHC main dipole circuit and development of an automated analysis algorithm.

Lieftink, R.J. (2017) Design of an anti-slip control system of a Segway RMP 50 omni platform.

Lieftink, R.J. (2020) Bi-directional impedance reflection for Cartesian space telemanipulation control to reduce the effect of time delay.

Limandibrata, Clement (2021) Determining the State of Charge and the State of Health of a Battery Pack.

Lin, S.L. (2021) Reconstructing object shape from impedance measurements in a known microfluidic channel geometry.

Lin, Shing Long (2018) Optimization for approximate softcore unsigned multipliers on ALtera FPGA's.

Lio, Ron (2020) Item availability restricted.

Liu, Xiaochen (2021) Multipath-Assisted On-Body Tag Localization.

Liu, Yu (2005) Benchmarking of the Key Sample Machine.

Logmans, D.D. (2024) Limiting Kinetic Energy through Control Barrier Functions : Analysis and Experimental Validation.

Logtenberg, Sander W. (2013) Ultra-thin PbTiO3 films : thickness and ferroelectricity.

Lohuis, R. (2020) Item availability restricted.

Lohuis, Robin (2016) Load Estimation by Waveform Harmonics in Class-E RF Power Amplifiers.

Lomillos Rozeboom, I. (2020) Beamforming performance evaluation with impact of user model electric properties.

Loo, Rick van (2018) Increasing Throughput of FPGA-based Streaming Applications : by using Pipelining.

Loon, Sebastiaan van (2005) Modeling and gait control of a quadruped robot.

Loos, C (2022) Item availability restricted.

Loos, Cisko (2017) Analysis and optimization of an RF baseband transimpedance amplifier with low-pass filter structure and positive feedback.

Lopez, A. (2023) Low-Latency GFSK Demodulation Architecture Comparison and Design for FPGA.

Louw, S.J.A. de (2017) Control Surface Waves by Modifying Surface Properties of a Microstrip Patch Antenna Array.

Lukassen, C.M.A. (2020) Developing a set up for monitoring cycling performance of patients with CVA with an electric tricycle.

Lübbermann, Thijs (2021) Design and control of a magnet placement tool.

MEULMAN, G.R. (2015) The radio frequency interference environment behind the moon between 0.3 - 30 MHz.

Ma, Song (2013) Feasibility study of frequency doubling using an anxor-gate method.

Maan, B. (2010) Comparison of methods for quantitative analysis of dynamic susceptibility contrast enhanced brain perfusion MRI.

Maan, G.C. (2021) Analysing Cooperative Awareness Message generation around intersections based on macroscopic traffic parameters.

Maan, G.C. (2024) Gossip-based Communication for Distributed Energy Management.

Maas, Jelle (2020) Cyber attack detection in smart grids.

Maas, T.J. (2023) Qualitative comparison of State of Charge prediction models for battery energy storage systems.

Macarie, M. (2020) DNS bitsquatting in the wild.

Mahrof, Dlovan Hoshiar (2008) Design of a fully integrated RF transceiver using noise modulation.

Mammadli, Fidan (2019) Cold pressor induced pain modulation by the activation of diffuse noxious inhibitoty control for validation of diagnostic tools for early detection of chronic pain.

Mamundur Raman, Nivedha (2021) Impact of the orientation of electrodes on ire parameters.

Mamuzic, Ms. Monica (2024) Gamification en voedingsproblemen: effecten op motivatie, betrokkenheid en gedragsveranderingen.

Manen, B.T. van (2021) Learning to explore and map with EKF SLAM and RL.

Manikandan, Aiswarya Lakshmi (2024) Investigating the feasibility of PEMFCs for powering autonomous devices.

Manterola, Nahuel (2017) Creating 3D images for facial recognition using the RealSense SR300.

Manterola, ir. Nahuel (2021) Evaluating the feasibility and effectiveness of multi-perspective stereoscopy for 3D face reconstruction.

Maqueda Mateos, Alba (2020) Energy optimization of a grid-connected village under the Dutch local energy community context.

Marnette, Thijs (2017) Item availability restricted.

Marsman, G.H. (2013) Exploring magnetic self-assembly by studying the influence of shape on interactions of centimeter size particles.

Mast, M.H. van (2021) Low Pass Filtering to Improve Robustness in Energy Measurements that Utilize Rogowski Coils.

Mast, M.H. van (2024) Hybrid EMI Filter for Common Mode Noise Reduction at VSI output.

Mathur, Nehal (2020) Novel design of MR-compatible pneumatic soft-surgical endoscope with variable stiffness.

Matthews, Dominic (2024) DIY Adaptive Gaming : Game Control for People with Upper Limb Disabilities.

Maurik, Louis van (2023) Creating a physicalization showcasing the innovative heat network and energy grid of the new business park on Urk.

Meciani, Giovanni (2018) Implementation of a power-efficient DFT based demodulator for BFSK.

Meer, A.J.M. van der (2016) Mapping the underworld.

Meer, O.R.C. van der (2017) Time-frequency analysis of electrical brain responses to nociceptive stimulation.

Meer, Olaf van der (2020) Item availability restricted.

Meijer, R.J. (2020) Simulating the quantum transport properties of a single atom transistor in silicon.

Meijer, R.J. (2023) Exploratory study on complex oxide-based (ferroelectric) floating-gate field-effect transistors for neuromorphic computing applications.

Meijer, S.D. (2018) The implementation of collision avoiding haptic feedback in the pedal-based control of a robotic platform.

Meijering, R. (2018) Vision-based control of the SHERPA arm.

Meijerink, B.N.E. (2024) A Needle Guidance System Employing Ultrasound Region Tracking For Precision Biopsy Procedures.

Meijers, J.P. (2024) Temperature dependencies in CMOS capacitors.

Meijers, R. (2022) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Mema, Florian (2018) The UTB Electron-Hole Bilayer LED.

Mennink, T. (2010) Self localization of PIRATE inside a partially structured environment.

Mensink, D.J.G. (2024) Input Signal Power Reduction Techniques in Successive Approximation Register ADCs.

Mentink, R.J.T. (2019) Performance improvement of a common mode EMI-filter.

Mentink, R.J.T. (2021) Item availability restricted.

Meuleman, Jelmer D. (2024) Exploring Nonlinear Dynamics : in Al₂O₃ Integrated Photonic Devices.

Meuleman, Jelmer David (2022) Automated 120° MMI Based Downconverter Design.

