University of Twente Student Theses

Login

Domain: 50 technical science in general

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Year | Item Type
Jump to: 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2010 | 2009 | 2008
Number of items: 1686.

2024

Aalst, Joëlle E. van (2024) Reliability of Uncertainty for Assessing the generalisability of Deep Learning Segmentation for Head and Neck Organs at Risk.

Algra, R.A. (2024) Designing Tangible Interactive Technologies for Promoting Physical Activity at the Office.

Ali, Ahmed (2024) Assessment of the trajectory control performance on the Omnimorph, an omnidirectional morphing multirotor UAV.

Andrei, Luca (2024) Test Quest : Improving the onboarding experience for novice Dungeons and Dragons players through personalised AI-generated content.

Andreoli, D.S. (2024) Proteome secretion analysis from PCa cell lines using optical and electrochemical measuring methods.

Andreoli, D.S. (2024) Proteome secretion analysis from PCa cell lines using optical and electrochemical measuring methods.

Anthonijsz, Carmen Derya and Conijn, Mats Harmen and Lam, Marlène 't and Vreese, Jorrit de (2024) A standardized workflow for qualitative 3D models for patients who qualify for RAPN.

Aponte Urmeneta, J.M. (2024) Multitone Measurements for the Characterization of EMI Filters at High Power Levels.

Arts, BSc L.A.P. (2024) Continuous transcutaneous diaphragmatic electromyography measurements in preterm infants.

Arts, Tim H.A. (2024) Design of a front seat for the Buddy tandem tricycle through user empathizing. A conceptual design for a specific target user in a specific context of a new bicycle design.

Aursulesei, Andrei (2024) Stability Analysis of Power Transfer Using Droop Control in Electric Aircraft Propulsion Systems.

Azampanah, Kimmia (2024) A digital twin for cardiac monitoring : In patients undergoing venoarterial extracorporeal membrane oxygenation.

Bac, M.J. (2024) Control of a Pneumatically Driven Robot Arm and the Design of a Modular Motor Controller.

Baeten, Kim and Bouma, Ward and Goeij, Femke de (2024) Voorspellers van de opnameduur in de geriatrische revalidatiezorg bij ouderen met een heupfractuur bepalen door middel van continue monitoring van fysieke activiteit met een MOX-sensor.

Bakker, M.A. (2024) Preventive maintenance policy Nuts Packaging line D028.

Bakker, Pascal (2024) Automating the Cybersecurity Triage Process : A Comparative Study on the Performance of Large Language Models.

Berg, L.J.J. van den (2024) Advancing Bihormonal Closed-Loop Systems: The Role of Glucagon in Glucose Management of Diabetes Mellitus Type 1.

Berg, Sander Constantijn Bijn van den (2024) Predicting the Credit Risk Classification of Retail clients at Rabobank.

Bergsma, V.D.C. (2024) Control and Force Sensing for a DIY at Home Telemanipulation Setup.

Bettonvil, L.M. (2024) Improving the Service Process using Simulated Annealing at Company X.

Bie, J.A. de (2024) Performance and Computational Complexity of Wideband Sound Source Localization Algorithms : A Comprehensive Analysis.

Blauw, Robert (2024) Accelerating Offshore Wind-to-Hydrogen Energy Systems in the Netherlands : A Technological Innovation System Analysis.

Boelens, Boelo (2024) Optimization of Nucleofection protocol for LX-2 cell line.

Boer, M.C.J. de (2024) Characterization of Frequency and Flow Response of Magnetically Actuated Swimming Millirobots with Asymmetric Helical Body.

Bonhof, Linde (2024) Kwalitatief onderzoek naar belemmerende en bevorderende factoren voor het gebruik van een thuismonitoring app in het zorgproces van patiënten met chronisch hartfalen.

Boon, V.S. (2024) The Only Way Is Up : Active knee exoskeleton reduces muscular effort in quadriceps during weighted stair ascent.

Botz, Patrick (2024) EasyJam : Music for Everybody (designing intimate technologies).

Boxel, N. van (2024) An optimisation approach to schedule CNC machines with pallet handling system.

Braaksma, Ashley (2024) Developing a Tangible Interactive Game to Improve Reminiscence among People with Alzheimer’s Disease.

Branderhorst, G.J.H.J. (2024) Automatic characterization of a DC motor.

Brekel, Joris van den (2024) Dashboards for increased insight into laser cladding : Advancing data collection and visualisation to increase insight into the laser cladding process at Van Halteren Technologies.

Breugelmans, R.M. (2024) The implementation of autonomous agents into aircraft turnaround operations: a wheel chock robot case study.

Broeze, G.M. (2024) Near InfraRed Spectroscopy : A Tool for the Diagnosis of Chronic Limb-Threatening Ischemia.

Brouwer, S.E.P.G. and Loomans, S.G.A. and Ron, J.I. (2024) Monitoring preterm infants : how should monitoring data be interpreted?

Bruin, Irene de (2024) Eerste aanzet voor een Health Technology Assessment (HTA) raamwerk voor medische Artificial Intelligence (AI) : een kwalitatieve en kwantitatieve aanpak.

Bui, Thai Ha (2024) A minimal nanoneuron capable of nonlinear classification.

Burgstede, W.Y. (2024) Developing a Rapid Prototyping kit For the Design of Creative Technology for Sports and Movement.

Calvino Sobrido, Raul (2024) Solving an order acceptance sequential decision-making problem with Q-learning.

Cardol, P.D. (2024) Improving registration for travelling hours.

Cassee, N.C.E. and Kuij, M.L. van der and Oosterink, L. and Versteeg, E.M. (2024) Virtuele herleiding van geresecteerde neuroblastoomdelen via genavigeerde resectie ter validatie van preoperatieve risicomodellen.

Chang, J.A. (2024) Mixed Traffic Solutions for Automated Hub-to-Hub Logistics.

Chen, G. (2024) Serious Game Prototype for mapping Greenhouse Data to the Semantic Sensor Network Ontology.

Chin-A-Kwie, T.L. (2024) Interaction with the Smart Interactive Mini Tables.

Cijffers, Carmen Julia (2024) Improving the Occupancy Rate in the Distribution Center by Developing a Material Handling System Optimization Approach.

Cyrkel, J.R. (2024) Extended Reality for User Validation in Product Development : coffee machine UI design, a case study.

D'Souza, C.D.D. (2024) Comparative Analysis of Dynamic Object Segmentation Networks for Tele-robotic Applications.

Dalen, E.M. van (2024) Prediction of post-induction hypotension using machine learning.

Dalen, K.J van (2024) Development and validation of a gasification model to investigate the effect of temperature reduction on increased syngas yield.

Dalenoord, F. (2024) Item availability restricted.

Damen, D. (2024) The power of play; Developing and evaluating a sensor enhanced plushie as an interaction tool to robot MiRo to improve and assess the wellbeing of post-operative children.

Das, Subhraneil (2024) Developing an end-to-end Indoor Localisation Scheme using Deep Learning Models and Inertial Odometry Techniques.

Davo Sainz, Jorge (2024) Breathing Life into Animatronics.

Delfos, L. (2024) Wearable interfaces in voice performance.

Dharmaputra, B.A. (2024) Multimodal Data Physicalization for Climate Change Communication : Exploration of Haptic and Auditory Modalities.

Dijkstra, Eddo (2024) Quantum and Military Communication Security : An Analysis of the Opportunities, Risks, Implementation Challenges, and Prospects of Quantum Computing in Military Communication.

Dik, Nienke (2024) Responsible energy consumption amongst university employees: Designing a behaviour change intervention.

Dinter, A.V.A. van (2024) Developing a Reminiscent VR Game to Enhance Cognitive Function and Well-Being for Older Individuals with Dementia.

Donker, Olivier (2024) Hardware prototyping and instrument design of raspberry pi-based microscopy for electronics and 3d print inspection.

Doornenbal, N.F. (2024) Providing Information for the implementation of hybrid learning in Dutch Pre-vocational secondary education.

Dorp, Y. van and Engelen, G. van and Hendriks, B. and Verberkt, M. (2024) Innovative treatment of Aspergillus infecting a lung cavity.

Drijver, C. den (2024) A Model for Simulation of the Neonatal Lymphatic Transport System Enhancing our understanding of the neonatal lymphatic (patho)physiology.

Eijkholt, S.M. (2024) Developing a Labour Cost Prediction Algorithm for an Industrial Packaging Configurator.

Elgebily, Mostafa (2024) Estimation of liver respiratory-induced motion using an infrared camera for minimally invasive surgery.

Enescu, Cristian-Radu (2024) Improving visibility of inventory risk at Company X.

Es, B.C. van (2024) Leveraging AI for Adaptive Business Strategy: Analyzing the Role of Technical and Business Applications across Departments.

Ezendam, E.L. (2024) Correcting sagittal balance : Design and validation of a novel osteotomy concept with a patient-specific fixation system.

