University of Twente Student Theses

Essay

Aalten, Thijs van (2021) Online optimization of EMG using a hybrid model approach.

Abdelaziz, Mohamed Essam Mohamed Kassem (2016) Designing, implementing and integrating a controller for the MRI compatible robotic breast biopsy system.

Abhinaya, Antoinette (2021) Using Machine Learning to detect voids in an underground pipeline using in-pipe Ground Penetrating Radar.

Akbari, Maryam (2020) Expediency of ATO in heavy rail : a decision-making framework.

Akker, B.P.H. van den (2018) Durability of co-bonded stiffened CFRP panels subjected to post-buckling fatigue.

Al Kathemi, M. (2022) Roadmapping in the circular economy: achieving circular inflow and outflow according to the CTI framework.

Alan, G.A.S. (2016) Parameter study of a staggered pin-fin heat exchanger using openfoam.

Alblas, Nander (2014) Measurements on cortical human, cortical bovine and simulated cortical bone.

Altena, Thijs (2017) Better to prevent than regret : gain insight in how to measure the performance of Bolletje's Technical Department to create a preventive maintenance plan.

Alveringh, D. (2013) A Large Range Multi-Axis Capacitive Force/Torque Sensor Realized in a Single SOI Wafer.

Ambrosius, J.I. (2021) The effect of perturbing the angular momentum during walking on the balance strategy.

Andersons, J.A. (2023) Exploring the benefits and limitations of multi-axis 3D printing for improved part quality and reduced waste.

Arendshorst, M.G. (2019) Validating the effect of vertically staggered wind turbines in the entrance region of extended windfarms.

Arendshorst, M.G. (2021) Micro-pump optimization for applications in CubeSats.

Ariës, R.C.G. (2021) Exploratory research of friction stir extrusion additive manufacturing using AA6060 T6.

As, D.M.M. van (2022) A novel electromagnetic guided medical device to improve outcomes of the septal myectomy.

Attema, Klaas-Jan (2019) Exergames: Portable and Enjoyable.

Bakker, H.M. (2012) Improving software assistance for design engineers by integrating mathematical and function modeling.

Balistreri, G. (2015) Potential of Additive Manufacturing in the after-sales service supply chains of ground based military systems.

Barbero, Marta (2018) Reinforcement learning for robot navigation in constrained environments.

Basu, Akash (2021) Biomechanics in the Wild : a step towards validation of a wearable system for human movement analysis.

Bax, Michiel (2009) Let's recycle : designing the inbound logistics of catalysis.

Beekman, J.L. (2016) Experimental investigations of a magnetic levitation system and the comparison with simulations.

Beelen, S.J. (2018) Lagrangian Trajectories Method with Bubble Dynamics for Cavitation Inception Predictions.

Beijen, Michiel (2012) Item availability restricted.

Beijer, T.A. (2012) Design of a supplier performance measurement & evaluation system for DSM’s Petrochemical & Energy Group.

Beijersbergen van Henegouwen, D.G. (2024) Design of a 3D printed device for monosize microbubble production on a chip.

Belshof, Koen (2023) A motion planning implementation and simulation for the Flux One.

Belt, M. van den (2017) Using modal derivatives to determine the behaviour of mode shapes and natural frequencies during large deflections.

Belter, Daniel Sebastian (2011) Implementation-oriented recommendations with respect to dynamic waste collection.

Berg, Diederick van den (2013) Improving service part allocation at Liander’s multi-echelon structure.

Berg, Maarten van den (2022) Optimisation of the pultrusion process for carbon fibre reinforced polyurethane spar caps.

Berg, Rutger van den (2021) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Berghuis, D.P.J. (2016) LEAN manufacturing in de elektro assemblage.

Bertelink, S.H. (2023) 3D-printed monolithic oviduct-on-chip device.

Bessembinder, J.J.F. (2020) Development tpn module and user interface for the easycompounder.

Bessembinder, J.J.F. (2023) Development of an air-source, cascade heat pump, water boiler.

Beugels, F (2018) Non-destructive testing of solid propellant rocket motors.

Beunk, L.D.R. (2019) Tangible Tools and Techniques: Co-designing with Locked-In Syndrome.

Bhide, Gaurav (2020) Evaluation of the SUNRAM 5 for performing a full clinical in-situ breast biopsy procedure.

Bianchi, Filippo (2018) Friction stir welding of aluminium-lithium alloy for next generation European launcher. Feasibility study on redesign, analysis and implementation on Ariane 6 first stage (VUAB).

Blaauw, J.B. (2020) Structural dynamics simulation of a swinging fairground attraction using a novel implementation of reduced order modeling.

Blaauw, Jurjen (2019) Design of new test setups for characterization experiments of adhesives.

Bluiminck, M. (2022) Modelling and control of underactuated finger-based gripper with adjustable compliance for grasping of varying and deformable objects.

Blöte, Stefan (2024) Controller Design for an MR-Safe Vane Motor.

Boer, C.A.G. de and Meijden, D. van der and Versluis, W.D. (2017) Item availability restricted.

Boer, Tjalling de (2012) Aansluiting in ontwikkeling : eindrapportage.

Boers, Tim (2017) Personalized endovascular stent grafts : Re-inventing the personalized stent graft and its production process; a finite element analysis.

Boersma, P. (2023) Experimental validation and numerical modelling of train-bridge dynamics.

Boggelen, C. van (2020) Removal of volatile organic compounds and other odourous compounds using ozone generated by UV-C light in aerobic digestion installations.

Bogt, J.H.W. ter (2021) The influence of consolidation on bending behaviour of molten unidirectional fiber reinforced thermoplastic tapes.

Boiten, D.A. (2020) The development of a non-migrating knee orthosis.

Bokhove, T. (2016) Improving the model management workflow.

Bolding, F.K.H. (2021) The effect of fatigue on leg- and joint stiffness during running.

Boogert, J.L. (2021) Mechanical fixation of a novel finger implant (APRICOT) for patients with early-stage osteoarthritis in the MCP joint of the thumb.

Boom, R. (2017) Structural Health monitoring for landing gears.

Boonstra, Sander (2019) In vivo measurements of human tongue elasticity using a volume-based aspiration method : towards a personalized biomechanical tongue model.

Boro, Asutosh (2020) Theoretical and numerical modelling of sorption compressor system in a heat pump.

Bos, Jochem (2023) Item availability restricted.

Bos, M.C. (2021) On pulsation in external gear pumps: CFD analysis and experimental investigation of pulsation in external gear pumps.

Bos, W. (2021) Design and implementation of a coaxial laser triangulation sensor in a laser metal deposition set-up.

Bosman, F. (2023) Hardware for DIY at home lab for telemanipulation control.

Bosman, Merijn (2012) The potential of cohort analysis for vintage analysis. An exploration.

Boulogne, M.C. (2022) Designing the tapering of a radially oriented flexure joint.

Bouma, L.J. (2023) Atmospheric sound propagation modeling with the Harmonoise model applied to wind turbine noise.

Braakman, L. (2019) Assessing life cycle costs over increasing building circularity levels.

Braks, R.J.M. (2023) Motion control of IRONSperm clusters in a vascular model.

Brantjes, R.J. (2020) Analysis of a 3D printed whisker-inspired tactile sensor.

Brantjes, R.J. (2024) Aerodynamic interferences for the OmniMorph aerial vehicle.

Brink, A.P. van den (2022) Recharge yourself An autonomous drone charging solution.

Brink, E.W. van den (2022) Design of an adjustable torque device for XS-TOR implant.

Broeke, D.A. van den (2023) Particle detection and tracking in avalanches.

Brugman, Aniek (2023) Evaluation of the Reboocon Intuy knee.

Bruinsma, S.J. (2018) Development of a diagnostic tool based on Continuous Scanning LDV output spectra.

Budding, D.J. (2020) Techno-economic study of a power-to-hydrogen system in offshore wind energy.

Budiman, A.H.S. (2016) Modeling of magnetocaloric refrigeration with packed bed regenerator.

Buitenhuis, Kilian F. (2022) Optimising the OPCAB simulator movement mechanism.

Buiteveld, J. (2021) Techno-economic evaluation of a novel biomass pyrogasification process with an integrated sorption-shift system : a process for the conversion of waste to high-quality biochar and hydrogen with carbon capture and hydrogen upgrading.

Bukai, E. (2016) Design of a novel needle steering manipulator for minimally invasive guided breast biopsy.

Bullee, P.A. (2015) Development of an ice accretion code suitable for mixed-phase icing conditions.

Busink, K. (2021) 2D PIV experiments of oscillatory flow in a stenosis : a study into the physics of flow of cerebrospinal fluid.

Busker, B. (2016) Task specific information visualizations using head-mounted display technology.

Buter, E.M. (2022) Design a novel device to locate and secure a metacarpophalengeal implant within the joint capsule.

Carmona Ortiz, Víctor Antonio (2022) Modelling of Robotic Hands: Kinematic and Dynamic Parameter Identification.

Chengappa, Rakshith Mukkatira (2019) Innovative sunlight driven thermal storage slurry for direct absorption solar collectors (DASC).

Choo, Jun Hong (2019) Impactor design and development for in-pipe sewer inspection robot.

Chrysanthou, M. (2020) The effect of a novel orthosis on ankle kinematics in simulated sprain.

Chua, EuChieh (2021) Management of safety hazards in residential buildings with multiple electrical energy storage systems.

Coco Martin, F.S. (2024) Characterization of IRONSperm clusters : the effect of frequency actuation, concentration, shape and composition.

Coulibaly, A.A. (2023) Test method for measuring electrical resistivity of UD CFRP materials with off-axis fibre orientations : A study towards a better understanding of the electrical behaviour within the complex fibre network of UD CFRP’s.

Dafedar, Sajeed (2020) Develop and improve modelling capabilities of reactor vessel internals using ansys.

Dagioglou, S. (2014) An implementation of the planning phase of Triana using the flexible power application infrastructure.

Dasselaar, R.J. van (2019) Experimental and structural load assessment in wind turbine drive trains.

Den, Michael ten (2017) Design of a pneumatic Dual-Drive Planetary actuator to improve the velocity of MR guided manipulators.

Deo, P.V. (2021) Item availability restricted.

Derese, Getachew M. (2011) Design of Plywood biogas digester.

Desai, Amit (2018) Threaded plug & ring-assembly station design.

Deunk, F.H.J. (2015) Additive manufacturing with friction surface cladding.

Dhau, Khansa Irsalina (2020) Optimal Integration Strategies for a Green Tiny House Energy System.

Dickhof, Iljar (2023) Wind tunnel measurements of a small scale wind turbine.

Diepen, Bart van (2009) Smart chair expert.

Diepen, T. van (2016) Categorizing and prioritizing lifetime impacts for Asset Lifecycle Plans.

Ding, Daniël (2024) Upscaling Production of Monodisperse Microcapsules for Injectables by In-Air Microfluidics.

Doets, M. (2022) Mechanically activated in-vitro muscle model.

Dokter, Jorn (2024) Thermal Degradation of Grease.

Domingo Gil, Francisco José (2023) Comparison of force and image-based controller for autonomous ultrasound robotic acquisition during varying tissue stiffnesses.

Doshi, Ajinkya Ajaykumar (2021) 3D printed interaction force sensors for robotic fingers.

Dragman, T.C. (2019) Identifying Dynamic Nonlinearities due to Damage Precursors in Flexible Structures.

Dransfeld, MSc. F.J.M. (2023) 3D Ankle Force and Moment In Ankle Fracture Patients Walking With Instrumented Crutches.

Drenth, Bastiaan (2014) Effects of ice accretion on an ATR-72 wing.

Duinmeijer, W.C. (2022) Method for manufacturing a hemofiltration fibre mat for use in a combined lung-kidney assist device.

Dzulqarnain, A.R. (2017) Distributed Processing for Operational Modal Analysis of Bridge Infrastructures Using Wireless Sensor Networks.

Ekris, B.W. van (2022) Identifying dynamic critical components of a gantry based lasercutting machine using a validated FE model.

Elderhorst, Tim R. (2021) Designing a Virtual Reality headset for amblyopic children.

Eldesouky, Mohamed Ibrahim (2023) Enhancing Variants Management at Thales Hengelo.

Elst, Daniëlle van (2023) Development of a 3D stress foot plate meeting the medical device regulation and affordability - Product development without a business case.

Engelen, F.H.A. (2024) Material preparation, design and production of an actuated 3D printed magnetic part.

