University of Twente Student Theses

Essay

Abbink, R.J.C.M. (2021) Optimizing operations at an orthopaedic hospital. Forecasting patient distributions and implementing strategies.

Adriaansen, A.M.A. (2015) Balancing inventory and equipment contingencies by a flexible semiconductor supply chain simulation model.

Akgül, E. (2021) Improving inventory management through demand forecasting at Bronkhorst High-Tech.

Albertsboer, E.E. (2023) Planning and scheduling for animal shelters.

Aleksandrov, A. (2022) Evaluating the sustainability of a technology by performing a supply chain analysis.

Alves da Silva, Sarah (2022) Knowledge Management System Design For An Agile Digital Agency : The Case Of El Niño B.V.

Aminian, Roozbeh (2020) Wat-IF : decision-support tool for sustainable wastewater treatment plants in the Netherlands.

Andrei, Luca (2024) Test Quest : Improving the onboarding experience for novice Dungeons and Dragons players through personalised AI-generated content.

Ankersmit, D.K. (2019) Analysing and optimizing the assembly process of LFE packages at Bronkhorst High-Tech b.v.

Antvelink, S.E. (2022) Optimisation of a software development process.

Apriyandi, Dimas (2024) A Smart Tourism Platform Reference Architecture for Developing Countries.

Arends, Simon Daniël (2020) Quantity meets quality for mined process models through simulated events.

Arens, B.G.J. (2023) Analysing the production waste at a printing company.

Assink, J.G. (2022) Estimating workload through forecasting and monitoring processing times.

Avci, Ö (2019) A study to examine the importance of forecast accuracy to supply chain performance: A case study at a company from the FMCG industry.

Azani, Maryam (2020) Supply Chain Control Tower Reference Architecture for Exception Monitoring and Real-Time Incident Management.

Balasingham, K. (2016) Industry 4.0: Securing the Future for German Manufacturing Companies.

Balha, A. (2023) Increasing fuelling capacity of hydrogen trains while minimising costs at Provincie Groningen : Designing hydrogen fuelling infrastructure in railway.

Balkay, A. and Buursink, E. H. and Deniz, Y. (2016) Evaluatie zorgcomplex De Botterhof – Wierden : een casestudy op gebied van zorgregelgeving, zorgconcepten en zorgarchitectuur.

Barends, M.G.H.W. (2017) Improving order fulfilment of intermediate core products.

Barneveld, M. (2015) Planning of external logistics for Deventer Hospital.

Becks, M.B. (2021) Implementation of MES at small EMS providers.

Beek, E.A.G van (2016) Analyse implementatieproces ERP systeem Bedrijf X.

Beek, J.J.W. van der (2020) A Method for Combining Agile, Internal Control, and Stakeholders' Needs.

Beek, Jaro van der (2017) Analyseren en optimaliseren van de verkoopprocessen.

Beeldman, Sander (2020) The automation of the material handling process at company X.

Behrendt-Richter, Luis Matthias (2023) An exploratory study using text mining methods to investigate online therapists' feedback texts for the use of empathy.

Belshof, Bart (2014) Item availability restricted.

Bemthuis, T.J. (2019) Dynamic three-dimensional resource space allocation in a multi-item inventory environment.

Benneker, Bram G. (2021) Development of a Cost Price Model to Support Bid Price Estimation.

Benthem, T.S. van (2018) Visualizing business performance : real-time BI-dashboards.

Berge, B.B.G. ten (2016) Hoe haalbaar is een tijdige levering van het Bedieningsvoorschrift?

Berghuis, D.P.J. (2016) LEAN manufacturing in de elektro assemblage.

Berghuis, Lars (2021) Using the Wisdom of the Crowd to Digitalize : Designing a workshop-based process selection method for the identification of suitable RPA processes.

Berghuis, Olivier (2018) Improving the management process of work instruction documents.

Bergman, M.M.G. (2018) Optimizing a production line : a simulation study.

Berkel, A.R.R. (2019) Integration of clinical decision support systems in Dutch radiology departments.

Beukel, Daniël Johannes van den (2018) Thesis urenregistratie proces.

Beurs, J.A. de (2022) Decreasing the time spent on administrative actions in the scheduling process of TenCate Geosynthetics.

Bloemendaal, J.A.E. (2023) Improvement of the customer order fulfillment process.

Blok, J.E. (2024) Digital Product Passports : Increasing Transparency in the Fashion Industry.

Bode, M. S. P. (2017) How to Design an Interactive Installation for Concordia.

Boekee, F.S.C (2023) Improving the alignment of the AGRI production process at Apollo Tyres Ltd.

Boekhoudt, Daan Fokko (2023) Variation reduction through PMC integration and evaluation.

Boerdonk, R.A.C. van (2014) Improving the performance of production line 4 at Mars - Bachelor thesis 'Industrial Engineering and Management.

Boerrigter, T.H. (2019) Increasing the throughput at insulating and degassing medium voltage cables.

Boersen, N. (2019) Digital billboard damage detection using computer vision.

Boersen, N. (2023) Optimizing Resource Allocation for Outpatients : Machine Learning-Based Length-of-Stay Predictions and Patient Scheduling.

Boersma, T. (2015) Evaluating the two-table surgery policy : an alternative policy to improve operating room performance.

Boeve, B. (2016) Optimization of the inbound process at Wavin NL : Dealing with variability from dock to stock.

Bogt, J.H.W. ter (2021) The influence of consolidation on bending behaviour of molten unidirectional fiber reinforced thermoplastic tapes.

Bon, X.T.M. (2022) Humanitarian Drone Logistics after a flooding event : assessing the effects cargo drones can have on relief operations.

Boogert, S.E. (2019) Redesign of the planning strategy.

Boomers, J.T.W. (2022) Improving the medium-term and short-term production planning process of semi-finished products at a cable manufacturing company.

Borggreve, P.J.P. (2022) Designing a Cash-Flow Model to assess Service Requests.

Borren, J. (2022) Supporting an agile working environment for the Information Provision Department at Menzis.

Bos, Maxim (2021) Improving production performance.

Bos, Maxim (2023) Continuously optimizing business process using process mining.

Bos, N.D (2021) Improving the Chess Elo System With Process Mining.

Bosch, Y.J. (2019) Multi-Kettle Beer Brewing : Production planning at Hops & Grains. Researching the viability of the “Second Craft beer Revolution” through simulation of production processes.

Bosscher, F.D. (2023) Developing a shipment forecast for carriers, by incorporating uncertainty factors through the utilization of machine learning methods : Research for creating a shipment volume forecast for the overseas carriers and freight forwarders.

Bossink, K. (2016) Het verbeteren van het order management proces bij Rapide International B.V.

Brand, M. (2015) Recognition of metal cations with surface immobilized crown ether functionalized poly(ferrocenylsilane).

Breed, I (2019) Hierarchical forecasting of engineering demand at KLM Engineering & Maintenance.

