University of Twente Student Theses
Domain: 58 process technology
Up a level |
2024
Andrei, Luca (2024) Test Quest : Improving the onboarding experience for novice Dungeons and Dragons players through personalised AI-generated content.
Apriyandi, Dimas (2024) A Smart Tourism Platform Reference Architecture for Developing Countries.
Blok, J.E. (2024) Digital Product Passports : Increasing Transparency in the Fashion Industry.
Brink, H.A. (2024) An introduction of a structured business process, making the RTS composition process structured and data-driven.
Chalan, Ghusen Nabil (2024) Developing Objective Comparison Evaluation Framework for Comprehensive IaaS Assessment Using the AHP Method.
Cijffers, Carmen Julia (2024) Improving the Occupancy Rate in the Distribution Center by Developing a Material Handling System Optimization Approach.
De Porto, T.C.S. (2024) Estimating the workload through the analysis and monitoring of processes and their durations at the GEO-Team of the Municipality of Enschede.
Dollenkamp, S.J. (2024) Optimizing the Changeover Process for the Production on Jacketing Line 2 at TKF.
Dulfer, Simone (2024) Towards the realisation of self-aligned nanometre scale tunnel field effect transistors.
Gupta, Pratyush (2024) A Comprehensive Study on Feature Detection Algorithms and Fine-Tuning Methods for Efficient Metadata Extraction in Construction Drawings.
Gülçay, Zehra (2024) Improving Master Data Governance Processes Within Supply Chain Management.
Hankel, Zachary (2024) Trivializing Values with Dark Patterns : An ethical analysis of the use of Dark Patterns by social media platforms and their effect on personal and societal values.
Heitkamp, M.J.F. (2024) Lunar Water Extraction : Design, Optimization, and Development for Future Space Exploration.
Holstege, Nadia (2024) Design and optimization of a devulcanization process for butyl rubber.
Houten, Floortje van (2024) Improving the management of changes in the engineering-to-order environment at Company X.
Höner, Maike (2024) Optimizing train station inspection operations in the region of Magdeburg.
Idzes, J.E. (2024) Optimisation of the post-calculation process.
Kareem, Jonas (2024) Fabrication and electrical characterisation of hexagonal GeSi nanowire devices.
Klein Koerkamp, Darryll (2024) Towards An Efficient and Standardized Warehouse Optimization Strategy : An Automated Performance Analysis Model.
Kooke, Thom (2024) Enhancing Cost Estimation Processes In Industrial Construction Through BIM.
Kosters, S.W.L.G. (2024) Development of a Multi-Objective Resource-Constrained Scheduling Method for the Utility Construction Sector.
Kremer, Mathijs Harry Franciscus (2024) Improving Parenteral Medication Administration at Home pathways.
Krullaars, T. (2024) Integrating and optimizing the milk-run of Thales Hengelo by creating a Vehicle Routing Problem model.
Kuijper, M.R. (2024) Optimizing the sequence-dependent setup times of a machine using an optimal lot size heurisitic for TKF.
Lambalgen, N.R. van (2024) Simulating the Semiconductor Manufacturing Process through AutoSched Advanced Processing : An Exploratory Study to Enhance NXP’s ASAP Model Forecast Accuracy.
Lamers, B.G.H. (2024) Optimize the Automated Storage and Retrieval System (AS/RS) of Vink Kunststoffen to improve warehouse efficiency.
Lamers, M.E.G. (2024) Process defects and resulting structure of unidirectional CF/LM-PAEK after induction welding.
Lin, C.Y. (2024) Enhancing Cancer Treatment Planning : A Combined Approach of Process Mining and Machine Learning with a Focus on Colorectal Cancer (CRC).
Luijtelaar, R. S. van (2024) Reducing the Excessive Waste Production in the Cracker Production Line at Company X.
Meulenbroek, Nils (2024) Transitioning to a counter-based maintenance strategy at the packaging filling lines of Heineken.
Michshenko, Yekaterina (2024) Monitoring of Lymphedema in the Arm after Cancer in the Home Environment.
Naastepad, Julia C.J. (2024) Strategies To Decrease Emissions in Freight Transport.
Oosten, B.T. van (2024) Developing a plate nesting algorithm for a steel processing company.
Perijoc, S.N. (2024) Quantum AI for Application in Industry : A Workflow Model.
Peters, Sabine I. (2024) Structuring the Sales process to improve the information handling surrounding the sale and production of complex machines.
Pleijsier, N.S. (2024) Establishing a communication medium to stimulate air cargo companies at Schiphol Airoport to pre-register shipment information, with the goal of reducing throughput times at the airport.
Reuvers, J.M. (2024) Thesis on using interactive interfaces to assist with smoking cessation.
Rolleman, L.T. (2024) Guiding Voortman customers to optimize machine output.
Ruiz Flores, Diana Cecilia (2024) Hydrogenolysis of biomass to ethylene glycol : a yield improvement and its effects on lignin.
Schmale, M.D. (2024) Ceramic Surfaces as a Source of Luxury in Handheld Devices: A Study on the Physical Attributes that Predict Luxury and how to apply these in technical ceramics manufacturing.
Smit, Colin (2024) Analysis and recommendations to improve the Request for Quotation process.
Spée, Boín (2024) Optimizing Decision-Making During Product Phase-Out at Company X : Balancing Financial Risk Mitigation and Customer Satisfaction.
Stoica, Eva (2024) The Complexity of an IT Landscape : A Method for Quantifying Application Landscape Complexity and Understanding the Cost of Complexity.
Timmerman, T.H. (2024) Optimizing assembly line fill rate by minimizing the losses due to discrepancy between truck and workstation lengths.
Veldhuizen, A.R.P. (2024) Reducing Pulsation in External Gear Pump Output for Rubber Extrusion.
Veldkamp, Galina (2024) Deriving adequate insights in HMLV manufacturing.
Veth, M.G.S. (2024) Improving Market Intelligence : Developing a Centralised Knowledge System to Foster Data-Driven Decision-Making.
Veuger, D.H.W. (2024) Maximizing the travel time efficiency of the automated storage and retrieval system of company X.
Wilt, Yannick van der (2024) Conduction welding of thermoplastic composites : An experimental study towards specifying the process window for process time and temperature.
ten Holder, C.S. (2024) Making Qualitative Attack Trees Accessible : A Gamified Interactive Visualization for Non-Expert Stakeholders.
2023
Albertsboer, E.E. (2023) Planning and scheduling for animal shelters.
Arens, B.G.J. (2023) Analysing the production waste at a printing company.
Balha, A. (2023) Increasing fuelling capacity of hydrogen trains while minimising costs at Provincie Groningen : Designing hydrogen fuelling infrastructure in railway.
Behrendt-Richter, Luis Matthias (2023) An exploratory study using text mining methods to investigate online therapists' feedback texts for the use of empathy.
