University of Twente Student Theses

Login

Domain: 52 mechanical engineering

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Year | Item Type
Jump to: 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 1991
Number of items: 968.

2024

Beijersbergen van Henegouwen, D.G. (2024) Design of a 3D printed device for monosize microbubble production on a chip.

Blöte, Stefan (2024) Controller Design for an MR-Safe Vane Motor.

Brantjes, R.J. (2024) Aerodynamic interferences for the OmniMorph aerial vehicle.

Coco Martin, F.S. (2024) Characterization of IRONSperm clusters : the effect of frequency actuation, concentration, shape and composition.

Ding, Daniël (2024) Upscaling Production of Monodisperse Microcapsules for Injectables by In-Air Microfluidics.

Feldbrugge, B.A.J. (2024) Tendon routing optimisation of a tendon-driven gripper to reduce frictional effects.

Greef, D. de (2024) Design improvement for a pneumatic soft inflatable actuator.

Liet, S.R. (2024) An experimental setup for validation of the plane wave methods.

Meurs, D.G.H. van (2024) Development of a One-Part Bistable Eyeglasses Frame Design for FDM Additive Manufacturing.

Monchen, Niek (2024) The production and characterisation of magnetic particles produced with in-air microfluidics.

Nijboer, T.M. (2024) Kickstarting the Next Step in Urban Mobility. Design of an Interactive Design Tool & a New Urban Electric Vehicle.

Noort, Luc van (2024) Sensor Framework For Pediatric Cerebral Palsy Ankle Foot Orthosis : Development and Technical Validation.

Oude Tanke, Friso (2024) Mode I fatigue delamination growth in composite laminates : design of an automated DCB test setup.

Punte, H.J. (2024) Adapting Tradespace Exploration for Conceptual Structural Design of Monopile Upending and Lifting Tools.

Roelofs, Stijn (2024) Developing a user-friendly design workflow for optimised designs in Direct Energy Deposition Additive Manufacturing at Royal Kaak.

Rooijen, T.L. van (2024) Towards Defect-Free Printing of High-Strength Aluminium Alloys.

Roosenschoon, N. (2024) Digital twinning development in manufacturing SMEs : the design of a supporting methodology and evaluation tool.

Tijman op Smeijers, T.J.C. (2024) Hybrid and disturbance-observer-based control of a peristaltic pump.

Veldhuizen, A.R.P. (2024) Reducing Pulsation in External Gear Pump Output for Rubber Extrusion.

2023

Andersons, J.A. (2023) Exploring the benefits and limitations of multi-axis 3D printing for improved part quality and reduced waste.

Belshof, Koen (2023) A motion planning implementation and simulation for the Flux One.

Bertelink, S.H. (2023) 3D-printed monolithic oviduct-on-chip device.

Bessembinder, J.J.F. (2023) Development of an air-source, cascade heat pump, water boiler.

Boersma, P. (2023) Experimental validation and numerical modelling of train-bridge dynamics.

Bos, Jochem (2023) Item availability restricted.

Bosman, F. (2023) Hardware for DIY at home lab for telemanipulation control.

Bouma, L.J. (2023) Atmospheric sound propagation modeling with the Harmonoise model applied to wind turbine noise.

Braks, R.J.M. (2023) Motion control of IRONSperm clusters in a vascular model.

Broeke, D.A. van den (2023) Particle detection and tracking in avalanches.

Brugman, Aniek (2023) Evaluation of the Reboocon Intuy knee.

Coulibaly, A.A. (2023) Test method for measuring electrical resistivity of UD CFRP materials with off-axis fibre orientations : A study towards a better understanding of the electrical behaviour within the complex fibre network of UD CFRP’s.

Dickhof, Iljar (2023) Wind tunnel measurements of a small scale wind turbine.

Domingo Gil, Francisco José (2023) Comparison of force and image-based controller for autonomous ultrasound robotic acquisition during varying tissue stiffnesses.

Dransfeld, MSc. F.J.M. (2023) 3D Ankle Force and Moment In Ankle Fracture Patients Walking With Instrumented Crutches.

Eldesouky, Mohamed Ibrahim (2023) Enhancing Variants Management at Thales Hengelo.

Elst, Daniëlle van (2023) Development of a 3D stress foot plate meeting the medical device regulation and affordability - Product development without a business case.

Farkas, Marton (2023) Reliable specific heat capacity measurements of thermoplastic composites with differential scanning calorimetry.

Fernhout, M.M. (2023) A Deep Learning Approach for Assessing Micrographs of Fibre Reinforced Composite Laminates.

Fix, J.A. (2023) A Linearized Parameter Study Of A Friction Isolator System : Towards A Frequency Domain Design Guideline.

Frielinck, R. (2023) Learning Factory Configuration Tool: An Approach for Preserving the Value of Educational Learning Factories.

Gabriël, Gaston Ramon (2023) The implementation of the 3CC muscle fatigue model into CEINMS.

Galen, D.J.M. van (2023) ECMO Mobilizing Device.

Gebbeken, J. (2023) Modelling of Fluid Flow and Mass Transfer in a Hollow-Fibre Membrane Oxygenator.

Goudsblom, T.G.J. (2023) Uncertainty Thinking - Embracing uncertainty in product development.

Groote, Jasper de (2023) Predicting data center behaviour with transfer learning.

Grootkarzijn, R. (2023) Adaptive Feedforward Control for Active Vibration Isolation Systems with Motion Stage and Nonlinear Dynamics.

Hagen, Jason ten (2023) Optimization of flexure mechanisms using gradient-based methods.

Haido, Jan (2023) A Methodology for Transitioning from Jig-Based to Jigless MIG Welding Utilizing Articulated Robots.

Hakvoort, M.H. (2023) Frequency Domain Optimization of the Tracking Performance of a Piezo Actuator Using Reset Control.

Hal, T.P.J. van (2023) Controller tuning for disturbance suppression in a piezo damped large stroke flexure hinge.

Haverkort, Arthur (2023) The influence of hybrid reinforcements on Long Fiber Thermoplastic composites. An experimental approach on the production process of (hybrid) LFT pellets and static/dynamic mechanical testing.

Heeg, Rogier (2023) Control of a system based on a 3D printed torque sensor.

Heeres, Roeland (2023) Creating an analytical model to predict the stiffness properties of a guidewire actuated bending tip.

Heineman, Paul (2023) Reviving Medieval Mechanisms: Design Study of Mechanical Escapements For Use in Space : What Parameters Influence Performance and How To Predict It.

Hendriksen, J.A.A. (2023) Developments in 2 degree of freedom fine force delivery by an assistive ankle orthosis.

Hepburn, Peter (2023) Guidelines to optimise the Ebike charging experience.

Heuvel, S. van den (2023) Hydrodynamic Forces Acting on Vertically Rising Bubbles.

Hijwegen, R. (2023) Driving Sustainability in Swiss Multi-Family Housing : A Comprehensive Carbon Footprint and Optimisation Analysis of a Sustainable Heating System.

Hilhorst, M.G.C. (2023) Construction of a simulation model to assist in production planning and control processes.

Hoeksma, Mechteld (2023) Designing a locking mechanism for fixating a specific heating system in vacuum with high forces and a high temperature.

Hofman, Erwin (2023) 3D Printing and Warpage Compensation of Multi-Material and Composite Products.

Hollaar, C.C.J. (2023) Modelling and improved design of a displacement converter for a thin sound source.

Jansen, J. (2023) Towards continuous material supply for friction screw extrusion and additive manufacturing.

Jansen, R. (2023) Designing a Quality Plan to enhance Production Process Quality at VMI Group.

Jong, S.D.M de (2023) A physics-compatible dual field discretization using domain decomposition.

Jong, T.M. de (2023) Developing guidelines for embedding codes onto products produced using Selective Laser Sintering.

Jong, T.M. de (2023) Developing guidelines for embedding codes onto products produced using Selective Laser Sintering.

Kajim, A.C.C. (2023) Conceptual design of a thermoplastic composite cross-car beam.

Kamphof, W.E. (2023) Design of a Flexible Hinge for an Atmospheric Dispersion Corrector.

Karytsas, Konstantinos (2023) Model-Free Reinforcement Learning Control of a Pneumatic-Driven Soft Continuum Robot.

Kleverwal, Koen (2023) Influence and implementation of static balance on a parallel leaf spring mechanism.

Kruiff, K.T. de (2023) Concurrent haptic feedback for improving the body balance of front and back crawl swimming.

LI, Yingying (2023) Reducing motion inaccuracies due to cogging in a redundantly actuated 3-DOF manipulator.

Lagerweij, A.B. (2023) Development and production of a new prototype tire and rim for remote controlled model racing cars.

Lange, T. de (2023) Towards an Efficient Multigrid Algorithm for Solving Pressure-Robust Discontinuous Galerkin Formulations of the Stokes Problem.

Legters, D.F. (2023) Item availability restricted.

Leth, A. de (2023) Design of a cell-based straight guidance.

Li, C. (2023) Catheter modelling and force estimation in endovascular application.

Lochem, S.H. van (2023) Developing a realistic venous model for in-vitro application of the eduECMO trainer.

Lopez Aguado Alvarez, José Pablo (2023) Automation of a High Precision assembly process.

Maat, Daniëlle (2023) 3D Simulation of a wind turbine rotor in axial inflow conditions.

Maryam, Sahlabadi (2023) Balancing Energy Transition Policies & Sulfur Recovery Efficiency in the Netherlands.

Mesu, J. (2023) Development of a methodology for efficient determination of process parameters in Pulse Electro-Chemical Machining.

Mooij, Q.J. (2023) Building a knowing maintenance organization by introducing a Knowledge Improvement Process for predictive maintenance at the Royal Netherlands Navy.

Morra, B.C.J. (2023) Design of a rapid characterization method to predict the sealing behaviour of LLDPE packaging films.

Mulder, L.H.W. (2023) Investigating the effect of misalignment on the efficiency of fiber array to grating coupling to support the design of a sophisticated passive degree of freedom alignment system.

Mulder, R.H. (2023) Financial viability of metal additive manufacturing in automotive industry for production of functional parts in high volume.

Nijhuis, M.F.H. (2023) Passive photonic chip-fiber alignment with a flexure-assisted micro-kinematic coupling.

Nijland, Lorenzo D. (2023) Optimization of product handling in the agricultural sector of an underactuated flexure-based gripper by using Bayesian estimation.

Nizamudeen, M.S. (2023) Computed Torque Control of Flexible Multibody Systems.

Nooijen, S.M.P. (2023) Concept study on novel gripper concept for in-hand rotational manipulation of poultry products.

Novillo Calvo, MSc Bme Ignacio (2023) Design of a high-level position controller for an Assistive Hinged Ankle Exoskeleton.

Oonk, Dennis (2023) Enhancing Upper Limb Prosthetics Design for Improved Strength and Modularity : An User-Focused Approach in Sierra Leone.

Oosterveld, S.W.S. (2023) Momentum-based control for compliant link quadrupeds.

Parvangada Chinnappa, Uthaiah (2023) An Approach for Risk Mitigation and Safety During Human-Robot Collaboration.

Patel, A. (2023) Numerical Investigation On The Thermal Behavior Of Li-ion Batteries Under Various Cooling Methods.

Ploeg, Maurice van der (2023) Improved Range of Motion of a Redundantly Actuated 3-DOF Planar Manipulator with Flexure Joints.

Posłuszna, Zuzanna (2023) Shape analysis for the design of a preformed osteosynthesis plate for accurate zygomatic reconstruction.

Rakels, Thijs D. (2023) PID tuning for electromechanical systems based on dilated LMI optimisation.

Raven Garcia, J. (2023) A geometric port-Hamiltonian modelling and simulation framework for morphing-wing UAVs.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Rezelman, SA (2023) Compounding and characterization of tire tread compounds using funtionalized rubber.

Ronduite, A. (2023) Simulating and testing of the movement of a millirobot influenced by a static magnetic field.

Ruitenbeek, Floris van (2023) Design of a Variable Stiffness Mechanism with Prescribed Behaviour Using a Variable Cam Pulley.

Schaaf, J.R. (2023) MPC design for a precision, flexure based, pendulum.

Schouw, C.Q.G. (2023) Replacement of Carbon Black by Renewable Fillers in Natural Rubber.

Schriemer, D.W. (2023) Numerical Validation and Modelling of Inversely Tracing of Particles to Locate Emanating Sources.