Brink, H.A. (2024) An introduction of a structured business process, making the RTS composition process structured and data-driven.

Brinkhuis, R.E. (2019) Designing an improved production process layout for BR Products.

Broekhuijsen, T.K. (2017) Schoonmaak binnen het MST : een simulatiestudie.

Bruin, F.H.J. de (2021) Self-organizing logistics in container hinterland planning : a case study at Combi Terminal Twente.

Brummelhuis, Bob (2016) Coping with Variability: Improving the Inbound Process of the VMI Holland Warehouse.

Brummelkamp, L.M. (2014) Aligning the return operations of warranty parts through customer segmentation.

Bröker, D. (2019) Controle is goed, vertrouwen is beter? : Relatiebeheer tussen opdrachtgevers en opdrachtnemers bij een gemeentelijke organisatie.

Buil, J.H. (2015) Defining and improving congruence between treatment plans and realization in rehabilitation care.

Buitenhuis, Kilian F. (2022) Optimising the OPCAB simulator movement mechanism.

Buiteveld, J. (2021) Techno-economic evaluation of a novel biomass pyrogasification process with an integrated sorption-shift system : a process for the conversion of waste to high-quality biochar and hydrogen with carbon capture and hydrogen upgrading.

Burg, Sascha (2020) Designing an app prototype for employee business travel using value-based requirements engineering.

Bussche, J.W. van den (2016) Analyse en optimalisatie van een verzendprocedure.

Buter, R. (2019) Minimizing travel time in a Neonatal Care Network.

Casteleijn, T.K. (2018) Start-up knowledge brought to large organisations : Innovation management software based on blockchain technology.

Chalan, Ghusen Nabil (2024) Developing Objective Comparison Evaluation Framework for Comprehensive IaaS Assessment Using the AHP Method.

Cijffers, C.J. (2021) Productivity in the transport hall.

Cijffers, Carmen Julia (2024) Improving the Occupancy Rate in the Distribution Center by Developing a Material Handling System Optimization Approach.

Cornelissen, J. (2019) Optimalisatie van de productieplanning : onderzoek naar het verschil tussen realisatie en planning.

Cârcoană, Sebastian (2020) Assessing the implementation of ultrafiltration in a Brazilian kraft pulp mill.

DEGELING, K. (2015) Item availability restricted.

Dam, I.E. van (2020) The redesign of the inbound exception process.

De Porto, T.C.S. (2024) Estimating the workload through the analysis and monitoring of processes and their durations at the GEO-Team of the Municipality of Enschede.

Defize, D.R. (2020) Developing a Maturity Model for AI-Augmented Data Management.

Dekker, K.J. (2020) Maintenance Optimization Through predictive Maintenance: A Case Study For Damen Shipyards.

Demkes, K.H. (2014) Automated tuning of an algorithm for the vehicle routing problem.

Derkink, T. (2021) An insight in the planning of the maintenance process of wheel axles at Nederlandse Spoorwegen.

Dieren, W.M. van (2022) Lead Time Reduction, from forecasted to reactive assembly.

Dijcks, A. (2014) Improving the flow of parts in the distribution centre operated by a global logistic service provider.

Dijk, T.G. van (2014) Tuning the Parameters of a Loading Algorithm.

Dijkstra, S.H. (2019) Optimalisatie en inrichting van het toekomstige MIM proces.

Dijkstra, BSc S.H. (2021) Bright Beer Cellar planning and scheduling at Heineken.

Dofferhoff, A. (2016) Hollen en stilstaan : het onderzoeken van verschil in werkdruk op de kliniek.

Dollenkamp, S.J. (2024) Optimizing the Changeover Process for the Production on Jacketing Line 2 at TKF.

Dongen, J.A. van (2020) Reducing the throughput time at machine-builder X.

Dort, D.J.A. van (2020) Changing webshops as we know them : supporting customers to be in control.

Draijer, E.M. (2017) The allocation of patients to hospitals in case of a disaster.

Dubbink, G.H.C. (2018) Optimalisatie van het MIM proces bij Demcon.

Dulfer, Simone (2024) Towards the realisation of self-aligned nanometre scale tunnel field effect transistors.

Egberink, J.T. (2020) Optimizing the processing of purchasing invoices.

Engbersen, P. J. F. (2014) Onderzoek naar de meest geschikte productdrager voor de Proline Nxt productielijn.

Enkhuizen, M.J. van (2021) Innovative Data sharing in logistics, migrating from UN/EDIFACT to the OpenTripModel.

Ergecer, Fatma (2017) Usability of a new eHealth Monitoring Technology (HELMA) that reflects health care needs for Clients with Cognitive Impairments and their (In) Formal Caregivers.

Ergle, Ruta (2023) Enabling the eCMR signing process by implementing e-signature software for Vervo.

Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.

Essenstam, L. (2017) Cognitive computing for the hospitality industry : A research as regards to the implementation of cognitive computing in business processes.

Eversmann, H.Y.N. (2019) Computation offloading of augmented reality in warehouse order picking.

Feddema, J.B. (2021) Optimising the data acquisition and data delivery of the WenS process at ProRail.

Fennis, J.A. (2016) Processen & strategie : Hoe Wolfskamer Wintersport een hoger bedrijfsresultaat kan halen.

Forlingieri, Marco (2014) Platform planning and design for rail rolling stock: An exploratory study of platform development within Bombardier Transportation.

García Martínez, J.B. (2020) Study of water adsorption on an amine adsorbent for Direct Air Capture of CO2.

Geertjes, F. (2014) A first step towards fully automated spare parts planning systems - An empirical study on ordering behaviour.

Geerts, F.M.P. (2021) Optimizing the online customer journey of Sentio.

Gielbert, T.B. (2019) Improving cross-disciplinary information exchange using a central project database.

Glerum, Arvid Joran (2014) Minimising variation in hospital bed demand by improving the operating room planning.

Goor, P.B. van (2023) Analyzing operational risks of the Source-to-Pay process at Nedap N.V.

Gouweloos, F.A. (2019) Quality and efficiency within radiology and the added value of a regional PACS.

Graumans, Lisan (2021) Subpopulation Process Mining in the ICU for Patients Diagnosed with a type of Pneumonia.

Groeneveld, J. (2015) Reducing expectation and variability of manufacturing lead time by improving product quality : a case study at the company Teplast.

Groot, Emma (2023) Efficient Allocation of Midwives at the New Setup of the Emergency Medical Center at Medisch Spectrum Twente.

Groot, G.J.L. de (2022) Evaluative study on the maturity of Bender Groep's information systems utilization.

Groot, M.J.A. de (2022) Sustainability of the HVAC systems in the clinical operating room department.

Grootte Bromhaar, I.G.H. (2021) Improving the labour utilisation in the product finishing process.

Gupta, Pratyush (2024) A Comprehensive Study on Feature Detection Algorithms and Fine-Tuning Methods for Efficient Metadata Extraction in Construction Drawings.