Meulman, ir. G.R. (2020) A 2-layer 45 degree Slanted Phased Array Antenna with Baffles for 5G mmWave Applications Based on Gap Waveguide Technology.

Meutstege, Esken (2014) Micro-valve with in-plane fluidics using surface channel technology on SOI wafer for use with micro-Coriolis sensor.

Minnema, Jeroen (2020) Towards component-based, sensor-independent and back-end independent SLAM.

Minnen, Matthijs van (2018) Analysis and Rerouting of Nets for Partial Reconfigurable FPGA Designs using RapidSmith2.

Minnen, Matthijs van (2022) CNN Accelerator Throughput Improvement using High-Level Synthesis for FPGA.

Mirwani, Yash (2020) Redesign of the PIRATE robot.

Mishra, Nishant (2021) Design and fabrication of an ultrafast expanding microbubble valve array for use in a microreactor to measure sub millisecond reaction kinetics.

Mocioiu, V. (2012) Automatic classification between active brain state vs. rest state in healthy subjects and stroke patients.

Mocking, Ceriel (2006) Optimal design and strategy for the SolUTra.

Mohamed Refai, M.I. (2017) Pressure Insoles for Gait and Balance Estimation.

Mol, G. (2023) Developing a platform for the KUKA iDo social robot.

Molen, R.M. van der (2020) Item availability restricted.

Moonen, D.J.G. (2014) Implementation of a Distributed Correlator for Astronomical applications.

Moonen, Niek (2012) An automated David laser scanner for facial acquisition.

Morales Ortega, Luis Rodrigoandrés (2023) A Digital Twin for Ground Water Table Monitoring.

Mortezavi Matin, Kiavash (2017) Exploiting FPGA on RaMstix for vision applications.

Moseley, N.A. (2004) Radio Resource Discovery for Ad-hoc Wireless Networking.

Motheram, Manaswini (2023) Force-based measurement of tissue stiffness in 1-DOF needle insertion robotic device for liver interventions.

Moujaly, Matheas (2023) Item availability restricted.

Mourik, L.C. van (2002) Design & Implementation of Digital Channel Selection Filters for a Combined Bluetooth and Hiperlan/2 Receiver.

Mukhtar Ahmad, Waqam H.R.A. (2021) Item availability restricted.

Mukhtar Ahmad, Wasam R.A. (2021) Item availability restricted.

Müller, K. (2022) Electromagnetic interference on static meters when combining linear and non-linear loads.

Nadgere, Nimish B. (2020) Haptic Rendering/Control for Underactuated QB SoftHand using Haption HGlove.

Nandi, S (2020) Reduction in Controlled Degrees of Freedom for a Cable Driven Variable Stiffness Actuator.

Naoom, Salem (2021) Meissner oscillator and its temperature dependency from -50 to 170°C.

Nass, M. (2018) Finding intelligence in disordered boron dopant atoms.

Nateshan, A.V. (2020) Investigating the application of inductive wireless power transfer in real-world drone charging.

Nateshan, Anand Vaidya (2022) Design and Development of a Wide Input Voltage-Wide Load Range Multi-MHz DC-DC Converter.

Ndeh de Mbah, Eitel Yvan (2021) Morphed Image Detection using Local Spectrum Analysis.

Ndeze, L.B. (2024) Item availability restricted.

Nee, F.D. van (2014) To a new hardware design methodology : a case study of the cochlea model.

Nelissen, L.P.M. (2021) Development of Gazebo-based high-fidelity simulation environment for morphing-wing UAVs.

Nibbelke, Vincent (2014) Vascular pattern recognition for finger veins using biometric graph matching.

Niehoff, Dennis (2018) Evaluation of Motion Control Algorithms for Miniaturized Agents Moving Inside 3D Fluidic Microchannels.

Nieuwenhuis, S. (2019) Modelling of Laser Attack Fault Injections on Field Programmable Gate Arrays.

Nieuwenhuis, S. (2022) Exploring the Implementation of Network Architecture Search (NAS) for TinyML Applications.

Nijenhuis, B.G. (2024) Leveraging 5G NR-U Bandwidth Parts in Coexistence with Wi-Fi.

Nijenhuis, W.J.G. (2020) The resistive-pulse technique as a method for determining spermatozoa morphology.

Nijhof, S.F.J. (2018) Teleoperation using passive control and LUNA network channels.

Nijhuis, F. (2022) EX-Situ Heart Validator : Novel system for testing the donor heart prior to transplantation.

Nijhuis, J.W. (2019) A radio-activated desktop mouse using Walabot UWB radar.

Nijhuis, J.W. (2021) Modeling, Characterizing and Evaluating the Wireless Link of the Patient Health Monitor.

Nijhuis, W.H. (2022) An audio based feature detector for shavers using Artificial Intelligence.

Noorlander, M.S. (2024) TrackScorer : Skyrmion Logic-In-Memory Accelerator for Document Ranking.

Noort, Luc van (2024) Sensor Framework For Pediatric Cerebral Palsy Ankle Foot Orthosis : Development and Technical Validation.

Noshahri, H. (2016) Reducing fuel consumption for Trailing Suction Hopper Dredgers using automatic steering.

Notenboom, T. (2017) Using Technology to Recognise Emotions in Autistic People.

Oberhofer, L. (2022) Item availability restricted.

Oedzes, J.M. (2018) Approximate signed multipliers for multiply-accumulate circuits.

Oedzes, J.M. (2020) ASIP design and algorithm implementation for beamforming in an antenna array.

Okken, B. (2017) Design and Empirical study of tilting propellers of an over-actuated quadrotor.

Olieman, Erik (2010) Charge steered RF PA.

Omtzigt, C.E.S. (2022) Developing a modular gaming handheld for gamers with muscular dystrophy.

Oort, Gijs van (2005) Strategies for stabilizing a 3D dynamically walking robot.

Oortgiesen, R. (2010) Feasability study of frequency doubling using a dual-edge method.

Oosterkamp, J. (2015) Creating a toolkit for human-robot interaction.

Oosterveld, D.M. (2022) Item availability restricted.

Oosterveld, R.N. (2022) Radiofrequency Safety of External Defibrillation Electrodes at 1.5T.

Oostewechel, P.S. (2016) Improving the linearity of a single stage boost converter audio amplifier.

Oprel, Jens (2021) Modeling, design and characterization of a 3D-printed capacitive shear stress sensor.

Oprel, Jens (2024) Hybrid Integrator Gain System as a Controller for Infinite Dimensional Systems.

Oprel, Jens (2024) Hybrid Integrator Gain System as a Controller for Infinite Dimensional Systems.