Schrijver, J.E. (2023) A novel framework to aid in the design of automated systems at veal abattoirs : a case study.

Schulte, T.M.G (2023) Managing the development of a two-story storage park.

Smit, T.S. (2023) Linking safety hazards to control measures for NS rolling stock.

Solombrino, Caterina (2023) Aerodynamic investigations of flatback airfoils and novel add-ons for modern wind turbine blades.

Stevens, F.H. (2023) Design, implementation and validation of a viscoelastically overconstrained flexure mechanism for increased dynamic performance.

Stoop, Jasper (2023) Additive manufactured enhancement for Two-phase CPU cooling.

Strik, D.H. (2023) Influence of print speed on the microstructure and mechanical properties of AA6060 FSEAM builds.

Uiterweerd, Eline (2023) Improving information traceability in high-tech contract manufacturing environments.

Uğurlu, Deniz Alp (2023) Enhancing Untethered Robot Localization : A Fusion Approach Integrating Magnetic Coupling Localization and Ultrasound Imaging.

Veldhuis, J.J. (2023) Development of a Cabinet Side Cooler for Application on a Naval Ship.

Ven, C.J. (2023) Investigating the possibilities of a flexible manipulator in Amesim to predict reaction forces.

Verhoeven, J.P. (2023) A Controller for Corrective Stepping for a Bipedal Exoskeleton Robot.

Vis, J.M. (2023) Ultrashort pulsed laser ablation in mass production of small metal parts, increasing ablation efficiency and reducing heat input.

Vloedgraven, B.T. (2023) System role of energy hubs in the North Sea by an energy system optimisation study.

Weekamp, Bram. J. W. (2023) Performance Comparison of Optimised Flexure-Based Translational Mechanisms for Easier Design Decision-Making.

Weerd, G.J. van de (2023) Development and comparison of open- and closed-loop control of untethered microrobots in a tuneable magnetic trap.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Wentink, J.S. (2023) Envisioning future applications of Augmented Reality: An agriculture 4.0 case study.

Werff, S.J. van der (2023) Towards a ball bouncing demonstration for the T-Flex.

Westerbeek, J.J. (2023) Item availability restricted.

Yadhukrishnan, (2023) Designing and Optimizing a flexible Battery Pack Manufacturing Process Incorporating Cylindrical and Prismatic Cells: Key Factors and Strategies.

Zijden, C.W.J. van der (2023) Analysis of an active tagline trolley system for offshore single blade installations with floating vessels.

Zijp, S.F. (2023) Remaining useful life estimation framework for maintenance improvement of a helicopter main rotor shaft using fracture mechanics.

2022

Al Kathemi, M. (2022) Roadmapping in the circular economy: achieving circular inflow and outflow according to the CTI framework.

As, D.M.M. van (2022) A novel electromagnetic guided medical device to improve outcomes of the septal myectomy.

Berg, Maarten van den (2022) Optimisation of the pultrusion process for carbon fibre reinforced polyurethane spar caps.

Bluiminck, M. (2022) Modelling and control of underactuated finger-based gripper with adjustable compliance for grasping of varying and deformable objects.

Boulogne, M.C. (2022) Designing the tapering of a radially oriented flexure joint.

Brink, A.P. van den (2022) Recharge yourself An autonomous drone charging solution.

Brink, E.W. van den (2022) Design of an adjustable torque device for XS-TOR implant.

Buitenhuis, Kilian F. (2022) Optimising the OPCAB simulator movement mechanism.

Buter, E.M. (2022) Design a novel device to locate and secure a metacarpophalengeal implant within the joint capsule.

Carmona Ortiz, Víctor Antonio (2022) Modelling of Robotic Hands: Kinematic and Dynamic Parameter Identification.

Doets, M. (2022) Mechanically activated in-vitro muscle model.

Duinmeijer, W.C. (2022) Method for manufacturing a hemofiltration fibre mat for use in a combined lung-kidney assist device.

Ekris, B.W. van (2022) Identifying dynamic critical components of a gantry based lasercutting machine using a validated FE model.

Eversmann, H.Y.N. (2022) Whole Life Carbon Thinking : market and data analysis of whole life carbon in Dutch renovation projects.

Forkink, L. J. (2022) Condition Based Maintenance : Improving the RAMS performance of movable bridges - A case study.

Irfan, Tekinerdogan (2022) Online platform for supporting the development of assistive technology tools for disabled people.

Jansen, S.L. (2022) Towards a parametric optimization tool for hydrofoil design.

Jong, H.N. de (2022) Design for stiffness constrained by additive manufacturing design rules : case study for an electronics enclosure.

Jonkers, H.R. (2022) 3D Printed Electronics.

Kerk, J.J. van de (2022) A Semi-Analytical model for Mode I delamination prediction in bolted bonded composite joints.

Kim, Woong (2022) Design and Control of Efficient and Powerful Robot Joints.

Kouwen, R.T.S. (2022) A novel methodology for robust projection-based alignment of automotive matrix-type LED headlights.

Lakshmi Narayan, P. (2022) Influence of industry 4.0 on manufacturing facility design process and outcomes of the facility layout.

Langen, I.N. van (2022) Development of patient-specific finite element models for the simulation of strain adaptive tibial bone remodeling after total knee replacement.

Limpers, W. (2022) Production process design in the sheltered workshop of VMI.

Loenhout, F.H.C. van (2022) Designing zero-mode waveguides for fluorescence experiments on α-synuclein and DNA.

Loman, G. (2022) Design of a stable steering mechanism for trikes : prevent the trike from tilting and keep your feet from the floor.

Lucas, W.E. (2022) Developing a design method and tool for producing customizable forming shoulders.

Luten, T. (2022) Characterization of the Onset of Boiling for Ammonia in Minichannels.

Maat, R. van der (2022) The use of a fully recyclable, biomass based thermoplastic as a wood coating.

Manten, Dion Jean François (2022) Technology roadmapping to develop the innovation strategy in engineering consultancy.

Meijers, R. (2022) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Moester, M.T. (2022) Development of Metamaterials for a Custom-fit Bicycle Helmet Liner.

Muetstege, C (2022) Demonstration of a multi-axis stepper motor in a robotic system.

Nijkamp, A.H. (2022) Modelling of laser beam absorption in powder-based sintering processes.

Nikolova, K. (2022) Framework and practical guidelines for creating a current state analysis for (re)designing an HMI within the Industry 4.0 era. Case study.

Ooijen, P.M. van (2022) 3D printing of sensorized pneumatic artificial muscle actuators.

Pennestri, Pietro. (2022) An FPGA based sensor fusion algorithm for IMU data processing.

Piening, P.V.L. (2022) Low frequency calibration of an acoustic vector sensor using immersive wave propagation.

Pindi Nataraj, P. (2022) Airfoil self-noise predictions using DDES and the FWH analogy.

Postmes, Jonne F. (2022) Maximizing energy absorption properties of 3D printed programmed auxetic metamaterials.

Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.

Rijt, J.T.J. van de (2022) Design of a Momentum-Based Optimal Controller for a Lower Limb Humanoid.

Roozendaal, R. (2022) Computational modeling of interstitial fluid in the brain neuropil for an improved understanding of solute transport in the brain.

Schermer, F.W. (2022) Computational modelling of cerebrospinal fluid flow in perivascular spaces.

Schuttert, W.J. (2022) Design and Optimisation of Roller Coaster Elements using Reinforcement Learning.

Siebers, E. (2022) Development of a method to assess the environmental impact of a system with a long life cycle : a case study on train films at Fleetshield.

Smit, G.J.F. (2022) Development of a Maintenance-based use policy and application to HNLMS Johan de Witt.

Stolwijk, B.A. (2022) Improving the ferrohydrodynamic pump for a magnetocaloric refrigeration cycle through modelling and experiments.

Thije, S.A.M ten (2022) Model-Based Systems Engineering Approach : Conceptual Design of the Powertrain for a 3D Motion Compensated Crane.

Tiggelen, Jip van (2022) An investigation on the nonlinear dynamic behaviour of jointed space structures.

Visser, F.F. (2022) Enhancing the Ti-PEKK hybrid joint by changing the PEKK crystal morphology.

Wesselink, Britt Anna Maria (2022) Differentiation of hPSC derived embryoid bodies to atrial and ventricular CMs in a trapping system on a chip : Defining requirements for asymetric differentiation on chip.

Wetsteijn, D. (2022) Characterization and Analysis of the MINIject Eye Implant.

Wicaksono, E. (2022) Smart metering to asset/human tracking for industrial applications.

Wijntjes, M.J. (2022) Robotic needle steering for prostate brachytherapy in a MR environment.

2021

Aalten, Thijs van (2021) Online optimization of EMG using a hybrid model approach.

Abhinaya, Antoinette (2021) Using Machine Learning to detect voids in an underground pipeline using in-pipe Ground Penetrating Radar.

Ambrosius, J.I. (2021) The effect of perturbing the angular momentum during walking on the balance strategy.

Arendshorst, M.G. (2021) Micro-pump optimization for applications in CubeSats.

Ariës, R.C.G. (2021) Exploratory research of friction stir extrusion additive manufacturing using AA6060 T6.

Basu, Akash (2021) Biomechanics in the Wild : a step towards validation of a wearable system for human movement analysis.

Berg, Rutger van den (2021) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Bogt, J.H.W. ter (2021) The influence of consolidation on bending behaviour of molten unidirectional fiber reinforced thermoplastic tapes.

Bolding, F.K.H. (2021) The effect of fatigue on leg- and joint stiffness during running.

Boogert, J.L. (2021) Mechanical fixation of a novel finger implant (APRICOT) for patients with early-stage osteoarthritis in the MCP joint of the thumb.

Bos, M.C. (2021) On pulsation in external gear pumps: CFD analysis and experimental investigation of pulsation in external gear pumps.

Bos, W. (2021) Design and implementation of a coaxial laser triangulation sensor in a laser metal deposition set-up.

Buiteveld, J. (2021) Techno-economic evaluation of a novel biomass pyrogasification process with an integrated sorption-shift system : a process for the conversion of waste to high-quality biochar and hydrogen with carbon capture and hydrogen upgrading.

Busink, K. (2021) 2D PIV experiments of oscillatory flow in a stenosis : a study into the physics of flow of cerebrospinal fluid.

Chua, EuChieh (2021) Management of safety hazards in residential buildings with multiple electrical energy storage systems.

Deo, P.V. (2021) Item availability restricted.

Doshi, Ajinkya Ajaykumar (2021) 3D printed interaction force sensors for robotic fingers.

Elderhorst, Tim R. (2021) Designing a Virtual Reality headset for amblyopic children.

Ganea, B.M. (2021) Design and implementation of a nonlinear model predictive controller for preliminary aerial physical interaction applications.

Ghantasala, Udaya (2021) Rain erosion performance of the material to be used as the leading edge protection of the wind turbine blades.

Hal, X.C. (2021) Identifying impact damage with the use of Piezoelectric transducers in a phased array.

Harish, Ashuthosh (2021) Estimation of the Frequency Response Function of a defective bearing from a measured uni-axial vibration signal.

Hartogsveld, Lars (2021) Designing a leaf holder for real-time microscopy.

Hoek, Jan van der (2021) Computational modelling of flow in the liver vasculature using the Lattice Boltzmann method to study microsphere distribution.

Hofsteenge, J.W. (2021) Implementation and Validation of FGM in CFX for the Description of Turbulent Non-Adiabatic Premixed Combustion.

Hooghiemster, A. (2021) Additive Manufacturing of Inconel 718 for Aerospace Applications : Towards Process-Microstructure-Property relationships.

Hop, Michael (2021) Design of an innovative natural ice skating rink.

Huizingh, M. (2021) Extensions and simulations of numerical model for picosecond laser-material interaction in bulk sapphire.

Janardhan, Gautam Geeta (2021) Simulation of rain droplet impact and erosion on leading edge protection of wind turbine blades.

Jansen, J. (2021) Control of soft robotic knee brace treating ACL lesion using iterative learning.

Jurjens, R.R. (2021) Repair/replace decision for ultra-precision milling machine.

Kaal, Joris (2021) Enabling Chip Characterization & Providing Chip Information : Characterizing fluid flow in a microphysiological system using PIV-experiments, Lattice-Boltzmann and COMSOL Multiphysics simulations and creating a tool to provide this information to users with a scenario-based rapid-prototyping co-creation process.