Gülçay, Zehra (2024) Improving Master Data Governance Processes Within Supply Chain Management.

Haan, W.J. (2021) How can process mining be used to identify Robotic Process Automation opportunities?

Haase, A.S. (2012) Transport over a bubble mattress : the influence of interface geometry on effective slip and mass transport.

Haasewinkel, M. (2023) Improving the efficiency of the transfer press at Kvadrat High Performance Textiles.

Hagen, Quinziano ten (2022) Order Advancement in a Multi-Item Two-Echelon System: Theory and Case study.

Hankel, Zachary (2024) Trivializing Values with Dark Patterns : An ethical analysis of the use of Dark Patterns by social media platforms and their effect on personal and societal values.

Harmsen, M.J. (2018) Improving the internal control system at Company X : a qualitative approach.

Harmsma, W.H. (2019) The effects of stocking configurations in industrial symbiotic networks : an agent-based simulation study.

Harmsma, W.H. (2022) Automated detection of hidden failures in heating and photovoltaic systems of ‘Nul-op-de-meter’-housing Projects.

Havinga, J.R. (2020) Increasing the capacity in the current building of Niverplast.

Heij, J. de (2022) Using Discrete Event Simulation (DES) to improve productivity of Shell Ghent's grease manufacturing plant.

Heijndijk, J.J (2016) Performance analysis of New Assets projects at TenneT: A scenario-based simulation study.

Heijnen, W.J.P. (2016) Optimizing OR scheduling for the ophthalmology department.

Heijs, Wouter (2019) The design of an expert profile and the availabilty of employee expertise sources.

Heijs, É. G. S. G. (2019) Design of an Integrated Long Distance Transportation, Ordering and Inventory Quantity Optimization Tool.

Heitkamp, M.J.F. (2024) Lunar Water Extraction : Design, Optimization, and Development for Future Space Exploration.

Hemmelmann, J.H. (2018) Validity of the EDA-Explorer as a means for artifact rejection and peak detection in electro dermal activity data-analysis.

Hendriks, Koen (2020) The improvement of objective milkfoam quality analysis through image processing and computer vision.

Hermsen, J.B (2016) Enhancing employee engagement and productivity in podiatry health care.

Hessels, Stefan (2016) Bridging the gap : from process mining to business process simulation.

Hettema, V.L. (2023) Reducing the collection time of printing orders at Ipskamp Printing.

Heuvel, D.M. van den (2021) Data-driven logistics : improving the decision-making process in operational planning by integrating a supervised learning model.

Hiddinga, A.K. (2018) Decision support for matching import and export flows of hinterland container transportation: Teubooker hinterland.

Hoek, W. (2015) Acuity Measurement at the Neonatal Intensive Care Unit.

Hoekman, R. (2016) Een onderzoek naar een alternatief voor de papierstroom bij Sealed Air, Diversey Enschede.

Hoeksema, V.L. (2017) 3D Transient and crystallization model for laser assisted tape Winding.

Hoeven, S. (2022) Simplified trench-assisted surface channel technology for high-temperature microfluidics.

Hofma, Phylicia (2018) The introduction of risk management within Company X.

Holsbrink, G.R.B. (2021) The optimal allocation of casualties to hospitals in case of a mass-casualty incidence.

Holst, T.G.M. van der (2021) Turning data into value : determining which intelligent process automation technologies can be used to automate the process of ordering packaging at Company X.

Holstege, Nadia (2024) Design and optimization of a devulcanization process for butyl rubber.

Holtkamp, M. (2006) Public services integration and interoperability : the use of an Enterprise Service Bus to facilitate Service-Oriented Architecture in a public environment.

Hoogterp, H. (2017) Crop harvesters feed us, but how do we feed them?

Horn, D.M.J. van (2022) Process improvement using machine learning.

Horselenberg, J.J.A. (2020) Reducing the waiting times in the manual moulding department : a simulation study.

Horselenberg, Jelle (2023) Improving warehouse efficiency: A study of the KPIs and picking process at Benchmark.

Houten, Floortje van (2024) Improving the management of changes in the engineering-to-order environment at Company X.

Hubert, André (2019) AI-Enabled Automation : A Framework for Identifying a Company’s Automatable Core Processes.

Hugen, T.E. (2020) Curing plate problems : production schedule evaluation for assessing equipment availability.

Huiden, J.E. (2019) Generating Realistic Ghost Fingerprints by Combining Real Fingerprint Images.

Huitink, N.J. (2020) Workforce Prediction of Order Picking Personnel.

Hulshof, S.R. (2019) Creating a more efficient flow of goods within the warehouse, through the improvement of storage and order picking.

Huttinga, S.S.J. (2019) Procesautomatisatie door middel van object detectie, een machine-learning ontwikkelingsmethodologie.

Höner, Maike (2024) Optimizing train station inspection operations in the region of Magdeburg.

IJpma, C.F. (2023) Improving the delivery reliability from Company X to its customers by inventory optimization while limiting the increase in overall inventory value.

Idzes, J.E. (2024) Optimisation of the post-calculation process.

Ingen, F.P. van (2018) Optimalisatie op de vulkanisatieafdeling in de bandenindustrie : onderzoek naar een beslissingsmodel voor het onderhouden en vervangen van vulkanisatiepersen.

Irfan, Tekinerdogan (2022) Online platform for supporting the development of assistive technology tools for disabled people.

Jafarzadeh Esfahani, Mahdad (2019) Minimal sensing of quality of upper-limb movements.

Jakel, Tibor (2019) Using Sentiment Data from the Global Database for Events, Language and Tone (GDELT) to Predict Short-Term Stock Price Developments.

Jansink, J.F. (2020) Spare part stocking with service differentiation and compounded arrivals.

Jansma, W. (2022) Improving the productivity of cranes in the construction industry.

Jeurissen, S.G. (2023) Dairy side-stream valorization through the application of microbiological processes.

Jongejan, M.R. (2021) Introducing maintenance performance management at dairy producer X : managing the adaptation of preventive maintenance for the maintenance department.

Joore, Eveline (2018) Better in, better out: een businesscaseframework voor darmkankeroperaties in het Medisch Spectrum Twente.

Jutten, M.G. (2015) The Fit between Business Processes and Process Mining related Activities: a Process Mining Success Model.

Kalcheva, Y.K. (2023) Subpopulation process mining in health.

Kambartsumjan, Arthur (2018) Optimizing the process of nitrite measurement.

Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.

Kamp, S.A.M. (2020) Improving operating room utilization at Bergman Clinics: Evaluation of various surgery scheduling approaches using discrete-event simulation.

Kamphuis, E.P. (2018) Planning at Polder Valley : redesigning the planning process through qualitative research.

Kamphuis, E.P. (2020) Developing and applying a framework for fast-moving consumer goods companies to visualize the output of a cost-to-serve analysis.

Kaptein, R (2017) Het verminderen van afkeur bij composiet producten.