Otto, M. (2005) Mechatronic setup for Boderc project.

Oudshoorn, Luuk (2016) The theory and practice of probabilistic CMOS.

Overbeek, L.M (2015) Controller design for a rail mounted inspection robot manipulator.

Overeem, W.T. (2020) Item availability restricted.

Overeem, W.T. (2022) Item availability restricted.

Palani, Vignesh (2023) Design and Development of Variable Impedance Actuator using a Multi Axis Motor.

Panambur Venkatraman, V. (2019) A sensor fusion technique for head motion controlled endoscope camera system.

Pantelis, D. (2019) Design of a control strategy for a robotically assisted ultrasound guided biopsy.

Pap, M.G. (2011) Wobbe meter : A calorific measurement system on chip.

Pawirotaroeno, Rezfan (2020) Development of a Social Robot Toolkit for Co-Design and Prototyping.

Peeters, D.W.M. (2022) Physicalization of dynamic, physiological data.

Pendavingh, D.J. (2017) Non-destructive dynamic motor characterization setup.

Perera, Navoda (2020) An API for intelligent deployment of numerical calculations.

Peters, Elmar (2020) Parasitic resonant tuning for zero switch node ringing in power converters.

Peters, V. (2012) Analysis and design of a low power ADC.

Pieper, Peter (2005) Fast dynamic-model based weight measurement.

Pinto, D. (2024) Investigating the Effects of Changing the Optimization Order in Profile Steering.

Pistorius, N. (2020) Acousto-mechanical imaging with 3D printed ultrasound probe extension.

Pistorius, N. (2022) A study into kinematics and dynamics of tail-supported climbing in birds and robotics.

Pit, K.J.H. (2024) Motor Angle Determination in Interior Permanent Magnet Machines for Low-Speed Control Using High-Frequency Injection.

Pit, BSc. K.J.H. (2022) Implementation of Energy-Efficient System for Solar-Powered Pleasure Yacht using dc Architecture.

Ploeg, E.M. van der (2020) Developing a Platform to Emulate Fault Injection Attacks on Cryptographic Implementations.

Ploeg, E.M. van der (2023) Design And Implementation Of An Impedance-Based Coupling Factor Estimation And Tx-Rx Alignment System In Wireless Power Systems.

Plomp, Jelle (2023) Imaging Behind the Plaque - Improved Blood Flow Imaging Using ISAAC: an Iterative Scheme for Active Attenuation Correction.

Plomp, Dhr. Jelle (2023) Imaging Behind the Plaque - Improved Blood Flow Imaging Using ISAAC: an Iterative Scheme for Active Attenuation Correction.

Pohekar, Ashwini (2019) ASIP design on behalf of hybrid beamforming in MIMO communication system.

Ponte, J. (2018) Item availability restricted.

Ponte, J. (2020) Item availability restricted.

Pool, W.R. (2021) Use of autoencoders for fingerprint encoding and comparison.

Pool, Wouter (2018) Comparison of various landmark detecting techniques in the context of forensic facial recognition.

Poort, L.A.B. (2021) Item availability restricted.

Poort, Lars (2023) Item availability restricted.

Poot, Martijn (2020) Real time posture tracking using Breathline : posture , body position and movement classification using an Arduino, accelerometer and k-Nearest Neighbour classification.

Post, Albert (2008) Endstops for the mechatronic demonstrator.

Post, Cassandra (2020) Multilabel Classification of Orchid Features based on Deep Learning.

Posthuma, L.J.H. (2023) Conversion of a sidecar configuration to an EV - A case study of the electrification of an IMZ-Ural sidecar motorcycle.

Posthumus, Ronald (2007) Data logging and monitoring for real-time systems.

Postmes, J.M. (2019) Visualizing the Physiological Synchronization of Musicians.

Potman, J. (2002) Development of a Multiuser Detection Testbed.

Prabowo, B. (2018) Item availability restricted.

Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.

Prieto Álvarez, Roberto (2020) Design of a Flat-Swipe Finger Vein Recognition Device in the NIR Spectrum.

Prins, P.J. (2012) On the effect of antenna coupling on spectrum sensing using a cross-correlation spectrum analyser with two antennas.

Prins, R. (2023) Simulating The Effects Of Unipolar Current Pulses On Faulty Static Energy Meters.

Pruis, L.M. (2023) Measurement protocol for stress induced leakage current in MOS-capacitors.

Pérez Muñoz, M.B. (2018) Item availability restricted.

Qiao, Yu (2012) Using tall vehicles as next relay hops in VANET multi-hop communication protocols.

Quinatoa, Michael (2021) Techno-Economic Feasibility of an Electric Transition for Fuel/Gas Stations.

Raa, I. te (2015) Recursive functional hardware descriptions using CλaSH.

Raalte, E. van (2019) Automating system generation in Clash.

Raben, K.T. (2019) Comparing selfh-healing techniques in approximate MAC accelerators.

Raben, K.T. (2022) Exploring Energy Efficient DSP Design for an Audio ASIC.

Radl, P.D. (2019) 3D reconstruction improvement by path planning towards physical interaction with a UAV.

Rajan, Siddharth (2020) Lifetime characterization and reliability studies of electrostatically actuated Capacitive Micromachined Ultrasonic Transducer (CMUT) devices.

Ramamoorthy, Adhithya (2022) Development of a UWB-IMU Body Motion Sensor.

Raoudi, O. (2022) EMI filter design for DC/DC converters for all electric aircrafts.

Reberc, Jost (2019) Design of a PCB for SA-ADC characterization.

Reddy, Suhaas Veera Raghavan (2024) Joint Contribution-Based Client Selection and Resource Allocation leveraging Power Domain NOMA Network.

Redeker, S. (2024) Bike Ego-Trajectory Mapping Using a CNN-LSTM With IMU and Monocular Camera.

Redonet Klip, T.H. (2018) A Built-In Self-Test as a Countermeasure for Fault Injection Attacks on Cryptographic Devices.

Redroban Gomez, Danilo Gonzalo (2021) Fast testing and selection procedure for second-life batteries based on cell-to-cell variation.

Reiling, Mark (2014) Implementation of a Monocular Structured Light Vision System for Pipe Inspection Robot PIRATE.

Reiling, N. (2020) Item availability restricted.

Reiling, Nathan (2017) Item availability restricted.

Reilink, Rob (2008) Realtime stereo vision processing for a humanoid.

Reji, Amal (2024) Simulation of Cortical Electric Fields during Deep Brain Simulation (DBS).