Bloemendaal, J.A.E. (2023) Improvement of the customer order fulfillment process.
Boekee, F.S.C (2023) Improving the alignment of the AGRI production process at Apollo Tyres Ltd.
Boekhoudt, Daan Fokko (2023) Variation reduction through PMC integration and evaluation.
Boersen, N. (2023) Optimizing Resource Allocation for Outpatients : Machine Learning-Based Length-of-Stay Predictions and Patient Scheduling.
Bos, Maxim (2023) Continuously optimizing business process using process mining.
Ergle, Ruta (2023) Enabling the eCMR signing process by implementing e-signature software for Vervo.
Goor, P.B. van (2023) Analyzing operational risks of the Source-to-Pay process at Nedap N.V.
Groot, Emma (2023) Efficient Allocation of Midwives at the New Setup of the Emergency Medical Center at Medisch Spectrum Twente.
Haasewinkel, M. (2023) Improving the efficiency of the transfer press at Kvadrat High Performance Textiles.
Hettema, V.L. (2023) Reducing the collection time of printing orders at Ipskamp Printing.
Horselenberg, Jelle (2023) Improving warehouse efficiency: A study of the KPIs and picking process at Benchmark.
IJpma, C.F. (2023) Improving the delivery reliability from Company X to its customers by inventory optimization while limiting the increase in overall inventory value.
Jeurissen, S.G. (2023) Dairy side-stream valorization through the application of microbiological processes.
Kalcheva, Y.K. (2023) Subpopulation process mining in health.
Koerselman, Noah (2023) The Impact of AI on the Banking Industry.
Kok, D. (2023) Towards the optimal maintenance process according with the EN-17007 standard.
Kokkeler, C.J. (2023) PROMISE : Process Mining for SMEs: a Methodology.
Koning ter Heege, S. (2023) Simulating expected On-Time, In-Full delivery performance for fertiliser transhipment facilities.
Koopman, N.H.D. (2023) Improving internal routing operations in the automotive industry.
Koppele, I. M. Z. te (2023) Dashboard on lead times.
Kruif, Iris de (2023) Designing a KPI dashboard for the test process of tape drives at Bluetron.
Kuks, E.M.A. (2023) Enhancing reuse ecosystem development for primary FMCG packaging : the development of a support tool for the supermarket branch.
Lagerburg, R.A. (2023) Overcoming Challenges in Software Development Projects: An Integrated Approach for Small and Medium Enterprises (SMEs).
Langeveld, K.A. (2023) Increasing the revenue from service-provision through servitization.
Lee, T.K.H. van der (2023) Kinetic modelling of LDPE hydrogenolysis using non-linear regression.
Maryam, Sahlabadi (2023) Balancing Energy Transition Policies & Sulfur Recovery Efficiency in the Netherlands.
Michael, Michael (2023) Moisture Optimization and Heating Process Automation of Freeze-Dried Coffee Production: A Case Study at Jacobs Douwe Egberts Peet's.
Nijkamp, D.M. (2023) Matching Input Stream to End Product with Production Restrictions : improving business processes.
Ozo, R.O. (2023) Providing recommendations for reducing mean and variability in attenuation of optical fibre cables at TKF’s end control.
Palanikumar, C. (2023) A process mining framework for continual service improvements.
Potters, E.M. (2023) Pharmaceutical Cold Supply Chain Management Considering Medication Synchronization and Different Delivery Modes.
Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.
Richards, Carithea (2023) Urban Production : Exploring Urban Manufacturing Scenarios for Future Urban Resilient Cities.
Schultheiss, J. (2023) The Effect of Spacious Virtual Nature and Personal Storytelling on Social Connectedness in Young Adults.
Schuppert, W.L.C. (2023) Optimizing computed tomography scan scheduling for sustainable energy usage : a simulation study at Medisch Spectrum Twente.
Sombroek, E.S. (2023) Establishing a TCP connection between a Graphical User Interface and the controller of a robot.
Stroop, Babet (2023) Capacity pooling within the midwifery profession, what are the effects?
Sueters, M.L. (2023) Reducing the total travelling distance of order picking in a warehouse by introducing class-based storage.
Uijthof, E.M.T. (2023) Physics-informed reinforcement learning for process design.
Velze, B.S. van (2023) Departmental integration of an automated material logistic system Case study of integrating an automated material logistics system within the Zaans Medisch Centrum surgical department.
Weezel, Giel J.W. van (2023) Breast Cancer Screening in the Netherlands : a Health Economic Evaluation of Screening Strategies.
Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.
Wilbers, G.G.B. (2023) The design of an Acute Medical Unit.
Wit, L.J. de (2023) Truck inventory replenishment process optimization at REMONDIS Smart Infra.
Yadhukrishnan, (2023) Designing and Optimizing a flexible Battery Pack Manufacturing Process Incorporating Cylindrical and Prismatic Cells: Key Factors and Strategies.
Yang, J. (2023) Item availability restricted.
Zallaya, Sara (2023) Methanol as a Hydrogen Carrier Coupled with Magnesium-Based Oxides Carbonation for Carbon Dioxide Capture.
Zandschulp, L.J. van de (2023) Design of a framework and warehouse facility at ROSEN Europe.
2022
Aleksandrov, A. (2022) Evaluating the sustainability of a technology by performing a supply chain analysis.
Alves da Silva, Sarah (2022) Knowledge Management System Design For An Agile Digital Agency : The Case Of El Niño B.V.
Antvelink, S.E. (2022) Optimisation of a software development process.
Assink, J.G. (2022) Estimating workload through forecasting and monitoring processing times.
Beurs, J.A. de (2022) Decreasing the time spent on administrative actions in the scheduling process of TenCate Geosynthetics.
Bon, X.T.M. (2022) Humanitarian Drone Logistics after a flooding event : assessing the effects cargo drones can have on relief operations.
Boomers, J.T.W. (2022) Improving the medium-term and short-term production planning process of semi-finished products at a cable manufacturing company.
Borggreve, P.J.P. (2022) Designing a Cash-Flow Model to assess Service Requests.
Borren, J. (2022) Supporting an agile working environment for the Information Provision Department at Menzis.
Buitenhuis, Kilian F. (2022) Optimising the OPCAB simulator movement mechanism.
Dieren, W.M. van (2022) Lead Time Reduction, from forecasted to reactive assembly.
Groot, G.J.L. de (2022) Evaluative study on the maturity of Bender Groep's information systems utilization.
Groot, M.J.A. de (2022) Sustainability of the HVAC systems in the clinical operating room department.
Hagen, Quinziano ten (2022) Order Advancement in a Multi-Item Two-Echelon System: Theory and Case study.
Harmsma, W.H. (2022) Automated detection of hidden failures in heating and photovoltaic systems of ‘Nul-op-de-meter’-housing Projects.