Kareem, Jonas (2024) Fabrication and electrical characterisation of hexagonal GeSi nanowire devices.

Kasteel, A.K.H. (2020) Optimization of the supply chain to improve the on-time performance.

Kauffeld, Bastiaan / B.G (2020) Dynamic scheduling using dispatching rules in a hybrid flow shop with stochastic processing times.

Keppels, E.H. (2016) Taking control of the after sales - The design of a supply chain control tower, which will help Thales by improving the supply chain visibility of their new type of after sales service.

Keppels, E.H. (2019) Dynamic product routing in a hybrid flow shop.

Kerckhoffs, N.N.J.H (2021) Business process optimization: An approach for improving organizations by integration of external data.

Kerkhof, R.G. (2022) Benchmarking Car Dealership Efficiency using DEA NSBM.

Klaassen, W. (2019) Visualizing ocean carrier performance : a framework for evaluating logistic partners.

Klein Koerkamp, Darryll (2024) Towards An Efficient and Standardized Warehouse Optimization Strategy : An Automated Performance Analysis Model.

Klein Koerkamp, Joey (2021) Production scheduling at MPS-level under nonlinear-capacity constraints.

Kloppenberg, J.B. (2020) Improving the production facilities’ layout to decrease the busyness at Timmerije B.V.

Kloppenburg, G.W. (2019) The adoption of intelligence amplification in the slotting process : a case study in the data validation automation of a Dutch Retailer.

Koeijer, B.L.A. de (2013) Cradle to Cradle Packaging Development: Method | Case Study.

Koeijer, B.L.A. de (2011) Duurzaamheid duurt het langst. Een onderzoek naar duurzaamheid binnen Attema B.V.

Koers, Roy (2021) Decreasing the error-susceptibility of the current administration process of PMC 1 at the company.

Koerselman, Noah (2023) The Impact of AI on the Banking Industry.

Kok, D. (2023) Towards the optimal maintenance process according with the EN-17007 standard.

Kokkeler, C.J. (2023) PROMISE : Process Mining for SMEs: a Methodology.

Koning, T.A. de (2021) Optimisation of the weight stabilisation system at Jacobs Douwe Egberts : a discrete-event simulation study.

Koning ter Heege, S. (2020) Gaining insight in the constraints of the monthly demand on a tyre production plant to improve production adherence.

Koning ter Heege, S. (2023) Simulating expected On-Time, In-Full delivery performance for fertiliser transhipment facilities.

Kooke, Thom (2024) Enhancing Cost Estimation Processes In Industrial Construction Through BIM.

Koopman, M.P. (2021) Data Driven wheel set usage prediction and inventory control.

Koopman, N.H.D. (2023) Improving internal routing operations in the automotive industry.

Koppele, I. M. Z. te (2023) Dashboard on lead times.

Korpershoek, L.C. (2018) Improving the receiving processes at Hamifleurs.

Kortenhorst, N.J. (2019) Improving the internal sequencing logistics at Scania Production Zwolle.

Korver, M.C.J. (2021) Improving the production planning of a producer of plastic packaging.

Koster, F.F.J. (2018) Improving the inbound goods operation at Company X.

Koster, F.F.J. (2021) Optimization of planning and resource use.

Koster, L.J. (2015) Improving measuring and target setting for processes impacting customer service in a Fast Moving Consumer Goods company.

Kosters, S.W.L.G. (2024) Development of a Multi-Objective Resource-Constrained Scheduling Method for the Utility Construction Sector.

Kraaijvanger, S.G.W. (2021) A simulation study; modelling Ubbink’s tugger train replenishment system, in a Kanban controlled environment.

Kremer, Mathijs Harry Franciscus (2024) Improving Parenteral Medication Administration at Home pathways.

Kroep, S. (2019) Application of Adaptive Large Neighbourhood Search for a Rich and Real-World Vehicle Routing Problem.

Kruger, M. (2021) Creating a portfolio of the applications at Traffic Today.

Kruif, Iris de (2023) Designing a KPI dashboard for the test process of tape drives at Bluetron.

Kruijff, O. de (2018) Using additive manufacturing for rapid tooling of obsolete spare parts in the aerospace industry.

Kruit, M.N. (2021) Increasing the EMVI score by developing a dashboard.

Krullaars, T. (2024) Integrating and optimizing the milk-run of Thales Hengelo by creating a Vehicle Routing Problem model.

Krullaars, Thomas (2020) Monitoring the execution of the invoice process of Sensata by designing a tracking tool.

Kuijper, M.R. (2024) Optimizing the sequence-dependent setup times of a machine using an optimal lot size heurisitic for TKF.

Kuks, E.M.A. (2023) Enhancing reuse ecosystem development for primary FMCG packaging : the development of a support tool for the supermarket branch.

Kösters, D.M (2021) An improvement to the refill process of vending machines : a thesis about demand analysis, product range improvement and review period calculation.

Lagerburg, R.A. (2023) Overcoming Challenges in Software Development Projects: An Integrated Approach for Small and Medium Enterprises (SMEs).

Lambalgen, N.R. van (2024) Simulating the Semiconductor Manufacturing Process through AutoSched Advanced Processing : An Exploratory Study to Enhance NXP’s ASAP Model Forecast Accuracy.

Lamers, B.G.H. (2024) Optimize the Automated Storage and Retrieval System (AS/RS) of Vink Kunststoffen to improve warehouse efficiency.

Lamers, M.E.G. (2024) Process defects and resulting structure of unidirectional CF/LM-PAEK after induction welding.

Lammerink, L. (2018) Lean optimalisatie binnen een distributieproces.

Lammerink, L. (2021) Development of a supplier analysis and selection tool within the purchasing department of a production company.

Langeveld, K.A. (2023) Increasing the revenue from service-provision through servitization.

Lansink, T.T.M. (2020) Improving inventory management through ERP implementation.

Lee, T.K.H. van der (2023) Kinetic modelling of LDPE hydrogenolysis using non-linear regression.

Leij, R.M. van der (2022) The development of a method and tool to quantify sustainability for decision-making in product development : a case study applied at Van Raam.

Leijnse, N. (2020) Order fulfillment of spare parts during the end-of-life phase.

Lerink, C.W. (2020) Visualisation of fouling during oil-in-water filtration using tubular ceramic membranes.

Leuverink, J. (2021) The eggficient Prinzen, Insights in the throughput time.

Limpers, W. (2022) Production process design in the sheltered workshop of VMI.

Lin, C.Y. (2024) Enhancing Cancer Treatment Planning : A Combined Approach of Process Mining and Machine Learning with a Focus on Colorectal Cancer (CRC).

Lippok, B. M. (2018) Optimizing the surgical patient flow in a German Hospital.

Lok, Edwin (2019) Identifying the Economic Performance of Heat-Based Industrial Symbiosis Networks : A Simulation Study.

Louw, Joël (2015) Stapsgewijze uitbreiding van het subseakabelproductieproces bij TKF.