Fimbres Ramirez, Roy (2024) Sensorization of Lower Limb Socket for Real-Time Pressure Monitoring.

Franke, Myrthe (2024) The feasibility of virtual reality as exercise therapy for axial spondyloarthritis in a home and a physiotherapy setting (a mixed method study, from a multi-disciplinary perspective).

Fromm, Oskar Johannes (2024) The Impact of Digital Product Passports on Consumer Behavior in the Electronics Industry.

Gaag, N. van der (2024) Inertial parameter identification of bipedal systems : a simulation-based comparison.

Galama, N. (2024) Cost Optimization for Rejected Kegs at the Keg Line at Grolsch.

Gerhardus, R.J. (2024) Forecasting Demand within the Chemical Industry : A comparison of machine learning and traditional forecasting models.

Gerritsen, Lennart (2024) Assessment of a single-compartment mathematical model for alpha-motoneuron adaptations following spinal cord injury.

Geurtsen, A.E (2024) Optimizing the design of a dynamic cardiac phantom for MR guided intervention training.

Gierveld, Rozan (2024) A method for calculating the breast volume of lactating and non-lactating breasts using T1-weighted MRI scans.

Gilda, Timothy (2024) Monitoring of EMI Events in the Proximity of MRI Scanners.

Gkioka, Nafsika (2024) Battery Sizing Optimization for Grid-Tied PV Systems.

Goldmann, Sebastian Hendrikus (2024) Enhancing Credit Risk Prediction in Retail Banking: Integrating Time Series and Classical ML Algorithms.

Gorgan, Andrei-Victor (2024) Towards sustainable data centers: An analytical model of circular economy.

Graus, E.H.M. (2024) Nasal prosthesis design using Statistical Shape Modelling : Evaluation and development of a 3D Morphable Face Model.

Grgac, Robert (2024) Improving the warehouse picking process at Flaschenpost.

Gringhuis, M.J.H. (2024) Non-Contact Measurement of Heart Rate Independent of Skin Tone and Environment Light Using Near-Infrared Illumination.

Groot, N.T. de (2024) Feasibility of Infrared Reflective Marker Tracking for Nephron-Sparing Surgery Using Augmented Reality.

Gurp, S. van (2024) An Iterative Algorithm for Increasing Accuracy of a CNN-based Selective Sweep Detection Tool.

Harbers, Job (2024) Characterization and modeling of a thermal conductivity sensor for liquids.

Haren, S.L. van (2024) The effects of NR-TMS language mapping on brain activity using HD-EEG : from setup to analysis.

Harinck, M.F. (2024) SHAX-PC : Adapting XAI methodology SHAP for point cloud data.

Heijden, M.D. van der (2024) Immex, an immersive mixed reality concept for stroke rehabilitation exercises.

Heijink, J.J. (2024) Collision Avoidance for Trench Coupling using Photonic Probe-Chip Reflections.

Heiligenberg, J. van den (2024) The Assessment of Morphologic Bilateral Asymmetry in Knees with and without Trochlear Dysplasia.

Hester, BSc L. (2024) The dynamics of the infrarenal neck after endovascular aneurysm repair of infrarenal aortic aneurysms.

Hodes, M.N. (2024) Design and validation of a dynamic cardiac phantom for the training and advancing of iCMR procedures.

Hoek, Renée van den (2024) Development of More Sustainable Packaging for Acrylic Paints.

Hoogendijk Abril, Javier (2024) Online Battery State of Health Estimation Method using an H-Bridge and Bi-Directional Converter Circuit.

Hop, S. (2024) Pipe integrity and pipelay controller optimisation.

Hu, Dennis (2024) Design and Fabrication of a MEMS-Based Paramagnetic Oxygen Sensor.

Huisman, Sietze (2024) An demonstration device for electrical engineering.

Hulst, T.J. van der (2024) The Deformation of a SLM Porous Titanium printed Acetabular Implant.

Hutten, H. and Kruijs, B.W.H.J. van de and Riel, V.S.A. van and Stougie, A.T. (2024) Item availability restricted.

Ivanov, F.R. (2024) CodeQuizzer : Improving codebase understanding for code review via a gamified quiz taking system.

Jager, ir. K.E. de (2024) Assessment of a smart sensor to measure nocturnal erections.

Jansen, S.A. (2024) Immersion in Digital Nature : Exploring the Role of Skin Sensing as a Means of Simulating a Natural Environment.

Jansen, ir. Torben Harm (2024) Examining the Integration of Renewable Energy and Storage Technologies in Commercial Office Buildings: A Zilverling Case Study.

Jansen, Vera (2024) The influence of brand architecture on product development : Creating a brand architecture and subsequently developing a new product within the boundaries of a chosen brand architecture strategy.

Janssen, M.E.L. (2024) Initial development of a Python-based Graphical User Interface for a Medical measurement system for Nociceptive (mal)Function.

Jeuring, Jonathan (2024) Using everyday space as an interface for reducing Late-Night Snacking.

Jong, H. de (2024) Finger Vein Pattern Recognition Using a Contact Sensor.

Jongh, Luuc de (2024) Characterisation of holmium-165 micro-spheres in low-field MRI.

Kaldenbach, N.S. (2024) The Strategic Broadening of Organisational Expertise through Experiential Learning : A UX for XR Case Study.

Karlović, Fran (2024) Developing a Wearable Sensor Network for Air Pollution Monitoring on Construction Sites.

Kashif, Mohammad Umar (2024) Deploying Machine Learning Models on Resource Constrained Devices: A Case Study.

Kemper, Puck (2024) Designing Dynamic Digital Environmental Enrichment for Capuchin Monkeys.

Khawani, Aryan (2024) Human/Animal Activity Recognition Data Analysis - Classification and Identification.

Kienhuis, J.B.J. (2024) The Effects of the Distribution of Energy Storage Systems in Dutch Low-Voltage Grids.

Klein Koerkamp, Darryll (2024) Towards An Efficient and Standardized Warehouse Optimization Strategy : An Automated Performance Analysis Model.

Klep, Julian (2024) How To Design And Build A Penile Sensor Monitoring Nocturnal Erections To Aid In The Diagnosis Of Erectile Dysfunction?

Kloppenberg, J.B. (2024) Expanding VDL ETG Almelo’s supplier base in the Iberian Peninsula to enhance supply chain resilience.

Koch, T.F. (2024) Comparison of constrained optimisation methods for aerostructural design.

Koeleman, T. (2024) Optimizing the Scheduling Method for the Metal Plate Production Process.

Kok, H.G.T. (2024) Performance of dynamic lot sizing order policies : a case study on lumpy demand.

Koolwijk, R.J. van (2024) Designing an at-home wound monitoring device to address the needs of patients with diabetic feet and their healthcare providers.

Koopmans, S. (2024) Anticipating Key Technological Innovations in Maintenance Operations : Design and development of a technological impact model for the Royal Netherlands Army mechanic.

Koops, I.S. and Laar, A.H.S. van and Zaagsma, J. (2024) Eindsystolische Druk-Volume Relatie tijdens Positieve Drukbeademing.

Korporaal, L.A. (2024) Exploring the Usability and Acceptability of Generic Patient-Reported Outcome Measures at Medisch Spectrum Twente Hospital : A Qualitative Study Among Patients and Hospital Staff.

Kosters, S.W.L.G. (2024) Development of a Multi-Objective Resource-Constrained Scheduling Method for the Utility Construction Sector.

Kroeze, Daan (2024) On accelerated fatigue testing of elastomeric materials : The development of a new methodology.

Kuenen, Thom (2024) Data-Driven Gravity and Stiffness Compensation for a 4-DoF Upper Extremity Robotic Exoskeleton.

Kuijper, I.K. (2024) An Interactive Approach to MRI-based Interventional Navigation.

Kwon, Hyojoon (2024) Modelling of three-dimensional laser printing.

Laak, W. ter (2024) A Stochastic Bilevel Model to Study the Market Power of a Strategic Wind Power Producer in the Norwegian Auction-Based Intraday Market.

Lalande, L.L.M. (2024) Evaluation of TLS/SSL Implementations on Raspberry Pi for Secure IoT Communication.

Lamers, B.G.H. (2024) Optimize the Automated Storage and Retrieval System (AS/RS) of Vink Kunststoffen to improve warehouse efficiency.

Lan, B. (2024) Deep Learning-Based Interpretation And Analysis Of Ultrasound Raw Data.

Lange, Roos de (2024) The use of invasively-measured haemodynamics to assess paravalvular regurgitation during transcatheter aortic valve replacement.

Lemmens, L.F.P. (2024) Needle tissue interaction modelling for enhancement of feedback accuracy during biopsies.

Li, Dengyun (2024) How Real-World Objects Affect the Motor Skill Learning in VR.

Loh, Soenke van (2024) Quantitative EEG features related to the edge of criticality hypothesis and their predictive value of neurological outcome after coma.