Kelder, R. (2021) Active Vibration Isolation with an Active Stage.

Klein Rot, J.E. (2021) Evaluation of a Force Controlled Pneumatically Actuated Knee Orthosis.

Klomp, E.J. (2021) Design of a flexible hollow hinge for a cryogenic environment.

Koets, Kelwin (2021) Design of an Innovative Siltation Removal System for Rolling Gates.

Kooistra, E. (2021) Prediction and validation of galling behavior in hot sheet metal forming processes.

Korenblik, J. (2021) Minimal sensing approach of an underactuated flexure based gripper for agri-food applications.

Kruize, Hendrik J. (2021) Improving Methanol Powered Solid Oxide Fuel Cell – Gas Turbine Power Units for Naval Support Vessels through Fuel and Heat Recovery.

Laerhoven, B.J.A. van (2021) Implementation of silicon nitride isolation trenches in SOI MEMS accelerometers.

Lanjouw, Mirthe (2021) The road to preventive and predictive maintenance for the CombiPlast.

Lavaniya, Saurabh (2021) Design of low airflow sensor to measure airflow near plants leaf.

Lübbermann, Thijs (2021) Design and control of a magnet placement tool.

Manen, B.T. van (2021) Learning to explore and map with EKF SLAM and RL.

Masmeijer, T.C.P. (2021) Vibration fatigue testing and modelling for identification of damage initiation and propagation in fiber reinforced plastics.

Materne, L.J. (2021) Is electric vehicle drivers’ cognitive workload increased by eco-driving feedback in the face of range anxiety?

Naik, Pratik (2021) Generating Sythetic Training Images for Instance Segmentation using Salient Object Detection and Image Compositions.

Nethe, Eamon G. (2021) Electrostatics for mobile glass cleaning robots.

Okken, Boi (2021) Design and Development of a Magnetic Non-linear Elastic Element and Control for Progressive Series Actuation.

Oosterveld, F.R. (2021) Investigation of delamination crack under vibration fatigue exploiting simulation driven dynamic testing in digital environment.

Overbeek, A.H.G. (2021) Passive and Stable Impedance Reduction of Hybrid and Flexible Link Serial Robots Using Position, Force, and Acceleration Feedback.

Overbeek, A.H.G. (2021) Passive and Stable Impedance Reduction of Hybrid and Flexible Link Serial Robots Using Position, Force, and Acceleration Feedback.

Palthe, A.M. (2021) Substructuring in flexible multibody dynamic models.

Peperkamp, M.W. (2021) Design and optimization of the pultrusion process toproduce reliable and recyclable wind turbine blades.

Rao, Bolar Vanishree (2021) A study towards the optimization of pultrusion processes: process - microstructure -property correlation.

Rous, E. (2021) Shopfloor Organization and management system : developing a software system for a matrix-production system.

Rozendal, S.P. (2021) Field-Weakening and Fatigue Management for Explosive Robotics.

Sathiyanarayanan, Prasanna (2021) Data Driven Feedforward Control of a 2-DOF Redundantly Actuated Manipulator with Flexure Joints using Machine Learning Techniques.

Sikkelbein, D.B. (2021) Process modelling for Model Predictive Control of Incremental Sheet Forming.

Stöver, P. J. (2021) Building a test setup for pulsed laser ablation in liquid flow.

Sutaria, S.S. (2021) Improving the dynamic performance of sewer inspection robot.

Tjepkema, W.W.A. (2021) Design of a surgical manipulator using smart materials.

Vacariu, P. (2021) PIRATE Robot Autonomous Navigation through Complex Pipe Networks using Reinforcement Learning.

Venezian, Roberto (2021) Control of Untethered Helical Robots at the Interface between Newtonian and Viscoelastic mediums.

Venkataramana, Shrikanth (2021) Effects of surface treatment on co-bonded wind turbine blade spar caps.

Westerveld, C.E. (2021) Generative Design : recommended actions to smooth the way for production of generative designs with additive manufacturing.

Wieringen, Seth van (2021) Transitioning to cost-optimal renewable energy systems under uncertainty.

Wittenstrom, B.K. (2021) Unifying state representation learning with intrinsic motivations in reinforcement learning.

Yang, Jinyi (2021) Towards process optimization of spar caps made of carbon fiber reinforced polyurethane composites used in wind turbine blades.

Zegwaard, Patrick Mr. (2021) Design for production of a diabetic-foot protector.

Zijl, Roy van (2021) Rate-Dependent Properties and Failure Behaviour of Glass Fiber Reinforced Isotactic Polypropylene Composite Laminates under Impact Conditions.

Zwiep, L.G.H. (2021) Mechatronic solution for stress-wave generation using impact echo.

2020

Akbari, Maryam (2020) Expediency of ATO in heavy rail : a decision-making framework.

Bessembinder, J.J.F. (2020) Development tpn module and user interface for the easycompounder.

Bhide, Gaurav (2020) Evaluation of the SUNRAM 5 for performing a full clinical in-situ breast biopsy procedure.

Blaauw, J.B. (2020) Structural dynamics simulation of a swinging fairground attraction using a novel implementation of reduced order modeling.

Boggelen, C. van (2020) Removal of volatile organic compounds and other odourous compounds using ozone generated by UV-C light in aerobic digestion installations.

Boiten, D.A. (2020) The development of a non-migrating knee orthosis.

Boro, Asutosh (2020) Theoretical and numerical modelling of sorption compressor system in a heat pump.

Brantjes, R.J. (2020) Analysis of a 3D printed whisker-inspired tactile sensor.

Budding, D.J. (2020) Techno-economic study of a power-to-hydrogen system in offshore wind energy.

Chrysanthou, M. (2020) The effect of a novel orthosis on ankle kinematics in simulated sprain.

Dafedar, Sajeed (2020) Develop and improve modelling capabilities of reactor vessel internals using ansys.

Dhau, Khansa Irsalina (2020) Optimal Integration Strategies for a Green Tiny House Energy System.

Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.

Froner Back, Lucas (2020) LES Analysis of coherence in a turbulent shear layer of an open jet wind tunnel.

Grafen, LN (2020) On the applicability of the mandrel peel test to characterize the fracture toughness of non-symmetric interfaces.

Groot, D.J.A. de (2020) Conceptual design of a microfluidic-based platform for medical diagnosis.

Jilderda, Christiaan (2020) Fatique in tubular structures: developing design tools that assist in analysing and optimising tubular structures that are subject to fatique.

Jong, S. de (2020) Arduino toolkit for the control of pneumatically actuated wearables.

Karuppannan, Sriganesh (2020) Analysis of various demand side management control mechanisms for a smart solar carpark.

Koster, B. (2020) Passive Mass Reduction in Admittance Control.

Krabben, I.G.W. (2020) Determination of the source term disturbing bounded flow performing practical Large Eddy Simulations.

Lerink, C.W. (2020) Visualisation of fouling during oil-in-water filtration using tubular ceramic membranes.

Leunissen, Ir. Anouk (2020) Estimation of the Centre of Mass Position, Linear Momentum, and Angular Momentum of a Human Wearing an Exoskeleton.

Liu, Jen-Wei (Luke) (2020) Towards an engineering approach of pool fire modelling with CFD.

Lobregt, Maarten (2020) Exploring an incremental pathway to the development of multi-use exploitation within offshore wind farms.

Loobergen, K. van (2020) Identification of damage precursors in 3D-printed aluminium alloy after fatigue testing.

Mathivanan, Rajavarman (2020) Texture Based Autonomous Reconstruction of 3D Point Cloud Models using Fully Actuated UAVs.

Mekers, R.L.J. (2020) Structural dynamics of roller coaster structures: transient analysis.

Mirwani, Yash (2020) Redesign of the PIRATE robot.

Nadgere, Nimish B. (2020) Haptic Rendering/Control for Underactuated QB SoftHand using Haption HGlove.

Nandi, S (2020) Reduction in Controlled Degrees of Freedom for a Cable Driven Variable Stiffness Actuator.

Neuvel, P. (2020) Developing a reliable method to connect conductors to 3d printed conducting structures.

Olthuis, M. (2020) Relevance and development of new rubber technology competences for a sustainable automotive industry.

Pakkirisamy, P.K. (2020) Control of exoskeleton using synergy-driven neuromusculoskeletal modelling.

Reuling, M.C.T. (2020) Mechanical interlocking of hybrid PAEK joints using additive manufactured : a study on mechanical interlocking performance and interlocking phenomena enhanced metallic surfaces.

Roodink, Sander (2020) Controlling deformations of a 3D-printed vibrating beam using stiffness modulation.

Rutten, L. (2020) Computational fluid dynamics in the stented arteria femoralis superficialis.

Sharma, Y. (2020) Rain erosion damage assessment using ultrasonics.

Simanjuntak, Denny Hariadi (2020) Derivation of crack growth law from high cycle fatigue vibration testing in thermoplastic-based composites.

Sirboiu, D.C. (2020) 3D printed acoustically transparent pressure sensor for breast cancer detection.

Smink, J.S. (2020) Investigation of Behaviour of Jet Shear Layer in Tandem Dual Jet Injection in Supersonic Crossflow using Schlieren Images.

Stroet, J. (2020) Impactor Design for In-pipe Impact-echo Inspection Method: A Morphological Analysis.

Vogelzang, Kevin (2020) Development and evaluation of a safe Fall Controller for a Lower Limb Exoskeleton using reinforcement learning.

Voorthuizen, K.L. van (2020) Uncertainty quantification in flexible multibody dynamics.

Wessels, B.J. (2020) A numerical study to help understand the effects of Nasal High Flow Therapy using the Lattice Boltzmann Method.

Wijk, BSc. Cedric F.C. van (2020) Design of a Small Wind Turbine Rotor and Hub for Wind Tunnel Testing.

Wijk, R.F.O. van (2020) Design of a Small Scale Wind Turbine Nacelle and Tower for Wind Tunnel Testing.

Zee, R. van der (2020) Cutter tooth replacement robot.

2019

Arendshorst, M.G. (2019) Validating the effect of vertically staggered wind turbines in the entrance region of extended windfarms.

Attema, Klaas-Jan (2019) Exergames: Portable and Enjoyable.

Beunk, L.D.R. (2019) Tangible Tools and Techniques: Co-designing with Locked-In Syndrome.

Blaauw, Jurjen (2019) Design of new test setups for characterization experiments of adhesives.

Boonk, K.F.J. (2019) Internship at Qirion: internship report.

Boonstra, Sander (2019) In vivo measurements of human tongue elasticity using a volume-based aspiration method : towards a personalized biomechanical tongue model.

Braakman, L. (2019) Assessing life cycle costs over increasing building circularity levels.

Chengappa, Rakshith Mukkatira (2019) Innovative sunlight driven thermal storage slurry for direct absorption solar collectors (DASC).

Choo, Jun Hong (2019) Impactor design and development for in-pipe sewer inspection robot.

Dasselaar, R.J. van (2019) Experimental and structural load assessment in wind turbine drive trains.

Dhau, K.I. (2019) The Effect of Woody Biomass Characteristics towards the Yield and Quality of Pyrolysis Oil at Twence.

Dragman, T.C. (2019) Identifying Dynamic Nonlinearities due to Damage Precursors in Flexible Structures.

Giorgio, Thomas (2019) A methodology on analyzing pressurized lip seal geometry under misalignment through glass.

Haan, R.J (2019) Increasing the arc-on time for the welding robots at ASN Holten.

Herpen, N. van (2019) Measuring relative bone pose inside a bi-lateral ankle exoskeleton using A-mode ultrasound.

Hoorn, H.E. van den (2019) Analysis of Dynamic Loads induced by Spinning Gondolas on a Roller Coaster.

Janbroers, J.M. (2019) Developing an MR safe calibration and interface module for pneumatic stepper motors.

Jonkers, H.R. (2019) Advanced internal combustion engine sensor analysis by means of modelling and real-time measurement.

Kaiser, Jesse (2019) Human lower limb gait analysis of walking on uneven terrain.

Kalter, Louweris Rémon (2019) Characterisation of damage in composite materials using infrared thermography.

Karuppusamy, Karthikeyan (2019) Development of physics of failure based prognostics feasibility tool for predictive maintenance.

Koers, Laurens (2019) Modelling of a ducted fan and its contribution to drag on a PAV hull.