Heij, J. de (2022) Using Discrete Event Simulation (DES) to improve productivity of Shell Ghent's grease manufacturing plant.
Hoeven, S. (2022) Simplified trench-assisted surface channel technology for high-temperature microfluidics.
Horn, D.M.J. van (2022) Process improvement using machine learning.
Irfan, Tekinerdogan (2022) Online platform for supporting the development of assistive technology tools for disabled people.
Jansma, W. (2022) Improving the productivity of cranes in the construction industry.
Kerkhof, R.G. (2022) Benchmarking Car Dealership Efficiency using DEA NSBM.
Leij, R.M. van der (2022) The development of a method and tool to quantify sustainability for decision-making in product development : a case study applied at Van Raam.
Limpers, W. (2022) Production process design in the sheltered workshop of VMI.
Lute, S. (2022) Improving retailers' inventory updates in an online shopping platform : establishing a method for real-time inventory connection.
Marčetić, N. (2022) Community-based design to help older adults to increase their physical activity.
Miu, Ioana (2022) A Reference Model for Decarbonising the Passenger Aviation Ecosystem.
Moghaddar, A.A. (2022) Enhancement of Formula One Driver Performance by Group Driven Process Learning.
Neacsu, T. (2022) From EDIFACT to OpenTripModel: analysis, migration and guidelines based on data from real-world logistics companies.
Nijhof, E.Y. (2022) Planning interdependent tasks in house construction - an extension to the critical path method.
Nijs, Luuk (2022) Impact of the weekday-effect on stroke care in Slingeland Hospital.
Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.
Prins, S.A. (2022) Creating a Tailored Analysing Methodology for VMI.
Riet, D.S. den (2022) Improving the sustainability of waste streams at the Heart Center of Isala Hospital in Zwolle.
Rouwers, J.A.M. (2022) Inventory Management optimization through a Demand Forecasting improvement.
Ruiter, J.B.C. de (2022) Reducing process variation on the Coating line at TKF by implementing a statistical analysis method.
Verkerk, Lotte (2022) Improving the planning process by developing a forecasting model : predicting future demand based on historical information.
Veuger, D.H.W. (2022) A Research on which panel bender Pan Oston should implement in the production process.
Zheng, Y.F. (2022) Process mining on FIFA controller data.
Zuidema, Dennis (2022) Work Breakdown Structure as a method for planning and control at Nijhuis Bouw.
2021
Abbink, R.J.C.M. (2021) Optimizing operations at an orthopaedic hospital. Forecasting patient distributions and implementing strategies.
Akgül, E. (2021) Improving inventory management through demand forecasting at Bronkhorst High-Tech.
Becks, M.B. (2021) Implementation of MES at small EMS providers.
Benneker, Bram G. (2021) Development of a Cost Price Model to Support Bid Price Estimation.
Berghuis, Lars (2021) Using the Wisdom of the Crowd to Digitalize : Designing a workshop-based process selection method for the identification of suitable RPA processes.
Bogt, J.H.W. ter (2021) The influence of consolidation on bending behaviour of molten unidirectional fiber reinforced thermoplastic tapes.
Bos, Maxim (2021) Improving production performance.
Bos, N.D (2021) Improving the Chess Elo System With Process Mining.
Bruin, F.H.J. de (2021) Self-organizing logistics in container hinterland planning : a case study at Combi Terminal Twente.
Cijffers, C.J. (2021) Productivity in the transport hall.
Derkink, T. (2021) An insight in the planning of the maintenance process of wheel axles at Nederlandse Spoorwegen.
Dijkstra, BSc S.H. (2021) Bright Beer Cellar planning and scheduling at Heineken.
Enkhuizen, M.J. van (2021) Innovative Data sharing in logistics, migrating from UN/EDIFACT to the OpenTripModel.
Feddema, J.B. (2021) Optimising the data acquisition and data delivery of the WenS process at ProRail.
Geerts, F.M.P. (2021) Optimizing the online customer journey of Sentio.
Graumans, Lisan (2021) Subpopulation Process Mining in the ICU for Patients Diagnosed with a type of Pneumonia.
Grootte Bromhaar, I.G.H. (2021) Improving the labour utilisation in the product finishing process.
Haan, W.J. (2021) How can process mining be used to identify Robotic Process Automation opportunities?
Heuvel, D.M. van den (2021) Data-driven logistics : improving the decision-making process in operational planning by integrating a supervised learning model.
Holsbrink, G.R.B. (2021) The optimal allocation of casualties to hospitals in case of a mass-casualty incidence.
Holst, T.G.M. van der (2021) Turning data into value : determining which intelligent process automation technologies can be used to automate the process of ordering packaging at Company X.
Jongejan, M.R. (2021) Introducing maintenance performance management at dairy producer X : managing the adaptation of preventive maintenance for the maintenance department.
Kerckhoffs, N.N.J.H (2021) Business process optimization: An approach for improving organizations by integration of external data.
Klein Koerkamp, Joey (2021) Production scheduling at MPS-level under nonlinear-capacity constraints.
Koers, Roy (2021) Decreasing the error-susceptibility of the current administration process of PMC 1 at the company.
Koning, T.A. de (2021) Optimisation of the weight stabilisation system at Jacobs Douwe Egberts : a discrete-event simulation study.
Koopman, M.P. (2021) Data Driven wheel set usage prediction and inventory control.
Korver, M.C.J. (2021) Improving the production planning of a producer of plastic packaging.
Koster, F.F.J. (2021) Optimization of planning and resource use.
Kraaijvanger, S.G.W. (2021) A simulation study; modelling Ubbink’s tugger train replenishment system, in a Kanban controlled environment.
Kruger, M. (2021) Creating a portfolio of the applications at Traffic Today.
Kruit, M.N. (2021) Increasing the EMVI score by developing a dashboard.
Kösters, D.M (2021) An improvement to the refill process of vending machines : a thesis about demand analysis, product range improvement and review period calculation.
Lammerink, L. (2021) Development of a supplier analysis and selection tool within the purchasing department of a production company.
Leuverink, J. (2021) The eggficient Prinzen, Insights in the throughput time.
Maximova, A. (2021) Lifestyle games are not only for people with obesity.
Meijer, T.G.J. (2021) Improving the tactical planning process to stabilize the workload.
Midden, J.H. van (2021) Using process mining and event log analysis for better business strategy decision-making.
Morrenhof, M.A. (2021) Using mathematical modelling to create a driver schedule while taking scheduling restrictions into account.
Nijhuis, M.C. (2021) Tactical planning to facilitate patient self-scheduling.
Oosterloo, M.J. (2021) Predicting the required public charging capacity for electric vehicles in Zwolle.
Overmars, D.M. (2021) Modelling uncertainty in a configurable environment : a case study at Pan Oston.