Entzinger, J.O. (2005) A flexible seam detection technique for robotic laser welding.

Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.

Euving, E.J. (2013) Researching the effects of time-delay on admittance control.

Euving, E.J. (2017) Developing an energy observer for energy bookkeeping.

Euving, S. (2016) Turboprop engine - Compressor test RIG.

Euving, Stephan (2017) Fluid flow in the cement layer of Mono-Diameter wells during casing expansion.

Eversmann, H.Y.N. (2022) Whole Life Carbon Thinking : market and data analysis of whole life carbon in Dutch renovation projects.

Farkas, Marton (2023) Reliable specific heat capacity measurements of thermoplastic composites with differential scanning calorimetry.

Feldbrugge, B.A.J. (2024) Tendon routing optimisation of a tendon-driven gripper to reduce frictional effects.

Feldbrugge, Berend (2016) Development of an optimisation process for pre-swirl stator designs.

Fernhout, M.M. (2023) A Deep Learning Approach for Assessing Micrographs of Fibre Reinforced Composite Laminates.

Fix, J.A. (2023) A Linearized Parameter Study Of A Friction Isolator System : Towards A Frequency Domain Design Guideline.

Fokkens, Dirk-Jan (2015) A practical approach to maintenance performance measurement: shifting the focus from the alignment with strategic objectives to the managerial possibilities to iprove maintenance effectiveness and efficiency.

Forkink, L. J. (2022) Condition Based Maintenance : Improving the RAMS performance of movable bridges - A case study.

Frielinck, R. (2023) Learning Factory Configuration Tool: An Approach for Preserving the Value of Educational Learning Factories.

Froner Back, Lucas (2020) LES Analysis of coherence in a turbulent shear layer of an open jet wind tunnel.

Gabriël, Gaston Ramon (2023) The implementation of the 3CC muscle fatigue model into CEINMS.

Gajadin, R.D. (2017) Dry Gas Seal Reliability and the Development of Prognostic Models.

Galen, D.J.M. van (2023) ECMO Mobilizing Device.

Ganea, B.M. (2021) Design and implementation of a nonlinear model predictive controller for preliminary aerial physical interaction applications.

Gebbeken, J. (2023) Modelling of Fluid Flow and Mass Transfer in a Hollow-Fibre Membrane Oxygenator.

Geurts, Peter (2017) Development of a vane motor servo system for precision positioning in an MRI- or CT-environment.

Ghantasala, Udaya (2021) Rain erosion performance of the material to be used as the leading edge protection of the wind turbine blades.

Gies, S.H. (2017) Ornithopter flight dynamics : measurement and analysis of the Robird's Flapping Wing.

Giesbers, Jochem (2012) Contact mechanics in MSC Adams - A technical evaluation of the contact models in multibody dynamics software MSC Adams.

Gifari, Muhammad Wildan (2018) Study on the Design of Soft Surgical Robots for Endoscopic NOTES Application.

Giorgio, Thomas (2019) A methodology on analyzing pressurized lip seal geometry under misalignment through glass.

Golüke, T. (2013) The influence of remanence and flux trapping on the magnetic shielding properties of mu-metals and superconductors.

Gooijer, B.M. de (2015) Model predictive control of forming processes.

Goudsblom, T.G.J. (2023) Uncertainty Thinking - Embracing uncertainty in product development.

Gouw, R.H. van der (2017) Development of a tyre monitoring system.

Grafen, LN (2020) On the applicability of the mandrel peel test to characterize the fracture toughness of non-symmetric interfaces.

Graziosi, Damiano (2018) Toward spatial impedance estimation for robotic systems.

Greef, D. de (2024) Design improvement for a pneumatic soft inflatable actuator.

Grinten, B.A. van der (2015) Port based Hamiltonian modelling of flapping wing aeroelasticity using vacuum chamber and wind tunnel measurements.

Groenhuis, Vincent (2014) Improving Accuracy and Efficiency in MRI-navigated Breast Biopsy.

Groot, D.J.A. de (2020) Conceptual design of a microfluidic-based platform for medical diagnosis.

Groote, Jasper de (2023) Predicting data center behaviour with transfer learning.

Grootkarzijn, R. (2023) Adaptive Feedforward Control for Active Vibration Isolation Systems with Motion Stage and Nonlinear Dynamics.

Grouve, W.J.B. (2006) Detection of delaminations based on dynamic behavior : application of fibre bragg gratings for dynamic damage detection.

Gun, Daan van der (2011) Item availability restricted.

Haan, R.J (2019) Increasing the arc-on time for the welding robots at ASN Holten.

Haar, W. van der (2016) Assessing the appropriateness of additive manufacturing : Development of a knowledge based assessment methodology to determine appropriateness of additive manufacturing for an organisation.

Haaren, L. van (2002) Deformation of aluminium sheet at elevated temperatures : experiments and modelling.

Hagen, Jason ten (2023) Optimization of flexure mechanisms using gradient-based methods.

Haido, Jan (2023) A Methodology for Transitioning from Jig-Based to Jigless MIG Welding Utilizing Articulated Robots.

Hakvoort, M.H. (2023) Frequency Domain Optimization of the Tracking Performance of a Piezo Actuator Using Reset Control.

Hal, T.P.J. van (2023) Controller tuning for disturbance suppression in a piezo damped large stroke flexure hinge.

Hal, X.C. (2021) Identifying impact damage with the use of Piezoelectric transducers in a phased array.

Hannink, M.J.M. (2017) Heat exchanger shape optimization : using adjoint method ansys fluent.

Harish, Ashuthosh (2021) Estimation of the Frequency Response Function of a defective bearing from a measured uni-axial vibration signal.

Hart, Koen 't (2014) Visualization and analysis of vortex propagation from a jet pump.

Hartog, Wilmar den (2016) Heat transfer to sub- and supercritical water flowin a vertical tube at lowmass fluxes.

Hartogsveld, Lars (2021) Designing a leaf holder for real-time microscopy.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Haverkort, Arthur (2023) The influence of hybrid reinforcements on Long Fiber Thermoplastic composites. An experimental approach on the production process of (hybrid) LFT pellets and static/dynamic mechanical testing.

Heeg, Rogier (2023) Control of a system based on a 3D printed torque sensor.

Heeres, Roeland (2023) Creating an analytical model to predict the stiffness properties of a guidewire actuated bending tip.

Heidemann, Claudia (2018) Characterisation of a nano-g accelerometer.

Heineman, Paul (2023) Reviving Medieval Mechanisms: Design Study of Mechanical Escapements For Use in Space : What Parameters Influence Performance and How To Predict It.

Helmond, Dennis van (2009) Segmentation of ABN AMRO private banking singapore customers : bachelor report.

Hendriksen, J.A.A. (2023) Developments in 2 degree of freedom fine force delivery by an assistive ankle orthosis.

Hendrix, J.M. (2016) Impedimetric detection of cancer derived vesicles: combining smart sieves with nanogap capacitors.

Hepburn, Peter (2023) Guidelines to optimise the Ebike charging experience.

Herpen, N. van (2019) Measuring relative bone pose inside a bi-lateral ankle exoskeleton using A-mode ultrasound.

Heuvel, S. van den (2023) Hydrodynamic Forces Acting on Vertically Rising Bubbles.

Hijwegen, R. (2023) Driving Sustainability in Swiss Multi-Family Housing : A Comprehensive Carbon Footprint and Optimisation Analysis of a Sustainable Heating System.

Hilgerink, Tom (2010) Ontwikkeling van een energiezuinige warmtewisselaar.

Hilhorst, M.G.C. (2023) Construction of a simulation model to assist in production planning and control processes.

Hoek, Jan van der (2021) Computational modelling of flow in the liver vasculature using the Lattice Boltzmann method to study microsphere distribution.

Hoeksema, V.L. (2017) 3D Transient and crystallization model for laser assisted tape Winding.

Hoeksma, Mechteld (2023) Designing a locking mechanism for fixating a specific heating system in vacuum with high forces and a high temperature.

Hofman, Erwin (2023) 3D Printing and Warpage Compensation of Multi-Material and Composite Products.

Hofsteenge, J.W. (2021) Implementation and Validation of FGM in CFX for the Description of Turbulent Non-Adiabatic Premixed Combustion.

Hollaar, C.C.J. (2023) Modelling and improved design of a displacement converter for a thin sound source.

Hooft, D. 't (2018) Item availability restricted.

Hooghiemster, A. (2021) Additive Manufacturing of Inconel 718 for Aerospace Applications : Towards Process-Microstructure-Property relationships.

Hoogstra, W.J. (2009) Scenario based user centered herontwerp van een interface in de bestuurdersinrichting van een ambulance.

Hoorn, H.E. van den (2019) Analysis of Dynamic Loads induced by Spinning Gondolas on a Roller Coaster.

Hop, Michael (2021) Design of an innovative natural ice skating rink.

Hout, N.B. van den (2017) Developing a dedicated tool to support the development of domestic boilers for a circular economy.

Huizingh, M. (2021) Extensions and simulations of numerical model for picosecond laser-material interaction in bulk sapphire.

Iordache, C. (2017) Radial lip seal design parameters and simulations : influencing leak-rate parameters.

Iordache, C. (2017) Adjoint-based optimization study of a heat exchanger : single and multi-objective shape optimization.

Irfan, Tekinerdogan (2022) Online platform for supporting the development of assistive technology tools for disabled people.

Jager, J (2017) Joint level modelling, characterisation and torque control of the SHERPA robotic arm.

Janardhan, Gautam Geeta (2021) Simulation of rain droplet impact and erosion on leading edge protection of wind turbine blades.

Janbroers, J.M. (2019) Developing an MR safe calibration and interface module for pneumatic stepper motors.

Jansen, J. (2021) Control of soft robotic knee brace treating ACL lesion using iterative learning.

Jansen, J. (2023) Towards continuous material supply for friction screw extrusion and additive manufacturing.

Jansen, Jorn (2018) Endoscopic end effector control using soft actuator.

Jansen, R. (2023) Designing a Quality Plan to enhance Production Process Quality at VMI Group.

Jansen, S.L. (2022) Towards a parametric optimization tool for hydrofoil design.

Jilderda, Christiaan (2020) Fatique in tubular structures: developing design tools that assist in analysing and optimising tubular structures that are subject to fatique.

Jimenez, J.J. (2018) Design of an Electro-Hydrostatic Actuated Ankle-Foot Orthosis.

Johannink, T.A. (2016) Design of a decision making model to aid in the development of medical technology.

Jong, H.N. de (2022) Design for stiffness constrained by additive manufacturing design rules : case study for an electronics enclosure.

Jong, S. de (2020) Arduino toolkit for the control of pneumatically actuated wearables.

Jong, S.D.M de (2023) A physics-compatible dual field discretization using domain decomposition.

Jong, T.M. de (2023) Developing guidelines for embedding codes onto products produced using Selective Laser Sintering.

Jong, T.M. de (2023) Developing guidelines for embedding codes onto products produced using Selective Laser Sintering.

Jonkers, B. (2006) Simulation of the Robot Roller Hemming process.

Jonkers, H.R. (2019) Advanced internal combustion engine sensor analysis by means of modelling and real-time measurement.

Jonkers, H.R. (2022) 3D Printed Electronics.

Jurjens, R.R. (2021) Repair/replace decision for ultra-precision milling machine.

Kaal, Joris (2021) Enabling Chip Characterization & Providing Chip Information : Characterizing fluid flow in a microphysiological system using PIV-experiments, Lattice-Boltzmann and COMSOL Multiphysics simulations and creating a tool to provide this information to users with a scenario-based rapid-prototyping co-creation process.

Kaiser, Jesse (2019) Human lower limb gait analysis of walking on uneven terrain.

Kajim, A.C.C. (2023) Conceptual design of a thermoplastic composite cross-car beam.

Kalter, Louweris Rémon (2019) Characterisation of damage in composite materials using infrared thermography.

Kamp, P.J. (2016) Towards an Ultra Sensitive Seismic Accelerometer.

Kamphof, W.E. (2023) Design of a Flexible Hinge for an Atmospheric Dispersion Corrector.

Karuppannan, Sriganesh (2020) Analysis of various demand side management control mechanisms for a smart solar carpark.

Karuppusamy, Karthikeyan (2019) Development of physics of failure based prognostics feasibility tool for predictive maintenance.