Lucas, R.H. (2020) Workflow improvement by artifact development.

Luijtelaar, R. S. van (2024) Reducing the Excessive Waste Production in the Cracker Production Line at Company X.

Lute, S. (2022) Improving retailers' inventory updates in an online shopping platform : establishing a method for real-time inventory connection.

Maljaars, M. (2018) Planning op de dagbehandeling : interventies voor zowel korte als lange termijn in de huidige planningsmethode, zodanig dat er een betere match is tussen vraag en aanbod.

Marsman, B. (2020) Analysing machine learning algorithms to automate a decision making process.

Maryam, Sahlabadi (2023) Balancing Energy Transition Policies & Sulfur Recovery Efficiency in the Netherlands.

Marčetić, N. (2022) Community-based design to help older adults to increase their physical activity.

Matena, M.H. (2015) Public transport on demand : a better match between passenger demand and capacity.

Maximova, A. (2021) Lifestyle games are not only for people with obesity.

Medendorp, L.A. (2018) Optimalisatie van het voorraadbeheer van de montagelijnen : het elimineren van verspilling op de afdeling magazijn bij HP Valves.

Meer, Tom Q. B. van der (2019) Improving the factory efficiency of Bottling Line 2.

Meijer, T.G.J. (2019) Providing an insight into digital drawing technologies: Visualizing the costs and benefits using dashboards.

Meijer, T.G.J. (2021) Improving the tactical planning process to stabilize the workload.

Meijndert, Nicky (2016) Op weg naar een voordeliger lasproces.

Menningh, C.R. (2020) Using dual-sourcing for ordering spare components.

Merrienboer, I.A.A.F. van (2016) Reducing production lead time at Zodiac Galleys Europe.

Meulenbroek, Nils (2024) Transitioning to a counter-based maintenance strategy at the packaging filling lines of Heineken.

Michael, Michael (2023) Moisture Optimization and Heating Process Automation of Freeze-Dried Coffee Production: A Case Study at Jacobs Douwe Egberts Peet's.

Michshenko, Yekaterina (2024) Monitoring of Lymphedema in the Arm after Cancer in the Home Environment.

Midden, J.H. van (2021) Using process mining and event log analysis for better business strategy decision-making.

Miu, Ioana (2022) A Reference Model for Decarbonising the Passenger Aviation Ecosystem.

Moejes, D.S. (2020) A new simulator for training off-pump coronary bypass surgery.

Moghaddar, A.A. (2022) Enhancement of Formula One Driver Performance by Group Driven Process Learning.

Mok, S. (2017) Passive removal of electrochemically produced hydrogen gas in a microfluidic device.

Morrenhof, M.A. (2021) Using mathematical modelling to create a driver schedule while taking scheduling restrictions into account.

Murti, G.W. (2017) The effect of ethanol/water on lignocellulosic biomass and cellulose liquefaction.

Naastepad, Julia C.J. (2024) Strategies To Decrease Emissions in Freight Transport.

Nab, F. (2017) Analyse en optimalisatie van het maaltijdserviceproces.

Navruz, Gurkan (2015) Ontwerp, herontwerp en implementatie : het verbeteren van bedrijfsprocessen en informatiestromen voor een operationeel ondersteunend team.

Nazarian, A.A. (2015) Voorraadbeheeroptimalisatie van een retailer.

Neacsu, T. (2022) From EDIFACT to OpenTripModel: analysis, migration and guidelines based on data from real-world logistics companies.

Nieuwenhuizen, D.B. van den (2016) eHealth in the preventive child health care: empowering the ‘hard to reach’ parents in the preventive child health care via persuasive eHealth technology.

Nieuwmeijer, L.F. (2020) Using Mixed Integer Linear Programming for providing insight into structural improvements in the production planning process at a food production company.

Nijenkamp, B. (2018) Designing the inbound warehouse process.

Nijenkamp, B. (2015) Het inrichten van een efficiënt logistiek proces van poliklinische monsters.

Nijhof, E.Y. (2022) Planning interdependent tasks in house construction - an extension to the critical path method.

Nijholt, Matthijs Haijo (2017) Een onderzoek naar het toekomstige wagenpark voor de huisafvalinzameling van Remondis Dusseldorp.

Nijhuis, M.C. (2021) Tactical planning to facilitate patient self-scheduling.

Nijkamp, D.M. (2019) Data gathering method to measure the effects of resource input on the production process.

Nijkamp, D.M. (2023) Matching Input Stream to End Product with Production Restrictions : improving business processes.

Nijs, Luuk (2022) Impact of the weekday-effect on stroke care in Slingeland Hospital.

Noteboom, G.N. (2018) Procesoptimalisatie door IT-artefacten : het verhogen van de bezettingsgraad van de warmhoudkamers bij Tata Steel IJmuiden.

Olde Meierink, A.H.R. (2016) Research to practice gap: A qualitative study into the use of visualisation when implementing a new technology.

Oldemaat, T.A.B. (2019) Improving the Internal Big Volume Transport Logistics at Bosch Thermotechniek Deventer.

Ooms, L.A. (2019) How can we cure the care sector? : optimization of the health care logistics of Ambiq for the benefit of their clients.

Oosten, B.T. van (2024) Developing a plate nesting algorithm for a steel processing company.

Oosterhout, J.J. van (2020) Kan DIEP korter? Route naar mogelijkheden voor reductie van ligduur van de DIEP procedure in Ziekenhuisgroep Twente.

Oosterloo, M.J. (2021) Predicting the required public charging capacity for electric vehicles in Zwolle.

Oude Nijhuis, K.A. (2018) Monitoring and controlling critical process parameters at the retort production line of Abbott Zwolle.

Oude Vrielink, MSc Jordy (2019) Valuable waste flows at company X : matching administrative and physical flows to improve their accountability and traceability.

Overmars, C.C. (2019) Production line improvement at Bosch Thermotechniek.

Overmars, D.M. (2021) Modelling uncertainty in a configurable environment : a case study at Pan Oston.

Ozo, R.O. (2023) Providing recommendations for reducing mean and variability in attenuation of optical fibre cables at TKF’s end control.

Palanikumar, C. (2023) A process mining framework for continual service improvements.

Panman de Wit, J.S. (2015) Onderzoek naar de efficiëntie en groei van PB International.

Pazos Urrea, Monica (2019) Concentration and Esterification of Lactic Acid in Complex Coacervates.

Pelgröm, F. (2021) Waarom staat de productie stil? : Het herontwerpen van een productieproces bij DCW.

Peperkamp, M.W. (2021) Design and optimization of the pultrusion process toproduce reliable and recyclable wind turbine blades.

Peraki, Lydia (2020) Towards a climate-neutral wastewater treatment plant in Leeuwarden.

Perijoc, S.N. (2024) Quantum AI for Application in Industry : A Workflow Model.

Peters, Sabine I. (2024) Structuring the Sales process to improve the information handling surrounding the sale and production of complex machines.