Pelgröm, F. (2021) Waarom staat de productie stil? : Het herontwerpen van een productieproces bij DCW.
Peperkamp, M.W. (2021) Design and optimization of the pultrusion process toproduce reliable and recyclable wind turbine blades.
Rao, Bolar Vanishree (2021) A study towards the optimization of pultrusion processes: process - microstructure -property correlation.
Rensen, J.J. (2021) How to align storage and order picking in the VMI warehouse.
Roelink, Daniël (2021) Improving the batch handling of the container-series line at Easy Sanitary Solutions.
Rous, E. (2021) Shopfloor Organization and management system : developing a software system for a matrix-production system.
Scholte Lubberink, D.L. (2021) A Multiple-Case Study on the Future of Roles and Competencies: Purchasing, Logistics, Marketing, and HRM.
Segerink, Anton (2021) Ontwikkeling van een BPM IT-oplossing voor productiviteitsvisualisatie in een magazijn.
Shenkute, Nathnael Teodros (2021) Introducing Artificial Intelligence in Fast MicroGC Analysis.
Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.
Sipma, K.E. (2021) Combining smart charging and energy storage for peak reduction at EV fast-charging stations.
Snellen, L.A.S. (2021) A Capacitated lot sizing and scheduling model with sequence-dependent setup costs and setup times to improve the tactical production planning of Frieslandcampina.
Snieder, D.A. (2021) Finding a common understanding surrounding lead times : a procurement process analysis in a make-to-order setting.
Sparrius, T. (2021) Contest theory models of long-term advertising and short-term competitive behaviour.
Tas, J.G.A. van der (2021) Developing a prescriptive IT architecture maturity model (ITA-MM).
Tenhagen, C.J. (2021) A simulation study to the prediction of COVID-19 in the Netherlands.
Thelen, E.A.H. (2021) Evaluating the return process of international books at Company X.
Toering, N. (2021) Accomplishing a high delivery satisfaction by switching to a better process-supporting planning system.
Tzani, Donika D. (2021) Using Enterprise Architecture for controlling complexity and improving business performance.
Ungerer, L.V. (2021) ICT implementation: Comparing theory with practice.
Valk, C.M.S. van der (2021) Pioneering with Mixed Integer Linear Programming as a solution to a Two-Stage Hybrid Flow Shop with No Buffer Capacity : a case study for confectionary manufacturer Brynild.
Vegt, C.R. van der (2021) Analysing and visualising data to improve the productivity level of an Agile organised company.
Welling, S.A. (2021) Improving the allocation of cream for FrieslandCampina.
Wieringa, J.K. (2021) Bot for continuing airworthiness : proof of concept for passenger carrying drones.
Wit, L.J. de (2021) Optimising the planning process for the field service of REMONDIS Smart Infra.
Wolfkamp, T.J.H. (2021) Optimization of the high consumption logistic process at Scania Production Zwolle.
Yakushkina, Daria (2021) Digital Transformation in conditions of pandemic.
Zwanenburg, M.I. (2021) Process Design and Resource Allocation at the ProRail ERTMS Integration Lab.
Zwiers, R.J. (2021) A modified cheapest insertion heuristic for the multi-objective pickup and delivery open VRP with time windows for a homogeneous fleet with heterogeneous freights : a case study.
el bou Messaoudi, Ferial (2021) Supporting Infotopics in finding user cases to apply a business Process Mining solution.
2020
Aminian, Roozbeh (2020) Wat-IF : decision-support tool for sustainable wastewater treatment plants in the Netherlands.
Arends, Simon Daniël (2020) Quantity meets quality for mined process models through simulated events.
Azani, Maryam (2020) Supply Chain Control Tower Reference Architecture for Exception Monitoring and Real-Time Incident Management.
Beek, J.J.W. van der (2020) A Method for Combining Agile, Internal Control, and Stakeholders' Needs.
Beeldman, Sander (2020) The automation of the material handling process at company X.
Burg, Sascha (2020) Designing an app prototype for employee business travel using value-based requirements engineering.
Cârcoană, Sebastian (2020) Assessing the implementation of ultrafiltration in a Brazilian kraft pulp mill.
Dam, I.E. van (2020) The redesign of the inbound exception process.
Defize, D.R. (2020) Developing a Maturity Model for AI-Augmented Data Management.
Dekker, K.J. (2020) Maintenance Optimization Through predictive Maintenance: A Case Study For Damen Shipyards.
Dongen, J.A. van (2020) Reducing the throughput time at machine-builder X.
Dort, D.J.A. van (2020) Changing webshops as we know them : supporting customers to be in control.
Egberink, J.T. (2020) Optimizing the processing of purchasing invoices.
Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.
García Martínez, J.B. (2020) Study of water adsorption on an amine adsorbent for Direct Air Capture of CO2.
Havinga, J.R. (2020) Increasing the capacity in the current building of Niverplast.
Hendriks, Koen (2020) The improvement of objective milkfoam quality analysis through image processing and computer vision.
Horselenberg, J.J.A. (2020) Reducing the waiting times in the manual moulding department : a simulation study.
Hugen, T.E. (2020) Curing plate problems : production schedule evaluation for assessing equipment availability.
Huitink, N.J. (2020) Workforce Prediction of Order Picking Personnel.
Jansink, J.F. (2020) Spare part stocking with service differentiation and compounded arrivals.
Kamp, S.A.M. (2020) Improving operating room utilization at Bergman Clinics: Evaluation of various surgery scheduling approaches using discrete-event simulation.
Kamphuis, E.P. (2020) Developing and applying a framework for fast-moving consumer goods companies to visualize the output of a cost-to-serve analysis.
Kasteel, A.K.H. (2020) Optimization of the supply chain to improve the on-time performance.
Kauffeld, Bastiaan / B.G (2020) Dynamic scheduling using dispatching rules in a hybrid flow shop with stochastic processing times.
Kloppenberg, J.B. (2020) Improving the production facilities’ layout to decrease the busyness at Timmerije B.V.
Koning ter Heege, S. (2020) Gaining insight in the constraints of the monthly demand on a tyre production plant to improve production adherence.
Krullaars, Thomas (2020) Monitoring the execution of the invoice process of Sensata by designing a tracking tool.
Lansink, T.T.M. (2020) Improving inventory management through ERP implementation.
Leijnse, N. (2020) Order fulfillment of spare parts during the end-of-life phase.
Lerink, C.W. (2020) Visualisation of fouling during oil-in-water filtration using tubular ceramic membranes.
Lucas, R.H. (2020) Workflow improvement by artifact development.
Marsman, B. (2020) Analysing machine learning algorithms to automate a decision making process.
Menningh, C.R. (2020) Using dual-sourcing for ordering spare components.
Moejes, D.S. (2020) A new simulator for training off-pump coronary bypass surgery.