Looms, T.J. (2024) Redesigning the warehouse and internal logistics at Scania Production Zwolle using discrete event simulation.

Maessen, C.D.G. (2024) Data quality analysis to support carbon foot printing.

Magar, Mrinal Bhalchandra (2024) Control Software Architecture for Power Wheelchair Navigation : A Step Towards Autonomy.

Manivannan, Ganavarshini (2024) Effect of Segmentation Parameters and Spatial Resolution in Segmentation Accuracy and Landscape Heterogeneity Indices derived from UAV Imagery.

Marót, Benedek (2024) Modeling battery cells with different chemistries based on EIS measurements.

Mastwijk, I.J. (2024) Optimizing the Preparation Stage at Kvadrat Shade : A Simulation Study.

Matena, D.H. (2024) Investigating Holarchies to Perform Capacity Allocation in Smart Grids.

Matijosius, Gustas (2024) Emotionally Intelligent Negotiation Agent.

Meer, Wendie van der (2024) Increasing the capacity of the consumer packaging lines of Europastry Oldenzaal.

Meijering, P.A. (2024) Multi-responsive multisegment shape memory polymer structure: a proof of concept.

Meulenbroek, Nils (2024) Transitioning to a counter-based maintenance strategy at the packaging filling lines of Heineken.

Michels, V.M.W. (2024) Development of detection algorithms for Morphological Uterus Sonographic Assessment (MUSA) features of adenomyosis.

Mijle Meijer, Joep K. van der (2024) Advancing Control Methods for Biohybrid Microrobots : A Focus on Vertical Rolling Locomotion.

Mulder, I. (2024) Towards a Radiation-Free Approach to Reconstructive Surgery Planning in Head and Neck Surgery : Evaluation of the use of MRI-based 3D models for the pre-operative planning of reconstructive surgery using perforator flaps.

Mulders, E. (2024) Analysis of Breast Physiology During Milk Extraction Measured With Diffuse Optical Spectroscopy.

Mylavarapu Naga, Adithya (2024) Safety Metric for Human-Aerial Robot Collaboration in Presence of Aerodynamic Disturbances.

Mäkelä, Erika (2024) Optimizing inventory management incorporating delivery demand uncertainty at Turff.

Naastepad, Julia C.J. (2024) Strategies To Decrease Emissions in Freight Transport.

Narkar, Manya (2024) Optimal Passwordless Continuous Authentication Measures for Remote Employees.

Nguyen, C.N. (2024) Assessing Circularity and Sustainability in Eco-Innovation Parks: A Novel Approach for Optimizing SME Contributions.

Nijboer, T.M. (2024) Kickstarting the Next Step in Urban Mobility. Design of an Interactive Design Tool & a New Urban Electric Vehicle.

Nijenhuis, B.G. (2024) Leveraging 5G NR-U Bandwidth Parts in Coexistence with Wi-Fi.

Nijkamp, T. (2024) Computational Analysis of Non-Obstructive Coronary Lesions in Myocardial Infarction Patients Using Lattice Boltzmann Method: High-Risk Plaque or Not?

Nikken, M.S. (2024) Path Planning with DDPMs.

Noort, Luc van (2024) Sensor Framework For Pediatric Cerebral Palsy Ankle Foot Orthosis : Development and Technical Validation.

Oosten, B.T. van (2024) Developing a plate nesting algorithm for a steel processing company.

Oosterling, D. (2024) Reactive Balance Recovery during Perturbed Walking in Incomplete Spinal Cord Injury Patients.

Ottachchige, P.P. (2024) Interaction control with a 3D printed torque sensor in an impedance control framework.

Otter, R.L. den (2024) Designing Voice-Based Games for Children That Stimulate Physically Active Social Play.

Oude Egberink, L.J. (2024) The Improvement of Twence's Bunker Management.

Oğuz, Melike (2024) Creating a collaborative Mixed Reality experience.

Paramitha, D.K. (2024) Analyzing the Role of Team Effectiveness in Educational Outcomes: A Bibliometric Analysis.

Perijoc, S.N. (2024) Quantum AI for Application in Industry : A Workflow Model.

Peters, Jesse J. (2024) Impedance Control for a 2-DOF Compliant Manipulator using Kalman Filter-Based State Estimation.

Peters, Ruben (2024) Dynamic Modelling, Analysis, and Design Optimisation of a Pendulum-Coupled Tuned Mass Damper System Compared to a Multiple Tuned Mass Damper System on a Skyscraper : Case Study of the Taipei 101 Building.

Ploeger, V.S. (2024) A Speculative Approach: By and For the Biosignals and Systems Group.

Poecke, Mitchell J. van (2024) A Purpose-built research device: a case study on a tool built for navigational cues.

Pol, M.C.W.H. van der (2024) Rehabilitation of Jumper’s Knee Adapted to Daily Life.

Post, Anke (2024) Creating environmental awareness for the Symbitron exoskeleton using a depth camera : A step towards using the Symbitron exoskeleton without external support.

Poutsma, T.A.H. (2024) De-stereotyping Game Development Exercises.

Prakash, Meenakshi (2024) Gender Perceptions in chatbots : The Role of Linguistic features.

Qi, Hao (2024) A Study on Reducing Negative Emotions in Self-Reflection Process of Bullet Journal Users : The Formation of Design Principles and Insert Toolkit.

Radhakrishnan Senthilkumaran, Swathika (2024) Arrhythmia-on-a-chip : Modeling cardiac arrhythmia on chip: Investigating anti-arrhythmic drug responses and assessing the impact of structural deformities on signal propagation.

Rajendran, Sruthie (2024) Development of digital twin framework for decision support in flood risk management.

Ramselaar, M.S. (2024) Personalized 3D printed offloading insole to reduce plantar pressure at high-pressure areas.

Rappange, Sam (2024) Leveraging Graded Similarity in Self-Supervised Learning.

Reddy, Suhaas Veera Raghavan (2024) Joint Contribution-Based Client Selection and Resource Allocation leveraging Power Domain NOMA Network.

Redeker, S. (2024) Bike Ego-Trajectory Mapping Using a CNN-LSTM With IMU and Monocular Camera.

Reus, J.A.M. (2024) Exploring Smartphone-Based Digital Phenotyping in Monitoring and Detection of Late Effects in Female Breast Cancer Patients.

Riahi, T. (2024) Contactless Heartbeat Estimation with FMCW Radar.

Rienstra, W.D. (2024) From Cloud to Ground : Assessing Integration Platform-as-a-Service (iPaaS) Against On-Premise Integration Platforms.

Rijntjes, J. (2024) Quantitative single-photon emission computed tomography for dose calculation of radioiodine therapy in benign thyroid diseases.

Roelink, D.J. (2024) Optimization of return freight selection.

Rooij, R.N. de (2024) Cardioprotective drugs to inhibit DOXO-induced cardiotoxicity in combination with trastuzumab for HER2-positive breast cancer treatment.

Rossum, T.A. van (2024) Optimizing the consolidation point of Company X.

Rutten, T.J.L. (2024) Designing a low-cost monitoring system for lymphedema: Empowering life after cancer.

Ruuls, Tamara (2024) Pediatric Respiratory Exacerbation Detection : Innovating Asthma Care with Artificial Intelligence (PREDICTA) : An AI Model to predict pediatric asthma exacerbations and personalized risk factors.

Saha, Swaraj (2024) Comparative analysis of rainfall surface generation using deterministic, stochastic and deep learning approaches.

Samoylenko, A. (2024) US-CT image registration for multimodal motion model application.

Santen, Rob van (2024) Explorative Development of a Standing Device for Active Paraplegics.

Schaaij, Jonathan (2024) The best robot for the job : Optimising robot and actuation design through co-design.

Scheffer, S.J. and Dechesne, F.C.V. and Visser, S.L. de and Salomons, S. and Brus, M.M. (2024) Continue monitoring bij patiënten na Oesophagosresectie : kunnen ECG-karakteristieken klinische achteruitgang voorspellen?

Schildkamp, Rick H. (2024) 3D Printing of Shape Memory Alloy NiTi with Laser Metal Deposition.

Schilt, Elise (2024) Accelerating MRI with optimized sampling patterns in Pulseq.

Scholten, J.H. (2024) Improving production time estimation for a PCBA manufacturer.

Schoorlemmer, V. (2024) Optimizing On-Site Inspection Planning at Eurofins.

Schram, D.A.D. (2024) Effect of Prior Relationship on Attention-seeking Touch.

Schrier, T.P. (2024) Item availability restricted.

Schröder, Jelke (2024) Enhancing Cybersecurity in the Internet of Things through Machine and Deep Learning : A Novel Approach to Threat Detection.

Schuit, Erik M.A (2024) Integration of Rehabilitation Exercises for Running Injuries in Daily Living.