Renselaar, Erwin van (2023) Scaling rules for microrobots with full energetic autonomy.

Reuling, Jacco (2023) Robust Online Electric Vehicle Control at a Charging Hub.

Reurslag, H.J (2020) Item availability restricted.

Reurslag, Harm (2018) Item availability restricted.

Reuvekamp, S. (2012) Towards a six degree-of-freedom resistive force sensor : device design and bonding technique.

Rezola Exteberria, I. (2009) Learning Multi-Agent Control with OROCOS.

Rhijn, G.H.M. van (2022) Modeling, simulation and control of a setup build to study flapping motion.

Ridder, L.W. van de (2015) Design and control of an under-actuated gripper module for interaction with a remote environment.

Ridder, L.W. van de (2018) Improvements to a tool-chain for model-driven design of Embedded Control Software.

Riet, Hugo van 't (2024) Developing customized CSI data collection hardware for human presence sensing in indoor and outdoor environments.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Rijkeboer, Maaike F. (2024) A Comprehensive Study on System Level Active Balancing Methods for Lithium Iron Phosphate Batteries.

Rijnbeek, E.H. (2019) Item availability restricted.

Rijswick, D.G.B van (2021) Visualisation of EMI in Real-Time.

Rikkerink, K.B.W. (2021) Enabling Perspective Multiplication for Multi-Perspective Enrollment with University of Twente Finger Vein Scanner.

Rinsma, S.G. (2014) Design of a Reusable Teleoperation Control Architecture Applied to the youBot.

Rizwan, M. (2020) SDR based module for Low PowerWAN nodes development.

Rizwan, Muhammad (2020) SDR based module for Low Power WAN nodes development.

Roelofs, R.H. (2018) Using the Object Management Group Data Distribution Service to reliably teleoperate robotic systems.

Rolink, S. (2013) Cognitive radio: comparing cross-correlators.

Roodink, S. (2017) Large-range active load for dynamic motor testing.

Roodink, Sander (2020) Controlling deformations of a 3D-printed vibrating beam using stiffness modulation.

Rooij, V.A. van (2016) Item availability restricted.

Rooij, V.A. van (2019) Low Power System Design of DDPSK Receiver.

Rooijen, MSc M.J. van (2014) Characterization of capacitive deionization concentration profiles for small volume sample preparation.

Rossem, E. van (2009) Design of a sub-1V bandgap reference in FinFET technology.

Rossem, F. van (2009) Doping extraction in FinFETs.

Rossen, J.R. (2018) Interference robust spatial multiplexing.

Rossen, Timo van (2024) Item availability restricted.

Rotari, David (2021) Use of additional transmitters for increasing detection range in harmonic radar.

Rozendal, S.P. (2018) Redesign of a finger vein scanner.

Rozendal, S.P. (2021) Field-Weakening and Fatigue Management for Explosive Robotics.

Rozendom, S. (2024) Developing a Rapid Prototyping Kit for Interactive Sports and Movement Design within Creative Technology.

Rublein, N. (2019) Design of haptic feedback in pedal based UGV teleoperation to enhance situation awareness.

Ruitenbeek, Floris van (2023) Design of a Variable Stiffness Mechanism with Prescribed Behaviour Using a Variable Cam Pulley.

Ruiter, A.R. de (2022) Developing and demonstrating the sport-specific potential of SixFeet.

Ruiter, M. (2010) Feasibility study for a clock-controlled analog beamforming frontend.

Ruiter, Mark de (2014) Performance measurement of Hermite-based multi-carrier communication.

Ruiter, R. de (2020) The impact of temperature and mechanical stressinduced by packaging mold on the accuracy of CMOS integrated LC oscillators.

Ruiter, R. de (2024) The Impacts of Pulse Discharge Frequencies on Lithium-ion Cell Degradation Using Electrochemical Impedance Spectroscopy.

Russcher, Klaas Jan (2011) 3D estimation of a salient object.

Rusu, L.I. (2022) Perception algorithms for localization of a pneumatic endoscope.

Sadykov, Askar (2024) Reducing the dynamicrange of analog-to-digital converter in FMCW harmonic radars.

Sakthivelu, Uthvag (2021) Stride parameter estimation by fusing Radio and Inertial sensing data.

Saleh, E. (2024) Characterization of Electric Double-Layer Capacitors Using Electrochemical Impedance Spectroscopy.

Sanad, N. (2024) Implementation and Evaluation of an Embedded AI System on a Resource-Constrained Platform.

Sanga, M. (2022) A comparison of the performance limitations of RC-, Shift Register- and Delay-locked loop- based multiphase clock generation schemes.

Sankaran, A. (2022) Recurrent spiking neural networks in FPGA for signal processing applications.

Sarakiotis, D. (2012) Specification of aperitif polyphase filter bank in cƛash.

Sassen, Thijs (2009) Floating-point based control of the production cell using an FPGA with Handel-C.

Sathiyanarayanan, Prasanna (2021) Data Driven Feedforward Control of a 2-DOF Redundantly Actuated Manipulator with Flexure Joints using Machine Learning Techniques.

Savca, Alexandru (2022) Application of Electrochemical Impedance Spectroscopy (EIS) on Module Level Li-ion Batteries for Echelon Utilization.

Savca, Alexandru (2024) Advanced Thermal Modelling of Magnetic Components.

Schaaij, J.C. (2022) The self-sensing properties of continuous carbon fiber reinforced, 3D-printed beams as function of the number of reinforced perimeters.

Schaaij, Jonathan (2024) The best robot for the job : Optimising robot and actuation design through co-design.

Scheer, K.E. van der (2017) Illumination for a finger-vein.

Schellekens, T. (2010) Synchronization performance of noise-based frequency offset modulation.

Schepers, Martin (2004) Modeling a Piezoelectric Inertial Stepping Turntable Using Bond Graphs.

Schippers, Bob (2005) Dislocation engineered silicon Light Emitting Diode.

Schippers, E. (2010) Solving ambiguity problems in phase based profilometry.

Schlegel, Jonas (2023) Impact of Non-Ideal Excitations on Hysteresis Behavior in Ferromagnetic Materials.

Schlepers, Mathijs (2014) Investigation of the mechanical properties of 3D printed structures of Objet and DLP.

Scholten, Jasper (2014) Development of a multi-rotor platform with integrated thrust sensors.

Scholten, Jeroen (2004) Modelling of direct drive motors for performance improvement by design and control.