Petter, J. (2018) Procesbeheersing door Single Piece Flow : de implementatie bij de pneumatisch bediende afsluiters.

Pijnappel, B.T.A. (2018) Master thesis, optimizing the reverse process of PostNL pakketten.

Pinxteren, V.A. van (2018) A supporting instrument for reflection based activities in higher education : achieving more potential through reflection.

Platenkamp, T.J.W. (2019) The impact of a new filling line : a multi-scenario discrete event simulation at Company X.

Ploeg, A.G. (2018) Planning van longpatiënten onder de loep genomen. Bachelor opdracht: objectieve analyse van de patiëntenplanning op de afdeling longgeneeskunde in het Deventer Ziekenhuis.

Plomp, B.I. (2019) A bottleneck analysis to increase throughput at Apollo Vredestein B.V.

Pol, M.J. (2014) Improving the continuous flow - Increasing the performance at Packaging Line 51 at Heineken.

Politiek, F.J.J. (2015) Improving the scheduling of Aircraft Service tasks at KLM Aircraft Services.

Poortema, K. (2018) Transport binnen het productieproces : de optimalisatie van routes van afsluiters op de werkvloer bij HP Valves.

Poppelen, Daniël van (2012) The influence of in-plane miscut on the surface morphology of annealed DyScO3 (110) substrates.

Postma, G.J.J. (2019) Improving the throughput time of the service department at AKOR BV.

Potters, E.M. (2020) Standardization of cleaning practices in a growing food supplement wholesaler.

Potters, E.M. (2023) Pharmaceutical Cold Supply Chain Management Considering Medication Synchronization and Different Delivery Modes.

Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.

Prins, S.A. (2022) Creating a Tailored Analysing Methodology for VMI.

Pu, Leiying (2019) Co-design approach : a collective design method for improving working efficiency and satisfaction in user support design processes : an empirical study based on three comparison groups simulating a real-world quick start guide design process.

Putten, F.M.J. van der (2017) Supply Chain Network Redesign.

Quak, Remi (2020) Process Mining in Healthcare: Gaps between protocol and clinical practice of critical side findings in radiology.

Quint, C.J. (2015) Towards a synchronized coordination in the supply chain of Production Chemicals.

Rao, Bolar Vanishree (2021) A study towards the optimization of pultrusion processes: process - microstructure -property correlation.

Rasing, A (2018) Automation and increased use of carrier data to improve the process of ocean carrier selection.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Remmelink, M. (2018) Improving the MRP of Nedap Retail.

Rensen, J.J. (2019) Reducing the throughput time of product A: by improving planning and control.

Rensen, J.J. (2021) How to align storage and order picking in the VMI warehouse.

Reuvers, J.M. (2024) Thesis on using interactive interfaces to assist with smoking cessation.

Richards, Carithea (2023) Urban Production : Exploring Urban Manufacturing Scenarios for Future Urban Resilient Cities.

Richter, N.G. (2019) Process mining in programming game logs to differentiate between skill levels.

Riet, D.S. den (2022) Improving the sustainability of waste streams at the Heart Center of Isala Hospital in Zwolle.

Rijst, J.C. van der (2019) The assignment of clinical departments to wards.

Rikken, T.W. (2019) New journey to reduce cost of inventory.

Roelink, Daniël (2021) Improving the batch handling of the container-series line at Easy Sanitary Solutions.

Rolleman, L.T. (2024) Guiding Voortman customers to optimize machine output.

Rotteveel, Dorte (2020) Towards a faster scheduling workflow: A research on how to reduce the time taken to schedule advisors in Visitour at Geas Energiewacht.

Rous, E. (2021) Shopfloor Organization and management system : developing a software system for a matrix-production system.

Rouwers, J.A.M. (2022) Inventory Management optimization through a Demand Forecasting improvement.

Ruiter, J.B.C. de (2022) Reducing process variation on the Coating line at TKF by implementing a statistical analysis method.

Ruiz Flores, Diana Cecilia (2024) Hydrogenolysis of biomass to ethylene glycol : a yield improvement and its effects on lignin.

Rusch, Nina (2016) Analysis of the filtration process at a beer brewery.

Rusch, Nina (2018) Optimizing and Implementing the Inventory Control Policy of Finished Products within Bolletje’s ERP System.

Ruth, F.J. van (2015) Improving problem detection and focus for root-cause analysis through case-based reasoning and group decision support systems.

Salomons, T. (2016) Een basis voor continu verbeteren bij AWL.

Salomons, Tim (2019) Item availability restricted.

Schaik, L.A.W.F.J. van (2018) Assessing operational excellence and decisive factors to support performances of hospitals departments.

Schellevis, H.M. (2017) The effect of membrane topology features on ion transport phenomena.

Schepers, P. (2019) Application of a process model to define potential operational functional failure conditions.

Schipper, Ruurd de (2014) The usefulness of IT innovation classification for business model innovation.

Schmale, M.D. (2024) Ceramic Surfaces as a Source of Luxury in Handheld Devices: A Study on the Physical Attributes that Predict Luxury and how to apply these in technical ceramics manufacturing.

Scholte Lubberink, D.L. (2021) A Multiple-Case Study on the Future of Roles and Competencies: Purchasing, Logistics, Marketing, and HRM.

Scholten, Peter (2016) Efficiency analysis and improvement of the canning line at Grolsch.

Schoon, A.L. (2019) Multi-Criteria Decision Support for Transportation Network (Re-)Design at Outbound Logistics, Tata Steel Europe.

Schrader, A.H. (2020) Production planning of the 3PC department at Trivium Packaging.

Schrader, I.M.W. (2019) Process Design of the Flexarm Assembly Line at VDL ETG Almelo.

Schreuder, N.W. (2014) Maximizing flexibility through minimizing changeover time.

Schultheiss, J. (2023) The Effect of Spacious Virtual Nature and Personal Storytelling on Social Connectedness in Young Adults.

Schuppert, W.L.C. (2023) Optimizing computed tomography scan scheduling for sustainable energy usage : a simulation study at Medisch Spectrum Twente.

Segerink, Anton (2021) Ontwikkeling van een BPM IT-oplossing voor productiviteitsvisualisatie in een magazijn.

Shenkute, Nathnael Teodros (2021) Introducing Artificial Intelligence in Fast MicroGC Analysis.

Sibma, S.D. (2021) Impedance Matching of Interdigital Transducers on Thin-film Aluminium Nitride.

Sipma, K.E. (2021) Combining smart charging and energy storage for peak reduction at EV fast-charging stations.

Slutter, C.P.E. (2020) Devising an inventory control system for an assembly line at Mainfreight.

Smeekes, B. (2020) Decision support for barge planning at Combi Terminal Twente.

Smet, Joep de (2020) Optimization of the tactical allocation of resource capacities at an academic animal hospital.

Smit, Colin (2024) Analysis and recommendations to improve the Request for Quotation process.