Schut, E.W. (2024) Developing a Tool for Training Pelvic Alignment Awareness in Dancers.

Shah, Hafiz Muhammad Amin (2024) A User Centric Approach to Visualizing Linked Educational Metadata in The ITC Geo Course Hub.

Sinnema, Noah (2024) A New Angle on Turn Detection : A Method for Turn Detection for Varied Angles and Walking Speeds Using IMU's.

Slöetjes, J. (2024) Gaining visibility and improving Inventory Health.

Smeekes, B. (2024) Forecasting demand and creating an inventory policy for Ecorus.

Smeerdijk, Ilan (2024) Battling the labour shortages in the mentally handicapped-care : a data-driven approach.

Smellink, E.M.L. (2024) Estimating spatial cardiac arrest risk.

Smits, J.H.B. (2024) On the Development of a Ground-Positioned Microphone Phased Array for Fly-Over Noise Measurements on Unmanned Aerial Vehicles.

Smulders, J.L. (2024) Improving the medium-term schedule in a home health care context with different demand frequencies.

Spaans, Robert Nathaniël (2024) Applied 3D Technology for Surgery of Small Kidney Tumors.

Sprenkels, Bart (2024) Promoting Motor Learning in Squats through Visual Error Augmented Feedback: A Markerless Motion Capture Approach.

Swennenhuis, L.J. (2024) A journey to predictive maintenance in the fire protection industry.

Swillens, Jan Hein (2024) B2B data consultancy performed by SMEs for growth purposes : A systematic literature review.

Thiel, B.J.F. van (2024) Getting the Balance Right: A Systematic and Data-Driven Approach to Optimize Raw Material Stock Levels.

Timmerman, T.H. (2024) Optimizing assembly line fill rate by minimizing the losses due to discrepancy between truck and workstation lengths.

Tjepkema, W.W.A. (2024) Change Point Detection for Physiological Monitoring.

Todirascu, Emil (2024) Reducing the Electricity Use of Large Language Models.

Tol, Rixt (2024) Remote Real-Time 3D Viewing During Surgery for Supervision and Education: Applications in Endoscopy and Remote Viewing via Camera-equipped Glasses.

Torrenga, Felix (2024) Development of a Three-Dimensional (3D) Model for Preoperative Planning of Lung Segmentectomies for Patients with Stage 1A Non-Small Cell Lung Cancer (NSCLC).

Torrent Nicolau, Quim (2024) To Bi or not to Bi? : Attempts on Charge Readout and Optimization of Single Bismuth Atom Silicon Nanodevices.

Triezenberg, Sterre (2024) Design and evaluation of an adjustable step size trajectory generator for the Symbitron exoskeleton with spinal cord injury users.

Ubbink, S.G.A. (2024) Examination of Holmium-165 microsphere distribution patterns for intratumoral treatment of patients with brain tumours.

Udrea, Mihnea-Adrian (2024) Developing an Expressive Musical Interface for Music Interventions.

Utharavel, S.K. (2024) Item availability restricted.

Veen, K. van der (2024) The perioperative occurrence of hypoxia and the balance between oxygen supply and demand in aortic arch surgery patients.

Veenhuis, Jan (2024) Effects of Er and Eu addition on the fluidity of an A356 alloy in an improved permanent fluidity test mold.

Veldhuizen, A.R.P. (2024) Reducing Pulsation in External Gear Pump Output for Rubber Extrusion.

Veldkamp, Galina (2024) Deriving adequate insights in HMLV manufacturing.

Vent, J.M.H. de (2024) Improving the defect detection performance of Incoming Quality Control.

Verhees, D.A.G.B. (2024) Live staining of bioprinted human pluripotent stem cell-derived tissues.

Veuger, F.A. (2024) A case study on improving the Machine Efficiency of Grolsch’ keg line under continuous operation.

Vicens i Roig, C. (2024) Calibration of a near-infrared optical system for tracking surgical instruments in image-guided interventions.

Vijayan, Vignesh Balaji (2024) Aerial Manipulation Of Deformable Objects.

Visscher, J.H. (2024) Reducing Inventory Levels in the WKZ by Proposing a Revised Inventory Model.

Visser, Adrie (2024) Real-time analysis of Dynamic Contrast Enhanced Ultrasound for catheter position optimisation in Transarterial Radioembolization : a proof-of-concept study in an ex-vivo perfused porcine model.

Vlooswijk, A.G.M. (2024) Effects of adopting a flexible scheduling framework on a radiology department : a multi-stage stochastic program on a rolling horizon integrating employee and resource scheduling based on demand.

Volbeda, Jelmer (2024) Anti-Backlash Mechanisms for Cost-Effective Cycloidal Drive Robotic Actuators: Design and Evaluation.

Voorbach, B.T. (2024) The development of a process control optimisation method for machining SMEs, implemented at Technology Twente.

Vriend, Pascal (2024) Intra-vision : lightweight image processing platform for robotic intervention.

Vuurberg, S.J. (2024) EMG as a support tool for physiotherapy Investigating the role of EMG in determining Return-To-Sports in patients with lateral ankle sprain by physiotherapists.

Waterham, H.J. (2024) Creating a framework to assist heat sealing technology decision-making, with a focus on conduction and ultrasonic sealing.

Weenink, M.J. (2024) Walk in Nature: exploring the potential of Virtual Reality as exercise therapy in the management of axial Spondyloartritis: a mixed methods approach.

Welling, L.K. (2024) Tangibits : Multimodal communication of climate change data - exploring vibration, sound and temperature.

Wibisana, M.I. (2024) Leveraging LiDAR Data and Local Digital Twins Framework for Data-Driven Traffic Simulation.

Wilbers, C. (2024) Improving Product Flow in a Cable Manufacturing Facility through a Buffer Allocation Strategy.

Wilbrink, E.J.J. (2024) Energy Recuperation between DC Motors using Dynamically Reconfigurable Switch Grid.

Wille, D.L. and Arnold Bik, F.C.L.J. and Zeilstra, A.S.W. and Kaiser, N.E.A.N. (2024) Het ontwerp van een biomimetisch pulsatiel systeem aan de hand van een Simulinkmodel ter preservatie en monitoring van een levende homograft.

Willemen, M.C.C. (2024) The development of a patient specific CPAP mask to optimize treatment for OSA patients.

Wittrock, Wieger (2024) De Weg naar Boven : Developing a Hearing Test Video Game.

Woerd, L.G. van der (2024) Development of a Neonatal Umbilical Cannulation Simulator : Design and User Validation.

Wuister, D.C. (2024) Feasibility analysis of a double leg perturbator robotic setup for the purposes of joint impedance estimation.

Xu, J. (2024) Leveraging disagreement among annotators for text classification.

Xu, Pengpeng (2024) Deeper Insight Into Personal Running Pattern With The Assist Of Drones Through Artistic Representation.

Ye, E. (2024) Processing and synchronization of biomechanical data from wearable sensors from Parkinson’s disease patients at home for detection of freezing of gait.

Zanechalová, Rebeka (2024) Supporting the maintenance decisions of HITEC Power Protection by predicting the health state transitions of the UPS system KEM inner bearings.

Zentveld, B.N. (2024) Improving BearingPoint Netherlands’ consultant-to-project KPIs by introducing a consultant-to-project assignment model.

Zijp, Timon van (2024) Correlation between chronic complaints in mild traumatic brain injury patients and quantitative electroencephalography.

de Gruijter Eguiluz, Sofía (2024) Item availability restricted.

ten Holder, C.S. (2024) Making Qualitative Attack Trees Accessible : A Gamified Interactive Visualization for Non-Expert Stakeholders.

van Kekem, J.A.W. (2024) Designing a System to Aid in Conversational Requirement Elicitation Practices : Integrating REConSum and Trace2Conv into a system that can be used and experienced in practice.

2023

Aanen, Mattijs (2023) GNSS-Based Time Synchronisation for Distributed Radio Localisation on Software-Defined Radio.

Albertsboer, E.E. (2023) Planning and scheduling for animal shelters.

Alimawi, Madhat (2023) Cascaded H-bridge Converter Integrated with Split Batteries and with Multilevel AC Output for Household Applications.

Arend, S. (2023) Power Electronics for Stand-alone Offshore Hydrogen Production.

Arunajatesan, Sainivedhitha (2023) Estimation of Joint Stiffness via a Musculoskeletal Model Driven by Motor Neuron Twitch Properties.

Aukema, L.M.N. (2023) Optimization of a navigated fibular cutting guide.

Bel Makhfi, Abdel Aziz (2023) Reliable low-latency networking: many radios, many paths.

Benschop, M.L. (2023) Veerkracht na een heupfractuur : De acceptatie van het Eforto® systeem door heupfractuurpatiënten.

Berg, R. van den (2023) Using computer vision for monitoring the peeling process of semiconducting insulation shield of medium voltage cables.