Schonewille, K.R. (2020) Efficiency comparison between Si and GaN based triple half bridge BLDC motor drivers.

Schonewille, Kevin (2023) Feasibility study of optical gate drivers.

Schooneman, M. (2015) Measurement of evoked potentials during multiple threshold tracking of nociceptive electrocutaneous stimuli.

Schoot, D.S. van (2012) Electrocavitation in nanochannels.

Schouten, Martijn (2017) Towards additively manufactured complex robotic systems.

Schulte, R.V. (2019) Up to MyLeg with data : human motor intent recognition using multi-array EMG and machine learning.

Schulte, R.V. (2019) Up to MyLeg with data : human motor intent recognition using Multi-Array EMG and machine learning.

Schut, Thomas (2017) Sensing of multiple parameters in a micro-fabricated flow system.

Schuttert, R.J. (2022) Item availability restricted.

Schutyser, Pieter (2005) An optimal controller for Desdemona for an optimal feeling.

Schuurman, B. (2021) A method for modeling the dominant parasitic behaviour of a chip interface as a RLC-network by fitting onto simulated s-parameters.

Schöndorff, Jorick (2024) Assessing the impact of a future full e-mobility scenario at the University of Twente.

Segers, O.F. (2022) Modeling milk cooling within a dairy farm to minimize electricity costs.

Seifelnasr Abdelfatah, Mohammed Moustafa (2024) Item availability restricted.

Selman, K.J.R. (2017) Development and validation of a position aiding system for inertial motion capture using Microsoft HoloLens.

Semjonovs, S. (2020) Astrobot : The far end of persuasion.

Sempere Chaves, Carlos (2018) Item availability restricted.

Senden, J.M.J. (2015) Biasing a ring-oscillator based true random number generator with an electro-magnetic fault injuction using harmonic waves.

Sequeira, Sheona M.M.D.P (2021) 3D Reconstruction of the Deformed Breast Surface from Autonomously Acquired Ultrasound Images.

Sequeira, Sheona M.M.D.P. (2019) A Home Based System for the Detection of Asthma in Children.

Seters, Nathan van (2001) Compensation of Friction in the Flight Simulator Stick using an Adaptive Friction Compensator.

Setty, N.K. (2019) Flexo - Flexible Exoskeleton for Therapeutic Use.

Shah, Nimish (2020) 3D Stereovision for Quantification of Skin Diseases.

Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.

Sibma, Steven (2019) Electron Transport through single-bismuth transistors.

Siderius, J.C. (2023) Teaching (Tiny)ML using a tangible educational kit.

Siebel, R. (2017) Video distribution in a D2D enabled 5G network supporting Public Safety Services.

Sierkstra, J.N.G. (2013) Self-assembled monolayers on nano electrodes for biosensing.

Siffels, Merlijn (2023) Investigating the Feasibility of Time Synchronization in Bluetooth Low Energy Networks: Protocol Design and Experimental Validation.

Sijs, R.F.B. van der (2022) Item availability restricted.

Sikkema, H.G. (2021) Modelling atmospheric turbulence and its influence on face recognition performance.

Sikkema, H.G. (2024) On-demand handling system for analysis and preparation of microsamples.

Sikkens, Boudewijn N.A (2017) Modelling, design and fabrication of a 3D force sensitive stylus.

Singh, A.N. (2021) Smart Control of MR safe Pneumatic Stepper Motor.

Sisseren, B. van (2007) Design of a lightweight real-time streaming kernel.

Sivaraj, M. (2016) Modeling Receiver Properties to Quantify The Receiver Performance.

Slakhorst, Robert Jan (2007) Switched Mode Piezo-Panel Driver.

Slavenas, Marius (2020) Performance Comparison of Two Digital to Time Converter Cells.

Slebos, Stijn (2023) Experimental study of a novel RF sensing application for measuring soluble sugar and electrical conductivity in the tomato plant stem.

Smeenge, A.R. (2010) Improving cross-correlation spectrum sensing using two antennas.

Smit, A. (2021) The Analysis of the Requirements Necessary to Visualize Finger Veins With a Finger Vein Swipe Sensor.

Smit, Arne (2024) Autonomous driving solely dependent on camera input and classical computer vision methods.

Smit, Kevin (2021) A high resolution grip strength measuring system for rehabilitation of hand conditions.

Smit, T.T. (2024) Investigating RISC-V hardware for autonomy in space, exact emulation-based fault injection on a hardware accelerator.

Smoorenburg, Joost van (2021) Using mixed-reality in biopsy of lesions inside deformable organs.

Sneep, R.S.M. (2019) Creating a MR safe robotic platform.

Snijders, J. (2024) Energy-Tank Based TDPC for a Haptic Setup.

Snoeijink, L.H. (2021) Room temperature characterization of DopantNetwork Processing Units. And optimization of the measuring process.

Soer, Michiel (2007) Analysis and comparison of switch-based frequency converters.

Spaan, C.E (2018) The recognition of hand gestures by evaluating micro-vibrations using a single wrist-worn highly sampled IMU.

Spaan, Camilla (2021) Development of a flexible 3D-printed capacitive shear sensor array for interaction force measurements.

Spijkerman, Sjouke (2023) Enhancing digital measurement bandwidth through novel frequency folding technique.

Spil, Gino van (2017) Delay compensation in mobile face tracking.

Spil, Twan (2014) Analytical model of the crossed wire particle velocity sensor.

Spoor, R.J.F. (2016) Design of an Ultrasound Guided Breast Biopsy End-effector.

Staal, Y.D. (2021) FPGA Emulation of Analog Subsystems for Mixed-Signal Integrated Circuit Prototyping.

Stam, Joost (2020) Energy management approaches for the smart distribution grid.

Stapelbroek, W. (2006) Higher order feedback loop for a pulse width modulator.

Steeghs, G.G.T. (2017) Developing a smart rainwater buffering system for the municipality of Enschede.

Steeman, L.L. (2022) Designing an experimental setup for transcutaneous stimulation to modulate sensory feedback.

Steenbeek, Anne (2020) CNN based dense monocular visual SLAM for indoor mapping and autonomous exploration.

Steenbeek, Lars (2023) Optimized EMI Filter Design for Electric Container Handlers.

Steenbergen, E.A. (2023) Item availability restricted.

Steenge, C. (2018) Light detection at low temperatures in silicon photodiodes.

Steenge, Céline (2022) Establishing a thermal atomic layer deposition process for AlGaN.

Stelwagen, T.J. (2018) Electrochemical detection of DNA at nanoelectrodes.