Smit, F.C. (2015) Integral planning of operating rooms and wards : Tactical allocation of beds to reduce fluctuations in bed utilization for Medisch Spectrum Twente.

Snaterse, M. (2019) Well-defined Data in a Production Planning Context.

Snellen, L.A.S. (2021) A Capacitated lot sizing and scheduling model with sequence-dependent setup costs and setup times to improve the tactical production planning of Frieslandcampina.

Snieder, D.A. (2021) Finding a common understanding surrounding lead times : a procurement process analysis in a make-to-order setting.

Snijders, T.G.A. (2015) Het ontwerpen van een nieuw kostprijsmodel voor de onderdelen bij Bedrijf X.

Snijders, T.G.A. (2017) Redesigning a food assembly process at KLM Catering Services.

Snoeijink, B.D.A. (2020) Production process improvement of dredger hardware.

Soltani, F.H. (2016) Optimizing processes at the spare parts warehouse Of Port Elizabeth.

Sombroek, E.S. (2023) Establishing a TCP connection between a Graphical User Interface and the controller of a robot.

Son, M. van (2015) ERP as a driver for strategic purchasing redesign : a case study at Gelre hospitals.

Sparrius, T. (2021) Contest theory models of long-term advertising and short-term competitive behaviour.

Sparrius, T.L. (2019) Analysis and improvement of the new product introduction centre of Company X using key performance indicators.

Sparrius, T.L. (2019) Analysis and improvement of the new product introduction centre of Company X using key performance indicators.

Spijkerboer, E. C. (2019) Blockchain based transaction processing system : a reference architecture for an integrated blockchain based transaction processing system.

Spijkerman, V. (2015) The design of a Business Intelligence application to control hospital funding in The Netherlands.

Spée, Boín (2024) Optimizing Decision-Making During Product Phase-Out at Company X : Balancing Financial Risk Mitigation and Customer Satisfaction.

Staring, R.J. (2019) Cross-project collaboration in the Construction Sector : a 4C Control Tower for Construction Supply Chains.

Stefess, Floor (2024) Developing A Framework To Support The Introduction Of Reusable Glass Packaging Into A Value Chain : Establishing An Ecosystem Configuration And Corresponding Implementation Roadmap For The Content Producer Brinkers Food.

Stevens, S. (2015) De invloed van additieven en stroomdichtheid op de koperdistributie bij het galvaniseren van through holes in printplaten.

Stiphout, A.J. van (2020) Comparison of Scheduling Methods for Different Cases of a Complex Flexible Job Shop Problem.

Stoica, Eva (2024) The Complexity of an IT Landscape : A Method for Quantifying Application Landscape Complexity and Understanding the Cost of Complexity.

Straathof, Paul (2012) Botonderzoek: het ontwerpen van een meetopstelling waarmee de temperatuursveranderingen in het corticale botweefsel van een pijpbeen dat geruimd wordt, gemeten kunnen worden.

Strijker, V. (2015) Using simulation for a new production line at Philips Drachten.

Stroop, Babet (2023) Capacity pooling within the midwifery profession, what are the effects?

Sueters, M.L. (2023) Reducing the total travelling distance of order picking in a warehouse by introducing class-based storage.

Super, I. (2020) A standard approach for the flow re-engineering process of Company X.

Super, Ilse (2023) The Systematic Development and Implementation of Key Performance Indicators for Tactical Integral Capacity Management : A Case Study at a Single Specialty Breast Cancer Hospital.

Tas, J.G.A. van der (2018) Improving the container planning (process), by means of a planning tool.

Tas, J.G.A. van der (2021) Developing a prescriptive IT architecture maturity model (ITA-MM).

Tavenier, N.M. (2020) Tekst classificatie als automatisering bij de analyse van open begrotingen.

Temmink, Wout (2020) Assessing the impact of variability on the performance of the X production line.

Tenhagen, C.J. (2021) A simulation study to the prediction of COVID-19 in the Netherlands.

Tenhagen, Cyrelle (2018) Increasing space efficiency within a Vertical Lift Module at Benchmark Electronics, Inc.

Teunissen, J. (2018) Improving production planning by flow shop scheduling algorithms : A case study at ForFarmers.

Teunissen, Jeroen (2016) RFID en zoeken : een haalbaarheidsstudie naar RFID en hoe zoeken te verminderen.

Thelen, E.A.H. (2021) Evaluating the return process of international books at Company X.

Thomasson, S.A. (2017) Improving forecast performance of LPG demand.

Tijhuis, A. (2019) Improving the inventory control policy of TenCate Grass.

Timmerhuis, N. (2015) In-situ characterization of thin layer polysulfone in water-toluene mixtures.

Timmerhuis, N.A.B. (2017) Two (L-L) and three (G-L-L) phase extraction processes in capillaries with heterogeneous surface wettability.

Timmerman, M. (2015) Rapid exfoliation of layered metal-oxides.

Timmerman, T.H. (2024) Optimizing assembly line fill rate by minimizing the losses due to discrepancy between truck and workstation lengths.

Timmermans, Seine Bert (2017) Determining a 3D position inside a ship during construction and communicating the position to CAD software.

Tjeerdsma, S. (2019) Redesign of the AutoStore order processing line.

Toebes, I.W. (2020) Implementation and effect analysis of video consultation in a Dutch hospital.

Toering, N. (2021) Accomplishing a high delivery satisfaction by switching to a better process-supporting planning system.

Trentelman, E. (2015) Resource capacity planning of a spinal injury rehabilitation care unit.

Tzani, Donika D. (2021) Using Enterprise Architecture for controlling complexity and improving business performance.

Uijthof, E.M.T. (2023) Physics-informed reinforcement learning for process design.

Ungerer, L.V. (2021) ICT implementation: Comparing theory with practice.

Valk, C.M.S. van der (2018) Een scenariomodel voor Bouwmaat : de financiële gevolgen in de supply chain.

Valk, C.M.S. van der (2021) Pioneering with Mixed Integer Linear Programming as a solution to a Two-Stage Hybrid Flow Shop with No Buffer Capacity : a case study for confectionary manufacturer Brynild.

Valk, J.P. van der (2014) Towards efficient distribution of local agricultural products : implementing a logistic framework at PuurDichtbij.

Vegt, C.R. van der (2021) Analysing and visualising data to improve the productivity level of an Agile organised company.

Veijer, J (2015) Analytical model of a mold dependent production line: Applied to future thermoplastic skin panel production for Gulfstream G650 tail wings.

Veldhuis, N. (2020) The impact of an increased frozen scheduling interval on the supply chain of HEINEKEN Netherlands Supply.

Veldhuis, Nicole (2016) Miniload of niet? : onderzoek naar de haalbaarheid van een mogelijke implementatie van Miniload binnen VDL ETG Almelo.

Veldhuizen, A.R.P. (2024) Reducing Pulsation in External Gear Pump Output for Rubber Extrusion.

Veldkamp, Galina (2024) Deriving adequate insights in HMLV manufacturing.