Koopman, F.B. (2019) Improvement of longitudinal tracking and the addition of turning control of an underactuated moment exchange unicycle robot.

Kopinsky, Joël J. (2019) The design of an economic electric motorbike for urban commuting in the Netherlands : describing a design method that implements axiomatic design and is tailored to overcome the challenges of electrc motorbike design.

Laerhoven, B.J.A. van (2019) Modelling and characterisation of a pressure sensor implemented insurface channel technology.

Lenssen, J.A. (2019) Towards a steerable multi-module soft robotic endoscope for NOTES applications.

Lin, YuanXiang (2019) Design of Pneumatic Soft Surgical Robot for Endoscopic NOTES and MIS Application with Reduced size.

Linschoten, D. (2019) A Computer Aided Innovation Tool for Generating Solutions for Mechanical Engineering Functions.

Lotlikar, A. (2019) Design of a modular display trolley.

Maksane, A.R. (2019) A Decision-Support Methodology to design Reconfigurable Manufacturing Systems.

Manourat, Norrasaet (2019) The development of a cable-driven variable stiffness mechanism test bed.

Mateo, Mikel (2019) Myoelectric control of bionic hands via musculoskeletal modelling, admittance control and force feedback.

Napel, Ir. J.H. ten (2019) Design, fabrication and characterisation of a multi-purpose undirectional recirculation unit on-chip.

Overmars, K. (2019) Modelling of water wave propagation with FUNWAVE-TVD.

Panambur Venkatraman, V. (2019) A sensor fusion technique for head motion controlled endoscope camera system.

Polman, Harmen (2019) A Code for Refractive Index Matched Scanning Data Processing.

Rajanna, S. (2019) Item availability restricted.

Reekers, F.A.D. (2019) Internal logistics tire parts and material handling equipment : A discrete event simulation study for control rules.

Schepers, P. (2019) Application of a process model to define potential operational functional failure conditions.

Schilder, W. P. (2019) Design of a flexure-based tip-tilt-piston mechanism with high support stiffness.

Scholten, C.L.P. (2019) Embodiment of prostheses : becoming part of the body-image.

Spanjer, S.T. (2019) Acoustic and vibration analysis of an electric powertrain for passenger cars.

Timmer, Rick Nando (2019) Project Manager at Schrader T+A Fahrzeugbau: Redesign of production process.

Valk, Y.A. de (2019) A novel construction of wind tunnel models for wind energy applications.

Vallinas Prieto, Ander (2019) Time-domain passivity enforcement for mass reduction in admittance control.

Vermeulen, J.J. (2019) Flexible multibody dynamics of an Afterburner-type fairground attraction.

Werf, MSc S.IJ. van der (2019) Macroscopic single contact properties of cohesive silanized glass beads.

Wijk, C.F.C. van (2019) Numerical Simulation on Interface Instability under Reshock.

Wijk, R.F.O van (2019) Thermodynamic Optimization of Organic Rankine Cycles for Co-Generation from Low Enthalpy Ultra-Deep Geothermal Reservoirs.

Wijmans, Nora (2019) Effective laundry : a design engineering approach for laundry systems in small, off-grid, sustainably minded communities.

Wilpshaar, Martijn (2019) Conceptual design & experimental validation of Mars helicopter.

Zuiderduin, E.R. (2019) Optimizing Geometric Parameters of a Coaxial Nozzle for Direct Bubble Writing.

Zwijgers, E. (2019) The effect of partner performance on arm impedance modulation during haptic human-human interaction.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.

2018

(2018) Item availability restricted.

Akker, B.P.H. van den (2018) Durability of co-bonded stiffened CFRP panels subjected to post-buckling fatigue.

Barbero, Marta (2018) Reinforcement learning for robot navigation in constrained environments.

Beelen, S.J. (2018) Lagrangian Trajectories Method with Bubble Dynamics for Cavitation Inception Predictions.

Berns, L. (2018) Item availability restricted.

Beugels, F (2018) Non-destructive testing of solid propellant rocket motors.

Bianchi, Filippo (2018) Friction stir welding of aluminium-lithium alloy for next generation European launcher. Feasibility study on redesign, analysis and implementation on Ariane 6 first stage (VUAB).

Braakman, Patrick (2018) Item availability restricted.

Braam, L. (2018) Do simplifications in the intitial set-up matter?

Bruinsma, S.J. (2018) Development of a diagnostic tool based on Continuous Scanning LDV output spectra.

Chengappa, Rakshith Mukkatira (2018) Charcoal cooling.

Cornelissen, Robin and Pouwels, Astrid (2018) Item availability restricted.

Desai, A.S. (2018) Modular pallet design.

Desai, Amit (2018) Threaded plug & ring-assembly station design.

Diepeveen, H. (2018) Redesigning the evaporator for the Triogen ORC (Organic Rankine cycle) for use in the containerized version of this ORC (the so called Triogen E-box).

Dijk, W. van (2018) Item availability restricted.

Ettema, Bart Robbert (2018) Experimental Determination and Validation of Pressure Through a Porous Medium.

Evertzen, Luc (2018) The aerodynamic design of RED Shift : Solar Team Twente’s 7th solar car.

Ganseij, M. (2018) Item availability restricted.

Gerritsen, J. (2018) Item availability restricted.

Gifari, Muhammad Wildan (2018) Study on the Design of Soft Surgical Robots for Endoscopic NOTES Application.

Graziosi, Damiano (2018) Toward spatial impedance estimation for robotic systems.

Haan, Sven de (2018) Possibilities of performance and condition monitoring at Rijkswaterstaat : Internship report.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Hees, N. van (2018) Development of a functional thumb orthosis for boys with Duchenne Muscular Dystrophy at Hankamp Rehab.

Heidemann, Claudia (2018) Characterisation of a nano-g accelerometer.

Heijs, J.A.N. (2018) Material overview and documentation update, with identification of elimination candidates.

Herpen, Noud van (2018) Assessment of substitutive vibrotactile feedback for performing object manipulation task with prosthetics.

Hooft, D. 't (2018) Item availability restricted.

Jansen, Jorn (2018) Endoscopic end effector control using soft actuator.

Jimenez, J.J. (2018) Design of an Electro-Hydrostatic Actuated Ankle-Foot Orthosis.

Kamermans, M. (2018) Short time degradation of thermoplastic composites during stamp forming.

Kehayan, M. (2018) TICC : A CNC calculation tool.

Keizer, R. (2018) Item availability restricted.

Kleissen, R. (2018) Increasing tolerances of the body panel fit on a hybrid chassis.

Koopman, Frederik (2018) Design of a Matlab based graphical user interface for visualization and enhancement of floor dynamics.

Lammers, Marcel (2018) Item availability restricted.

Laméris, Mark N. (2018) Off the grid : Micro Hydro Power.

Landriscina, Giovanni (2018) High lift noise reduction with carbon nanotubes thermophones.

Lange, M. de (2018) Item availability restricted.

Leijen, Niels (2018) Low-cost silicon-based resistive load cell suitable for asymmetric loads.

Mak, Y.X. (2018) Head Motion Controlled Endoscopic Camera Manipulation using Inertial Motion Sensor and Mixed Reality Headset.

Meijer, S.D. (2018) The implementation of collision avoiding haptic feedback in the pedal-based control of a robotic platform.

Mes, T.G. (2018) Updating rotating documentation in Grade 5 Nouryon Rotterdam Botlek.

Meyere, K.P. de (2018) Model making and haptic controller design for the ReFlex TakkTile.

Nesselaar, A. (2018) Development of a system to measure the skin temperature of the feet at the University of Calgary.

Niehoff, Dennis (2018) Evaluation of Motion Control Algorithms for Miniaturized Agents Moving Inside 3D Fluidic Microchannels.

Nijenhuis, Nienke (2018) Developing a method to help engineers find solutions from nature and technology within the TRIZ method.

Nijhof, Daniël (2018) Data Acquisition and Control of the Combustion Test Cell.

Nijhuis, B. (2018) Investigation of the Scope and Limitations of Gradient Enhanced Crystal Plasticity in Explaining Macroscopic phenomena.

Oosterhuis, Hanne (2018) Item availability restricted.

Op 't Ende, W. (2018) Writing a proposal for the EU's Horizon 2020 program in the field of medical non-adherence.

Petter, J. (2018) Procesbeheersing door Single Piece Flow : de implementatie bij de pneumatisch bediende afsluiters.

Poortema, K. (2018) Transport binnen het productieproces : de optimalisatie van routes van afsluiters op de werkvloer bij HP Valves.

Poppelen, Maarten van (2018) Mini-traineeship internship at Damen Shipyards.

Raghunatha Reddy, V. (2018) Supersonic expansion of liquid and gaseous carbon dioxide.

Raghunatha Reddy, Vatsala (2018) Supersonic Expansion of Liquid and Gaseous Carbon Dioxide.

Rindt, Felicia (2018) Assessing the Carbon Footprint of RARCC and Papua Diving in Raja Ampat, Indonesia.

Sankara Subramanian, G.K. (2018) Improving the prediction of pressure gradient field in wind farm numerical simulation method, WAKEFARM.

Santana, Tiago de (2018) A feasibility study of electric cars powered by solar energy : The cases of The Netherlands, Norway and Brazil.

Smit, H.J. (2018) Item availability restricted.

Suyanti Hersanto, Suyanti (2018) Item availability restricted.

Tan, D. (2018) Item availability restricted.

Teeffelen, K.J. van (2018) Intuitive Impedance Modulation in Haptic Control using Electromyography.

Tichelaar, J. (2018) 3D-printed implementation of a tactile force sensor working in multiple DOF.

Veenstra, S.W.P. (2018) Item availability restricted.

Velde, Lennart van de (2018) Computational Fluid Dynamics : a clinician's tool for Femoral Artery Stenosis?

Velten, R.H.E. (2018) Item availability restricted.

Velu, E.V. (2018) Design of a sit-to-stand controller for a lower limb exoskeleton and validation by feasible crutch usage identification.

Verboom, A. (2018) Item availability restricted.

Veugelers, Manuel (2018) Design and validation of clamping system for Wire and Arc Additive Manufacturing.

Vos, Ids de (2018) Item availability restricted.

Vries, J.F. de (2018) Redesign & Implementation of a Moment Exchange Unicycle Robot.

Waasdorp, W.P. (2018) Influence of suboptimally forced streamwise streaks on the turbulent boundary layer and shear layer.

Wieringen, Maxim van (2018) Efficient repurposing of 2nd life EV Lithium-Ion batteries to speed up the energy transition to affordable renewable energy storage in social housing.

Wisselink, W.J. (2018) Future Flamco : a scenario-based simulation approach for smart intralogistics.

Woord, H. ter (2018) Modeling the pressure drop in pipelines transporting highly vicous non-newtonian sludge.

Zeldam, S.G. ten (2018) Automated Failure Diagnosis in Aviation Maintenance Using eXplainable Artificial Intelligence (XAI).

Zuiderduin, Ewout R. (2018) The designing process of a long distance steam transport system.

Zuurveld, Jasper (2018) Analysis of the ventilation system.

2017

Abbekerk, T. (2017) Item availability restricted.

Altena, Thijs (2017) Better to prevent than regret : gain insight in how to measure the performance of Bolletje's Technical Department to create a preventive maintenance plan.

Andree, D.J. (2017) Thermal Analysis of a heavy duty drum motor.

Assema, P. van (2017) Item availability restricted.

Batista, M. (2017) Design and development of two medical devices to assist the rehabilitation of the upper limb mobility in post-stroke.

Belt, M. van den (2017) Using modal derivatives to determine the behaviour of mode shapes and natural frequencies during large deflections.

Berntsen, J. (2017) Formability of G/PP composites : effects of defects.

Beugels, F. (2017) Failure analyses on the Lint trains operated by Arriva Tog Danmark.

Boer, C.A.G. de and Meijden, D. van der and Versluis, W.D. (2017) Item availability restricted.

Boers, Tim (2017) Personalized endovascular stent grafts : Re-inventing the personalized stent graft and its production process; a finite element analysis.

Boom, R. (2017) Structural Health monitoring for landing gears.

Braakman, R. (2017) Redesign of the Shoulder Elbow Perturbator.

Bramer, K.J.J. (2017) Designing and prototyping a small scale steam driven jet pump.

Bremer, S.J.L. (2017) Item availability restricted.