Karytsas, Konstantinos (2023) Model-Free Reinforcement Learning Control of a Pneumatic-Driven Soft Continuum Robot.

Kelder, R. (2021) Active Vibration Isolation with an Active Stage.

Kemp, Laurens (2009) Een goede las is afhankelijk van een goede voorbereiding.

Kerk, J.J. van de (2022) A Semi-Analytical model for Mode I delamination prediction in bolted bonded composite joints.

Keurhorst, A. (2012) LNG projects for mechanical engineering: guidelines for internal use.

Kickert, V.M. (2010) Energiek door energie; Duurzaamheid met apparatuur.

Kim, Woong (2022) Design and Control of Efficient and Powerful Robot Joints.

Klein Rot, J.E. (2021) Evaluation of a Force Controlled Pneumatically Actuated Knee Orthosis.

Kleverwal, Koen (2023) Influence and implementation of static balance on a parallel leaf spring mechanism.

Klijnsma, T. (2013) Preventing line congestion at Aebi Schmidt Nederland.

Klijnstra, F. (2012) Control and implementation of a transfemoral prosthesis for walking at different speeds.

Klomp, E.J. (2021) Design of a flexible hollow hinge for a cryogenic environment.

Koers, Laurens (2019) Modelling of a ducted fan and its contribution to drag on a PAV hull.

Koets, Kelwin (2021) Design of an Innovative Siltation Removal System for Rolling Gates.

Kolk, H. (2013) Characterization, modeling and control of magnetic microrobots.

Kommelt, P. (2004) Optimisation of the Initial Tube Geometry for Tube Hydroforming : a mathematical approach.

Kooistra, E. (2021) Prediction and validation of galling behavior in hot sheet metal forming processes.

Kooper, Rachel (2010) Kiwo: een vernieuwende verpakking voor vers fruit.

Koopman, F.B. (2019) Improvement of longitudinal tracking and the addition of turning control of an underactuated moment exchange unicycle robot.

Kopinsky, Joël J. (2019) The design of an economic electric motorbike for urban commuting in the Netherlands : describing a design method that implements axiomatic design and is tailored to overcome the challenges of electrc motorbike design.

Korenblik, J. (2021) Minimal sensing approach of an underactuated flexure based gripper for agri-food applications.

Koster, B. (2020) Passive Mass Reduction in Admittance Control.

Kouwen, R.T.S. (2022) A novel methodology for robust projection-based alignment of automotive matrix-type LED headlights.

Krabben, I.G.W. (2020) Determination of the source term disturbing bounded flow performing practical Large Eddy Simulations.

Kruiff, K.T. de (2023) Concurrent haptic feedback for improving the body balance of front and back crawl swimming.

Kruize, Hendrik J. (2021) Improving Methanol Powered Solid Oxide Fuel Cell – Gas Turbine Power Units for Naval Support Vessels through Fuel and Heat Recovery.

LI, Yingying (2023) Reducing motion inaccuracies due to cogging in a redundantly actuated 3-DOF manipulator.

Laerhoven, B.J.A. van (2019) Modelling and characterisation of a pressure sensor implemented insurface channel technology.

Laerhoven, B.J.A. van (2021) Implementation of silicon nitride isolation trenches in SOI MEMS accelerometers.

Lagerweij, A.B. (2023) Development and production of a new prototype tire and rim for remote controlled model racing cars.

Lakshmi Narayan, P. (2022) Influence of industry 4.0 on manufacturing facility design process and outcomes of the facility layout.

Lamers, A.J. (2012) Design of a statistically balanced fully complaint grasper using the rigid body replacement method.

Lammers, R.K.H. (2009) E-health : de succesvolle pilot voorbij? : toepassing van business modelling op PAL4.

Lange, T. de (2023) Towards an Efficient Multigrid Algorithm for Solving Pressure-Robust Discontinuous Galerkin Formulations of the Stokes Problem.

Langen, I.N. van (2022) Development of patient-specific finite element models for the simulation of strain adaptive tibial bone remodeling after total knee replacement.

Lanjouw, Mirthe (2021) The road to preventive and predictive maintenance for the CombiPlast.

Lavaniya, Saurabh (2021) Design of low airflow sensor to measure airflow near plants leaf.

Leede, M de (2016) The analysis and redesign of a ship cradle.

Leede, M. de (2017) Solid state additive manufacturing : A study to understand the bonding process of friction surfacing using AA2024-T351 onto AA2024-T351.

Legters, D.F. (2023) Item availability restricted.

Leijen, Niels (2018) Low-cost silicon-based resistive load cell suitable for asymmetric loads.

Lenssen, J.A. (2019) Towards a steerable multi-module soft robotic endoscope for NOTES applications.

Lerink, C.W. (2020) Visualisation of fouling during oil-in-water filtration using tubular ceramic membranes.

Leth, A. de (2023) Design of a cell-based straight guidance.

Leunissen, Ir. Anouk (2020) Estimation of the Centre of Mass Position, Linear Momentum, and Angular Momentum of a Human Wearing an Exoskeleton.

Li, C. (2023) Catheter modelling and force estimation in endovascular application.

Lieftink, R.J. (2017) Design of an anti-slip control system of a Segway RMP 50 omni platform.

Liet, S.R. (2024) An experimental setup for validation of the plane wave methods.

Ligtenberg, L.W. (2024) Simultaneous actuation and localization of biocompatible untethered magnetic robots inside ex vivo arterial systems.

Limpers, W. (2022) Production process design in the sheltered workshop of VMI.

Lin, YuanXiang (2019) Design of Pneumatic Soft Surgical Robot for Endoscopic NOTES and MIS Application with Reduced size.

Lingbeek, R.A. (2003) Aspects of a design tool for springback compensation.

Linschoten, D. (2019) A Computer Aided Innovation Tool for Generating Solutions for Mechanical Engineering Functions.

Liu, Jen-Wei (Luke) (2020) Towards an engineering approach of pool fire modelling with CFD.

Lobregt, Maarten (2020) Exploring an incremental pathway to the development of multi-use exploitation within offshore wind farms.

Lochem, S.H. van (2023) Developing a realistic venous model for in-vitro application of the eduECMO trainer.

Loenhout, F.H.C. van (2022) Designing zero-mode waveguides for fluorescence experiments on α-synuclein and DNA.

Loman, G. (2022) Design of a stable steering mechanism for trikes : prevent the trike from tilting and keep your feet from the floor.

Lommers, Sander G. (2012) Van passend zitsysteem naar passend informatiesysteem.

Loobergen, K. van (2020) Identification of damage precursors in 3D-printed aluminium alloy after fatigue testing.

Lopez Aguado Alvarez, José Pablo (2023) Automation of a High Precision assembly process.

Lubbers, Lieke (2013) Operational data quality : A case study about the quality of net purchase prices in the catalog of bol.com.

Lucas, W.E. (2022) Developing a design method and tool for producing customizable forming shoulders.

Lunshof, Corné (2024) Implementing data-driven maintenance at Stork IMM.

Luten, T. (2022) Characterization of the Onset of Boiling for Ammonia in Minichannels.

Lübbermann, Thijs (2021) Design and control of a magnet placement tool.

Maat, Daniëlle (2023) 3D Simulation of a wind turbine rotor in axial inflow conditions.

Maat, R. van der (2022) The use of a fully recyclable, biomass based thermoplastic as a wood coating.

Madhar, M.C. (2016) Towards the design of a vibration monitoring system for a rotor blade system in operation : an experimental investigation.

Mak, Y.X. (2015) Realization of mini segway robot using NI MyRIO.

Mak, Y.X. (2018) Head Motion Controlled Endoscopic Camera Manipulation using Inertial Motion Sensor and Mixed Reality Headset.

Maksane, A.R. (2019) A Decision-Support Methodology to design Reconfigurable Manufacturing Systems.

Manen, B.T. van (2021) Learning to explore and map with EKF SLAM and RL.

Manourat, Norrasaet (2019) The development of a cable-driven variable stiffness mechanism test bed.

Manten, Dion Jean François (2022) Technology roadmapping to develop the innovation strategy in engineering consultancy.

Maryam, Sahlabadi (2023) Balancing Energy Transition Policies & Sulfur Recovery Efficiency in the Netherlands.

Masmeijer, T.C.P. (2021) Vibration fatigue testing and modelling for identification of damage initiation and propagation in fiber reinforced plastics.

Mastenbroek, Jan-Jaap (2010) Bluff body flow : wake behavior behind a heated circular cylindeer.

Mateo, Mikel (2019) Myoelectric control of bionic hands via musculoskeletal modelling, admittance control and force feedback.

Materne, L.J. (2021) Is electric vehicle drivers’ cognitive workload increased by eco-driving feedback in the face of range anxiety?

Mathivanan, Rajavarman (2020) Texture Based Autonomous Reconstruction of 3D Point Cloud Models using Fully Actuated UAVs.

Meer, A.J.M. van der (2016) Mapping the underworld.

Meijer, H.J. (2017) Active control of time-varying broadband noise and vibrations with parallel fast array recursive least squares filters using online system identification of the secondary transfer path.

Meijer, S.D. (2018) The implementation of collision avoiding haptic feedback in the pedal-based control of a robotic platform.

Meijers, R. (2022) Qualitative flow sensing with 3D-printed sensors for application in a robotic bird.

Mekers, R.L.J. (2020) Structural dynamics of roller coaster structures: transient analysis.

Melching, Marcel (2010) Invensys programmable home thermostat: designing a usable user interface.

Melis, Peter (2013) Change requires insight - Assessing upstream scope 3 emissions by SMEs in the contruction industry.

Mes, T.G. (2018) Updating rotating documentation in Grade 5 Nouryon Rotterdam Botlek.

Mesu, J. (2023) Development of a methodology for efficient determination of process parameters in Pulse Electro-Chemical Machining.

Meurs, D.G.H. van (2024) Development of a One-Part Bistable Eyeglasses Frame Design for FDM Additive Manufacturing.

Meutstege, Esken (2014) Micro-valve with in-plane fluidics using surface channel technology on SOI wafer for use with micro-Coriolis sensor.

Meyere, K.P. de (2018) Model making and haptic controller design for the ReFlex TakkTile.

Mirwani, Yash (2020) Redesign of the PIRATE robot.

Moester, M.T. (2022) Development of Metamaterials for a Custom-fit Bicycle Helmet Liner.

Monchen, Niek (2024) The production and characterisation of magnetic particles produced with in-air microfluidics.

Mooij, Q.J. (2023) Building a knowing maintenance organization by introducing a Knowledge Improvement Process for predictive maintenance at the Royal Netherlands Navy.

Morra, B.C.J. (2023) Design of a rapid characterization method to predict the sealing behaviour of LLDPE packaging films.

Muetstege, C (2022) Demonstration of a multi-axis stepper motor in a robotic system.

Mulder, Adrianus J. (2011) Decay functions in commodity freight flow models - A regression model for deriving the decay parameter.

Mulder, L. (2017) Applied frequency-domain system identification in the field of experimental modal analysis.

Mulder, L.H.W. (2023) Investigating the effect of misalignment on the efficiency of fiber array to grating coupling to support the design of a sophisticated passive degree of freedom alignment system.

Mulder, R.H. (2023) Financial viability of metal additive manufacturing in automotive industry for production of functional parts in high volume.

Nadgere, Nimish B. (2020) Haptic Rendering/Control for Underactuated QB SoftHand using Haption HGlove.

Naik, Pratik (2021) Generating Sythetic Training Images for Instance Segmentation using Salient Object Detection and Image Compositions.

Nandi, S (2020) Reduction in Controlled Degrees of Freedom for a Cable Driven Variable Stiffness Actuator.

Napel, Ir. J.H. ten (2019) Design, fabrication and characterisation of a multi-purpose undirectional recirculation unit on-chip.

Nastos, Vasileios (2011) Developing a realistic view on the availability of renewable resources for the road transport sector in the Netherlands in 2050.

Nethe, Eamon G. (2021) Electrostatics for mobile glass cleaning robots.

Neuvel, P. (2020) Developing a reliable method to connect conductors to 3d printed conducting structures.

Niehoff, Dennis (2018) Evaluation of Motion Control Algorithms for Miniaturized Agents Moving Inside 3D Fluidic Microchannels.

Nijboer, T.M. (2024) Kickstarting the Next Step in Urban Mobility. Design of an Interactive Design Tool & a New Urban Electric Vehicle.