Veldwijk, G.J. (2019) Exploring Characteristics of an Employee Engagement App.

Velt, Eva (2017) The Robot Facebook: The field spotters guide of Robots.

Velthuis, J.D.G. (2020) Developing a data-analysis dashboard for Forque.

Velze, B.S. van (2023) Departmental integration of an automated material logistic system Case study of integrating an automated material logistics system within the Zaans Medisch Centrum surgical department.

Veneberg, R.K.M. (2014) Combining Enterprise Architecture & Operational Data To Better Support Decision-Making.

Veneklaas, W. (2019) Decision support for design, implementation, and feasibility of an admission lounge.

Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.

Verkerk, Lotte (2022) Improving the planning process by developing a forecasting model : predicting future demand based on historical information.

Vermaas, Alicia (2019) A product development success? : Providing insights in improvement of industry's product development maturity.

Vermeer, M. (2019) Interface trap density extraction from the subthreshold slope of FDSOI devices.

Veth, M.G.S. (2024) Improving Market Intelligence : Developing a Centralised Knowledge System to Foster Data-Driven Decision-Making.

Vetkamp, M.E. (2019) Productiviteitsverbetering voor een sociaal werkvoorzieningsbedrijf.

Veuger, D.H.W. (2022) A Research on which panel bender Pan Oston should implement in the production process.

Veuger, D.H.W. (2024) Maximizing the travel time efficiency of the automated storage and retrieval system of company X.

Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.

Villavicencio Arzola, P.O. (2020) Primary interactions between cellulose and lignin during fast pyrolysis of lignocellulosic biomass.

Visser, BSc Jedidja (2019) Optimalisatie van medicatiebeschikbaarheid met behulp van risicoanalyse en simulatiestudie.

Voetdijk, N.J. (2017) Een model voor de productiekwaliteit van bedrijf X.

Voorwinden, D.L. (2019) Reducing waste of chocolate spread generated during production at Brinkers Food B.V.

Vreriks, S.F. (2014) Structuur: een middel naar succes.

Vries, C.R. de (2020) Optimizing the salt stream to eliminate the emergency route.

Vriezekolk, B. (2020) Optimization of the inbound supply chain for small sized materials with low demand.

Vriezekolk, Björn (2018) Grip op het materieel : meer inzicht in de prestaties van het materieel met behulp van KPI's, VBA & een nieuwe manier van tarievering.

Wang, Yuchen (2016) Project portfolio management using capability- based planning.

Weesie, V. (2020) Preventing a third work shift during peak demand at the multi-model circular conveyor belt of Power-Packer Oldenzaal.

Weezel, Giel J.W. van (2023) Breast Cancer Screening in the Netherlands : a Health Economic Evaluation of Screening Strategies.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.

Welling, S.A. (2021) Improving the allocation of cream for FrieslandCampina.

Wentzel, S.J. (2017) Improving warehouse layout design : A study to optimize the warehouse of the hospital of Aruba.

Westerink, Milan (2018) Optimization of MSTpPlaster rooms : a simulation Study.

Weustink, T. (2018) Het reduceren van afsteltijd ten gevolge van ombouwen.

Wichink, R.H.J. (2017) Een simulatiestudie naar de verbetering van het werkvloergebruik bij VMI Holland BV.

Wichink, R.H.J. (2019) Improvements in Production Layout and Internal Logistics.

Wielstra, L.M. (2017) Managing Information Within the Three Lines of Defense to Ensure Valid Audit Trails - Financial Sector - A Practical Organizational Framework.

Wienk, Ruben (2019) Integrating a warehouse management system : a feasibility study.

Wieringa, J.K. (2021) Bot for continuing airworthiness : proof of concept for passenger carrying drones.

Wijnands, M.P.J. (2019) Op welke manier kan bij stationsprojecten het programma van eisen zorgen voor een integrale aanpak omtrent de transferfunctie?

Wilbers, G.G.B. (2023) The design of an Acute Medical Unit.

Wilt, Yannick van der (2024) Conduction welding of thermoplastic composites : An experimental study towards specifying the process window for process time and temperature.

Wisse, T.C. (2015) Het verleggen van het klantorderontkoppelpunt voor conventionele producten bij Koninklijke Verpakkingsindustrie Stempher BV.

Wit, L.J. de (2021) Optimising the planning process for the field service of REMONDIS Smart Infra.

Wit, L.J. de (2023) Truck inventory replenishment process optimization at REMONDIS Smart Infra.

Wit, N. de (2016) Development of a Reliable Prediction Method for Urgent Infra-Failure Recovery Times at ProRail B.V.

Witsen, O.N.C. (2017) Het reorganiseren van het intern transport bij Fokker.

Wolff, T. de (2020) A new production planning strategy for Ovimex.

Wolfkamp, T.J.H. (2021) Optimization of the high consumption logistic process at Scania Production Zwolle.

Yadhukrishnan, (2023) Designing and Optimizing a flexible Battery Pack Manufacturing Process Incorporating Cylindrical and Prismatic Cells: Key Factors and Strategies.

Yakushkina, Daria (2021) Digital Transformation in conditions of pandemic.

Yang, J. (2023) Item availability restricted.

Zadelhoff, L.D. van (2018) Het ontwerp van een hoog-automatische productielijn.

Zallaya, Sara (2023) Methanol as a Hydrogen Carrier Coupled with Magnesium-Based Oxides Carbonation for Carbon Dioxide Capture.

Zandschulp, L.J. van de (2023) Design of a framework and warehouse facility at ROSEN Europe.

Zeeburg, R.B.T van (2015) Item availability restricted.

Zheng, Y.F. (2022) Process mining on FIFA controller data.

Zomerdijk, J. (2017) Een onderzoek naar de afvalstromen van een productieproces.

Zuidema, Dennis (2022) Work Breakdown Structure as a method for planning and control at Nijhuis Bouw.

Zwanenburg, M.I. (2021) Process Design and Resource Allocation at the ProRail ERTMS Integration Lab.

Zwanenburg, M.S. (2020) Improvement of the picklist process for the logistical centre of Kolb.

Zwier, P.J. (2018) Analyse en optimalisatie van een kittingproces.

Zwiers, R.J. (2019) Determining the optimal warehouse location.

Zwiers, R.J. (2021) A modified cheapest insertion heuristic for the multi-objective pickup and delivery open VRP with time windows for a homogeneous fleet with heterogeneous freights : a case study.

Zwieten, Ralph van (2015) Debottlenecking bij FrieslandCampina Domo Borculo.

el bou Messaoudi, Ferial (2021) Supporting Infotopics in finding user cases to apply a business Process Mining solution.

ten Holder, C.S. (2024) Making Qualitative Attack Trees Accessible : A Gamified Interactive Visualization for Non-Expert Stakeholders.

Internship Report

Bos, Frans (2011) Torrefaction gradients in biomass.

Schagen, M.V. van (2011) Item availability restricted.