Nieuwmeijer, L.F. (2020) Using Mixed Integer Linear Programming for providing insight into structural improvements in the production planning process at a food production company.
Oosterhout, J.J. van (2020) Kan DIEP korter? Route naar mogelijkheden voor reductie van ligduur van de DIEP procedure in Ziekenhuisgroep Twente.
Peraki, Lydia (2020) Towards a climate-neutral wastewater treatment plant in Leeuwarden.
Potters, E.M. (2020) Standardization of cleaning practices in a growing food supplement wholesaler.
Quak, Remi (2020) Process Mining in Healthcare: Gaps between protocol and clinical practice of critical side findings in radiology.
Rotteveel, Dorte (2020) Towards a faster scheduling workflow: A research on how to reduce the time taken to schedule advisors in Visitour at Geas Energiewacht.
Schrader, A.H. (2020) Production planning of the 3PC department at Trivium Packaging.
Slutter, C.P.E. (2020) Devising an inventory control system for an assembly line at Mainfreight.
Smeekes, B. (2020) Decision support for barge planning at Combi Terminal Twente.
Smet, Joep de (2020) Optimization of the tactical allocation of resource capacities at an academic animal hospital.
Snoeijink, B.D.A. (2020) Production process improvement of dredger hardware.
Stiphout, A.J. van (2020) Comparison of Scheduling Methods for Different Cases of a Complex Flexible Job Shop Problem.
Super, I. (2020) A standard approach for the flow re-engineering process of Company X.
Tavenier, N.M. (2020) Tekst classificatie als automatisering bij de analyse van open begrotingen.
Temmink, Wout (2020) Assessing the impact of variability on the performance of the X production line.
Toebes, I.W. (2020) Implementation and effect analysis of video consultation in a Dutch hospital.
Veldhuis, N. (2020) The impact of an increased frozen scheduling interval on the supply chain of HEINEKEN Netherlands Supply.
Velthuis, J.D.G. (2020) Developing a data-analysis dashboard for Forque.
Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.
Villavicencio Arzola, P.O. (2020) Primary interactions between cellulose and lignin during fast pyrolysis of lignocellulosic biomass.
Vries, C.R. de (2020) Optimizing the salt stream to eliminate the emergency route.
Vriezekolk, B. (2020) Optimization of the inbound supply chain for small sized materials with low demand.
Weesie, V. (2020) Preventing a third work shift during peak demand at the multi-model circular conveyor belt of Power-Packer Oldenzaal.
Wolff, T. de (2020) A new production planning strategy for Ovimex.
Zwanenburg, M.S. (2020) Improvement of the picklist process for the logistical centre of Kolb.
2019
Ankersmit, D.K. (2019) Analysing and optimizing the assembly process of LFE packages at Bronkhorst High-Tech b.v.
Avci, Ö (2019) A study to examine the importance of forecast accuracy to supply chain performance: A case study at a company from the FMCG industry.
Bemthuis, T.J. (2019) Dynamic three-dimensional resource space allocation in a multi-item inventory environment.
Berkel, A.R.R. (2019) Integration of clinical decision support systems in Dutch radiology departments.
Boerrigter, T.H. (2019) Increasing the throughput at insulating and degassing medium voltage cables.
Boersen, N. (2019) Digital billboard damage detection using computer vision.
Boogert, S.E. (2019) Redesign of the planning strategy.
Breed, I (2019) Hierarchical forecasting of engineering demand at KLM Engineering & Maintenance.
Brinkhuis, R.E. (2019) Designing an improved production process layout for BR Products.
Bröker, D. (2019) Controle is goed, vertrouwen is beter? : Relatiebeheer tussen opdrachtgevers en opdrachtnemers bij een gemeentelijke organisatie.
Buter, R. (2019) Minimizing travel time in a Neonatal Care Network.
Cornelissen, J. (2019) Optimalisatie van de productieplanning : onderzoek naar het verschil tussen realisatie en planning.
Dijkstra, S.H. (2019) Optimalisatie en inrichting van het toekomstige MIM proces.
Eversmann, H.Y.N. (2019) Computation offloading of augmented reality in warehouse order picking.
Gielbert, T.B. (2019) Improving cross-disciplinary information exchange using a central project database.
Gouweloos, F.A. (2019) Quality and efficiency within radiology and the added value of a regional PACS.
Harmsma, W.H. (2019) The effects of stocking configurations in industrial symbiotic networks : an agent-based simulation study.
Heijs, Wouter (2019) The design of an expert profile and the availabilty of employee expertise sources.
Heijs, É. G. S. G. (2019) Design of an Integrated Long Distance Transportation, Ordering and Inventory Quantity Optimization Tool.
Hubert, André (2019) AI-Enabled Automation : A Framework for Identifying a Company’s Automatable Core Processes.
Huiden, J.E. (2019) Generating Realistic Ghost Fingerprints by Combining Real Fingerprint Images.
Hulshof, S.R. (2019) Creating a more efficient flow of goods within the warehouse, through the improvement of storage and order picking.
Huttinga, S.S.J. (2019) Procesautomatisatie door middel van object detectie, een machine-learning ontwikkelingsmethodologie.
Jafarzadeh Esfahani, Mahdad (2019) Minimal sensing of quality of upper-limb movements.
Jakel, Tibor (2019) Using Sentiment Data from the Global Database for Events, Language and Tone (GDELT) to Predict Short-Term Stock Price Developments.
Keppels, E.H. (2019) Dynamic product routing in a hybrid flow shop.
Klaassen, W. (2019) Visualizing ocean carrier performance : a framework for evaluating logistic partners.
Kloppenburg, G.W. (2019) The adoption of intelligence amplification in the slotting process : a case study in the data validation automation of a Dutch Retailer.
Kortenhorst, N.J. (2019) Improving the internal sequencing logistics at Scania Production Zwolle.
Kroep, S. (2019) Application of Adaptive Large Neighbourhood Search for a Rich and Real-World Vehicle Routing Problem.
Lok, Edwin (2019) Identifying the Economic Performance of Heat-Based Industrial Symbiosis Networks : A Simulation Study.
Meer, Tom Q. B. van der (2019) Improving the factory efficiency of Bottling Line 2.
Meijer, T.G.J. (2019) Providing an insight into digital drawing technologies: Visualizing the costs and benefits using dashboards.
Nijkamp, D.M. (2019) Data gathering method to measure the effects of resource input on the production process.
Oldemaat, T.A.B. (2019) Improving the Internal Big Volume Transport Logistics at Bosch Thermotechniek Deventer.
Ooms, L.A. (2019) How can we cure the care sector? : optimization of the health care logistics of Ambiq for the benefit of their clients.
Oude Vrielink, MSc Jordy (2019) Valuable waste flows at company X : matching administrative and physical flows to improve their accountability and traceability.