Nijenhuis, N. (2014) Ontwerp een freesrobot.

Nijhuis, B. (2018) Investigation of the Scope and Limitations of Gradient Enhanced Crystal Plasticity in Explaining Macroscopic phenomena.

Nijhuis, M.F.H. (2023) Passive photonic chip-fiber alignment with a flexure-assisted micro-kinematic coupling.

Nijkamp, A.H. (2022) Modelling of laser beam absorption in powder-based sintering processes.

Nijland, Lorenzo D. (2023) Optimization of product handling in the agricultural sector of an underactuated flexure-based gripper by using Bayesian estimation.

Nikolova, K. (2022) Framework and practical guidelines for creating a current state analysis for (re)designing an HMI within the Industry 4.0 era. Case study.

Nizamudeen, M.S. (2023) Computed Torque Control of Flexible Multibody Systems.

Nooijen, S.M.P. (2023) Concept study on novel gripper concept for in-hand rotational manipulation of poultry products.

Noort, Luc van (2024) Sensor Framework For Pediatric Cerebral Palsy Ankle Foot Orthosis : Development and Technical Validation.

Novillo Calvo, MSc Bme Ignacio (2023) Design of a high-level position controller for an Assistive Hinged Ankle Exoskeleton.

Okken, B. (2017) Design and Empirical study of tilting propellers of an over-actuated quadrotor.

Okken, Boi (2021) Design and Development of a Magnetic Non-linear Elastic Element and Control for Progressive Series Actuation.

Olimulder, R. (2013) The boundary layer of a fluid stream over a flat plate.

Oliveri, G. (2016) Developing a parametric model for Air Bearing calculations in COMSOL and further refinement of the currently existing models.

Olthuis, M. (2020) Relevance and development of new rubber technology competences for a sustainable automotive industry.

Ooijen, P.M. van (2022) 3D printing of sensorized pneumatic artificial muscle actuators.

Oomen, Matthijs A. (2012) Interaction between gloves and ball surfaces in afl and rugby.

Oonk, Dennis (2023) Enhancing Upper Limb Prosthetics Design for Improved Strength and Modularity : An User-Focused Approach in Sierra Leone.

Oosterhuis, J.P. (2011) Recuperation in a μCHP appliance.

Oosterveld, F.R. (2021) Investigation of delamination crack under vibration fatigue exploiting simulation driven dynamic testing in digital environment.

Oosterveld, S.W.S. (2023) Momentum-based control for compliant link quadrupeds.

Oude Luttikhuis, Ellen (2010) Het interactieve zuivelschap.

Oude Tanke, Friso (2024) Mode I fatigue delamination growth in composite laminates : design of an automated DCB test setup.

Overbeek, A.H.G. (2021) Passive and Stable Impedance Reduction of Hybrid and Flexible Link Serial Robots Using Position, Force, and Acceleration Feedback.

Overbeek, A.H.G. (2021) Passive and Stable Impedance Reduction of Hybrid and Flexible Link Serial Robots Using Position, Force, and Acceleration Feedback.

Pakkirisamy, P.K. (2020) Control of exoskeleton using synergy-driven neuromusculoskeletal modelling.

Palthe, A.M. (2021) Substructuring in flexible multibody dynamic models.

Panambur Venkatraman, V. (2019) A sensor fusion technique for head motion controlled endoscope camera system.

Parvangada Chinnappa, Uthaiah (2023) An Approach for Risk Mitigation and Safety During Human-Robot Collaboration.

Patel, A. (2023) Numerical Investigation On The Thermal Behavior Of Li-ion Batteries Under Various Cooling Methods.

Pennestri, Pietro. (2022) An FPGA based sensor fusion algorithm for IMU data processing.

Peperkamp, M.W. (2021) Design and optimization of the pultrusion process toproduce reliable and recyclable wind turbine blades.

Peters, Joost (2008) Performance measurement for All IP : developing a performance measurement instrument for a local roll out project of the All IP Network.

Petter, J. (2018) Procesbeheersing door Single Piece Flow : de implementatie bij de pneumatisch bediende afsluiters.

Philippi, Antoon (2011) Increasing performance by enhancing hip stiffness.

Piening, P.V.L. (2022) Low frequency calibration of an acoustic vector sensor using immersive wave propagation.

Pindi Nataraj, P. (2022) Airfoil self-noise predictions using DDES and the FWH analogy.

Plaisier, Thomas (2017) Reducing apparent inertia in a tool for minimally invasive surgery.

Ploeg, Maurice van der (2023) Improved Range of Motion of a Redundantly Actuated 3-DOF Planar Manipulator with Flexure Joints.

Plura, F. (2016) Part optimization design studies in the modern aircraft industry.

Pocorni, J.K. (2012) Penetration depth control using an optical spectroscopic sensor in ND:Yag laser welding.

Poel, B. van der (2013) Time-domain impedance boundary conditions in computational fluid dynamics for use in thermoacoustic modeling.

Polman, Harmen (2019) A Code for Refractive Index Matched Scanning Data Processing.

Poortema, K. (2018) Transport binnen het productieproces : de optimalisatie van routes van afsluiters op de werkvloer bij HP Valves.

Postmes, Jonne F. (2022) Maximizing energy absorption properties of 3D printed programmed auxetic metamaterials.

Posłuszna, Zuzanna (2023) Shape analysis for the design of a preformed osteosynthesis plate for accurate zygomatic reconstruction.

Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.

Prieto Serratos, Erik Armando (2017) Multilevel panel method validation using the New MEXICO Wind Tunnel Measurements.

Punte, H.J. (2024) Adapting Tradespace Exploration for Conceptual Structural Design of Monopile Upending and Lifting Tools.

Puttkammer, P.P. (2013) Boundary layer over a flat plate.

Quak, Wouter (2007) A solid-shell element for use in sheet deformation processes and the EAS method.

Rakels, Thijs D. (2023) PID tuning for electromechanical systems based on dilated LMI optimisation.

Ramaker, K.A. (2016) Plasticity and fracture modeling of composite steel Tribond 1200 for crash simulation.

Ramnath, Suraj (2012) Verbeteringen voor de planningsmodule in Axapta van Rotor.

Rao, Bolar Vanishree (2021) A study towards the optimization of pultrusion processes: process - microstructure -property correlation.

Raven Garcia, J. (2023) A geometric port-Hamiltonian modelling and simulation framework for morphing-wing UAVs.

Ravenhorst, J.H. van (2008) A rapid prototyping system for the Hot-Wire cutting process.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Reekers, F.A.D. (2019) Internal logistics tire parts and material handling equipment : A discrete event simulation study for control rules.

Reiling, Mark (2014) Implementation of a Monocular Structured Light Vision System for Pipe Inspection Robot PIRATE.

Reuling, M.C.T. (2020) Mechanical interlocking of hybrid PAEK joints using additive manufactured : a study on mechanical interlocking performance and interlocking phenomena enhanced metallic surfaces.

Rezelman, SA (2023) Compounding and characterization of tire tread compounds using funtionalized rubber.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Riel, M. van (2005) Determination of the transverse stress in a combined tensileshear test.

Rietema, M.J. (2015) Design of a prototype machine for 3D printing with continious fibre reinforcement.

Rijt, J.T.J. van de (2022) Design of a Momentum-Based Optimal Controller for a Lower Limb Humanoid.

Rinsma, S.G. (2014) Design of a Reusable Teleoperation Control Architecture Applied to the youBot.

Roelofs, Stijn (2024) Developing a user-friendly design workflow for optimised designs in Direct Energy Deposition Additive Manufacturing at Royal Kaak.

Ronduite, A. (2023) Simulating and testing of the movement of a millirobot influenced by a static magnetic field.

Roo, M. de (2015) Optimal Event Handling by Multiple UAVs.

Roodink, Sander (2020) Controlling deformations of a 3D-printed vibrating beam using stiffness modulation.

Rooijen, T.L. van (2024) Towards Defect-Free Printing of High-Strength Aluminium Alloys.

Roosenschoon, N. (2024) Digital twinning development in manufacturing SMEs : the design of a supporting methodology and evaluation tool.

Roozendaal, R. (2022) Computational modeling of interstitial fluid in the brain neuropil for an improved understanding of solute transport in the brain.

Roozing, W. (2014) Control strategy for variable gait using variable knee stiffness in a bipedal robot model.

Rossides, Charalambos (2016) Design and implementation of a modular, customizable and multi-modality compatible actuator with position feedback.

Rous, E. (2021) Shopfloor Organization and management system : developing a software system for a matrix-production system.

Rouwenhorst, Driek (2011) A numerical and experimental study on turbulent natural convection in a differentially heated cavity.

Rozendal, S.P. (2021) Field-Weakening and Fatigue Management for Explosive Robotics.

Ruitenbeek, Floris van (2023) Design of a Variable Stiffness Mechanism with Prescribed Behaviour Using a Variable Cam Pulley.

Rutten, L. (2020) Computational fluid dynamics in the stented arteria femoralis superficialis.

Sanders, M.P.J. (2014) The Boundary layer over a flat plate.

Sanders, R.V. (2017) Active heave compensation - simulation of a prototype heave compensation system.

Sankara Subramanian, G.K. (2018) Improving the prediction of pressure gradient field in wind farm numerical simulation method, WAKEFARM.

Santana, Tiago de (2018) A feasibility study of electric cars powered by solar energy : The cases of The Netherlands, Norway and Brazil.

Sathiyanarayanan, Prasanna (2021) Data Driven Feedforward Control of a 2-DOF Redundantly Actuated Manipulator with Flexure Joints using Machine Learning Techniques.

Schaaf, J.R. (2023) MPC design for a precision, flexure based, pendulum.

Schepers, P. (2019) Application of a process model to define potential operational functional failure conditions.

Schermer, F.W. (2022) Computational modelling of cerebrospinal fluid flow in perivascular spaces.

Schilder, W. P. (2019) Design of a flexure-based tip-tilt-piston mechanism with high support stiffness.

Schippper, Menno (2009) Turbulentie in accountancy : over de recente ontwikkeling in de Nederlandse accountancy sector.

Scholten, C.L.P. (2019) Embodiment of prostheses : becoming part of the body-image.

Schonewille, R. (2017) Design of an energy harvesting system for wireless sensor nodes on railway tracks.

Schouw, C.Q.G. (2023) Replacement of Carbon Black by Renewable Fillers in Natural Rubber.

Schreuder, N.W. (2014) Maximizing flexibility through minimizing changeover time.

Schriemer, D.W. (2023) Numerical Validation and Modelling of Inversely Tracing of Particles to Locate Emanating Sources.

Schrijver, J.E. (2023) A novel framework to aid in the design of automated systems at veal abattoirs : a case study.

Schulte, T.M.G (2023) Managing the development of a two-story storage park.

Schut, Thomas (2017) Sensing of multiple parameters in a micro-fabricated flow system.

Schuttert, W.J. (2022) Design and Optimisation of Roller Coaster Elements using Reinforcement Learning.

Sharma, Y. (2020) Rain erosion damage assessment using ultrasonics.

Siebers, E. (2022) Development of a method to assess the environmental impact of a system with a long life cycle : a case study on train films at Fleetshield.

Siegersma, Jan (2011) Van Oord : afsluitend verslag van een stage bij Van Oord te Rotterdam en Kleipeda (Litouwen) in 2011.

Sikkelbein, D.B. (2021) Process modelling for Model Predictive Control of Incremental Sheet Forming.

Sikkens, B.N.A. (2013) An analysis of Coriolis mass flow chips with a bypass.

Sikkens, Boudewijn N.A (2017) Modelling, design and fabrication of a 3D force sensitive stylus.

Simanjuntak, Denny Hariadi (2020) Derivation of crack growth law from high cycle fatigue vibration testing in thermoplastic-based composites.

Sirboiu, D.C. (2020) 3D printed acoustically transparent pressure sensor for breast cancer detection.

Smink, J.S. (2020) Investigation of Behaviour of Jet Shear Layer in Tandem Dual Jet Injection in Supersonic Crossflow using Schlieren Images.

Smit, G.J.F. (2022) Development of a Maintenance-based use policy and application to HNLMS Johan de Witt.

Smit, Maarten Jan (2012) Thermal control and rate of deposition system of chemical vapor deposition at atmospheric pressure : production of thin tin-oxide films by an APCVD process.

Smit, T.S. (2023) Linking safety hazards to control measures for NS rolling stock.