Bex, A.J.M. (2023) Validation of an ambulatory three IMU setup for measuring foot and CoM position in chronic stroke patients.

Bijkerk, M.E.E. (2023) A conceptualization and system dynamic modeling of business ecosystems.

Bloem, J.S. (2023) Hypertrophic cardiomyopathy : the changes in the non sarcomeric cytoskeleton linked to the nucleus.

Boer, Kylar de (2023) The adaptation of balance of able-bodied humans when exposed to balance perturbations.

Bos, Jochem (2023) Modelling of Shared Control of Endovascular Surgical Instruments in SOFA.

Bot, M. (2023) Clustering patients at the emergency department based on their ECG and PPG signals.

Braat, A.R. and Hassanu, K. and Smit, A.F. (2023) Optimalisatie van fluorescentie-angiografie : standaardisatiestrategieën en meetfactoren die de gemeten fluorescentie-intensiteit beïnvloeden.

Braks, R.J.M. (2023) Motion control of IRONSperm clusters in a vascular model.

Bree, K.D.E. de (2023) Development of a convolutional neural network for the detection of the levator plate : a U-net based structure for MR image segmentation.

Brink, R.S.A. ten (2023) Towards RObot assisted iMage guided surgery using deeP lEarning Techniques (TROMPET): the calibration of flexible instruments for stereotactic navigation in locally advanced and recurrent rectal carcinoma.

Broek, Desmond van den (2023) Creating a general process to measure API performance : generating a KPI-driven dashboard at Air France KLM.

Bui, M. (2023) Optimal care for geriatric hip fracture patients : an interdisciplinary perspective on preoperative decision-making and postoperative rehabilitation.

Bui, M. (2023) Optimal care for geriatric hip fracture patients : an interdisciplinary perspective on preoperative decision-making and postoperative rehabilitation.

Buntsma, Veerle (2023) Using an interactive diner table to influence eating rate in a social setting.

Busink, T. (2023) Development and Technical Validation of a Gait-Synchronised Vibratory Stimulation System for Patients with Parkinson’s Disease.

Busman, I.A.M. (2023) CMAP scan optimization with high density surface-electromyography recordings and the design of new pulse sequences : towards sensitive biomarkers for following ALS disease progressionve biomarkers for following ALS disease progression.

Buter, M. (2023) 3D Preoperative planning and training tool for endoscopic stapes surgery.

Böhmer, Kevin (2023) Radiation resilience evaluation of a Flash-based FPGA with a soft RISC-V Core.

Castelán Castillo, David Daniel (2023) Design of an Energy Management System for Residential Buildings : A Sustainable Approach to Optimize Energy Efficiency and PV Integration.

Cavelaars, D.J. (2023) Measuring gait characteristics using wearable sensors in neurological patients.

Chatzimichail, Kyriakos (2023) Synchronization improvement in automotive Ethernet networks.

Chen, D.T. (2023) Development of Financial Distress Prediction Model for the Watchlist Classification of Wholesale Banking Clients at ING.

Cheng, Yifan (2023) Nudgo : an interactive system for neurodiverse social connections.

Chennaveeranahalli, D.R. (2023) Fabrication and analysis of glucose sensor.

Cho, Halyn (2023) Terra Methodology Refinement: A Proposal of New Methodologies to Measure the Performance of Cement, and Automotive Sectors.

Claessens, M.L. (2023) The dome pelvis osteotomy as alternative for pedicle subtraction osteotomy in patients with loss of lumbar lordosis.

Coenraad, T.L. (2023) Retention for 3D-printed hollow immediate surgical obturators for maxillectomy patients.

Cortenbach, L.E. (2023) The dial-a-ride problem with meeting points : a problem formulation for shared demand responsive transit.

Demmink, M.M.R. (2023) Predicting anxiety disorders : the key to data driven policy.

Denz, S.T. (2023) Medical Liberation for Monstrous Bodies : Cultural Probes for Gender Justice in Breast Cancer Screening.

Derks, F.M.P. (2023) Influence of dynamic flow field on untethered robots controlled by a magnetic field.

Dijk, Nathan van (2023) Advanced wildlife camera trapping using embedded AI machine vision.

Dolas, R.S. (2023) Analytic-driven decision support in cybersecurity : towards effective IP risk management decision-making process.

Doornkamp, C.J. (2023) Dependable Probabilistic Energy Forecasting of Solar Energy for Energy Management Systems.

Dorth, Michelle van (2023) Development of an HRV Biofeedback Tool for signalling Anxiety Levels to Female Competitive Track and Field Athletes.

Drewnik, Damian (2023) Detecting Social Media Influencers of Startup Accelerators Using Social Network Analysis on Twitter.

Duijkers, Floortje (2023) White blood cell depletion of immunomagnetically enriched samples using antibody functionalised surfaces.

Eekelder, L. (2023) The Optimal Model-Based Definition to Reduce Engineering Hours for Besi Packaging.

Eijkemans, J.W. (2023) Sneakily Purposeful Games : A new design strategy for motor-based serious games.

Ekkelkamp, Ilse (2023) Bounded Propulsion of Helical Device with Near-Zero Angle of Attack.

Everink, Suzan (2023) 3D Ultrasound as imaging modality for the pre- and postoperative evaluation of endovascular aortic aneurysm repair.

Fikse, J. (2023) Bluetooth Direction Finding using a Uniform Rectangular Array.

Fitria, Silvi (2023) A Comparison of Deep Neural Networks for Sales Forecasting.

Franken, I.E.J. (2023) Spare part forecasting and inventory management for the service department.

Geraets, E.K.W. (2023) Isolation of HepG2-derived extracellular vesicles in spiked human blood serum using magnetic beads and click chemistry.

Gerdes, Thorben (2023) Enhancing soil health measurements for food forest projects.

Geurink, B.M. (2023) Active MR Tracking in a Static Phantom using a GRASP-sequence.

Graaf, Robert van der (2023) Evaluation of double pulse stimulus types with varying inter pulse intervals for improved observation of the nociceptive function using the NDT method.

Graaf, Silas de (2023) Investigating Availability Computation with Exponential Failure Rates and Fixed-Time Repair Delays.

Greef, Kim de (2023) A Two-Stage Nurse Scheduling Approach for Residential Care Organizations in the Netherlands.

Greveling, Mark (2023) Ultrasound: a reliable method to measure muscle forces around the foot?

Grinwis, Marin (2023) Promoting vegetable consumption among children through an interactive diner table.

Groot, D.J.A. de (2023) Implementing systems engineering in new product development at Benchmark Electronics.

Groote Veldman, W.J. (2023) Optimizing BLE Gateway Positioning in Aviation Industry: An Algorithm Based on Link Budget and Log-Distance Path Loss.

Große-Elshoff, Meike (2023) Getting continuous recirculating flow on a 3D blood vessel-on-chip integrated on a fluidic circuit board.

Gudmundsson, Elias S. (2023) Evaluation of rPAM actuators for usage in haptic teleoperations.

Habets, R.J. (2023) Sweet Inventory Management: An Optimization Study of Perfetti Van Melle's Inventory Policy in Vietnam.

Hagens, Florian (2023) Efficient Task Dispatching for Real-Time Systems: A Case Study in FreeRTOS.

Han, N.I.C.L. (2023) The Effect of α-Synuclein Phosphorylation on the Chaperone Activity of 14-3-3.

Hazelzet, Hans (2023) Development of the Mental Health of Teenagers and Young Adults after the COVID-19 Pandemic: a Longitudinal Study.

Heeg, Rogier (2023) Control of a system based on a 3D printed torque sensor.

Heesterman, S.L. (2023) A Methodology to Determine the Most Cost-Efficient Capacity of CoolblueBikes : Machine learning models to support capacity decisions at the tactical level in delivery routing problems.

Heijblok, M.S. (2023) MATLAB database creation and visualization for a pediatric asthma cohort multiple randomized controlled trial.

Hendriks, J.J. (2023) Interactive Segmentation in Space-time Memory Networks.

Heugten, R.J.P. van (2023) Optimization of Clinical Application and User-Friendliness of High-Resolution Manometry Analysis in Head- and Neck Cancer Patients.

Hoekstra, Femke (2023) Measuring activity intensity with heart rate using Fitbit Versa 3 and Zephyr HxM : a validation study.

Hofman, M. (2023) Novel Deep Learning Methods for Modeling and Prediction of Abdominal Aortic Aneurysm Growth.

Hoogendoorn, J.A. (2023) A capacity-driven due date assignment and workload spreading approach in a make-to-order production environment.

Hornman, A.E. (2023) Parametric Study of Scaling Rules for a PEM Fuel Cell in Untethered Microrobots.

Horstman, J.B.M. (2023) Optimizing the planning of regular multi-disciplinary checkups in Isala using discrete event simulation.

Huisman, E.H. (2023) A standardised layout data model and visualisation tool to showcase the performance of class-based storage policies in warehouses.