Stephan, R.A. (2002) Real-time Linux in Control Applications Area.

Sterenborg, N.E. (2023) Lightweight online Kalman-filter-based sensitivity estimator for distribution grids utilizing phasor measurements.

Sterenborg, Niek (2021) Designing a hardware accelerator for a selective sweep detection algorithm using high-level synthesis.

Straalen, B.J.J. van (2024) Transistor level implementation of a 4 phase input clock signal into an 8 phase output clock signal.

Straatman, W. (2012) Teleimpedance control of unmanned aerial vehicles.

Strating, M. (2022) Influence of positioning error on time delay based localization.

Stroeken, K.L.J. (2014) Floor vibration isolation of a coriolis mass-flow meter using filtering techniques.

Stroet, J. (2023) Item availability restricted.

Struiksma, R.E. (2011) An interference-robust wideband low-noise amplifier with balanced outputs.

Sudjito, M.A. (2021) OMNI : fun and fair game play between people with and without visual impairment.

Suleymanov, S. (2016) Design and Implementation of an FMCW Radar Signal Processing Module for Automotive Applications.

Sulzer, Niels (2019) Hardware-Efficient Real-Time Statistical Analysis on Streaming Data.

Sulzer, Niels (2022) Emulation of Analog Mixed-Signal Circuits on an FPGA.

Sun, Aiwu (2019) Building a virtual world in ROS based on the robot's perception.

Sutaria, S.S. (2021) Improving the dynamic performance of sewer inspection robot.

Szarka, Z.B. (2024) Item availability restricted.

Szewczyk, J. (2019) Passive Complex-Pole Switched-Capacitor Filters.

Szewczyk, J. (2022) Item availability restricted.

Szybisty, Zuzanna (2023) Modelling and material characterization of Er-doped waveguide amplifiers in polycrystalline Al2O3.

Taiem, Ziad (2021) Class D amplifiers for mixer-last RF PAs.

Tamarin, E. (2021) Item availability restricted.

Tanowijono, Matthew (2021) Item availability restricted.

Tanuhardja, R.R. (2013) Item availability restricted.

Teeffelen, K.J. van (2018) Intuitive Impedance Modulation in Haptic Control using Electromyography.

Tel, J.A. (2022) Optimization model describing the performance of a 3-phase coreless brushless axial flux PM machine with dual Halbach array.

Tent Beking, Michiel van (2016) Sparse Array Antenna Signal Reconstruction using Compressive Sensing for Direction of Arrival Estimation.

Terbonssen, Bas (2019) The relation between TLP and VSWR to improve the ruggedness of LDMOS transistors.

Thevissen, Ing. A.B.J.W. (2021) iRoom interface design : access to intelligence data gathered by drones.

Thoonen, M.A.W. (2019) Hardening FPGA-based AES implementations against side channel attacks based on power analysis.

Thoonen, Maarten (2022) Using activity recognition to improve heart rate monitoring accuracy.

Tieleman, P (2016) Rail-guided ballast tank inspection robot, Software architecture analysis and enhancement in the ROS environment.

Tiem, J.A.J. van (2014) Modeling, design, fabrication and characterization of a biomimetic angular acceleration sensor.

Tiggelman, M.P.J. (2005) Low series resistance structures for gate dielectrics with a high leakage current.

Tijink, M.L. (2019) Analysis of a Likelihood Ratio Classifier for Histogram Features.

Tijink, M.L. (2022) Fusing Forensic Features and a Face RecognitionSystem on Lookalike Faces.

Tijssen, Peter (2010) Interaction of TEMPO-derivative 2D spin systems with conduction electrons in thin gold films.

Timens, R.B. (2009) Performance evaluation of frequency modulation and slope detection in analog optical links.

Timmermans, L.C.H. (2021) Item availability restricted.

Timmermans, L.H.C. (2018) Item availability restricted.

Tjhin, Yoppy (2014) DOA Estimation of UHF RFID Tags in Multipath Environments.

Toebes, Isabel (2023) The design and analysis of an onboard control system of a tetherless miniature magnetic robot.

Toebes, Jeroen (2021) Why does dimmed equipment cause interference.

Togtema, M.H. (2021) Nerve Fiber Modelling for Improved Understanding of the Electrocutaneous Interface in the Context of Pain Diagnostics.

Ton, B. (2010) OFDM synchronization for the MIMO testbed.

Ton, B. (2012) Vascular patern of the finger: biometric of the future? Sensor design, data collection and performance verification.

Top, C.H. (2018) Item availability restricted.

Top, C.H. (2020) Item availability restricted.

Trethyn, Trethyn (2021) Finishing and Improving of Finger Vein System.

Trillhose, Frank T. (2016) Controlling the production cell using TERRA-LUNA.

Trip, M.H.W. (2022) Analysis of Switch-Induced Nonlinearity in a Gain-Boosted N-Path Filter.

Trouwborst, C. (2017) Towards increased autonomy of a rail-guided robot for the inspection of ballast water tanks.

Trouwborst, Cees (2014) Control of quadcopters for collaborative interaction.

Trullas Clavera, B. (2017) Item availability restricted.

Tummers, R.T.L.M. (2012) Design of control strategies for UAVs physically interacting with each other and the environment.

Twelkemeijer, R. (2008) Design of an audio power amplifier with a notch in the output impedance.

Valentijn, J.J. (2022) Modular low noise readout method for a high-bandwidth MEMS force sensor.

Valentijn, J.J. (2024) Item availability restricted.

Valkenburg, Govert (2001) On training strategies for parsimonious learning feed-forward controllers.

Varenhorst, I.A.M. (2019) Item availability restricted.

Varenhorst, I.A.M. (2022) GridShield : Robust Control Algorithms to Prevent Power Outages.

Vasileios, Papadimitriou (2015) Templated Activated Carbon for Electric Double Layer Capacitors.

Vastenhoud, G.P. (2021) Item availability restricted.

Vastenhoud, G.P. (2024) Item availability restricted.

Veenhof, S.H. (2015) Deelnemers betrekken bij een smart grid proeftuin : een sociaal wetenschappelijke analyse van acceptatie- en communicatiefactoren.

Veer, D. van der (2016) Design of a GMSK Receiver Prototype on a Heterogeneous Real-time Multiprocessor Platform.

Veersma, Sytse (2023) New force sensors that can be embedded in a soft robotics actuator using 3d printers.

Veld, N.E.D. in het (2023) Control of the Production Cell on Raspberry Pi using a real-time robot-software framework.