Brink, J. van den (2017) Re-design of the heat exchanger in a thermo-acoustic heat pump using C-lamel fins.

Deijlen, Lisa (2017) Experimental research on cavitation in a water tunnel at the University of Michigan.

Dekker, J.J.J.W. (2017) Programming for MrReves (Reden virtual engineering system) in C#.

Den, Michael ten (2017) Design of a pneumatic Dual-Drive Planetary actuator to improve the velocity of MR guided manipulators.

Dijk, J. van (2017) Commissioning of an Flame Reactor for Research on Entrained-Flow Gasification.

Dzulqarnain, A.R. (2017) Distributed Processing for Operational Modal Analysis of Bridge Infrastructures Using Wireless Sensor Networks.

Elawady, Karim (2017) Compressor pipeline wall temperature analysis during depressurization including condensation effects.

Euving, E.J. (2017) Developing an energy observer for energy bookkeeping.

Euving, Stephan (2017) Fluid flow in the cement layer of Mono-Diameter wells during casing expansion.

Fang, R. (2017) The application of the ISO55000 improvement loop & the improvement of maintenance concepts at Strukton Rail.

Ferreira Nascimento, Leonardo Teodoro (2017) Synthesis optimization of energy systems maximizing regional profit.

Gaete Haller, P.J. (2017) Data Analysis for installed PV Systems in the Netherlands.

Gajadin, R.D. (2017) Dry Gas Seal Reliability and the Development of Prognostic Models.

Gemerts, Earvin (2017) Item availability restricted.

Geurts, Peter (2017) Development of a vane motor servo system for precision positioning in an MRI- or CT-environment.

Gies, S.H. (2017) Ornithopter flight dynamics : measurement and analysis of the Robird's Flapping Wing.

Gouw, R.H. van der (2017) Development of a tyre monitoring system.

Groeneveld, G. (2017) Design of vacuum components for FERP-technique characterization system.

Groot, N.D. de (2017) Part 1: “Arc welding standard for production & quality inspection” Part 2: “Implementing the principles of lean in a productive classroom”.

Hannink, M.J.M. (2017) Heat exchanger shape optimization : using adjoint method ansys fluent.

Hanoun Saado, A. (2017) Storage prognosis of large components during the peak period at Siemens Hengelo.

Hoeksema, V.L. (2017) 3D Transient and crystallization model for laser assisted tape Winding.

Hout, N.B. van den (2017) Developing a dedicated tool to support the development of domestic boilers for a circular economy.

Iordache, C. (2017) Radial lip seal design parameters and simulations : influencing leak-rate parameters.

Iordache, C. (2017) Adjoint-based optimization study of a heat exchanger : single and multi-objective shape optimization.

Jager, J (2017) Joint level modelling, characterisation and torque control of the SHERPA robotic arm.

Karaliolios, E.C.J. (2017) Energy modelling analysis of Heffron Hall.

Knaap, Bart van der (2017) Virtual testing, strain correlation for loads optimization of composite fuselage structure.

Kolkman, D. (2017) Validation of a Reynolds number correction method.

Korbee, W. (2017) Mattress Loading plan generator.

Kurylek, R. (2017) Measuring the acoustic properties of rocket engine faceplate configurations DLR-LA-HF-RP-086.

Lassche, T.H. (2017) Internship Brink Group B.V.

Leede, M. de (2017) Solid state additive manufacturing : A study to understand the bonding process of friction surfacing using AA2024-T351 onto AA2024-T351.

Lei, L.H. (2017) Numerical modelling of non-linear shallow water waves.

Lerink, C.W. (2017) Extension of the Eilmer4 Gas Package.

Lieftink, R.J. (2017) Design of an anti-slip control system of a Segway RMP 50 omni platform.

Linschoten, D. (2017) Item availability restricted.

Maag, S. de (2017) Validation of Eilmer4 for impinging shock interactions.

Meer, J.N. van der (2017) Project Evaluatie. Stage Rapport TCPM.

Meijer, H.J. (2017) Active control of time-varying broadband noise and vibrations with parallel fast array recursive least squares filters using online system identification of the secondary transfer path.

Mulder, L. (2017) LAT100 Resonance investigation.

Mulder, L. (2017) Applied frequency-domain system identification in the field of experimental modal analysis.

Nguyen, M.D. (2017) CFD Feasibility of oil flow around a bearing ball-raceway contact with Star-CCM+©.

Nijensteen, G.A. (2017) Item availability restricted.

Okken, B. (2017) Design and Empirical study of tilting propellers of an over-actuated quadrotor.

Otjens, T.C. (2017) Effectiveness improvement of Nelson Pine MDF sawing machine.

Perea Almenar, J .V. (2017) Evaluation and analysis of a new alloy for element material in CVT.

Pierik, Rens (2017) Item availability restricted.

Plaisier, Thomas (2017) Reducing apparent inertia in a tool for minimally invasive surgery.

Post, F. (2017) Certification of a small wind turbine.

Prieto Serratos, Erik Armando (2017) Multilevel panel method validation using the New MEXICO Wind Tunnel Measurements.

Rakuša, Anej (2017) Go 400 & Energize.

Rensen, Quinten (2017) Item availability restricted.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Sanders, R.V. (2017) Active heave compensation - simulation of a prototype heave compensation system.

Schasfoort, K.B. (2017) Temporary fixation using vacuum for the Total Epicardial Delivery Device (TEDD).

Schonewille, R. (2017) Design of an energy harvesting system for wireless sensor nodes on railway tracks.

Schut, Thomas (2017) Sensing of multiple parameters in a micro-fabricated flow system.

Schuttert, M. (2017) Camera, PLC and servomotor control.

Siddiqui, M.Z. (2017) 3D Printing : depowdering techniques.

Sikkens, Boudewijn N.A (2017) Modelling, design and fabrication of a 3D force sensitive stylus.

Smit, Stefan (2017) Item availability restricted.

Trouwborst, C. (2017) Towards increased autonomy of a rail-guided robot for the inspection of ballast water tanks.

Vaithiyanathasamy, R. (2017) CFD analysis of 2D and 3D airfoils using open source solver SU2.

Vaithiyanathasamy, Mr. Rajesh (2017) Double wake model for separated flows over airfoils.

Venterink, M. (2017) Frequency optimisation for damage identification using the Vibro-Acoustic Modulation method.

Vluttert, N. (2017) Item availability restricted.

Welleweerd, M.K. (2017) 3D Printing a three degrees of freedom force sensor.

Wilk, F. van der (2017) Item availability restricted.

Will, J.B. (2017) Aerodynamic noise of thin airfoils in turbulent flows : a detailed experimental validation of semi-analytical methods.

Windt, Lennart van der (2017) CFD icing analysis steps on a three dimensional, swept, tapered and twisted wing.

Wolff, T.I. de (2017) The Design and Fabrication of a Biomimetic Lifting Aid.

ZHU, H. (2017) DEVELOPMENT OF SMART INDUSTRY MATURITY MODEL.

Zhang, J. (2017) Actions towards decarbonization : modelling in climate change policies.

2016

Abdelaziz, Mohamed Essam Mohamed Kassem (2016) Designing, implementing and integrating a controller for the MRI compatible robotic breast biopsy system.

Alan, G.A.S. (2016) Compressor temperature during blow down.

Alan, G.A.S. (2016) Parameter study of a staggered pin-fin heat exchanger using openfoam.

Beekman, J.L. (2016) Experimental investigations of a magnetic levitation system and the comparison with simulations.

Belt, M. van den (2016) Design of amusement rides.

Berghuis, D.P.J. (2016) LEAN manufacturing in de elektro assemblage.

Bokhove, T. (2016) Improving the model management workflow.

Boom, R (2016) Vehicle response on standardized tracks.

Boon, J P (2016) Designing a sustainable and energy-neutral business park.

Bouwhuis, T. (2016) Investigation into a new simple DBD-plasma actuation model.

Broenink, W.A. (2016) Oxycoal combustion tests in CIUDEN.

Budiman, A.H.S. (2016) Modeling of magnetocaloric refrigeration with packed bed regenerator.

Buitink, M.N. (2016) Impact van het 20 kV beleid van Liander op de netverliezen in het middenspanningsnet.

Bukai, E. (2016) Design of a novel needle steering manipulator for minimally invasive guided breast biopsy.

Burghout, R.A.B. (2016) Exploratory CFD research on a Coriolis mass flowmeter.

Busker, B. (2016) Task specific information visualizations using head-mounted display technology.

Böke, M. (2016) Direct aeroacoustic simulation using compressible flow solver.

Cijsouw, J.W. (2016) Crossing Obstacles.

Dickhof, H. (2016) Design and construction of a spray pontoon and maintenance of HAM 310.

Diepen, T. van (2016) Categorizing and prioritizing lifetime impacts for Asset Lifecycle Plans.

Dijk, N.J.G. van (2016) Internship Rolls-Royce Deutschland : aeroacoustics and noise.

Dixhoorn, F. van (2016) Evaluation of the Potential of Diaper Recycling Within AEB Amsterdam.

Drenth, B. (2016) Experimental validation of simulations on flow through venturis and diffusers.

Eisma, T. (2016) Pass by noise simulation.

Euving, S. (2016) Turboprop engine - Compressor test RIG.

Feldbrugge, Berend (2016) Development of an optimisation process for pre-swirl stator designs.

Flanderijn, S. (2016) Developing a dynamic model of a pyrolysis plant for an operator training simulator.

Geerligs, H. (2016) Techniques for in-flame measurements.

Groen, B.J.H. (2016) Internship Nedcon.

Groendijk, H.A. (2016) Ultrashort laser processing of glass : cutting and micro surface structuring of soda-lime glass.

Haar, D. ter (2016) Design of droplet impingement measurement set -up.

Haar, W. van der (2016) Assessing the appropriateness of additive manufacturing : Development of a knowledge based assessment methodology to determine appropriateness of additive manufacturing for an organisation.

Hadisaputro, Yosia Giovanni (2016) Combination of Phase Change Material with concrete for foundation uses.

Hart, K. 't (2016) An investigation to find the optimal maintenance interval for escalators based on their usage.

Hartjes, P.C. (2016) Design case : composite sensor module.

Hartog, Wilmar den (2016) Heat transfer to sub- and supercritical water flowin a vertical tube at lowmass fluxes.

Heide, S.O. van der (2016) On the design of a water temperature control module for bulk solids heat exchangers.

Hekman, T. (2016) Building an active noise control demonstrator.

Hendrix, J.M. (2016) Impedimetric detection of cancer derived vesicles: combining smart sieves with nanogap capacitors.

Jansen van Rosendaal, N A (2016) 2D Quench propagation modelling in COMSOL.

Johannink, T.A. (2016) Design of a decision making model to aid in the development of medical technology.

Kalas, V.J. (2016) Assesment of influence of play in joints on the end effector accurcay in a novel 3DOF (1T-2R) parallel manipulator.

Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.

Kamphuis, A. (2016) Internship as Trainee Patent Attorney.

Kerssens, P (2016) Laser-induced cavitation in acoustically levitated droplets.

Kishore, R. (2016) Photoelectrochemical Water Splitting Using Metal Oxides.

Klein, H.D.T. (2016) Evaluation of the use of deconvolution algorithms for determination of trailing edge noise levels.

Klompe, A.J. (2016) Multitooltrac rowcrop 80, op zoek naar een nieuwe toepassing.

Klooster, S. (2016) SGT-600 Lube Oil System Simulation.

Kuipers, P. (2016) Test analysis report :improving finger simulator & plethysmograph filtering for nano core.

Leede, M de (2016) The analysis and redesign of a ship cradle.

Leijtens, N (2016) Design of an Energy Storage System for Pacific Islands.

Liefers, R.J. (2016) Internship at quality management of electrical drivetrains and special engines at the BMW Group in München.

Lith, L.D. van (2016) Functionalization of Poly-(ethylene glycol)- diacrylate (PEGda) with different molecular mass using Two-Photon-Polymerisation.

Louter, V.M. (2016) Development of a method to compensate for non-circular pipes for cutting devices.

Luo, Y. (2016) Concept design of tracked stinger roller box.

Madhar, M.C. (2016) Towards the design of a vibration monitoring system for a rotor blade system in operation : an experimental investigation.

Meer, A.J.M. van der (2016) Mapping the underworld.