Jager, K.E. de (2023) Development of a microfluidic device for point-of-care testing of free thiol levels in plasma : A lab-on-a-chip for biomarker detection of oxidative stress in IBD patients.

Jansen, Wytse S. (2023) Warehouse Layout Design at NXP ICN8 Nijmegen.

Jaspar, S.L.J.O. (2023) Generalization capabilities of a learning from demonstration frameworkcapturing a human controller.

Jaspar, S.L.J.O. (2023) Generalization capabilities of a learning from demonstration framework capturing a human controller.

Jeeva, Joshua Anith Singh (2023) Risk Assessment of Humanoid Robot EVE-r3.

Jellema, Hylke Jesse (2023) Privacy-Friendly Room Occupancy Measurement System.

Jensema, S.J.J. (2023) Improving the storage capacity of Twence’s central warehouse by testing alternative layouts.

Jeulink, Mr Kevin (2023) The conception, development, implementation of a NMPC controller for the Omnimorph.

Jeurissen, S.G. (2023) Dairy side-stream valorization through the application of microbiological processes.

Jia, Yizhen (2023) Exploring Emotional Transmission Through Haptics in Mediated Social Interaction : Transmit happiness through haptic hugs.

Jong, P.E.R. de and Kluiving, R and Sirin, V.O. and Spijker, I.M. (2023) Het ontwerpen van een virtueel 3D-model met een boorfunctie voor het preoperatief patiënt specifiek voorbereiden van een mastoïdectomie.

Jong, Sjoerd de (2023) Development of an Eye-controllable Self-Driving Wheelchair.

Jong, Wilke B. de (2023) Exploring the design space of loss of initiative for people with dementia.

Kalidindi, Kaush (2023) Ontogenetic Epistemology of AI: An Investigation into the Role of Machine Learning in Knowledge Production Through its Genesis and Genealogy.

Kannan, Sneha (2023) Exploring the Design of PROMs Dashboards for Individual Level Decision Making in Cancer Patients and Developing an Interactive Dashboard Reflecting Stakeholder Preferences.

Kapoor, R. (2023) Breathe : development and design of a wearable for resonant breathing coaching with tactile feedback.

Kappert, S. (2023) Development of a Silicone 3D Printing Process Enabling Embedded Sensors for Soft Robotic Applications.

Kappeyne van de Coppello, L.A. (2023) Creatinine removal from full human blood by in-house modules during recirculation dialysis experiments.

Kerkhof, T.H. (2023) Developing a supplier timeslot indication model for an e-fulfillment center balancing incoming workload.

Kiewiet, Sander (2023) An implementation of an open-source MRI sequencing platform framework.

Kim, BSc. N.Y. (2023) Towards Longitudinal Three-Dimensional Photoacoustic Imaging: An Automatic Image Registration Framework.

Kingma, Leon (2023) Assessing the Dependency Between Claim Frequency and Claim Severity for a Dutch Home Content Insurance Portfolio : A comparative case study of independent and dependent frequency-severity models.

Klinkert, Julia L. (2023) Optical See-Through vs. Video See-Through Mixed Reality for Rehabilitation : Exploring the effects of mixed reality on the experience of motor rehabilitation of ABI patients through the eyes of the patient and therapist.

Kloosterman, C. (2023) Ontwikkeling van Artificial Intelligence in de Zorg en de Rol en Betrokkenheid van Stakeholders.

Knizia, Jan F. (2023) A platform-based design perspective on pyrolysis technology selection considering green energy, biochar production and carbon removal.

Kok, L.W. (2023) Investigating end-to-end logistics : a strategic analysis of intermodal transportation.

Kok, M.R. (2023) Household electricity load forecasting for demand side management applications.

Kokkeler, C.J. (2023) PROMISE : Process Mining for SMEs: a Methodology.

Koopman, N.H.D. (2023) Improving internal routing operations in the automotive industry.

Kooy, S.J. (2023) Development of a Rainwater Harvesting System for Organic Gardening Drienerlo (BTD).

Korporaal, L.A. (2023) Studying the Effect of Added Exercises to VR Nature on Feelings of Subjective Vitality, Energy, Tension and Stress in Students.

Krabbe, T. (2023) Characterisation of VNS-induced evoked potentials in epilepsy patients.

Kraker, L.M. de (2023) Innovation Focus Areas for Cervical Cancer Brachytherapy Treatment in Academic European Hospitals.

Krakers, S.M. (2023) Towards the Optimization of Surgical Hallux Valgus Corrections.

Kravchenko, Serafym (2023) Development of a finger vein acquisition device with side illumination.

Kruif, Iris de (2023) Designing a KPI dashboard for the test process of tape drives at Bluetron.

Kruiff, K.T. de (2023) Concurrent haptic feedback for improving the body balance of front and back crawl swimming.

Kuks, E.M.A. (2023) Enhancing reuse ecosystem development for primary FMCG packaging : the development of a support tool for the supermarket branch.

Laan, J.J. (2023) Electricity grid congestion and application of a novel tariff in the Netherlands.

Laar, A.C. van (2023) Expanding an asset management reference model: bridging the gap between data and maintenance.

Lacina, F.R. (2023) Supercapacitor technologies to improve the power quality in dc microgrids.

Langeveld, K.A. (2023) Increasing the revenue from service-provision through servitization.

Lee, Ari (2023) Enhancing the Self-Regulated Learning Process Using a Brain-Computer Interface with Auditory Neurofeedback.

Leunissen, Iris (2023) Creating a hypoxic environment in a chip : Developing a hydrid hydrogel to mimic the hypoxic breast tumor microenvironment with an organ-on-chip platform.

Li, Jiayu (2023) Improving Decision Making in Warehouse : Data-Driven Forecasting and Storage Simulation.

Lieverse, F. (2023) Lifestyle Counselling of People with Type 2 Diabetes and Low Health Literacy.

Lopez Tellez, Alejandro (2023) Design of a MMT system for an environment with changeable dynamics.

Meevis, Y.H.W. (2023) Quantitative spectroscopic photoacoustic imaging using reference fluence method.

Meijer, Adam (2023) Experiencing Textures Through Touch Technology.

Meijerink, M.J. (2023) Improving packaging recyclability from a waste treatment perspective - The development of an interactive tool on design for recycling.

Michael, Michael (2023) Moisture Optimization and Heating Process Automation of Freeze-Dried Coffee Production: A Case Study at Jacobs Douwe Egberts Peet's.

Migaj, Leon (2023) The development of a low-cost spectroscopy based turbidity measurement system.

Minghetti, V.M. (2023) On the right track: Developing a multi-objective routing optimization model for high-speed logistics companies.

Mol, Lysanne (2023) Developing a lung-on-chip device for studying the impact of micro- and nanoplastics on human lung tissue.

Morales Ortega, Luis Rodrigoandrés (2023) A Digital Twin for Ground Water Table Monitoring.

Morra, B.C.J. (2023) Design of a rapid characterization method to predict the sealing behaviour of LLDPE packaging films.

Morsink, C.F. (2023) Setting the Tone : A Phantom Study on the Effect of Skin Pigmentation on Transcutaneous Bilirubin Measurements.

Nagel, Emiel (2023) Spatial audio augmented reality for positioning and navigation with Airpods.

Naik, Nilay Prashant (2023) Application Portfolio Management Maturity : A Grounded Theory investigation on the processes and expected benefits.

Nelissen, M.L. (2023) The feasibility of measuring nociceptive detection thresholds and electrical brain responses during spinal cord stimulation while electrical stimuli are applied to the foot dorsa : An explorative study in patients with persistent spinal pain syndrome type 2.

Nielen, Hans (2023) Educating the UT community on waste separation through a physical installation.

Nijhuis, Chiel (2023) Modelling Obsolescence Resolution Strategies at Thales Hengelo.

Ong, C.G.Y (2023) Innovatie van modulaire reservoirs van microvloeistoffen voor “Orgaan-Op-Chip”: verbetering op gebruikersvriendelijkheid, herbruikbaarheid en vloeistof bemonstering.

Ooster, P. van 't (2023) Validation of Vital Sign Monitoring Devices.

Oosterhout, S.H. (2023) AI as a Creative Catalyst : AIs role in design, and measuring AI-based idea generation.

Oostrom, R.D. van (2023) Design of an orbital shaker for future laboratory use.

Ordonez Gonzalez, Yeiny Karina (2023) Designing a Regulatory Implementation Strategy for Developing Affordable Medical Devices for Low-Resource Settings.

Ori, Sonali (2023) Human-Robot partnerships in various workplaces.

Ouahabi, K. El (2023) Design of a user interface capable of visualizing radio frequency interference data in spatial context using augmented reality.

Ouderaa, J. van der (2023) Development of a new workflow for surgical planning in head and neck reconstructive surgery using re-perfused tissue transfers.