Overmars, C.C. (2019) Production line improvement at Bosch Thermotechniek.
Pazos Urrea, Monica (2019) Concentration and Esterification of Lactic Acid in Complex Coacervates.
Platenkamp, T.J.W. (2019) The impact of a new filling line : a multi-scenario discrete event simulation at Company X.
Plomp, B.I. (2019) A bottleneck analysis to increase throughput at Apollo Vredestein B.V.
Postma, G.J.J. (2019) Improving the throughput time of the service department at AKOR BV.
Rensen, J.J. (2019) Reducing the throughput time of product A: by improving planning and control.
Richter, N.G. (2019) Process mining in programming game logs to differentiate between skill levels.
Rijst, J.C. van der (2019) The assignment of clinical departments to wards.
Rikken, T.W. (2019) New journey to reduce cost of inventory.
Salomons, Tim (2019) Item availability restricted.
Schepers, P. (2019) Application of a process model to define potential operational functional failure conditions.
Schoon, A.L. (2019) Multi-Criteria Decision Support for Transportation Network (Re-)Design at Outbound Logistics, Tata Steel Europe.
Schrader, I.M.W. (2019) Process Design of the Flexarm Assembly Line at VDL ETG Almelo.
Snaterse, M. (2019) Well-defined Data in a Production Planning Context.
Sparrius, T.L. (2019) Analysis and improvement of the new product introduction centre of Company X using key performance indicators.
Sparrius, T.L. (2019) Analysis and improvement of the new product introduction centre of Company X using key performance indicators.
Spijkerboer, E. C. (2019) Blockchain based transaction processing system : a reference architecture for an integrated blockchain based transaction processing system.
Staring, R.J. (2019) Cross-project collaboration in the Construction Sector : a 4C Control Tower for Construction Supply Chains.
Tijhuis, A. (2019) Improving the inventory control policy of TenCate Grass.
Tjeerdsma, S. (2019) Redesign of the AutoStore order processing line.
Veldwijk, G.J. (2019) Exploring Characteristics of an Employee Engagement App.
Veneklaas, W. (2019) Decision support for design, implementation, and feasibility of an admission lounge.
Vermaas, Alicia (2019) A product development success? : Providing insights in improvement of industry's product development maturity.
Vermeer, M. (2019) Interface trap density extraction from the subthreshold slope of FDSOI devices.
Vetkamp, M.E. (2019) Productiviteitsverbetering voor een sociaal werkvoorzieningsbedrijf.
Visser, BSc Jedidja (2019) Optimalisatie van medicatiebeschikbaarheid met behulp van risicoanalyse en simulatiestudie.
Voorwinden, D.L. (2019) Reducing waste of chocolate spread generated during production at Brinkers Food B.V.
Wichink, R.H.J. (2019) Improvements in Production Layout and Internal Logistics.
Wienk, Ruben (2019) Integrating a warehouse management system : a feasibility study.
Wijnands, M.P.J. (2019) Op welke manier kan bij stationsprojecten het programma van eisen zorgen voor een integrale aanpak omtrent de transferfunctie?
Zwiers, R.J. (2019) Determining the optimal warehouse location.
2018
Benthem, T.S. van (2018) Visualizing business performance : real-time BI-dashboards.
Berghuis, Olivier (2018) Improving the management process of work instruction documents.
Bergman, M.M.G. (2018) Optimizing a production line : a simulation study.
Beukel, Daniël Johannes van den (2018) Thesis urenregistratie proces.
Casteleijn, T.K. (2018) Start-up knowledge brought to large organisations : Innovation management software based on blockchain technology.
Dubbink, G.H.C. (2018) Optimalisatie van het MIM proces bij Demcon.
Harmsen, M.J. (2018) Improving the internal control system at Company X : a qualitative approach.
Hemmelmann, J.H. (2018) Validity of the EDA-Explorer as a means for artifact rejection and peak detection in electro dermal activity data-analysis.
Hiddinga, A.K. (2018) Decision support for matching import and export flows of hinterland container transportation: Teubooker hinterland.
Hofma, Phylicia (2018) The introduction of risk management within Company X.
Ingen, F.P. van (2018) Optimalisatie op de vulkanisatieafdeling in de bandenindustrie : onderzoek naar een beslissingsmodel voor het onderhouden en vervangen van vulkanisatiepersen.
Joore, Eveline (2018) Better in, better out: een businesscaseframework voor darmkankeroperaties in het Medisch Spectrum Twente.
Kambartsumjan, Arthur (2018) Optimizing the process of nitrite measurement.
Kamphuis, E.P. (2018) Planning at Polder Valley : redesigning the planning process through qualitative research.
Korpershoek, L.C. (2018) Improving the receiving processes at Hamifleurs.
Koster, F.F.J. (2018) Improving the inbound goods operation at Company X.
Kruijff, O. de (2018) Using additive manufacturing for rapid tooling of obsolete spare parts in the aerospace industry.
Lammerink, L. (2018) Lean optimalisatie binnen een distributieproces.
Lippok, B. M. (2018) Optimizing the surgical patient flow in a German Hospital.
Maljaars, M. (2018) Planning op de dagbehandeling : interventies voor zowel korte als lange termijn in de huidige planningsmethode, zodanig dat er een betere match is tussen vraag en aanbod.
Medendorp, L.A. (2018) Optimalisatie van het voorraadbeheer van de montagelijnen : het elimineren van verspilling op de afdeling magazijn bij HP Valves.
Nijenkamp, B. (2018) Designing the inbound warehouse process.
Noteboom, G.N. (2018) Procesoptimalisatie door IT-artefacten : het verhogen van de bezettingsgraad van de warmhoudkamers bij Tata Steel IJmuiden.
Oude Nijhuis, K.A. (2018) Monitoring and controlling critical process parameters at the retort production line of Abbott Zwolle.
Petter, J. (2018) Procesbeheersing door Single Piece Flow : de implementatie bij de pneumatisch bediende afsluiters.
Pijnappel, B.T.A. (2018) Master thesis, optimizing the reverse process of PostNL pakketten.
Pinxteren, V.A. van (2018) A supporting instrument for reflection based activities in higher education : achieving more potential through reflection.
Ploeg, A.G. (2018) Planning van longpatiënten onder de loep genomen. Bachelor opdracht: objectieve analyse van de patiëntenplanning op de afdeling longgeneeskunde in het Deventer Ziekenhuis.
Poortema, K. (2018) Transport binnen het productieproces : de optimalisatie van routes van afsluiters op de werkvloer bij HP Valves.
Rasing, A (2018) Automation and increased use of carrier data to improve the process of ocean carrier selection.
Remmelink, M. (2018) Improving the MRP of Nedap Retail.
Rusch, Nina (2018) Optimizing and Implementing the Inventory Control Policy of Finished Products within Bolletje’s ERP System.