Veld, R. (2021) Human body blockage impact on beamforming.

Veld, R. (2023) Human gait model individualized by low-cost radar measurements.

Velde, F.J. van der (2016) Electrical measurement method and test structures for determining continuity of ultra-thin conducting or insulating films.

Velde, Luuk van der (2013) Theoretical treatment of streaming potential energy conversion using viscoelastic fluids.

Velde, N.G.J. te (2020) Item availability restricted.

Veldhuijzen, B. (2009) Redesign of the CSP execution engine.

Velkers, Arjen (2020) Investigating the coherence bandwidth and coherence distance of radio signals scattered from u rban building point clouds using physical pptics.

Velkers, Arjen (2022) Fully Metallic Linear-to-Circular Polarization Converter for Ka-Band.

Ven, B. van de (2015) The influence of annealing on gate-defined quantum dot devices.

Ven, P.A.J. van de (2017) Implementing EyePi architecture on R3D3.

Venema, M. (2016) DM3730 Camera interfaces on Gumstix.

Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.

Verhaar, Kees (2008) An integrated embedded control software design case study using Ptolemy II.

Verheij, J.G.J. (2016) Co-simulation between CλaSH and traditional HDLs.

Verheijen, Y. (2022) The Influence of MOSFET Characteristics on Power Converter Topologies for Charging of Electric Vehicles.

Verheijen, Yorn (2024) Design and Implementation of an On-Board Battery Charger based on a New Direct Phase-Modular Bidirectional Rectifier.

Verhoef, B. (2009) Design of a high speed digital to analog converter.

Verhoog, M. (2012) Electrohydrodynamic properties of gold surfaces in micro- and nanofluidic structures : Worth its weight or superficial glitter?

Vermeer, M. (2019) Interface trap density extraction from the subthreshold slope of FDSOI devices.

Verstelle, W.I. (2024) Electrical Engineering Demonstrator.

Veurink, L (2023) Item availability restricted.

Veurink, L. (2021) Item availability restricted.

Villalba Arevalo, M.N. (2021) Cell Balancing of Lithium-ion batteries.

Villamil Oostra, J.C. (2012) Design and analysis of a flat sound generator.

Vincent, S.E.J. (2019) Ion-Sensitive Gated Bipolar Transistor (ISBIT).

Vink, L.W.A. (2024) Identification of wireless devices in the 2.4GHz band using machine learning.

Vinkenvleugel, J.T. (2022) Designing an embedded software architecture for a mobile education robot with real-time control on a Raspberry Pi 4 with FPGA-based I/O.

Visschers, S.H.J. (2019) Perception-aware visual odometry.

Visschers, Stephan H.J. (2019) Perception-aware Visual Odometry.

Visser, L.E. (2019) Navigation for PDT in the paranasal sinuses using virtual views.

Visser, Ludo (2008) Motion control of a humanoid head.

Visser, P.M. (2002) Control Software Design and Safeguarding with the support of UML and CT.

Vissers, E.J.P. (2016) Acquisition Time and Image Quality Improvement by Using HDR Imaging for Finger-vein Image Acquisition.

Vissers, E.J.P. (2018) Optical nonlinearity in titanium dioxide waveguides.

Vissers, T.H.J. (2024) Controlling Sunram 7 with a Space Mouse.

Vitanov, Vesselin (2018) The asteroid field of your mind : examine neurofeedback effects in an interactive art installation.

Vliet, Frank van (2010) Threat detection systems.

Vliet, T.B. van (2019) Development of a smart wearable : to monitor the physical activity of elderly hip fracture patients during their rehabilitation.

Vocke, Tom (2015) An evaluation of the Adapteva Epiphany Many-Core Architecture.

Volbeda, Jelmer (2024) Anti-Backlash Mechanisms for Cost-Effective Cycloidal Drive Robotic Actuators: Design and Evaluation.

Vollenbroek, J.C. (2016) Design and characterization of a microreactor for monodisperse catalytic droplet generation at elevated temperatures and/or pressures.

Vonk, R.V. (2012) Likelihood functions for Window-based stereo vision.

Vos, Peter-Jan (2013) Effect of system parameters on target motion.

Vos, R.A.C. (2021) The beginning of a robot-actor.

Vos, S.P. de (2018) Improving efficiency of tri-state boost converters for audio applications using dynamic freewheeling.

Vos, S.P. de (2020) Item availability restricted.

Vossen, J.J. van (2016) Offloading Haskell functions onto an FPGA.

Vouzavalis, Antonios (2020) Capturing car market dynamics in the transition towards electric mobility in an agent-based simulation model.

Vree, J.H. de (2017) Design of an Energy Efficient 12-bit 100MS/s SAR ADC in 22nm FD-SOI.

Vreeken, R (2019) Item availability restricted.

Vries, BSc G.J. de (2019) Development of a myocardial perfusion phantom.

Vries, H. de (2020) Numerical feasability study of the low-voltage SJ AMLED.

Vries, Hidde de (2023) Portable State of Power Determination of Li-ion Battery Cells.

Vries, J.F. de (2018) Redesign & Implementation of a Moment Exchange Unicycle Robot.

Vries, R. de (2008) Switching behavior of nano scale light sources.

Vries, R.A. de (2013) How to determine position, rotation and orientation for a tethered twin nano satellite with sufficient accuracy to map data from an interferometer.

Vries, R.A. de (2018) Impact of the indoor propagationchannel on a novelBluetooth-compatible ranging method.

Vries, T. de (2020) Offset tolerant hybrid demodulator in presence of a wide filter.

Vries, Torben de (2022) Item availability restricted.

Vrooijink, G.J. (2012) Real-time three-dimensional tracking and steering of flexible needles using two-dimensional ultrasound images.

Vuckovic, M. (2023) Current-voltage performance of a novel flexible solar cell.

Vugt, Pieter van (2013) Behavioral models of nonlinear power consuming loads.

Vural, Gürhan (2011) Microwave power amplifier design using stack topology.

Waals, F.W.J. van der (2024) Flexibility Informed Profile Steering using Shapley Values.

Waanders, Stefanie (2023) Comparing Current Sensors for Power Measurement of Linear and Non-Linear Appliances.

Waard, J.R. de (2022) Price steering for households with electric vehicles and solar panels.

Wagter, W.H. (2023) The effect of battery storage on local residential distribution grid : How can batteries help reducing peak loads on low voltage residential electricity grids.

Walle, R. C. M. van der (2019) Streaming array modelling and generating VHDL with Python.