Palani, Vignesh (2023) Design and Development of Variable Impedance Actuator using a Multi Axis Motor.

París Quijada, Elena (2023) Evaluation of model predictive control and adaptive model predictive control for a selected generalisable daily task including uncertainties.

Paulissen, J.W.H. (2023) KamerMaker : A Novel Approach to the Reconstruction of Personal Indoor Spaces in Virtual Environments.

Peetsma, Jasper (2023) The Development of a Novel Method for Measuring Biomechanical Features of Agility Using Markerless Motion Capture.

Peters, S.F. (2023) Part 1: Design of a Diameter Dashboard displaying personalized blood glucose levels, physical activity, and nutritional data for type 2 diabetes patients. Part 2: Development of an algorithm to predict blood glucose values integrating glucose parameters, activity, and nutritional data using machine learning techniques.

Peut, A.M. van de (2023) Breathless Battles : The Optimization of an eHealth Application for Support in Self-Management for COPD patients with Complex Chronic Conditions through Human-Centered Design.

Pieterse, Wybe (2023) The difference in UX between open and closed questions for novice users in conversational search.

Pijkeren, J.P.R. van (2023) Designing the logistical network for a parcel carrier.

Pintilie, Alexandra (2023) Data collection and user engagement in eHealth applications focused on canine health.

Pistorius, C. (2023) Comparing supervised machine learning algorithms for client-specific care plans.

Post, Ir. C.A. (2023) The Impact of Emerging Technologies and Energy Management Systems on a Neighbourhood.

Posłuszna, Zuzanna (2023) Shape analysis for the design of a preformed osteosynthesis plate for accurate zygomatic reconstruction.

Pot, Coos (2023) Designing and developing a haptic feedback wearable to improve motor task performance : A case study on the squat.

Prins, T. (2023) Ordering process optimization of paint at Uw Onderhoudspartner Lenferink.

Prinsenberg, Finn (2023) Additive Manufacturing as an industrial production process : a myth or actual reality? Technical guideline design for the implementation of Additive Manufacturing as a production process for industrial plastic products.

Putman, E.J. (2023) Real-time 3D MR-Thermometry using a Stack-of-Stars Gradient Echo Pulse Sequence.

Raven Garcia, J. (2023) A geometric port-Hamiltonian modelling and simulation framework for morphing-wing UAVs.

Ravi, Vinod (2023) Characterization and testing of a novel reliable method to connect metallic and 3D-printed polymeric conductors.

Resing, Marvin (2023) Industrial Cobot Sound Design Study : Audio Design Principles for Industrial Human-Robot Interaction.

Reuver, I.K.E. (2023) Increasing the selectivity of hypermethylated DNA enrichment by a two-step washing process.

Riet, Alex te (2023) How to use a wearable like a smartwatch as a tool to help guide students into better mental well-being.

Rietberg, Max (2023) Quantified Photoacoustics for Carotid Artery Imaging.

Rietberg, Max (2023) Quantified Photoacoustics for Carotid Artery Imaging.

Rikhof, Anne (2023) Modelling the yield of building integrated photovoltaic systems employing free space luminescent solar concentrators.

Rinzema, R.T.E. (2023) Identifying Opportunities for Improvement of the Virtual Reality Biofeedback Game DEEP in Forensic Inpatient Care – A Qualitative Multi-Method Study.

Roerink, Jasper (2023) Ordering policy optimisation for forecast driven orders within HTM-Aerotec.

Rolfes, Stan (2023) Item availability restricted.

Room, J.T. (2023) Transducer selection & protocol compliance detection algorithm design as a basis for automated point-of-care lung ultrasound screening of tuberculosis.

Ruitenbeek, Floris van (2023) Design of a Variable Stiffness Mechanism with Prescribed Behaviour Using a Variable Cam Pulley.

Russchen, Jilmer (2023) Improving production logistics.

Saini, A. (2023) Linear controller design for an omnidirectional morphing UAV at different operating points.

Sarmiento Casas, Maria Alejandra (2023) Designing a Sustainability Program for the Manufacturing Industry: Establishing a Sustainability Baseline for VDL ETG.

Savitri, Dea Amelia (2023) Design and implementation of velocity in risk assessment with enterprise architecture modeling.

Schipper, Brian (2023) Improvements in the development and redesign of a tea infuser production machine at TeaWall during continuous production.

Schoonbrood, Maxime J. P. (2023) In vivo validation of ultrafast ultrasound-based velocity vector imaging.

Schoonhoven, A.D. (2023) Predicting deterioration of early sepsis patients using wearables.

Schram, Renske (2023) Optimization of 3D MRI topography for stereotactic navigation in pelvic surgery.

Schrijver, G.H.W. (2023) Plant and Controller Co-optimization for an Active Vibration Isolation System Using Convexified LMIs.

Schrover, T.E.P. and Tabak, N. and Uiters, J.W.H. (2023) Determining the most suitable location for electrode placement to assess respiratory muscle activation with surface electromyography in COPD patients using chronic nocturnal non-invasive ventilation at home.

Schulten, M.K. (2023) Pelvic floor muscle therapy, pessary wearing or both? : Evaluating the effect of pelvic floor muscle therapy additional to pessary wearing, compared to pessary wearing alone, for the treatment of pelvic organ prolapse by means of 4D transperineal ultrasound.

Schuppert, W.L.C. (2023) Optimizing computed tomography scan scheduling for sustainable energy usage : a simulation study at Medisch Spectrum Twente.

Schut, Astrid (2023) Design and development of a soft total artificial heart.

Siles Cárdenas, L.D.R. (2023) Electromagnetic Field Exposure assessment of 5G NR Cell-free Massive MIMO overlapping with Legacy Cellular Technologies.

Sinyugin, Ilya (2023) Decentralized Finance Protocols : Evaluating Collateralization Mechanisms.

Slob, J.V.M. (2023) Towards multiplex detection of hypermethylated DNA biomarkers on a droplet digital recombinase polymerase amplification platform.

Smienk, Jeroen (2023) Natural language search for personal information retrieval : Benefits and limitations to the user’s experience in bookkeeping software.

Sombroek, E.S. (2023) Establishing a TCP connection between a Graphical User Interface and the controller of a robot.

Sterckel, S.A. (2023) The Heart-Brain Axis : Modelling the heart-brain axis using innovative organ-on-chip technology.

Sterenborg, N.E. (2023) Lightweight online Kalman-filter-based sensitivity estimator for distribution grids utilizing phasor measurements.

Stienstra, L. and Stel, C. and Baan, J. and Roelofs, C. (2023) Optimizing navigation bronchoscopy by improving the biopsy tool and lesion tracking.

Stoian, Vlad-Gabriel (2023) Students' Trust in Automated Grading Through Explainable AI Visualizations.

Stoverink, L.S. (2023) Multi-level optimization-heuristic framework for three-dimensional bin packing problem with item upgrading and outsourcing options.

Straková, S. (2023) User-based Tailoring with Reinforcement Learning for an mHealth, COPD-focused Intervention for Increasing Physical Activity.

Sun, Yiyou (2023) Item availability restricted.

Super, Ilse (2023) The Systematic Development and Implementation of Key Performance Indicators for Tactical Integral Capacity Management : A Case Study at a Single Specialty Breast Cancer Hospital.

Tan, J. (2023) Hollow-pass : hide your pattern password from shoulder surfers.

Timmermans, N.A. (2023) Accuracy of arterial blood pressure waveform measurement via catheter manometer systems in neonatal intensive care.

Uden, B.W. van (2023) Allocation and scheduling of incident general leaders at ProRail.

Uijthof, E.M.T. (2023) Physics-informed reinforcement learning for process design.

Vasilescu, Adrian (2023) Success factors for Federated Data Spaces initiatives.

Veenman, Fleur N.A. (2023) Navigating the Metaverse: A roadmap towards the design of Metaverse applications in enterprise context.

Veltman, Mike (2023) Comparative Study of Fault Detection and Diagnosis for Low-Speed Ball Bearings.

Velze, B.S. van (2023) Departmental integration of an automated material logistic system Case study of integrating an automated material logistics system within the Zaans Medisch Centrum surgical department.

Verhoeven, J.P. (2023) A Controller for Corrective Stepping for a Bipedal Exoskeleton Robot.

Verhulst, D.A. and Tromop, C.R.L. and Bouwen, I. and Hoogstrate, L. (2023) Automation of finding the optimal plate position for a 3D planned osteotomy.

Verschuren, Imke (2023) Using a digital life story book application to enhance communication between people suffering from Alzheimer’s and their caregivers Developing a prototype for a personalised digital life story book.

Vos, R.T. (2023) Genomic profiling of sex-specific differences in an osteoarthritis-on-chip model : design of an organ-on-a-chip holder.

Waal, Monique de (2023) Designing a graphical user interface for gait analysis in dogs.

Wal, A.P. van der (2023) Developing an Order configurator for a standardized product line.