Schaik, L.A.W.F.J. van (2018) Assessing operational excellence and decisive factors to support performances of hospitals departments.
Tas, J.G.A. van der (2018) Improving the container planning (process), by means of a planning tool.
Tenhagen, Cyrelle (2018) Increasing space efficiency within a Vertical Lift Module at Benchmark Electronics, Inc.
Teunissen, J. (2018) Improving production planning by flow shop scheduling algorithms : A case study at ForFarmers.
Valk, C.M.S. van der (2018) Een scenariomodel voor Bouwmaat : de financiële gevolgen in de supply chain.
Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.
Vriezekolk, Björn (2018) Grip op het materieel : meer inzicht in de prestaties van het materieel met behulp van KPI's, VBA & een nieuwe manier van tarievering.
Westerink, Milan (2018) Optimization of MSTpPlaster rooms : a simulation Study.
Weustink, T. (2018) Het reduceren van afsteltijd ten gevolge van ombouwen.
Zadelhoff, L.D. van (2018) Het ontwerp van een hoog-automatische productielijn.
Zwier, P.J. (2018) Analyse en optimalisatie van een kittingproces.
2017
Barends, M.G.H.W. (2017) Improving order fulfilment of intermediate core products.
Beek, Jaro van der (2017) Analyseren en optimaliseren van de verkoopprocessen.
Bode, M. S. P. (2017) How to Design an Interactive Installation for Concordia.
Broekhuijsen, T.K. (2017) Schoonmaak binnen het MST : een simulatiestudie.
Draijer, E.M. (2017) The allocation of patients to hospitals in case of a disaster.
Ergecer, Fatma (2017) Usability of a new eHealth Monitoring Technology (HELMA) that reflects health care needs for Clients with Cognitive Impairments and their (In) Formal Caregivers.
Essenstam, L. (2017) Cognitive computing for the hospitality industry : A research as regards to the implementation of cognitive computing in business processes.
Hoeksema, V.L. (2017) 3D Transient and crystallization model for laser assisted tape Winding.
Hoogterp, H. (2017) Crop harvesters feed us, but how do we feed them?
Kaptein, R (2017) Het verminderen van afkeur bij composiet producten.
Mok, S. (2017) Passive removal of electrochemically produced hydrogen gas in a microfluidic device.
Murti, G.W. (2017) The effect of ethanol/water on lignocellulosic biomass and cellulose liquefaction.
Nab, F. (2017) Analyse en optimalisatie van het maaltijdserviceproces.
Nijholt, Matthijs Haijo (2017) Een onderzoek naar het toekomstige wagenpark voor de huisafvalinzameling van Remondis Dusseldorp.
Putten, F.M.J. van der (2017) Supply Chain Network Redesign.
Schellevis, H.M. (2017) The effect of membrane topology features on ion transport phenomena.
Snijders, T.G.A. (2017) Redesigning a food assembly process at KLM Catering Services.
Thomasson, S.A. (2017) Improving forecast performance of LPG demand.
Timmerhuis, N.A.B. (2017) Two (L-L) and three (G-L-L) phase extraction processes in capillaries with heterogeneous surface wettability.
Timmermans, Seine Bert (2017) Determining a 3D position inside a ship during construction and communicating the position to CAD software.
Velt, Eva (2017) The Robot Facebook: The field spotters guide of Robots.
Voetdijk, N.J. (2017) Een model voor de productiekwaliteit van bedrijf X.
Wentzel, S.J. (2017) Improving warehouse layout design : A study to optimize the warehouse of the hospital of Aruba.
Wichink, R.H.J. (2017) Een simulatiestudie naar de verbetering van het werkvloergebruik bij VMI Holland BV.
Wielstra, L.M. (2017) Managing Information Within the Three Lines of Defense to Ensure Valid Audit Trails - Financial Sector - A Practical Organizational Framework.
Witsen, O.N.C. (2017) Het reorganiseren van het intern transport bij Fokker.
Zomerdijk, J. (2017) Een onderzoek naar de afvalstromen van een productieproces.
2016
Balasingham, K. (2016) Industry 4.0: Securing the Future for German Manufacturing Companies.
Balkay, A. and Buursink, E. H. and Deniz, Y. (2016) Evaluatie zorgcomplex De Botterhof – Wierden : een casestudy op gebied van zorgregelgeving, zorgconcepten en zorgarchitectuur.
Beek, E.A.G van (2016) Analyse implementatieproces ERP systeem Bedrijf X.
Berge, B.B.G. ten (2016) Hoe haalbaar is een tijdige levering van het Bedieningsvoorschrift?
Berghuis, D.P.J. (2016) LEAN manufacturing in de elektro assemblage.
Boeve, B. (2016) Optimization of the inbound process at Wavin NL : Dealing with variability from dock to stock.
Bossink, K. (2016) Het verbeteren van het order management proces bij Rapide International B.V.
Brummelhuis, Bob (2016) Coping with Variability: Improving the Inbound Process of the VMI Holland Warehouse.
Bussche, J.W. van den (2016) Analyse en optimalisatie van een verzendprocedure.
Dofferhoff, A. (2016) Hollen en stilstaan : het onderzoeken van verschil in werkdruk op de kliniek.
Fennis, J.A. (2016) Processen & strategie : Hoe Wolfskamer Wintersport een hoger bedrijfsresultaat kan halen.
Heijndijk, J.J (2016) Performance analysis of New Assets projects at TenneT: A scenario-based simulation study.
Heijnen, W.J.P. (2016) Optimizing OR scheduling for the ophthalmology department.
Hermsen, J.B (2016) Enhancing employee engagement and productivity in podiatry health care.
Hessels, Stefan (2016) Bridging the gap : from process mining to business process simulation.
Hoekman, R. (2016) Een onderzoek naar een alternatief voor de papierstroom bij Sealed Air, Diversey Enschede.
Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.
Keppels, E.H. (2016) Taking control of the after sales - The design of a supply chain control tower, which will help Thales by improving the supply chain visibility of their new type of after sales service.
Meijndert, Nicky (2016) Op weg naar een voordeliger lasproces.
Merrienboer, I.A.A.F. van (2016) Reducing production lead time at Zodiac Galleys Europe.
Nieuwenhuizen, D.B. van den (2016) eHealth in the preventive child health care: empowering the ‘hard to reach’ parents in the preventive child health care via persuasive eHealth technology.
Olde Meierink, A.H.R. (2016) Research to practice gap: A qualitative study into the use of visualisation when implementing a new technology.
Rusch, Nina (2016) Analysis of the filtration process at a beer brewery.
Salomons, T. (2016) Een basis voor continu verbeteren bij AWL.
Scholten, Peter (2016) Efficiency analysis and improvement of the canning line at Grolsch.
Soltani, F.H. (2016) Optimizing processes at the spare parts warehouse Of Port Elizabeth.