Solombrino, Caterina (2023) Aerodynamic investigations of flatback airfoils and novel add-ons for modern wind turbine blades.

Spanjer, S.T. (2019) Acoustic and vibration analysis of an electric powertrain for passenger cars.

Stevens, F.H. (2023) Design, implementation and validation of a viscoelastically overconstrained flexure mechanism for increased dynamic performance.

Stolwijk, B.A. (2022) Improving the ferrohydrodynamic pump for a magnetocaloric refrigeration cycle through modelling and experiments.

Stoop, Jasper (2023) Additive manufactured enhancement for Two-phase CPU cooling.

Strik, D.H. (2023) Influence of print speed on the microstructure and mechanical properties of AA6060 FSEAM builds.

Stroeken, K.L.J. (2014) Floor vibration isolation of a coriolis mass-flow meter using filtering techniques.

Stroet, J. (2020) Impactor Design for In-pipe Impact-echo Inspection Method: A Morphological Analysis.

Stöver, P. J. (2021) Building a test setup for pulsed laser ablation in liquid flow.

Sutaria, S.S. (2021) Improving the dynamic performance of sewer inspection robot.

Talele, A.S.T. (2016) Inertia driven controlled passive actuation with the Dual-Hemi CVT.

Teeffelen, K.J. van (2018) Intuitive Impedance Modulation in Haptic Control using Electromyography.

Teshome, M.M. (2012) Modelling and analysis of reliability and long run availability of a fleet of rolling stock.

Teunis, G.E. (2015) Output-only modal-based structural health monitoring in composite beams.

Thije, S.A.M ten (2022) Model-Based Systems Engineering Approach : Conceptual Design of the Powertrain for a 3D Motion Compensated Crane.

Tichelaar, J. (2018) 3D-printed implementation of a tactile force sensor working in multiple DOF.

Tiemessen, P.V. (2010) RAMS en snelwegsystemen: belangrijke invloedsfactoren en mogelijke maatregelen : een onderzoek naar de belangrijkste invloedsfactoren op de RAMS prestatie van snelwegsystemen en mogelijke maatregelen om de RAMS prestatie van snelwegen te verbeteren.

Tiggelen, Jip van (2022) An investigation on the nonlinear dynamic behaviour of jointed space structures.

Tijman op Smeijers, T.J.C. (2024) Hybrid and disturbance-observer-based control of a peristaltic pump.

Timmer, Rick Nando (2019) Project Manager at Schrader T+A Fahrzeugbau: Redesign of production process.

Tjepkema, W.W.A. (2021) Design of a surgical manipulator using smart materials.

Tran, Trung Quoc (2012) Possibilities for improving assessment tools of dikes safety.

Trouwborst, C. (2017) Towards increased autonomy of a rail-guided robot for the inspection of ballast water tanks.

Uiterweerd, Eline (2023) Improving information traceability in high-tech contract manufacturing environments.

Uğurlu, Deniz Alp (2023) Enhancing Untethered Robot Localization : A Fusion Approach Integrating Magnetic Coupling Localization and Ultrasound Imaging.

Vacariu, P. (2021) PIRATE Robot Autonomous Navigation through Complex Pipe Networks using Reinforcement Learning.

Vaithiyanathasamy, Mr. Rajesh (2017) Double wake model for separated flows over airfoils.

Valk, Y.A. de (2019) A novel construction of wind tunnel models for wind energy applications.

Vallinas Prieto, Ander (2019) Time-domain passivity enforcement for mass reduction in admittance control.

Vaseur, C.S.E. (2014) Robird wind tunnel test setup design.

Velde, Lennart van de (2018) Computational Fluid Dynamics : a clinician's tool for Femoral Artery Stenosis?

Veldhuis, J.J. (2023) Development of a Cabinet Side Cooler for Application on a Naval Ship.

Veldhuizen, A.R.P. (2024) Reducing Pulsation in External Gear Pump Output for Rubber Extrusion.

Veldman, Else (2006) Using optimisation techniques to solve a production problem, with application to the deep drawing process of an automotive part.

Velu, E.V. (2018) Design of a sit-to-stand controller for a lower limb exoskeleton and validation by feasible crutch usage identification.

Ven, C.J. (2023) Investigating the possibilities of a flexible manipulator in Amesim to predict reaction forces.

Venezian, Roberto (2021) Control of Untethered Helical Robots at the Interface between Newtonian and Viscoelastic mediums.

Venkataramana, Shrikanth (2021) Effects of surface treatment on co-bonded wind turbine blade spar caps.

Venterink, M. (2017) Frequency optimisation for damage identification using the Vibro-Acoustic Modulation method.

Verhoeven, J.P. (2023) A Controller for Corrective Stepping for a Bipedal Exoskeleton Robot.

Vermeulen, J.J. (2019) Flexible multibody dynamics of an Afterburner-type fairground attraction.

Vidya, M. C. (2014) Oscillatory Flow in Jet Pumps: Setup Design and Experiments.

Vis, J.M. (2023) Ultrashort pulsed laser ablation in mass production of small metal parts, increasing ablation efficiency and reducing heat input.

Visser, F.C. (1991) Two-dimensional potential flow through a centrifugal impeller.

Visser, F.F. (2022) Enhancing the Ti-PEKK hybrid joint by changing the PEKK crystal morphology.

Vloedgraven, B.T. (2023) System role of energy hubs in the North Sea by an energy system optimisation study.

Vluttert, N. (2016) The absorption of moisture by metal powder in a humid environment and the effects on its composition.

Voerman, M. (2012) Research into the effect of counter-rotating propellers, for the propulsion of a vertical take-off and landing ducted fan UAV, on the flow pattern.

Vogelzang, Kevin (2020) Development and evaluation of a safe Fall Controller for a Lower Limb Exoskeleton using reinforcement learning.

Voormolen, M.S. (2015) An improved bending model for thermoplastic composites in forming processes.

Voorthuizen, K.L. van (2020) Uncertainty quantification in flexible multibody dynamics.

Vries, J.F. de (2018) Redesign & Implementation of a Moment Exchange Unicycle Robot.

Waasdorp, W.P. (2018) Influence of suboptimally forced streamwise streaks on the turbulent boundary layer and shear layer.

Wachter, J.C. (2011) Thinking out of the hot box : a simulation study aimed at the increase of hot charging and average charging temperature at the hot strip mill of Tata Steel IJmuiden by using hot boxes.

Wanders, I. (2014) Design and analysis of an optimal hopper for use in resonance-based locomotion.

Weekamp, Bram. J. W. (2023) Performance Comparison of Optimised Flexure-Based Translational Mechanisms for Easier Design Decision-Making.

Weerd, G.J. van de (2023) Development and comparison of open- and closed-loop control of untethered microrobots in a tuneable magnetic trap.

Weerd, Lianne van der (2012) Wave-driven dynamics of Shoreward propagating acretionary waves in the nearshore.

Weijden, Wiard van der (2023) Integrating sensor and material modeling to interpret eddy current sensor readings.

Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.

Wellen, S.G. (2024) Modelling study of the thermal management of a RSOC system.

Welleweerd, M.K. (2017) 3D Printing a three degrees of freedom force sensor.

Wentink, J.S. (2023) Envisioning future applications of Augmented Reality: An agriculture 4.0 case study.

Werf, MSc S.IJ. van der (2019) Macroscopic single contact properties of cohesive silanized glass beads.

Werff, S.J. van der (2023) Towards a ball bouncing demonstration for the T-Flex.

Wesselink, Britt Anna Maria (2022) Differentiation of hPSC derived embryoid bodies to atrial and ventricular CMs in a trapping system on a chip : Defining requirements for asymetric differentiation on chip.

Wessels, B.J. (2020) A numerical study to help understand the effects of Nasal High Flow Therapy using the Lattice Boltzmann Method.

Westerbeek, J.J. (2023) Item availability restricted.

Westerik, P.J. (2014) MEMS acoustic sensors inspired by the locust ear.

Westerveld, C.E. (2021) Generative Design : recommended actions to smooth the way for production of generative designs with additive manufacturing.

Wetsteijn, D. (2022) Characterization and Analysis of the MINIject Eye Implant.

Wicaksono, E. (2022) Smart metering to asset/human tracking for industrial applications.

Wiebenga, J.H. (2009) Improve the predictability of crashworthiness simulations with respect to head-impact onto the Volkswagen Polo Dashboard.

Wieringen, Seth van (2021) Transitioning to cost-optimal renewable energy systems under uncertainty.

Wijk, BSc. Cedric F.C. van (2020) Design of a Small Wind Turbine Rotor and Hub for Wind Tunnel Testing.

Wijk, R.F.O. van (2020) Design of a Small Scale Wind Turbine Nacelle and Tower for Wind Tunnel Testing.

Wijlen, E.V. ter (2007) Optimisation of a deep drawing process with experimental validation: Applied to an automotive deep drawing process of a B-pillar.

Wijntjes, M.J. (2022) Robotic needle steering for prostate brachytherapy in a MR environment.

Will, J.B. (2017) Aerodynamic noise of thin airfoils in turbulent flows : a detailed experimental validation of semi-analytical methods.

Wilpshaar, Martijn (2019) Conceptual design & experimental validation of Mars helicopter.

Wisselink, W.J. (2018) Future Flamco : a scenario-based simulation approach for smart intralogistics.

Wittenstrom, B.K. (2021) Unifying state representation learning with intrinsic motivations in reinforcement learning.

Wolf, E.R.B. de (2016) Designing an interaction method for the holograms of today.

Wolf, T. (2016) Design of an Air Factor Sensor based on Light Emission.

Wolff, T.I. de (2017) The Design and Fabrication of a Biomimetic Lifting Aid.

Wolters, Joris (2014) Design and constructioin of a setup that represents the behavior of a helicopter rotor blade system.

Yadhukrishnan, (2023) Designing and Optimizing a flexible Battery Pack Manufacturing Process Incorporating Cylindrical and Prismatic Cells: Key Factors and Strategies.

Yang, Jinyi (2021) Towards process optimization of spar caps made of carbon fiber reinforced polyurethane composites used in wind turbine blades.

ZHU, H. (2017) DEVELOPMENT OF SMART INDUSTRY MATURITY MODEL.

Zee, R. van der (2020) Cutter tooth replacement robot.

Zeeburg, T. van (2008) Het gebruik van procescriteria door gemeenten : een onderzoek naar de barrières en de best practices die Nederlandse gemeenten ondervinden bij het operationaliseren van proceskwaliteit.

Zegwaard, Patrick Mr. (2021) Design for production of a diabetic-foot protector.

Zeldam, S.G. ten (2018) Automated Failure Diagnosis in Aviation Maintenance Using eXplainable Artificial Intelligence (XAI).

Zijden, C.W.J. van der (2023) Analysis of an active tagline trolley system for offshore single blade installations with floating vessels.

Zijl, Roy van (2021) Rate-Dependent Properties and Failure Behaviour of Glass Fiber Reinforced Isotactic Polypropylene Composite Laminates under Impact Conditions.

Zijp, S.F. (2023) Remaining useful life estimation framework for maintenance improvement of a helicopter main rotor shaft using fracture mechanics.

Zuiderduin, E.R. (2019) Optimizing Geometric Parameters of a Coaxial Nozzle for Direct Bubble Writing.

Zwiep, L.G.H. (2021) Mechatronic solution for stress-wave generation using impact echo.

Zwijgers, E. (2019) The effect of partner performance on arm impedance modulation during haptic human-human interaction.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.

Internship Report

(2018) Item availability restricted.

Aalst, J. van (2014) Setting up a TPM based maintenance plan for VDL-ETG Suzhou in order to improve the machine quality and reduce downtime of the machine park.

Abbekerk, T. (2017) Item availability restricted.

Achterberg, Wouter (2011) Stageverslag Ergo-design.

Adhikari, S. (2014) Internship Report on benchmarking of Python based turbine model of cost of energy model; and generation of load coefficients to be used in the turbine model.

Al, Martijn (2012) Design of a pretreatment installation for the washing of empty fruit bunches at a palm oil mill.

Alan, G.A.S. (2016) Compressor temperature during blow down.

Aman, B.J. (2015) Door construction.

Andree, D.J. (2017) Thermal Analysis of a heavy duty drum motor.

Anema, J.S. (2015) Modeling and improvement of a field electric retarding potential characterization system.

Assema, P. van (2017) Item availability restricted.

Attema, D. (2012) Stageverslag Huisman Equipment B.V.