Meijvogel, D.T. (2016) De structuur van het innovatiesysteem van BIPV.

Molder, D A M te (2016) Condition monitoring and testing of piezo elements for the activation of guided Lamb waves & damage identification using ultrasound scanning.

Molenkamp, D.J. (2016) The off-design performance prediction of centrifugal compressors.

Nijland, L.K. (2016) Internship Nakilat Damen Shipyards Qatar.

Noord, N. van (2016) Assisting the management team of Frijns Structural Steel in order to develop a tool to gain more control over the projects and the production in the company.

Oliveri, G. (2016) Developing a parametric model for Air Bearing calculations in COMSOL and further refinement of the currently existing models.

Ooms, B.R.J. (2016) Design of Flexible connection system elements and damage inspection of Slingbuoy 2.0.

Ooms, E.M.J. (2016) Optimization and redesign of actuators for a medical device.

Otter, R.A. (2016) Dynamical analysis of amusement rides.

Pas, S. ten (2016) The influence of y+ in wall functions applied in ship viscous flows.

Pijper, C.C. de (2016) Improving the microfirm concept.

Plender, J.B. (2016) Internship at Flanders' Bike valley.

Plura, F. (2016) Part optimization design studies in the modern aircraft industry.

Ramaker, K.A. (2016) Plasticity and fracture modeling of composite steel Tribond 1200 for crash simulation.

Reijmer, J.G.J. (2016) Calculating the overpressure in a tyre cavity due to tyre movement and compression.

Ridderhof, C.P.J. (2016) KnowledgeManagement System Pilot Exploration of knowledge management.

Rolff, G.J.M. (2016) Item availability restricted.

Roodink, T. (2016) Literature review on stabilizing high speed valve- and drivetrain concepts for racing applications.

Rossides, Charalambos (2016) Design and implementation of a modular, customizable and multi-modality compatible actuator with position feedback.

Rutgers, J (2016) Dynamic modeling of a heat exchanger.

Sanders, R.V. (2016) Modelling and simulation of traditional hydraulic heave compensation systems.

Schakel, E.J. (2016) Investigation of the Coffee Grinding Process.

Scheper, B.J. (2016) Simulating mixing machines using MercuryDPM.

Schimmel, N. (2016) Measurements and control of mould oscillation during continuous casting of steel.

Schonewille, R. (2016) Analysis of tram wheel wear at RET.

Sedee, K.M.J. (2016) Key Performance Indicators.

Siepman, D.C. (2016) Automation of the post-processing procedure of numerical modal tyre vibration analyses.

Sinha, A. (2016) Optimization of warehouse processes & automation of packing line.

Slot, J.J. (2016) Design of a human-powered juicer device.

Stijlaart, E. (2016) Effects of Disalignments in C/PPS laminates : a study on a possible method to predict warpage induced by disalignments.

Strijdveen, M.M.A. (2016) Strength assessment of bolted connections : the effect of geometric non linearity and stress stiffening on bolt stresses.

Talele, A.S.T. (2016) Inertia driven controlled passive actuation with the Dual-Hemi CVT.

Timmer Arends, J.H. (2016) Design of a dynamic weigh system for conveyors.

Timmerman, M. (2016) Characterizing GCLAD as a non-contact detector for biomedical applications.

Vandeursen, B. (2016) Mechanical design of a whole house ventilation unit.

Vikram Ramesh, V. (2016) Wear of polymers : precision trimmer.

Vluttert, N. (2016) The absorption of moisture by metal powder in a humid environment and the effects on its composition.

Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.

Will, J.B. (2016) An experimental study of heat transfer and flow dynamics in a multi-layer Rayleigh-Bénard convection cell.

Windt, A. van der (2016) Pre-assessment tool for achieving Net Zero energy in New Zealand schools.

Wissink, B.W. (2016) Regularizing discontinuities based on filtering using dirac delta kernels.

Wolf, E.R.B. de (2016) Designing an interaction method for the holograms of today.

Wolf, T. (2016) Design of an Air Factor Sensor based on Light Emission.

2015

Aman, B.J. (2015) Door construction.

Anema, J.S. (2015) Modeling and improvement of a field electric retarding potential characterization system.

Balistreri, G. (2015) Potential of Additive Manufacturing in the after-sales service supply chains of ground based military systems.

Beekman, P. (2015) Design and modelling of solar tower field components.

Beem, P.H. (2015) Associate Consultant Intern at Bain & Company.

Bekker, S. de (2015) Design of OLED Capsule and automated blade coater.

Benthem, A van (2015) Determination of design resistance by finite element analysis.

Bhagwandas, J.C. (2015) Energy from the sea : hydrothermal liquefaction of algae.

Bima Angunn Putra, A. (2015) Feasibility Study of Power to Gas Technology at Twence.

Brands, D. (2015) Preforming process simulation.

Brentjes, A. (2015) Modelling liquid sloshing in rotating t anks.

Brouwer, W.R. (2015) The application and comparison of multistep ice accretion analyses.

Brummen, S. van (2015) Aerodynamic analysis of the EFTV-ESM and separation dynamics in hypersonic flight conditions.

Bullee, P.A. (2015) Natural convection flows inside differentially heated cavities.

Bullee, P.A. (2015) Development of an ice accretion code suitable for mixed-phase icing conditions.

Buren, P. van (2015) Inspectieplan onderhoud in de bottelarij.

Derkink, I.H. (2015) ORC Evaporator fouling by biomass combustion.

Detert Oude Weme, D.G.J. (2015) Designing an Induction Wind Tunnel.

Deunk, F.H.J. (2015) Additive manufacturing with friction surface cladding.

Diepen, T. van (2015) Design for vacuum systems.

Duisterwinkel, F.J.F. (2015) Improving convergence of numerical optimizers using a limited number of function evaluations.

Eekelen, L.D.P. van (2015) Reduceren van het aantal uren in het volgoed magazijn door het gebruik van de DMAIC methode.

Eijkelkamp, A.J.F. (2015) On experimental en numerical analysis of combustion processes in a gas turbine for large civil planes.

Engler Faleiros, D. (2015) Wind tunnel Investigation on Trailing Edge Noise Mitigation via Sawtooth Serrations.

Fokkens, Dirk-Jan (2015) A practical approach to maintenance performance measurement: shifting the focus from the alignment with strategic objectives to the managerial possibilities to iprove maintenance effectiveness and efficiency.

Gooijer, B.M. de (2015) Model predictive control of forming processes.

Goossens, M. (2015) Modeling a vapor compression cycle : report internship Aeronamic.

Grinten, B.A. van der (2015) Port based Hamiltonian modelling of flapping wing aeroelasticity using vacuum chamber and wind tunnel measurements.

Haitsma, O. (2015) Flexible packaging engineering.

Haverkate, R.W.M. (2015) Verloren was method : stageverslag in het kader van production management.

Hazel, B. van den (2015) IMPACT MECHANICS OF HELMET COMPONENTS.

Heijdens, E.J.H. (2015) Internship report Huisman.

Hekker, A.S. (2015) Internship Report - Meshing SGT 4000F Hybrid Burner.

Horst, A. van der (2015) Life cycle analysis of non return valves.

Huiberts, J. (2015) Stability of the bubble cushion during contactless boiling in micro-evaporators.

Jin, H. (2015) Use the laser engraving machines to achieve laser cleaning, laser post-melting and roughness control of the anilox rolls.

Jindelt, T. van (2015) Automated mesh generation for the rotator section of a radial inflow turbine.

Jong, R. de (2015) Improving a traction winch drum design engineering calculation.

Kroezen, R. (2015) Analysis Customer Support at 'payleven'.

Kruijk, T.R. (2015) Influence of aileron oscillation and gap size on aerodynamic control derivatives.

Käser, R.H. (2015) Flamelet Generated Manifold in ANSYS Fluent and ANSYS Workbench CFD Automation and Optimization.

Labee, R. (2015) Design and realization of composite molds for a solar car.

Lamboo, S. (2015) Grid importing for CFD simulations of turbomachines.

Lammers, K.H. (2015) Aerodynamic CFD analysis on experimental airplane.

Lassche, T.J. (2015) Research into compliant bistable mechanisms with the application in the design of an easy-chair.

Linden, S. van der (2015) Numerically modelling artificial surfing waves in a circular wave pool.

Lubbers, R.G.J. (2015) Design of an automated blade coater & d esign of a gas mixer for a CVD system.

Láoh, T.A. (2015) Numerical simulation of ice accretion on a propeller blade.

Madhar, M.C. (2015) Thermal validations of the linear actuator at VDL-ETG.

Mak, Y.X. (2015) Realization of mini segway robot using NI MyRIO.

Mertens, R. (2015) Feasibility research: Design of a mini-Tension Leg Platform foundation for a 6MW Wind Turbine.

Mil, K. van (2015) Internship at the Royal Grolsch.

Nauta, H. (2015) Means and methods for modal building analysis.

Naves, M. (2015) Design of a continuously variable transmission for efficiently actuating walking robotic sensors.

Olimulder, R.J. (2015) Low flow, high head.

Oosten, M. van (2015) Composite : Metal connections for the automotive industry.

Puttkammer, P.P. (2015) Sound transmission in turbomachinery flow ducts.

Reekers, F.A.D. (2015) Implementation planning in manufacturing company.

Reichardt, J.M. (2015) Internship Report Jasper Reichardt.

Rietema, M.J. (2015) Design of a prototype machine for 3D printing with continious fibre reinforcement.

Roke, H.D. (2015) Installation of a Tendon Leg Platform Offshore.

Roo, M. de (2015) Optimal Event Handling by Multiple UAVs.

Roozing, G. (2015) Design of Planetary System to resolve film thickness variation in Film Deposition.

Scholten, W. (2015) Evaluation of handling of trucks.

Schonenberg, W. (2015) Improving the HUMS capabilities of an EC225 Helicopter by training a model for automatic failure detection of an oil cooler fan shaft.

Schoo, E.H. (2015) Opzetten van een begrotingsprogramma voor hout-gestookte warmtekrachtkoppelingen in Excel.

Schot, T.M. (2015) Using sea turtle biomimetics for increasing swimming efficiency in humans.

Schuurman, M. (2015) Analysis and redesign of the electric driven clamping mechanism of Stork Injection Moulding Machines.

Siemons, S.K. (2015) Aerodynamic interaction between wing and truss in transonic flow.

Slaper, A.R. (2015) Numerical Simulation over a backward facing step with OpenFOAM.

Stoutmeijer, K. (2015) The influence of slugs on pipe supports : improving the design parameters for Caesar II.

Tan, D.J. (2015) Modelling Pilot Pitch Control : analysis of human-in-the-loop dynamics from a control theory perspective.

Tanuhardja, C.C. (2015) Capacity planning.

Terpstra, J. (2015) Modeling a two-phase mechanically pumped loop.

Teunis, G.E. (2015) Output-only modal-based structural health monitoring in composite beams.

Titus, S.S. (2015) The implementation of the Arbitrary Lagrangian Eulerian method into a FEM - Discontinues Galerkin Solver.

Ved, M.M.M. (2015) Evaluation of the Valve-less Flooding System & Re-design of Hot Stab Guiding System.

Venterink, M. (2015) Analysis and redesign of the rotating shut-off nozzle of Stork Injection Moulding Machines.

Versteegh, M.P.M. (2015) Concept en model ontwikkelen welke in staat is om uitwerpselen automatisch op te ruimen.

Voormolen, M.S. (2015) An improved bending model for thermoplastic composites in forming processes.

Vries, W. de (2015) High order regularization of Dirac-delta sources in two space dimensions.

Vries, W. de (2015) Development of a fuel balance application.

Vu, L.D.K. (2015) Optimization measurement campaign.

Wedzinga, N.A. (2015) Design and testing of a 6 inch control Valve with a Multi-stage Anti-cavitation trim.

Westenberg, A.J.C. (2015) Internship Report – University California Davis.

Wilmink, D.G. (2015) Theoretical and experimental investigations into magnetic levitation systems.

Zande, M.R. van de (2015) Back contact modules in PhotoVoltaic Thermal (PVT) applications.

2014

Aalst, J. van (2014) Setting up a TPM based maintenance plan for VDL-ETG Suzhou in order to improve the machine quality and reduce downtime of the machine park.

Adhikari, S. (2014) Internship Report on benchmarking of Python based turbine model of cost of energy model; and generation of load coefficients to be used in the turbine model.