Teunissen, Jeroen (2016) RFID en zoeken : een haalbaarheidsstudie naar RFID en hoe zoeken te verminderen.
Veldhuis, Nicole (2016) Miniload of niet? : onderzoek naar de haalbaarheid van een mogelijke implementatie van Miniload binnen VDL ETG Almelo.
Wang, Yuchen (2016) Project portfolio management using capability- based planning.
Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.
Wit, N. de (2016) Development of a Reliable Prediction Method for Urgent Infra-Failure Recovery Times at ProRail B.V.
2015
Adriaansen, A.M.A. (2015) Balancing inventory and equipment contingencies by a flexible semiconductor supply chain simulation model.
Barneveld, M. (2015) Planning of external logistics for Deventer Hospital.
Boersma, T. (2015) Evaluating the two-table surgery policy : an alternative policy to improve operating room performance.
Brand, M. (2015) Recognition of metal cations with surface immobilized crown ether functionalized poly(ferrocenylsilane).
Buil, J.H. (2015) Defining and improving congruence between treatment plans and realization in rehabilitation care.
DEGELING, K. (2015) Item availability restricted.
Groeneveld, J. (2015) Reducing expectation and variability of manufacturing lead time by improving product quality : a case study at the company Teplast.
Hoek, W. (2015) Acuity Measurement at the Neonatal Intensive Care Unit.
Jutten, M.G. (2015) The Fit between Business Processes and Process Mining related Activities: a Process Mining Success Model.
Koster, L.J. (2015) Improving measuring and target setting for processes impacting customer service in a Fast Moving Consumer Goods company.
Louw, Joël (2015) Stapsgewijze uitbreiding van het subseakabelproductieproces bij TKF.
Matena, M.H. (2015) Public transport on demand : a better match between passenger demand and capacity.
Navruz, Gurkan (2015) Ontwerp, herontwerp en implementatie : het verbeteren van bedrijfsprocessen en informatiestromen voor een operationeel ondersteunend team.
Nazarian, A.A. (2015) Voorraadbeheeroptimalisatie van een retailer.
Nijenkamp, B. (2015) Het inrichten van een efficiënt logistiek proces van poliklinische monsters.
Panman de Wit, J.S. (2015) Onderzoek naar de efficiëntie en groei van PB International.
Politiek, F.J.J. (2015) Improving the scheduling of Aircraft Service tasks at KLM Aircraft Services.
Quint, C.J. (2015) Towards a synchronized coordination in the supply chain of Production Chemicals.
Ruth, F.J. van (2015) Improving problem detection and focus for root-cause analysis through case-based reasoning and group decision support systems.
Smit, F.C. (2015) Integral planning of operating rooms and wards : Tactical allocation of beds to reduce fluctuations in bed utilization for Medisch Spectrum Twente.
Snijders, T.G.A. (2015) Het ontwerpen van een nieuw kostprijsmodel voor de onderdelen bij Bedrijf X.
Son, M. van (2015) ERP as a driver for strategic purchasing redesign : a case study at Gelre hospitals.
Spijkerman, V. (2015) The design of a Business Intelligence application to control hospital funding in The Netherlands.
Stevens, S. (2015) De invloed van additieven en stroomdichtheid op de koperdistributie bij het galvaniseren van through holes in printplaten.
Strijker, V. (2015) Using simulation for a new production line at Philips Drachten.
Timmerhuis, N. (2015) In-situ characterization of thin layer polysulfone in water-toluene mixtures.
Timmerman, M. (2015) Rapid exfoliation of layered metal-oxides.
Trentelman, E. (2015) Resource capacity planning of a spinal injury rehabilitation care unit.
Veijer, J (2015) Analytical model of a mold dependent production line: Applied to future thermoplastic skin panel production for Gulfstream G650 tail wings.
Wisse, T.C. (2015) Het verleggen van het klantorderontkoppelpunt voor conventionele producten bij Koninklijke Verpakkingsindustrie Stempher BV.
Zeeburg, R.B.T van (2015) Item availability restricted.
Zwieten, Ralph van (2015) Debottlenecking bij FrieslandCampina Domo Borculo.
2014
Belshof, Bart (2014) Item availability restricted.
Boerdonk, R.A.C. van (2014) Improving the performance of production line 4 at Mars - Bachelor thesis 'Industrial Engineering and Management.
Brummelkamp, L.M. (2014) Aligning the return operations of warranty parts through customer segmentation.
Demkes, K.H. (2014) Automated tuning of an algorithm for the vehicle routing problem.
Dijcks, A. (2014) Improving the flow of parts in the distribution centre operated by a global logistic service provider.
Dijk, T.G. van (2014) Tuning the Parameters of a Loading Algorithm.
Engbersen, P. J. F. (2014) Onderzoek naar de meest geschikte productdrager voor de Proline Nxt productielijn.
Forlingieri, Marco (2014) Platform planning and design for rail rolling stock: An exploratory study of platform development within Bombardier Transportation.
Geertjes, F. (2014) A first step towards fully automated spare parts planning systems - An empirical study on ordering behaviour.
Glerum, Arvid Joran (2014) Minimising variation in hospital bed demand by improving the operating room planning.
Pol, M.J. (2014) Improving the continuous flow - Increasing the performance at Packaging Line 51 at Heineken.
Schipper, Ruurd de (2014) The usefulness of IT innovation classification for business model innovation.
Schreuder, N.W. (2014) Maximizing flexibility through minimizing changeover time.
Valk, J.P. van der (2014) Towards efficient distribution of local agricultural products : implementing a logistic framework at PuurDichtbij.
Veneberg, R.K.M. (2014) Combining Enterprise Architecture & Operational Data To Better Support Decision-Making.
Vreriks, S.F. (2014) Structuur: een middel naar succes.
2013
Koeijer, B.L.A. de (2013) Cradle to Cradle Packaging Development: Method | Case Study.
2012
Haase, A.S. (2012) Transport over a bubble mattress : the influence of interface geometry on effective slip and mass transport.
Poppelen, Daniël van (2012) The influence of in-plane miscut on the surface morphology of annealed DyScO3 (110) substrates.
Straathof, Paul (2012) Botonderzoek: het ontwerpen van een meetopstelling waarmee de temperatuursveranderingen in het corticale botweefsel van een pijpbeen dat geruimd wordt, gemeten kunnen worden.
2011
Bos, Frans (2011) Torrefaction gradients in biomass.
Koeijer, B.L.A. de (2011) Duurzaamheid duurt het langst. Een onderzoek naar duurzaamheid binnen Attema B.V.
Schagen, M.V. van (2011) Item availability restricted.
2006
Holtkamp, M. (2006) Public services integration and interoperability : the use of an Enterprise Service Bus to facilitate Service-Oriented Architecture in a public environment.