Baan, H.J.M. (2013) Designing a mannequin for aerodynamic bike testing.

Bairaktaris, D. (2014) Project feasibility of wood fired CHP.

Bakhtiary, Amir (2011) Defect detection and evaluation of laminates.

Bakker, H.M. (2011) Integrating TRIZ function modeling in CAD software.

Batista, M. (2017) Design and development of two medical devices to assist the rehabilitation of the upper limb mobility in post-stroke.

Beekhuis, Houdijn (2011) Internship Report Atesos Medical AG.

Beekman, P. (2015) Design and modelling of solar tower field components.

Beem, P.H. (2015) Associate Consultant Intern at Bain & Company.

Bekius, H.M. (2013) Research in flammability limits and deflagration to detonation transition of ethanol.

Bekker, S. de (2015) Design of OLED Capsule and automated blade coater.

Beld, E.J. (2013) Droplet impingement and film layer modeling as a basis for aircraft icing simulations in openfoam.

Belt, M. van den (2016) Design of amusement rides.

Benjamins, Jeroen (2009) Waternish.

Benthem, A van (2015) Determination of design resistance by finite element analysis.

Benthem, W. (2012) Analyse en ontwikkeling van een 2,5 DOF manipulator.

Bergsma, Friso (2012) Effects of rig tension on sailing yacht performance : internship report.

Berns, L. (2018) Item availability restricted.

Berntsen, J. (2017) Formability of G/PP composites : effects of defects.

Beugels, F. (2017) Failure analyses on the Lint trains operated by Arriva Tog Danmark.

Bhagwandas, J.C. (2015) Energy from the sea : hydrothermal liquefaction of algae.

Bijl, Sander (2012) Constructing models for a pebble heater and drying wood : internship report.

Bima Angunn Putra, A. (2015) Feasibility Study of Power to Gas Technology at Twence.

Binnerts, B. (2011) Signal processing in experimental room acoustics.

Boekeloo, A. (2013) Let the water run : design and implementation of a micro hydropower project in Tumianuma, Chirusco valley, Ecuador.

Boer, R. de (2012) Ontwerp van concepten en testopstellingen : stageverslag.

Boom, R (2016) Vehicle response on standardized tracks.

Boon, J P (2016) Designing a sustainable and energy-neutral business park.

Boonk, K.F.J. (2019) Internship at Qirion: internship report.

Bootsma, Klaas (2011) Item availability restricted.

Bosman, R. (2012) Torque in a spiral conveyor : calculation model in Excel.

Bosscha, A.J. (2013) A study in beamforming and DAMAS deconvolution.

Bosscher, H.H. (2014) Theoretical and practical approach to improve the film flow of the flywheel experiment.

Bouten, T.W.F.M. (2011) Item availability restricted.

Bouwhuis, T. (2016) Investigation into a new simple DBD-plasma actuation model.

Bouwman, M.M. (2014) Testing polymer-metal hybrid automobile components at Daimler AG.

Boveldt, Arend te (2011) Internship at Nakilat Damen Shipyards.

Braak, P. ter (2011) Item availability restricted.

Braakman, Patrick (2018) Item availability restricted.

Braakman, R. (2017) Redesign of the Shoulder Elbow Perturbator.

Braam, L. (2018) Do simplifications in the intitial set-up matter?

Bramer, K.J.J. (2017) Designing and prototyping a small scale steam driven jet pump.

Brands, D. (2015) Preforming process simulation.

Bremer, S.J.L. (2017) Item availability restricted.

Brentjes, A. (2015) Modelling liquid sloshing in rotating t anks.

Brinck, T.W.A. ten (2014) Accenture innovation Awards 2013 : Internship report Thijs ten Brinck.

Brink, J. van den (2017) Re-design of the heat exchanger in a thermo-acoustic heat pump using C-lamel fins.

Broenink, W.A. (2016) Oxycoal combustion tests in CIUDEN.

Broersma, M. (2014) Heyson Wall Correction Code for the DNW LLF.

Brouwer, W.R. (2015) The application and comparison of multistep ice accretion analyses.

Bruggink, Mart (2012) Stageverslag.

Bruinja, M.F.C. (2011) Item availability restricted.

Brummen, S. van (2015) Aerodynamic analysis of the EFTV-ESM and separation dynamics in hypersonic flight conditions.

Budding, Alex (2011) Item availability restricted.

Buitink, M.N. (2016) Impact van het 20 kV beleid van Liander op de netverliezen in het middenspanningsnet.

Bullee, P.A. (2015) Natural convection flows inside differentially heated cavities.

Buren, P. van (2015) Inspectieplan onderhoud in de bottelarij.

Burghout, R.A.B. (2016) Exploratory CFD research on a Coriolis mass flowmeter.

Bus, M.S. (2013) Review of the impact of hydrogen addition to natural gas on gas turbine combustion.

Böke, M. (2016) Direct aeroacoustic simulation using compressible flow solver.

Campmans, G.H.P (2013) Validating dense-gas models recently added to the Computational Fluid Dynamics code Eilmer3 at University of Queensland.

Chengappa, Rakshith Mukkatira (2018) Charcoal cooling.

Cijsouw, J.W. (2016) Crossing Obstacles.

Cnossen, M.C. (2010) Ventilatiesystemen : stageverslag.

Consten, N. (2014) Nanoindentation of Hard Coatings.

Cornelissen, Robin and Pouwels, Astrid (2018) Item availability restricted.

Coughlan, Darren (2010) HTHW temperature reduction.

Dagioglou, S. (2014) Development of a controller implementing the energy-planning phase of Triana using the Flexible Power Application Infrastructure.

Damen, R.G. (2013) Evaluation report LECO Energy Management System.

Deijlen, Lisa (2017) Experimental research on cavitation in a water tunnel at the University of Michigan.

Dekker, J.J.J.W. (2017) Programming for MrReves (Reden virtual engineering system) in C#.

Dekker, M. (2013) Body Weight Support System for LOPES2.

Derkink, I.H. (2015) ORC Evaporator fouling by biomass combustion.

Desai, A.S. (2018) Modular pallet design.

Detert Oude Weme, D.G.J. (2015) Designing an Induction Wind Tunnel.

Deunk, F.H.J. (2014) The Swiss and Dutch Precision Industries.

Dhau, K.I. (2019) The Effect of Woody Biomass Characteristics towards the Yield and Quality of Pyrolysis Oil at Twence.

Dickhof, H. (2016) Design and construction of a spray pontoon and maintenance of HAM 310.

Diepen, T. van (2015) Design for vacuum systems.

Diepeveen, H. (2018) Redesigning the evaporator for the Triogen ORC (Organic Rankine cycle) for use in the containerized version of this ORC (the so called Triogen E-box).

Dijk, J. van (2017) Commissioning of an Flame Reactor for Research on Entrained-Flow Gasification.

Dijk, N.J.G. van (2016) Internship Rolls-Royce Deutschland : aeroacoustics and noise.

Dijk, R.M. van (2014) Parameterstudy on a computational method for the prediction of noise production caused by sheet cavitation on a ship propeller.

Dijk, W. van (2018) Item availability restricted.

Dijkstra, E.J. (2010) Upper limb project.

Dixhoorn, F. van (2016) Evaluation of the Potential of Diaper Recycling Within AEB Amsterdam.

Donderwinkel, T.G. (2014) Internship report.

Drenth, B. (2016) Experimental validation of simulations on flow through venturis and diffusers.

Duin, E. van (2014) Validation of a measurement system used for quality control of one-way reflective targets.

Duisterwinkel, F.J.F. (2015) Improving convergence of numerical optimizers using a limited number of function evaluations.

Duivenvoorden, Aard (2011) Item availability restricted.

Eekelen, L.D.P. van (2015) Reduceren van het aantal uren in het volgoed magazijn door het gebruik van de DMAIC methode.

Eijkelkamp, A.J.F. (2015) On experimental en numerical analysis of combustion processes in a gas turbine for large civil planes.

Eilders, Leon (2012) Power curve uncertainty analysis.

Eisma, T. (2016) Pass by noise simulation.

Elawady, Karim (2017) Compressor pipeline wall temperature analysis during depressurization including condensation effects.

Eller, Tom (2011) Optimization of bag forming machine c20.

Engels, R.A. (2012) Internship on indirect measurement of track decay rate and combined roughness.

Engler Faleiros, D. (2015) Wind tunnel Investigation on Trailing Edge Noise Mitigation via Sawtooth Serrations.

Ergül, Bayram (2010) Innovatie in palletising.

Eshuis, S.G. (2014) The jumpmeter.

Ettema, Bart Robbert (2018) Experimental Determination and Validation of Pressure Through a Porous Medium.

Evertzen, Luc (2018) The aerodynamic design of RED Shift : Solar Team Twente’s 7th solar car.

Faneker, Tom (2010) Item availability restricted.

Fang, R. (2017) The application of the ISO55000 improvement loop & the improvement of maintenance concepts at Strukton Rail.

Ferreira Nascimento, Leonardo Teodoro (2017) Synthesis optimization of energy systems maximizing regional profit.

Fierkens, R.I.K. (2014) Mirror system for hand orthoses.

Flanderijn, S. (2016) Developing a dynamic model of a pyrolysis plant for an operator training simulator.

Gaete Haller, P.J. (2017) Data Analysis for installed PV Systems in the Netherlands.

Ganseij, M. (2018) Item availability restricted.

Geerligs, H. (2016) Techniques for in-flame measurements.

Gelderblom, G. (2012) Head on collision of a vortex ring and a heated wall.

Gemerts, Earvin (2017) Item availability restricted.

Gerritsen, J. (2018) Item availability restricted.

Gijsman, F. (2014) Tonal generation by an airfoil at low to moderate Reynolds numbers.

Gooijer, B.M. de (2014) Project FIX-IT Falkenberg.

Goossens, M. (2015) Modeling a vapor compression cycle : report internship Aeronamic.

Gorter, Douwe (2012) Optimization of RFID tracking system and other warehouse processes.

Grift, E.J. (2012) Predicting scattering of acoustic modes in an annular duct subject to non-uniform flow: an analytical and numerical approach.

Groen, B.J.H. (2016) Internship Nedcon.

Groendijk, H.A. (2016) Ultrashort laser processing of glass : cutting and micro surface structuring of soda-lime glass.

Groeneveld, G. (2017) Design of vacuum components for FERP-technique characterization system.

Groot, N.D. de (2017) Part 1: “Arc welding standard for production & quality inspection” Part 2: “Implementing the principles of lean in a productive classroom”.

Groot, W.L.C. (2014) Specimen design for characterisation of failure in cast aluminium.

Gudde, J. (2012) Manure digestate combustion for decentralized energy production : research about the feasibility of the manure digestate combustion processing route.

Gunnink, K.J. (2012) Design of bagmaking equipment.

Haan, Sven de (2018) Possibilities of performance and condition monitoring at Rijkswaterstaat : Internship report.

Haar, D. ter (2016) Design of droplet impingement measurement set -up.

Haar, MF.A. (2011) Aero-engine emission and altitude relight test : placement at Rolls Royce Plc-Combustion and Casings, United Kingdom.

Haas, Eddy de (2010) University of Louisville Hospital Emergency Department Simulation, how to improve patient satisfaction and increase ED's revenue.

Hadisaputro, Yosia Giovanni (2016) Combination of Phase Change Material with concrete for foundation uses.

Hagen, J.A. (2012) Implementation of a target time calculation module at VDL ETG Suzhou.

Hagen, Jeffrey (2011) Hydrogen Recovery from UCG Gas: experimental data of hydrogen separation from UCG gas using a polymer membrane.

Haitsma, O. (2015) Flexible packaging engineering.

Hanoun Saado, A. (2017) Storage prognosis of large components during the peak period at Siemens Hengelo.

Hanselman, S.J. (2014) An investigation into the formability of advanced high strength steels in roll forming.

Hart, K. 't (2016) An investigation to find the optimal maintenance interval for escalators based on their usage.

Hartjes, P.C. (2016) Design case : composite sensor module.

Haspels, M. (2014) Testing a technique to generate low-frequency large-scale turbulence with the Wall of Wind : an experimental study.

Haverkate, R.W.M. (2015) Verloren was method : stageverslag in het kader van production management.

Hazel, B. van den (2015) IMPACT MECHANICS OF HELMET COMPONENTS.