Alblas, Nander (2014) Measurements on cortical human, cortical bovine and simulated cortical bone.

Bairaktaris, D. (2014) Project feasibility of wood fired CHP.

Bosscher, H.H. (2014) Theoretical and practical approach to improve the film flow of the flywheel experiment.

Bouwman, M.M. (2014) Testing polymer-metal hybrid automobile components at Daimler AG.

Brinck, T.W.A. ten (2014) Accenture innovation Awards 2013 : Internship report Thijs ten Brinck.

Broersma, M. (2014) Heyson Wall Correction Code for the DNW LLF.

Consten, N. (2014) Nanoindentation of Hard Coatings.

Dagioglou, S. (2014) Development of a controller implementing the energy-planning phase of Triana using the Flexible Power Application Infrastructure.

Dagioglou, S. (2014) An implementation of the planning phase of Triana using the flexible power application infrastructure.

Deunk, F.H.J. (2014) The Swiss and Dutch Precision Industries.

Dijk, R.M. van (2014) Parameterstudy on a computational method for the prediction of noise production caused by sheet cavitation on a ship propeller.

Donderwinkel, T.G. (2014) Internship report.

Drenth, Bastiaan (2014) Effects of ice accretion on an ATR-72 wing.

Duin, E. van (2014) Validation of a measurement system used for quality control of one-way reflective targets.

Eshuis, S.G. (2014) The jumpmeter.

Fierkens, R.I.K. (2014) Mirror system for hand orthoses.

Gijsman, F. (2014) Tonal generation by an airfoil at low to moderate Reynolds numbers.

Gooijer, B.M. de (2014) Project FIX-IT Falkenberg.

Groenhuis, Vincent (2014) Improving Accuracy and Efficiency in MRI-navigated Breast Biopsy.

Groot, W.L.C. (2014) Specimen design for characterisation of failure in cast aluminium.

Hanselman, S.J. (2014) An investigation into the formability of advanced high strength steels in roll forming.

Hart, Koen 't (2014) Visualization and analysis of vortex propagation from a jet pump.

Haspels, M. (2014) Testing a technique to generate low-frequency large-scale turbulence with the Wall of Wind : an experimental study.

Herbrink, J.M. (2014) Instandhoudinsprogramma Walrusklasse.

Hoek, L.S. (2014) Replacement of glued on components on wind turbine blades.

Kamphuis, L.R. (2014) Active feedback acoustic noise control.

Kok, K.R. (2014) The design of falling film evaporators.

Kooiman, A. (2014) An analysis of some aerodynamic effects in Horizontal Axis Wind Turbines.

Käo, S. (2014) Designing, Building and Testing a Wave Energy Converter with Control System.

Maas, B.J. (2014) Numerically solving the sound transmission in the intake of a turbofan engine with non-axisymmetric lining.

Meutstege, Esken (2014) Micro-valve with in-plane fluidics using surface channel technology on SOI wafer for use with micro-Coriolis sensor.

Mimikos, N. (2014) Fast pyrolysis product distribution for residual biomass streams.

Mourits, G.J. (2014) BEM theory and CFD for wind turbine aerodynamics.

Nijenhuis, N. (2014) Ontwerp een freesrobot.

Pegels, K.J.R. (2014) Solar energy in Indonesia : an internship report on solar water heaters and sustainable energy technologies in the area of Bandung.

Porte, E.M. (2014) An experimental investigation into the behaviour of bidisperse granular avalanches.

Reiling, Mark (2014) Implementation of a Monocular Structured Light Vision System for Pipe Inspection Robot PIRATE.

Reimert, A.T.L. (2014) Reduction of support structures.

Rinsma, S.G. (2014) Design of a Reusable Teleoperation Control Architecture Applied to the youBot.

Roozing, W. (2014) Control strategy for variable gait using variable knee stiffness in a bipedal robot model.

Rozeman, S. (2014) CFD study on performance of a D.B.D. Plasma Actuated airfoil in an ultra-low Reynolds number flow.

Sanders, M.P.J. (2014) The Boundary layer over a flat plate.

Schipper, E. (2014) Integration of a vision system with a MOTOMAN HP3 robot system at the Universidad Autónoma de San Luis Potosí.

Schreuder, N.W. (2014) Maximizing flexibility through minimizing changeover time.

Stroeken, K.L.J. (2014) Floor vibration isolation of a coriolis mass-flow meter using filtering techniques.

Teunis, G.E. (2014) Analysis of a generic lifting table.

Timmer, M.A.G. (2014) Modelling framework for a low-grade heat thermofluidic oscillator : the Evaporative Reciprocating Piston Engine.

Vaseur, C.S.E. (2014) Robird wind tunnel test setup design.

Vidya, M. C. (2014) Oscillatory Flow in Jet Pumps: Setup Design and Experiments.

Wanders, I. (2014) Design and analysis of an optimal hopper for use in resonance-based locomotion.

Westerik, P.J. (2014) MEMS acoustic sensors inspired by the locust ear.

Wolters, Joris (2014) Design and constructioin of a setup that represents the behavior of a helicopter rotor blade system.

2013

Alveringh, D. (2013) A Large Range Multi-Axis Capacitive Force/Torque Sensor Realized in a Single SOI Wafer.

Baan, H.J.M. (2013) Designing a mannequin for aerodynamic bike testing.

Bekius, H.M. (2013) Research in flammability limits and deflagration to detonation transition of ethanol.

Beld, E.J. (2013) Droplet impingement and film layer modeling as a basis for aircraft icing simulations in openfoam.

Berg, Diederick van den (2013) Improving service part allocation at Liander’s multi-echelon structure.

Boekeloo, A. (2013) Let the water run : design and implementation of a micro hydropower project in Tumianuma, Chirusco valley, Ecuador.

Bosscha, A.J. (2013) A study in beamforming and DAMAS deconvolution.

Bus, M.S. (2013) Review of the impact of hydrogen addition to natural gas on gas turbine combustion.

Campmans, G.H.P (2013) Validating dense-gas models recently added to the Computational Fluid Dynamics code Eilmer3 at University of Queensland.

Damen, R.G. (2013) Evaluation report LECO Energy Management System.

Dekker, M. (2013) Body Weight Support System for LOPES2.

Euving, E.J. (2013) Researching the effects of time-delay on admittance control.

Golüke, T. (2013) The influence of remanence and flux trapping on the magnetic shielding properties of mu-metals and superconductors.

Hengstum, Q.T. van (2013) Implementation of a BIPV plant at Centro de Tecnologia Informação Renato Archer.

Huttenhuis, J.A.J. (2013) Stageverslag Masévon.

Klijnsma, T. (2013) Preventing line congestion at Aebi Schmidt Nederland.

Knepper, K.M. (2013) Numerical predictions of acoustic performance of folded cavity liners for turbofan engine intakes.

Kolk, H. (2013) Characterization, modeling and control of magnetic microrobots.

Kroes, R.F. (2013) Crude oil-water flow in horizontal pipes.

Kuin, R.W.J. (2013) Aerodynamic analysis for control and simulation of unmanned aerial vehicles.

Lubbers, Lieke (2013) Operational data quality : A case study about the quality of net purchase prices in the catalog of bol.com.

Meer, T.J. van der (2013) Implementation of acoustic boundary element method for the purpose of beamforming.

Melis, Peter (2013) Change requires insight - Assessing upstream scope 3 emissions by SMEs in the contruction industry.

Nijenhuis, M. (2013) Measuring pilot-affected safety of flight.

Oldeboer, A.J. (2013) Analyse van de centrale airco-installatie op de Universiteit van de Nederlandse Antillen.

Olimulder, R. (2013) The boundary layer of a fluid stream over a flat plate.

Poel, B. van der (2013) Time-domain impedance boundary conditions in computational fluid dynamics for use in thermoacoustic modeling.

Puttkammer, P.P. (2013) Boundary layer over a flat plate.

Rietema, M.J. (2013) Design of a solar sand printer.

Roos, L.W.M (2013) Comparison of local methods to detect vorticity in RANS simulations of the flow in the wake of a marine propeller.

Sikkens, B.N.A. (2013) An analysis of Coriolis mass flow chips with a bypass.

2012

Al, Martijn (2012) Design of a pretreatment installation for the washing of empty fruit bunches at a palm oil mill.

Attema, D. (2012) Stageverslag Huisman Equipment B.V.

Bakker, H.M. (2012) Improving software assistance for design engineers by integrating mathematical and function modeling.

Beijen, Michiel (2012) Item availability restricted.

Beijer, T.A. (2012) Design of a supplier performance measurement & evaluation system for DSM’s Petrochemical & Energy Group.

Benthem, W. (2012) Analyse en ontwikkeling van een 2,5 DOF manipulator.

Bergsma, Friso (2012) Effects of rig tension on sailing yacht performance : internship report.

Bijl, Sander (2012) Constructing models for a pebble heater and drying wood : internship report.

Boer, R. de (2012) Ontwerp van concepten en testopstellingen : stageverslag.

Boer, Tjalling de (2012) Aansluiting in ontwikkeling : eindrapportage.

Bosman, Merijn (2012) The potential of cohort analysis for vintage analysis. An exploration.

Bosman, R. (2012) Torque in a spiral conveyor : calculation model in Excel.

Bruggink, Mart (2012) Stageverslag.

Eilders, Leon (2012) Power curve uncertainty analysis.

Engels, R.A. (2012) Internship on indirect measurement of track decay rate and combined roughness.

Gelderblom, G. (2012) Head on collision of a vortex ring and a heated wall.

Giesbers, Jochem (2012) Contact mechanics in MSC Adams - A technical evaluation of the contact models in multibody dynamics software MSC Adams.

Gorter, Douwe (2012) Optimization of RFID tracking system and other warehouse processes.

Grift, E.J. (2012) Predicting scattering of acoustic modes in an annular duct subject to non-uniform flow: an analytical and numerical approach.

Gudde, J. (2012) Manure digestate combustion for decentralized energy production : research about the feasibility of the manure digestate combustion processing route.

Gunnink, K.J. (2012) Design of bagmaking equipment.

Hagen, J.A. (2012) Implementation of a target time calculation module at VDL ETG Suzhou.

Heutinck, L. (2012) Rekenmodel ten behoeve van nokmechanismen.

Hoorn, H-J. van den (2012) Internship report: report of a three month internship at the Centre for Design at the RMIT University in Melbourne, as part of the master program mechanical engineering (15 EC).

Hul, J.F. van 't (2012) Internship report PEER Africa.

Keurhorst, A. (2012) LNG projects for mechanical engineering: guidelines for internal use.

Klijnstra, F. (2012) Control and implementation of a transfemoral prosthesis for walking at different speeds.

Kuipers, N.J.A. (2012) Carbon footprint TS5 post cage.

Lamers, A.J. (2012) Design of a statistically balanced fully complaint grasper using the rigid body replacement method.

Ligtenbelt, Emma (2012) Item availability restricted.

Lommers, Sander G. (2012) Van passend zitsysteem naar passend informatiesysteem.

Norde, E. (2012) Effect of steady flow distortion on modes propagating in a turbofan intake duct.

Offringa, Wietse (2012) Thermo-hydraulic joint model with typical pf joint parameters as exemplary input (TeST-Joint).

Oomen, Matthijs A. (2012) Interaction between gloves and ball surfaces in afl and rugby.

Pilagkas, Christos (2012) Activity classification using a hip worn inertial sensor.

Platenkamp, Niels (2012) Item availability restricted.

Pocorni, J.K. (2012) Penetration depth control using an optical spectroscopic sensor in ND:Yag laser welding.

Prosjkin, Slavik (2012) Stageverslag: Ter land, ter zee en in de lucht.

Ramnath, Suraj (2012) Verbeteringen voor de planningsmodule in Axapta van Rotor.

Roethof, Thijs (2012) Assistance to Technical Department South East Asia.

Roosjen, Sander (2012) Internship report Cambodia : an evaluation of working 7 months for a solar energy company in a 3rd world developing country.

Schuerink, G.A. (2012) Bundled reports : Automated lubrication system for machining centres : Effect of nozzle accuracy and fluid amount on lubrication properties : Conceptual solution to large swarf build-up in miling of large rings.

Slomp, M. (2012) Deformation of multi-layer printed circuit boards - Usage of the classical lamination theory for modelling PCB deformation.