Wang, Haitao (2017) Redesign of the E-Cone: A tool for treatment of hand disease.

Wang, JInze (2023) The development of an interactive mountain bike simulator to help injured mountain riders reduce the fear of re-injury while cornering.

Wang, W (2019) Comparison of Power Line Filter Orientations.

Wang, Zhiyuan (2017) Slow wireless communication testbed based on software-defined radio.

Ward, G.Y. (2024) Bilateral Control Scheme for Surgical Robotic System Collaboration.

Weenk, D. (2011) Automatic identification of inertial sensors on the human body segments.

Wegewijs, Ray (2024) Single-hole Transistors and Annealing : The effect of annealing temperatures on passivation and dewetting in SHTs.

Wei, Z. (2008) Design of application specific high bandwidth Nyquist DAC.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Welleweerd, M.K. (2017) 3D Printing a three degrees of freedom force sensor.

Wenting, M.J.M. (2015) Item availability restricted.

Wentink, D.J.M. (2017) Signal Recovery using CλaSH.

Weske, P. (2020) Item availability restricted.

Wesselink, B.H.T. (2021) Reducing memory requirements for Neural Networks trained for Direction of Arrival Estimation : Making Neural Networks more practical for use on a Low-Cost Real-Time Embedded System.

Wettum, Y.C. van (2017) Facial landmark tracking on a mobile device.

Wevers, M.H. (2017) A Novel Demand Response Program : Using the flexibility of residential prosumers for stability on both national and local level.

Wigchering, R. (2017) The theory of the Negative-Capacitance-FETs gate-stack.

Wigchering, R. (2021) Item availability restricted.

Wiggers, F.B. (2013) Measuring the dielectric constant of liquid on a chip with silicon nanowires : scientific investigation of the measurement principles and functionality.

Wiggers, KM (2020) The Physicalization of Risk Models.

Wijk, R.H. van der (2023) Designing 8-bit approximate multipliers for FPGA using internal self-healing.

Wijngaarden, Bas van (2022) Optimisation of the silicon drift detector.

Wijngaarden, P. van (2011) Frame capture in IEEE 802.11P vehicular networks: a simulation-based approach.

Wilbrink, E.J.J. (2022) Measurement-based rotational hand gesture recognition using mmWave MIMO FMCW radar.

Wilbrink, E.J.J. (2024) Energy Recuperation between DC Motors using Dynamically Reconfigurable Switch Grid.

Wildeboer, Jochem (2018) The effect of cleaning on silicon-dopant evolutionary chips.

Willemink, G.H. (2005) Segmentation and Motion Estimation of Multiple Independently Moving Objects in Stereo Video Streams.

Williams, N.J. (2024) Item availability restricted.

Willink Castro, Teodoro J. (2012) Antenna system design for OLGAR"s inter-satellite link.

Wilmes, Daniel (2022) A general optimization framework for soft robotic actuators with analytical gradients.

Wilterdink, Robert (2011) Design of a hard real-time, multi-threaded and CSP-capable execution framework.

Wisselink, N. (2022) Design of an FPGA based PLL system.

Wit, Erik de (2016) Charge carrier transport through silicon nitride membranes and fabrication of solid-state nanopores.

Witsen, Michaël van (2014) Superconductivity in real space.

Wolf, T. (2016) Design of an Air Factor Sensor based on Light Emission.

Wolterink, G.J.W. (2017) 3D printing of soft sEMG sensing structures.

Wopereis, H.W. (2012) Characterization of the mVSA-UT.

Wotte, Y. P. (2021) Optimal Potential Shaping on SE(3) via Neural Approximators.

Wu, Kai (2014) Design, Fabrication and Characterization of a Piezo-electric Micro Control Valve.

Wu, Q. (2021) Investigate an optical readout method for a micro Coriolis mass flow sensor.

Yadav, Shubham (2019) An Asynchronous Approach for Designing Robust Low Power Circuits.

Yang, J. (2023) Item availability restricted.

Yang, L. (2018) Improved capacitive readout for a Coriolis mass flow sensor.

Yuetian, Zou (2016) ADC buffer with fast settling and lower power consumption.

Zakiy, Mochammad Fadhli (2016) HW-SW co-Design of an On-Chip IJTAG Dependability Processor.

Zandberg, K. (2016) Passive fingerprinting on an IPv6-enabled network.

Zandberg, Koen (2020) Dataflow-Based Model-Driven Engineering of Control Systems.

Zanen, J.O.P. (2017) Item availability restricted.

Zanten, S. van (2017) AM/PM Conversion in Transceiver Systems.

Zanten, S. van (2020) Item availability restricted.

Zee, E.M. van der (2024) Design and control of a hybrid PCS for railway stations utilizing energy storage, regenerative braking, and PV.

Zee, R. van der (2020) Cutter tooth replacement robot.

Zhang, F. (2023) SDR-based concurrent multi-band event matching using bistatic Wi-Fi "radar".

Zhang, Xiang (2018) Realization and characterization of a resistive readout for a micro Coriolis mass flow sensor.

Zhang, Yuchen (2005) Real-Time Network for Distributed Control.

Zhao, Dongsheng (2004) EMC study of an automotive application.

Zhao, Wei (2018) New physical effects induced by the PZT layer integrated in AlGaN/GaN HEMTs.

Zia, Sayedamid (2019) 3D-Printed shear force sensors.

Ziegelhöfer, Mark (2024) Educational escape rooms to raise awareness of the climate crisis.

Zijlma, Emiel E (2020) Item availability restricted.

Zon, K. van (2011) Scenario based SLAM.

Zonneveld, T. van (2021) 3D finger vein patterns : acquisition, reconstruction and recognition.

Zonneveld, Thomas van (2018) Realisation of a safety-cage with integrated force sensing for interactive aerial robots.

Zoontjes, M.G.C. (2010) Controlling the magnetization at the conical apex of a multi-terminal STM probe.

Zuijlen, Jasper van (2008) FPGA-based control of the production cell using Handel-C.

Zulkarnaen, Z. (2019) Separation of Interaction Wrench and Wind Disturbances from Wrench Observer in Fully-Actuated UAVs.

Zutphen, Lucas van (2024) Developing a Track and Hold Architecture for High Swing and High Slew Rate Sine Wave Inputs Using 130 Nanometer CMOS Technology.

Zutt, Bas (2023) Performance Comparison of two Integrating-Mode Phase Interpolators.

Zwiep, L.G.H. (2021) Mechatronic solution for stress-wave generation using impact echo.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.