Hees, N. van (2018) Development of a functional thumb orthosis for boys with Duchenne Muscular Dystrophy at Hankamp Rehab.

Heide, S.O. van der (2016) On the design of a water temperature control module for bulk solids heat exchangers.

Heijdens, E.J.H. (2015) Internship report Huisman.

Heijs, J.A.N. (2018) Material overview and documentation update, with identification of elimination candidates.

Hekker, A.S. (2015) Internship Report - Meshing SGT 4000F Hybrid Burner.

Hekman, T. (2016) Building an active noise control demonstrator.

Hengstum, Q.T. van (2013) Implementation of a BIPV plant at Centro de Tecnologia Informação Renato Archer.

Herbrink, J.M. (2014) Instandhoudinsprogramma Walrusklasse.

Herpen, Noud van (2018) Assessment of substitutive vibrotactile feedback for performing object manipulation task with prosthetics.

Heutinck, L. (2012) Rekenmodel ten behoeve van nokmechanismen.

Hoek, L.S. (2014) Replacement of glued on components on wind turbine blades.

Hoorn, H-J. van den (2012) Internship report: report of a three month internship at the Centre for Design at the RMIT University in Melbourne, as part of the master program mechanical engineering (15 EC).

Horst, A. van der (2015) Life cycle analysis of non return valves.

Hove, Christiaan ten (2010) Item availability restricted.

Huiberts, J. (2015) Stability of the bubble cushion during contactless boiling in micro-evaporators.

Hul, J.F. van 't (2012) Internship report PEER Africa.

Hutten, J.W.H. (2011) Item availability restricted.

Huttenhuis, J.A.J. (2013) Stageverslag Masévon.

Jansen, W. (2011) Design and implementation of a startup simulation program for direct fired boilers.

Jansen van Rosendaal, N A (2016) 2D Quench propagation modelling in COMSOL.

Jin, H. (2015) Use the laser engraving machines to achieve laser cleaning, laser post-melting and roughness control of the anilox rolls.

Jindelt, T. van (2015) Automated mesh generation for the rotator section of a radial inflow turbine.

Jong, R. de (2015) Improving a traction winch drum design engineering calculation.

Kalas, V.J. (2016) Assesment of influence of play in joints on the end effector accurcay in a novel 3DOF (1T-2R) parallel manipulator.

Kamermans, M. (2018) Short time degradation of thermoplastic composites during stamp forming.

Kamphuis, A. (2016) Internship as Trainee Patent Attorney.

Kamphuis, L.R. (2014) Active feedback acoustic noise control.

Karaliolios, E.C.J. (2017) Energy modelling analysis of Heffron Hall.

Kehayan, M. (2018) TICC : A CNC calculation tool.

Keizer, R. (2018) Item availability restricted.

Kerssens, P (2016) Laser-induced cavitation in acoustically levitated droplets.

Kesete, M.M. (2010) Electrode design : internship report.

Kevelam, J.H. (2010) Stageverslag Huisman Equipment BV.

Kishore, R. (2016) Photoelectrochemical Water Splitting Using Metal Oxides.

Klein, H.D.T. (2016) Evaluation of the use of deconvolution algorithms for determination of trailing edge noise levels.

Kleissen, R. (2018) Increasing tolerances of the body panel fit on a hybrid chassis.

Klompe, A.J. (2016) Multitooltrac rowcrop 80, op zoek naar een nieuwe toepassing.

Klooster, S. (2016) SGT-600 Lube Oil System Simulation.

Klunder, W.J.A. (2010) Werking van lijnbranders.

Knaap, Bart van der (2017) Virtual testing, strain correlation for loads optimization of composite fuselage structure.

Knepper, K.M. (2013) Numerical predictions of acoustic performance of folded cavity liners for turbofan engine intakes.

Kok, K.R. (2014) The design of falling film evaporators.

Kolkman, D. (2017) Validation of a Reynolds number correction method.

Kooi, Freark van der (2010) Musculoskeletal analysis of light postural movements during sitting : a pilot study about the effect of light postural movements during sitting on the muscle activity in the back.

Kooiman, A. (2014) An analysis of some aerodynamic effects in Horizontal Axis Wind Turbines.

Kooistra, R.L. (2011) PLEGO : redesign of the PWR-Pack delta robot frame for increased modularity and better overall performance.

Koopman, Frederik (2018) Design of a Matlab based graphical user interface for visualization and enhancement of floor dynamics.

Korbee, W. (2017) Mattress Loading plan generator.

Kroes, R.F. (2013) Crude oil-water flow in horizontal pipes.

Kroezen, R. (2015) Analysis Customer Support at 'payleven'.

Kruijk, T.R. (2015) Influence of aileron oscillation and gap size on aerodynamic control derivatives.

Kuin, R.W.J. (2013) Aerodynamic analysis for control and simulation of unmanned aerial vehicles.

Kuipers, N.J.A. (2012) Carbon footprint TS5 post cage.

Kuipers, P. (2016) Test analysis report :improving finger simulator & plethysmograph filtering for nano core.

Kurylek, R. (2017) Measuring the acoustic properties of rocket engine faceplate configurations DLR-LA-HF-RP-086.

Käo, S. (2014) Designing, Building and Testing a Wave Energy Converter with Control System.

Käser, R.H. (2015) Flamelet Generated Manifold in ANSYS Fluent and ANSYS Workbench CFD Automation and Optimization.

Labee, R. (2015) Design and realization of composite molds for a solar car.

Lamboo, S. (2015) Grid importing for CFD simulations of turbomachines.

Lammers, K.H. (2015) Aerodynamic CFD analysis on experimental airplane.

Lammers, Marcel (2018) Item availability restricted.

Laméris, Mark N. (2018) Off the grid : Micro Hydro Power.

Landriscina, Giovanni (2018) High lift noise reduction with carbon nanotubes thermophones.

Lange, M. de (2018) Item availability restricted.

Lassche, T.H. (2017) Internship Brink Group B.V.

Lassche, T.J. (2015) Research into compliant bistable mechanisms with the application in the design of an easy-chair.

Lei, L.H. (2017) Numerical modelling of non-linear shallow water waves.

Leijtens, N (2016) Design of an Energy Storage System for Pacific Islands.

Lerink, C.W. (2017) Extension of the Eilmer4 Gas Package.

Liefers, R.J. (2016) Internship at quality management of electrical drivetrains and special engines at the BMW Group in München.

Ligtenbelt, Emma (2012) Item availability restricted.

Linden, S. van der (2015) Numerically modelling artificial surfing waves in a circular wave pool.

Linschoten, D. (2017) Item availability restricted.

Lith, L.D. van (2016) Functionalization of Poly-(ethylene glycol)- diacrylate (PEGda) with different molecular mass using Two-Photon-Polymerisation.

Liu, Xin (2011) Item availability restricted.

Lotlikar, A. (2019) Design of a modular display trolley.

Louter, V.M. (2016) Development of a method to compensate for non-circular pipes for cutting devices.

Lubbers, R.G.J. (2015) Design of an automated blade coater & d esign of a gas mixer for a CVD system.

Luo, Y. (2016) Concept design of tracked stinger roller box.

Láoh, T.A. (2015) Numerical simulation of ice accretion on a propeller blade.

Maag, S. de (2017) Validation of Eilmer4 for impinging shock interactions.

Maas, B.J. (2014) Numerically solving the sound transmission in the intake of a turbofan engine with non-axisymmetric lining.

Madhar, M.C. (2015) Thermal validations of the linear actuator at VDL-ETG.

Meer, J.N. van der (2017) Project Evaluatie. Stage Rapport TCPM.

Meer, T.J. van der (2013) Implementation of acoustic boundary element method for the purpose of beamforming.

Meijvogel, D.T. (2016) De structuur van het innovatiesysteem van BIPV.

Mertens, R. (2015) Feasibility research: Design of a mini-Tension Leg Platform foundation for a 6MW Wind Turbine.

Miedema, Rob Acronius (2010) Improve motion capturing by using a movie camera and new markers : report internship.

Mil, K. van (2015) Internship at the Royal Grolsch.

Mimikos, N. (2014) Fast pyrolysis product distribution for residual biomass streams.

Minnema, A. (2010) Designing a low frequency sound source.

Molder, D A M te (2016) Condition monitoring and testing of piezo elements for the activation of guided Lamb waves & damage identification using ultrasound scanning.

Molenkamp, D.J. (2016) The off-design performance prediction of centrifugal compressors.

Moonen, Reinier (2011) External project : improving the overall equipment effectiveness of a line by an increased accessibility of product outfeed areas.

Moran, Javier (2011) Global cumulative installed photovoltaic capacity, solar home systems and mini-­‐grids.

Morren, Robin (2011) Item availability restricted.

Morsche, Niek te (2011) Report on the design study of a new semi-mounted reversible plough.

Mourits, G.J. (2014) BEM theory and CFD for wind turbine aerodynamics.

Mulder, L. (2017) LAT100 Resonance investigation.

Nauta, H. (2015) Means and methods for modal building analysis.

Naves, M. (2015) Design of a continuously variable transmission for efficiently actuating walking robotic sensors.

Nesselaar, A. (2018) Development of a system to measure the skin temperature of the feet at the University of Calgary.

Nguyen, M.D. (2017) CFD Feasibility of oil flow around a bearing ball-raceway contact with Star-CCM+©.

Nijenhuis, M. (2013) Measuring pilot-affected safety of flight.

Nijenhuis, Nienke (2018) Developing a method to help engineers find solutions from nature and technology within the TRIZ method.

Nijensteen, G.A. (2017) Item availability restricted.

Nijhof, Daniël (2018) Data Acquisition and Control of the Combustion Test Cell.

Nijland, L.K. (2016) Internship Nakilat Damen Shipyards Qatar.

Niskhi, Walelign Messele (2011) Item availability restricted.

Noord, N. van (2016) Assisting the management team of Frijns Structural Steel in order to develop a tool to gain more control over the projects and the production in the company.

Norde, E. (2012) Effect of steady flow distortion on modes propagating in a turbofan intake duct.

Offringa, Wietse (2012) Thermo-hydraulic joint model with typical pf joint parameters as exemplary input (TeST-Joint).

Oldeboer, A.J. (2013) Analyse van de centrale airco-installatie op de Universiteit van de Nederlandse Antillen.

Olimulder, R.J. (2015) Low flow, high head.

Ooms, B.R.J. (2016) Design of Flexible connection system elements and damage inspection of Slingbuoy 2.0.

Ooms, E.M.J. (2016) Optimization and redesign of actuators for a medical device.

Oosten, M. van (2015) Composite : Metal connections for the automotive industry.

Oosterhuis, Hanne (2018) Item availability restricted.

Oosterhuis, Joris (2010) Burner optimisation for a boiler with controlled combustion.

Op 't Ende, W. (2018) Writing a proposal for the EU's Horizon 2020 program in the field of medical non-adherence.

Otjens, T.C. (2017) Effectiveness improvement of Nelson Pine MDF sawing machine.

Otter, R.A. (2016) Dynamical analysis of amusement rides.

Oude Luttikhuis, Bart (2011) Internship at Dr. Ing. H.C.F. Porsche AG.

Overmars, K. (2019) Modelling of water wave propagation with FUNWAVE-TVD.

Pander, Renate (2010) Praktikumsbericht zum Thema : analyse zweier Berechnungsmethoden zur Auswertung der Indizierung und Berechnung von Motorprozessen.

Pas, S. ten (2016) The influence of y+ in wall functions applied in ship viscous flows.

Pegels, K.J.R. (2014) Solar energy in Indonesia : an internship report on solar water heaters and sustainable energy technologies in the area of Bandung.

Perea Almenar, J .V. (2017) Evaluation and analysis of a new alloy for element material in CVT.

Pierik, Rens (2017) Item availability restricted.

Pijper, C.C. de (2016) Improving the microfirm concept.

Pilagkas, Christos (2012) Activity classification using a hip worn inertial sensor.

Plat, M.A. (2009) Designing a boiler start up program.

Platenkamp, Niels (2012) Item availability restricted.

Plegt, Teun (2011) Model based systems engineering in warehouse design : automatic report generation from SysML models.

Plender, J.B. (2016) Internship at Flanders' Bike valley.

Ploeg, M. (2010) EMS- & Hospital-Cluster determination with Linear Programming.

Pocorni, Jetro K. (2011) Influence of airflow on weld depth obtained with fiber laser.