Smit, Maarten Jan (2012) Thermal control and rate of deposition system of chemical vapor deposition at atmospheric pressure : production of thin tin-oxide films by an APCVD process.

Straathof, N.M. (2012) Incident photon-to-current efficiency measurement system.

Strijdveen, G.W.J. (2012) Improving the efficiency of a Stirling Engine by changing the external fins on the hot side of the engine.

Teshome, M.M. (2012) Modelling and analysis of reliability and long run availability of a fleet of rolling stock.

Tran, Trung Quoc (2012) Possibilities for improving assessment tools of dikes safety.

Velde, R.J. van der (2012) Fatigue analysis on a chain-link of a continuously variable transmission.

Vendrig, W.H.P. (2012) Internship Report Heerema Marine Contractors Leiden.

Visser, J. (2012) Modellering van het effect van een Friction Modifier op booggeluid.

Voerman, M. (2012) Research into the effect of counter-rotating propellers, for the propulsion of a vertical take-off and landing ducted fan UAV, on the flow pattern.

Voortwis, Ate te (2012) High performance data analysis for micro-maqcro transition in large-scale DEM simulations.

Weerd, Lianne van der (2012) Wave-driven dynamics of Shoreward propagating acretionary waves in the nearshore.

Wilmink, J.H. (2012) Item availability restricted.

Ziggers, J. (2012) The design and testing of a unique prosthetic attachment at the University of Adelaide.

Zwijnenberg, Jurjen (2012) Securyfence : De ontwikkeling van een zetbank voor de productie van et Securyfence hekwerk.

2011

Achterberg, Wouter (2011) Stageverslag Ergo-design.

Bakhtiary, Amir (2011) Defect detection and evaluation of laminates.

Bakker, H.M. (2011) Integrating TRIZ function modeling in CAD software.

Beekhuis, Houdijn (2011) Internship Report Atesos Medical AG.

Belter, Daniel Sebastian (2011) Implementation-oriented recommendations with respect to dynamic waste collection.

Binnerts, B. (2011) Signal processing in experimental room acoustics.

Bootsma, Klaas (2011) Item availability restricted.

Bouten, T.W.F.M. (2011) Item availability restricted.

Boveldt, Arend te (2011) Internship at Nakilat Damen Shipyards.

Braak, P. ter (2011) Item availability restricted.

Bruinja, M.F.C. (2011) Item availability restricted.

Budding, Alex (2011) Item availability restricted.

Derese, Getachew M. (2011) Design of Plywood biogas digester.

Duivenvoorden, Aard (2011) Item availability restricted.

Eller, Tom (2011) Optimization of bag forming machine c20.

Gun, Daan van der (2011) Item availability restricted.

Haar, MF.A. (2011) Aero-engine emission and altitude relight test : placement at Rolls Royce Plc-Combustion and Casings, United Kingdom.

Hagen, Jeffrey (2011) Hydrogen Recovery from UCG Gas: experimental data of hydrogen separation from UCG gas using a polymer membrane.

Hutten, J.W.H. (2011) Item availability restricted.

Jansen, W. (2011) Design and implementation of a startup simulation program for direct fired boilers.

Kooistra, R.L. (2011) PLEGO : redesign of the PWR-Pack delta robot frame for increased modularity and better overall performance.

Liu, Xin (2011) Item availability restricted.

Moonen, Reinier (2011) External project : improving the overall equipment effectiveness of a line by an increased accessibility of product outfeed areas.

Moran, Javier (2011) Global cumulative installed photovoltaic capacity, solar home systems and mini-­‐grids.

Morren, Robin (2011) Item availability restricted.

Morsche, Niek te (2011) Report on the design study of a new semi-mounted reversible plough.

Mulder, Adrianus J. (2011) Decay functions in commodity freight flow models - A regression model for deriving the decay parameter.

Nastos, Vasileios (2011) Developing a realistic view on the availability of renewable resources for the road transport sector in the Netherlands in 2050.

Niskhi, Walelign Messele (2011) Item availability restricted.

Oosterhuis, J.P. (2011) Recuperation in a μCHP appliance.

Oude Luttikhuis, Bart (2011) Internship at Dr. Ing. H.C.F. Porsche AG.

Philippi, Antoon (2011) Increasing performance by enhancing hip stiffness.

Plegt, Teun (2011) Model based systems engineering in warehouse design : automatic report generation from SysML models.

Pocorni, Jetro K. (2011) Influence of airflow on weld depth obtained with fiber laser.

Rijkers, Haiko (2011) Rotating the mesh near the boundaries.

Rouwenhorst, Driek (2011) A numerical and experimental study on turbulent natural convection in a differentially heated cavity.

Ruiten, E.P.N. van (2011) Stageverslag Orange Plastics.

Rustamov, Bahram (2011) Internship report.

Schilder, J.P. (2011) Roller coaster dynamics and passenger comfort assessment : internship report.

Schiphorst, Frank (2011) Internship report : pressure sensor with integrated temperature function.

Siegersma, Jan (2011) Van Oord : afsluitend verslag van een stage bij Van Oord te Rotterdam en Kleipeda (Litouwen) in 2011.

Sligman, M. (2011) Stageverslag naar aanleiding van de volgende opdrachten: analyse bestaande breedstrooiende stalmestverspreider, ntwikkeling nieuwe verlengde achterklep en ontwikkeling nieuwe veiligheidsbumper voor de Deense markt.

Spanjer, S.A.J. (2011) Accuracy analysis of the 2200evo.

Straalen, Y.J. van (2011) Item availability restricted.

Swinkels, Koen (2011) Item availability restricted.

Trijselaar, Alex (2011) Item availability restricted.

Trinh, D.H. (2011) Vehicle parameter estimation using GNSS and standard ESC sensors.

Wachter, J.C. (2011) Thinking out of the hot box : a simulation study aimed at the increase of hot charging and average charging temperature at the hot strip mill of Tata Steel IJmuiden by using hot boxes.

Weitkamp, Sander (2011) Study on the flow of water at the bodywork = estudio sobre recorrido de agua en carroceria.

Wiggers, Jochem (2011) Item availability restricted.

Wijlens, J. (2011) Bemestingstechniek: stageverslag over de technische kant van mesttanks en bemesters.

Wittenberg, Wilco (2011) VarStiff: bending modulus : prediction models and experiments.

Woudstra, J.A. (2011) Economival potential for the implementation of photovoltaic solar systems in Chile.

Zeekant, Erwin (2011) Lagrangian coherent structures of accumulating inertial particles in vortex flow on a disk.

Özcan, Evren (2011) Theoretical modelling of Philips bubble pump behaviour.

2010

Cnossen, M.C. (2010) Ventilatiesystemen : stageverslag.

Coughlan, Darren (2010) HTHW temperature reduction.

Dijkstra, E.J. (2010) Upper limb project.

Ergül, Bayram (2010) Innovatie in palletising.

Faneker, Tom (2010) Item availability restricted.

Haas, Eddy de (2010) University of Louisville Hospital Emergency Department Simulation, how to improve patient satisfaction and increase ED's revenue.

Hilgerink, Tom (2010) Ontwikkeling van een energiezuinige warmtewisselaar.

Hove, Christiaan ten (2010) Item availability restricted.

Kesete, M.M. (2010) Electrode design : internship report.

Kevelam, J.H. (2010) Stageverslag Huisman Equipment BV.

Kickert, V.M. (2010) Energiek door energie; Duurzaamheid met apparatuur.

Klunder, W.J.A. (2010) Werking van lijnbranders.

Kooi, Freark van der (2010) Musculoskeletal analysis of light postural movements during sitting : a pilot study about the effect of light postural movements during sitting on the muscle activity in the back.

Kooper, Rachel (2010) Kiwo: een vernieuwende verpakking voor vers fruit.

Mastenbroek, Jan-Jaap (2010) Bluff body flow : wake behavior behind a heated circular cylindeer.

Melching, Marcel (2010) Invensys programmable home thermostat: designing a usable user interface.

Miedema, Rob Acronius (2010) Improve motion capturing by using a movie camera and new markers : report internship.

Minnema, A. (2010) Designing a low frequency sound source.

Oosterhuis, Joris (2010) Burner optimisation for a boiler with controlled combustion.

Oude Luttikhuis, Ellen (2010) Het interactieve zuivelschap.

Pander, Renate (2010) Praktikumsbericht zum Thema : analyse zweier Berechnungsmethoden zur Auswertung der Indizierung und Berechnung von Motorprozessen.

Ploeg, M. (2010) EMS- & Hospital-Cluster determination with Linear Programming.

Ridder, L. van de (2010) Lean Burn Improvements : Placement Rolls-Royce 2010.

Ruiter, Floris de (2010) Item availability restricted.

Stelma, T. (2010) Thermal modeling of the tape placement process.

Tiemessen, P.V. (2010) RAMS en snelwegsystemen: belangrijke invloedsfactoren en mogelijke maatregelen : een onderzoek naar de belangrijkste invloedsfactoren op de RAMS prestatie van snelwegsystemen en mogelijke maatregelen om de RAMS prestatie van snelwegen te verbeteren.

Ubaydullaev, Bakhtiyor (2010) Feasability study for the university of Twente campus closed water cycle : feasibility study for use of sustainable energy from wastewater sludge and possibilities of wastewater sludge reuse.

Veldhuis, Mark (2010) Item availability restricted.

Verweij, A.P. (2010) An investigation in actuator disc CFD solution applicabillity for aeroacoustic analysis of propellers and rotors.

Weersink, Ruud (2010) Experimental study of the oscillatory interaction between two free opposed turbulent round jets.

Widjanarko, Stephanus M.D. (2010) Internship Vestas Wind system A/S : steady blade element momentum code for wind turbine design validation tool.

2009

Bax, Michiel (2009) Let's recycle : designing the inbound logistics of catalysis.

Benjamins, Jeroen (2009) Waternish.

Diepen, Bart van (2009) Smart chair expert.

Helmond, Dennis van (2009) Segmentation of ABN AMRO private banking singapore customers : bachelor report.

Hoogstra, W.J. (2009) Scenario based user centered herontwerp van een interface in de bestuurdersinrichting van een ambulance.

Kemp, Laurens (2009) Een goede las is afhankelijk van een goede voorbereiding.

Lammers, R.K.H. (2009) E-health : de succesvolle pilot voorbij? : toepassing van business modelling op PAL4.

Plat, M.A. (2009) Designing a boiler start up program.

Schippper, Menno (2009) Turbulentie in accountancy : over de recente ontwikkeling in de Nederlandse accountancy sector.

Wiebenga, J.H. (2009) Improve the predictability of crashworthiness simulations with respect to head-impact onto the Volkswagen Polo Dashboard.

2008

Peters, Joost (2008) Performance measurement for All IP : developing a performance measurement instrument for a local roll out project of the All IP Network.

Ravenhorst, J.H. van (2008) A rapid prototyping system for the Hot-Wire cutting process.

Zeeburg, T. van (2008) Het gebruik van procescriteria door gemeenten : een onderzoek naar de barrières en de best practices die Nederlandse gemeenten ondervinden bij het operationaliseren van proceskwaliteit.

2007

Quak, Wouter (2007) A solid-shell element for use in sheet deformation processes and the EAS method.

Wijlen, E.V. ter (2007) Optimisation of a deep drawing process with experimental validation: Applied to an automotive deep drawing process of a B-pillar.

2006

Grouve, W.J.B. (2006) Detection of delaminations based on dynamic behavior : application of fibre bragg gratings for dynamic damage detection.

Jonkers, B. (2006) Simulation of the Robot Roller Hemming process.

Veldman, Else (2006) Using optimisation techniques to solve a production problem, with application to the deep drawing process of an automotive part.

2005

Entzinger, J.O. (2005) A flexible seam detection technique for robotic laser welding.

Riel, M. van (2005) Determination of the transverse stress in a combined tensileshear test.

2004

Kommelt, P. (2004) Optimisation of the Initial Tube Geometry for Tube Hydroforming : a mathematical approach.

2003

Lingbeek, R.A. (2003) Aspects of a design tool for springback compensation.

2002

Haaren, L. van (2002) Deformation of aluminium sheet at elevated temperatures : experiments and modelling.

1991

Visser, F.C. (1991) Two-dimensional potential flow through a centrifugal impeller.

This list was generated on Thu Mar 28 06:04:14 2024 CET.