Poppelen, Maarten van (2018) Mini-traineeship internship at Damen Shipyards.

Porte, E.M. (2014) An experimental investigation into the behaviour of bidisperse granular avalanches.

Post, F. (2017) Certification of a small wind turbine.

Prosjkin, Slavik (2012) Stageverslag: Ter land, ter zee en in de lucht.

Puttkammer, P.P. (2015) Sound transmission in turbomachinery flow ducts.

Raghunatha Reddy, V. (2018) Supersonic expansion of liquid and gaseous carbon dioxide.

Raghunatha Reddy, Vatsala (2018) Supersonic Expansion of Liquid and Gaseous Carbon Dioxide.

Rajanna, S. (2019) Item availability restricted.

Rakuša, Anej (2017) Go 400 & Energize.

Reekers, F.A.D. (2015) Implementation planning in manufacturing company.

Reichardt, J.M. (2015) Internship Report Jasper Reichardt.

Reijmer, J.G.J. (2016) Calculating the overpressure in a tyre cavity due to tyre movement and compression.

Reimert, A.T.L. (2014) Reduction of support structures.

Rensen, Quinten (2017) Item availability restricted.

Ridder, L. van de (2010) Lean Burn Improvements : Placement Rolls-Royce 2010.

Ridderhof, C.P.J. (2016) KnowledgeManagement System Pilot Exploration of knowledge management.

Rietema, M.J. (2013) Design of a solar sand printer.

Rijkers, Haiko (2011) Rotating the mesh near the boundaries.

Rindt, Felicia (2018) Assessing the Carbon Footprint of RARCC and Papua Diving in Raja Ampat, Indonesia.

Roethof, Thijs (2012) Assistance to Technical Department South East Asia.

Roke, H.D. (2015) Installation of a Tendon Leg Platform Offshore.

Rolff, G.J.M. (2016) Item availability restricted.

Roodink, T. (2016) Literature review on stabilizing high speed valve- and drivetrain concepts for racing applications.

Roos, L.W.M (2013) Comparison of local methods to detect vorticity in RANS simulations of the flow in the wake of a marine propeller.

Roosjen, Sander (2012) Internship report Cambodia : an evaluation of working 7 months for a solar energy company in a 3rd world developing country.

Roozing, G. (2015) Design of Planetary System to resolve film thickness variation in Film Deposition.

Rozeman, S. (2014) CFD study on performance of a D.B.D. Plasma Actuated airfoil in an ultra-low Reynolds number flow.

Ruiten, E.P.N. van (2011) Stageverslag Orange Plastics.

Ruiter, Floris de (2010) Item availability restricted.

Rustamov, Bahram (2011) Internship report.

Rutgers, J (2016) Dynamic modeling of a heat exchanger.

Sanders, R.V. (2016) Modelling and simulation of traditional hydraulic heave compensation systems.

Schakel, E.J. (2016) Investigation of the Coffee Grinding Process.

Schasfoort, K.B. (2017) Temporary fixation using vacuum for the Total Epicardial Delivery Device (TEDD).

Scheper, B.J. (2016) Simulating mixing machines using MercuryDPM.

Schilder, J.P. (2011) Roller coaster dynamics and passenger comfort assessment : internship report.

Schimmel, N. (2016) Measurements and control of mould oscillation during continuous casting of steel.

Schiphorst, Frank (2011) Internship report : pressure sensor with integrated temperature function.

Schipper, E. (2014) Integration of a vision system with a MOTOMAN HP3 robot system at the Universidad Autónoma de San Luis Potosí.

Scholten, W. (2015) Evaluation of handling of trucks.

Schonenberg, W. (2015) Improving the HUMS capabilities of an EC225 Helicopter by training a model for automatic failure detection of an oil cooler fan shaft.

Schonewille, R. (2016) Analysis of tram wheel wear at RET.

Schoo, E.H. (2015) Opzetten van een begrotingsprogramma voor hout-gestookte warmtekrachtkoppelingen in Excel.

Schot, T.M. (2015) Using sea turtle biomimetics for increasing swimming efficiency in humans.

Schuerink, G.A. (2012) Bundled reports : Automated lubrication system for machining centres : Effect of nozzle accuracy and fluid amount on lubrication properties : Conceptual solution to large swarf build-up in miling of large rings.

Schuttert, M. (2017) Camera, PLC and servomotor control.

Schuurman, M. (2015) Analysis and redesign of the electric driven clamping mechanism of Stork Injection Moulding Machines.

Sedee, K.M.J. (2016) Key Performance Indicators.

Siddiqui, M.Z. (2017) 3D Printing : depowdering techniques.

Siemons, S.K. (2015) Aerodynamic interaction between wing and truss in transonic flow.

Siepman, D.C. (2016) Automation of the post-processing procedure of numerical modal tyre vibration analyses.

Sinha, A. (2016) Optimization of warehouse processes & automation of packing line.

Slaper, A.R. (2015) Numerical Simulation over a backward facing step with OpenFOAM.

Sligman, M. (2011) Stageverslag naar aanleiding van de volgende opdrachten: analyse bestaande breedstrooiende stalmestverspreider, ntwikkeling nieuwe verlengde achterklep en ontwikkeling nieuwe veiligheidsbumper voor de Deense markt.

Slomp, M. (2012) Deformation of multi-layer printed circuit boards - Usage of the classical lamination theory for modelling PCB deformation.

Slot, J.J. (2016) Design of a human-powered juicer device.

Smit, H.J. (2018) Item availability restricted.

Smit, Stefan (2017) Item availability restricted.

Spanjer, S.A.J. (2011) Accuracy analysis of the 2200evo.

Stelma, T. (2010) Thermal modeling of the tape placement process.

Stijlaart, E. (2016) Effects of Disalignments in C/PPS laminates : a study on a possible method to predict warpage induced by disalignments.

Stoutmeijer, K. (2015) The influence of slugs on pipe supports : improving the design parameters for Caesar II.

Straalen, Y.J. van (2011) Item availability restricted.

Straathof, N.M. (2012) Incident photon-to-current efficiency measurement system.

Strijdveen, G.W.J. (2012) Improving the efficiency of a Stirling Engine by changing the external fins on the hot side of the engine.

Strijdveen, M.M.A. (2016) Strength assessment of bolted connections : the effect of geometric non linearity and stress stiffening on bolt stresses.

Suyanti Hersanto, Suyanti (2018) Item availability restricted.

Swinkels, Koen (2011) Item availability restricted.

Tan, D. (2018) Item availability restricted.

Tan, D.J. (2015) Modelling Pilot Pitch Control : analysis of human-in-the-loop dynamics from a control theory perspective.

Tanuhardja, C.C. (2015) Capacity planning.

Terpstra, J. (2015) Modeling a two-phase mechanically pumped loop.

Teunis, G.E. (2014) Analysis of a generic lifting table.

Timmer, M.A.G. (2014) Modelling framework for a low-grade heat thermofluidic oscillator : the Evaporative Reciprocating Piston Engine.

Timmer Arends, J.H. (2016) Design of a dynamic weigh system for conveyors.

Timmerman, M. (2016) Characterizing GCLAD as a non-contact detector for biomedical applications.

Titus, S.S. (2015) The implementation of the Arbitrary Lagrangian Eulerian method into a FEM - Discontinues Galerkin Solver.

Trijselaar, Alex (2011) Item availability restricted.

Trinh, D.H. (2011) Vehicle parameter estimation using GNSS and standard ESC sensors.

Ubaydullaev, Bakhtiyor (2010) Feasability study for the university of Twente campus closed water cycle : feasibility study for use of sustainable energy from wastewater sludge and possibilities of wastewater sludge reuse.

Vaithiyanathasamy, R. (2017) CFD analysis of 2D and 3D airfoils using open source solver SU2.

Vandeursen, B. (2016) Mechanical design of a whole house ventilation unit.

Ved, M.M.M. (2015) Evaluation of the Valve-less Flooding System & Re-design of Hot Stab Guiding System.

Veenstra, S.W.P. (2018) Item availability restricted.

Velde, R.J. van der (2012) Fatigue analysis on a chain-link of a continuously variable transmission.

Veldhuis, Mark (2010) Item availability restricted.

Velten, R.H.E. (2018) Item availability restricted.

Vendrig, W.H.P. (2012) Internship Report Heerema Marine Contractors Leiden.

Venterink, M. (2015) Analysis and redesign of the rotating shut-off nozzle of Stork Injection Moulding Machines.

Verboom, A. (2018) Item availability restricted.

Versteegh, M.P.M. (2015) Concept en model ontwikkelen welke in staat is om uitwerpselen automatisch op te ruimen.

Verweij, A.P. (2010) An investigation in actuator disc CFD solution applicabillity for aeroacoustic analysis of propellers and rotors.

Veugelers, Manuel (2018) Design and validation of clamping system for Wire and Arc Additive Manufacturing.

Vikram Ramesh, V. (2016) Wear of polymers : precision trimmer.

Visser, J. (2012) Modellering van het effect van een Friction Modifier op booggeluid.

Vluttert, N. (2017) Item availability restricted.

Voortwis, Ate te (2012) High performance data analysis for micro-maqcro transition in large-scale DEM simulations.

Vos, Ids de (2018) Item availability restricted.

Vries, W. de (2015) High order regularization of Dirac-delta sources in two space dimensions.

Vries, W. de (2015) Development of a fuel balance application.

Vu, L.D.K. (2015) Optimization measurement campaign.

Wedzinga, N.A. (2015) Design and testing of a 6 inch control Valve with a Multi-stage Anti-cavitation trim.

Weersink, Ruud (2010) Experimental study of the oscillatory interaction between two free opposed turbulent round jets.

Weitkamp, Sander (2011) Study on the flow of water at the bodywork = estudio sobre recorrido de agua en carroceria.

Westenberg, A.J.C. (2015) Internship Report – University California Davis.

Widjanarko, Stephanus M.D. (2010) Internship Vestas Wind system A/S : steady blade element momentum code for wind turbine design validation tool.

Wieringen, Maxim van (2018) Efficient repurposing of 2nd life EV Lithium-Ion batteries to speed up the energy transition to affordable renewable energy storage in social housing.

Wiggers, Jochem (2011) Item availability restricted.

Wijk, C.F.C. van (2019) Numerical Simulation on Interface Instability under Reshock.

Wijk, R.F.O van (2019) Thermodynamic Optimization of Organic Rankine Cycles for Co-Generation from Low Enthalpy Ultra-Deep Geothermal Reservoirs.

Wijlens, J. (2011) Bemestingstechniek: stageverslag over de technische kant van mesttanks en bemesters.

Wijmans, Nora (2019) Effective laundry : a design engineering approach for laundry systems in small, off-grid, sustainably minded communities.

Wilk, F. van der (2017) Item availability restricted.

Will, J.B. (2016) An experimental study of heat transfer and flow dynamics in a multi-layer Rayleigh-Bénard convection cell.

Wilmink, D.G. (2015) Theoretical and experimental investigations into magnetic levitation systems.

Wilmink, J.H. (2012) Item availability restricted.

Windt, A. van der (2016) Pre-assessment tool for achieving Net Zero energy in New Zealand schools.

Windt, Lennart van der (2017) CFD icing analysis steps on a three dimensional, swept, tapered and twisted wing.

Wissink, B.W. (2016) Regularizing discontinuities based on filtering using dirac delta kernels.

Wittenberg, Wilco (2011) VarStiff: bending modulus : prediction models and experiments.

Woord, H. ter (2018) Modeling the pressure drop in pipelines transporting highly vicous non-newtonian sludge.

Woudstra, J.A. (2011) Economival potential for the implementation of photovoltaic solar systems in Chile.

Zande, M.R. van de (2015) Back contact modules in PhotoVoltaic Thermal (PVT) applications.

Zeekant, Erwin (2011) Lagrangian coherent structures of accumulating inertial particles in vortex flow on a disk.

Zhang, J. (2017) Actions towards decarbonization : modelling in climate change policies.

Ziggers, J. (2012) The design and testing of a unique prosthetic attachment at the University of Adelaide.

Zuiderduin, Ewout R. (2018) The designing process of a long distance steam transport system.

Zuurveld, Jasper (2018) Analysis of the ventilation system.

Zwijnenberg, Jurjen (2012) Securyfence : De ontwikkeling van een zetbank voor de productie van et Securyfence hekwerk.

Özcan, Evren (2011) Theoretical modelling of Philips bubble pump behaviour.