Water, G.H. van de (2023) Designing a framework to gain insight into the automation of defect management at NLR.

Weijzen, Feike (2023) Optimizing transportation of clients for social care services.

Weiss, Jonathan (2023) Cyber Supply Chain Risk Management in the Netherlands: Investigating Structural Elements and Drivers in the Context of EU-Cybersecurity Regulation.

Wel, Stan van der (2023) Determining the balance between general and specialist care of Internal Medicine practitioners based on patient demand.

Wentink, J.S. (2023) Envisioning future applications of Augmented Reality: An agriculture 4.0 case study.

Wiesner, M.L. (2023) From Component to Product Digital capabilities for the Digital Product Passport in the Production Sector.

Wijnja, S.N. (2023) Optimizing Data Movement for Accelerator Cards Using a Software Cache.

Wit, L.J. de (2023) Truck inventory replenishment process optimization at REMONDIS Smart Infra.

Wit, R.A. (2023) Interactive feedback in museums.

Wolff, R.T. de (2023) The design of an adaptive acoustic system for flexible sound attenuation in variable conditions.

Wopereis, Sanne (2023) Capacity planning model in a home care environment.

Ye, D. (2023) Supplier Master Data Integration in Philips.

Yi, Chenhao (2023) From Software Data To Actionable Insights: Designing A Data Dashboard.

Youn, Myungwon (2023) ALERT: Smart Lecture Room : Monitoring students’ concentration levels and providing feedback and stimulation, to improve learning quality.

Zantingh, O.I. (2023) Transcutaneous electrical stimulation modulates persistent inward currents in spinal cord injury subjects: a model-based study.

Zoetekouw, K.F.A. (2023) Reducing staff workload variation through a forecast-driven tactical staff planning : a case study at the obstetrics department of Diakonessenhuis Utrecht.

Zoetelief, Eline (2023) Explorative study of thermal footprint imaging as method to early detect diabetic foot ulcers in a domestic setting : the Bath Mat.

Zwanenburg, M.S. (2023) Design of a Method to Improve the Customer Service Level at an Electronics Production Company : incorporating resource capacities using data available in tactical production planning.

Šerkšnas, Jurgis (2023) Implementing & Integrating Live Mission Recording with Starter Drones.

2022

Aatil, Dalil (2022) Furhat Travelling the World : How Cultural Background Predicts Preference of Receiving Feedback from Social Robots.

Abbaszade, V. (2022) Developing an order acceptance function for Limis Planner.

Akbari, Sahel (2022) Nociceptive Flexion Reflex (NFR) detection at a single Motor Unit (MU) level.

Al Kathemi, M. (2022) Roadmapping in the circular economy: achieving circular inflow and outflow according to the CTI framework.

Albers, E.C. (2022) Cerebral Perfusion during Aortic Arch Surgery.

Aldayeh, A. (2022) Spare-parts costs and process management optimization.

Assink, J.G. (2022) Estimating workload through forecasting and monitoring processing times.

Bansal, A. (2022) Building a value-assessment framework for 4Industry.

Barkman, A.H. (2022) Investigating electrical properties of ADAM 3D printed 17-4PH stainless steel for integrated sensing functionalities.

Barneveld, Noa Joan (2022) Designing communication and diabetes type 2 coaching content for people with low health literacy.

Baumeister, A.S.M. (2022) Optimization of a human CHD8 suppressed blood-brain barrier model.

Beek, Puck van de (2022) Determining the flow of breast milk using echo PIV : building a setup.

Benthem, M.H. van (2022) Difficulty Measure for Radiology Cases with use of Item Analysis and Deep Learning.

Berg, M.A van den (2022) The estimation of rodent population in an area with the use of IR&RGB camera images and USV sounds.

Bergsma, T. (2022) Vocabulary acquisition in new and learned contexts using immersive virtual reality.

Bianchi, T.J. (2022) Designing a smart nest box for automated biodiversity monitoring.

Bijker, Naomi and Jacobse, Evianne and Wolde, Larissa de (2022) In vitro en in vivo validatie van een add-on device voor het monitoren van inhalatiegedrag van kinderen.

Binnenpoorte, F.J. (2022) Increasing the availability of Personal Protective Equipment in a big ad hoc service company.

Bistolfi, I.M.F. (2022) The influence of anthropomorphism on our feelings for faulty robots.

Blankenvoorde, N.J. (2022) Optimization of the order-to-cash process.

Bluiminck, M. (2022) Modelling and control of underactuated finger-based gripper with adjustable compliance for grasping of varying and deformable objects.

Boe, M. (2022) Realtime and Onboard fault diagnosis of UAV motors using RNN prediction model.

Boeve, T. (2022) Comparative analysis between fast and basic scalar multiplication used in elliptic curve cryptography.

Bosman, D.G.J. (2022) Design of a leaf holder for real-time microscopy in the context of precision farming.

Bremer, B. (2022) Design of a fast control system reacting to non-sinusoidal voltage fluctuations.

Brink, K. van den (2022) FLEX : Force Linear to Exponential. Improving time series forecasting models for hydrological level using a scalable ensemble machine learning approach.

Broekman, R. (2022) End user interface for a sepsis diagnostic instrument.

Brugman, S.R.D. (2022) The development of a real-time monitoring system for fatigue detection on truckers.

Bruijn, P.H.A. de (2022) Using discrete event simulation to optimize the brachytherapy treatment process: a case study.

Bruijning, A.S. (2022) The optimal neonate intensive care unit design for the wilhelmina children's hospital.

Buijtenhuis, Bas René (2022) Conversion of CT kilovolt peak and reconstruction kernel using a 3D convolutional neural network for BoneMRI evaluation.

Bulsink, R.E. (2022) Enhancing imaging depth of handheld LED-based photoacoustic imaging.

Chen, Y. (2022) GameEvolver: A tool to potentially automatically improve board games.

Chen, Yang Sophie (2022) Enhancing the Web Browsing Experience on Mobile Devices with AR Glasses.

Collot, C. (2022) Assessing the integration of same-day delivery option from the sustainable, financial, and service angles : a case study in the e-commerce sector.

Couwenberg, F. (2022) Extracting Unseen Classes From Capsule Network Feature Space.

Dekker, Dick (2022) Developing a graphical user interface for a universal drone docking system to aid inspection use-cases.

Dijk, H.B. van (2022) Matching capacity with the predicted workload at the emergency call centre of ProRail.

Diken, S. (2022) Using educational robotics to determine secondary school students' attitude change towards STEM.

Doets, M. (2022) Mechanically activated in-vitro muscle model.

Doremalen, R.F. van (2022) Designing a blueprint schedule to meet access time criteria of priority groups in a preoperative assessment clinic.

Duijn, J.G.A. den (2022) Non-invasive continuous cardiac output monitoring using transthoracic echocardiography (TTE) in ICU patients.

Duong, X.L. (2022) Estimate motor unit organization in Nociceptive Flexion Reflex using Convolutive Blindsource Separation and statistical signal analysis.

Duren, K.M.L. van (2022) Augmented reality for laparoscopic liver navigation.

Eldik, J.E. van (2022) Using forecasting to improve production planning at Wouter Witzel.

Emmink, A. (2022) Inviting mental healthcare professionals to become sensitive for the changing healthcare practice.

Ermans, S.J.E. and Gemert, S.M.F. van and Maas, R. and Versteeg, G. (2022) Dynamisch scannen met directe parametrische imaging: De meerwaarde van de total body Quadra PET/CT-scan.

Eversmann, H.Y.N. (2022) Whole Life Carbon Thinking : market and data analysis of whole life carbon in Dutch renovation projects.

Ewals, L.J.S. (2022) Quantification of bowel loop motion and body composition during radiotherapy for gynecological cancer.

Fujioka, T. (2022) Investigation of TOA/TDOA localization in the presence of receiver sensor position error.

Gankema, M. (2022) A comparison between the footprint and economic impact of a current and a conceptual supply chain.

Gaytan Alvizo, A. (2022) Designing an engaging marathon track technological experience for runners and spectators.

Geelhoed, M. (2022) Interactive display physicalisation for raising awareness of internationalization amongst students.

Gemund, A.P. van (2022) Simultaneous Localization and Mapping In Smart Bikes.

Georgieva, Gergana N. (2022) Last-Mile Delivery Drone Acceptance: Increased knowledge does not imply increased acceptance.

Goldhoorn, Jaap (2022) Automatic Wafer Level Testing of Optical Chips.

Graaf, A.J.M. de (2022) The Design of Vibrotactile Feedback to Coach Posture in Inline Skating.

Greidanus, Joyce (2022) Artificial intelligence based therapeutic response assessment of neoadjuvant immunotherapy for patients with bladder cancer.

Grievink, Guus (2022) Model-based Probabilistic Diagnostics of Cyber-Physical Systems.

Groffen, M.M.L. (2022) Exploring identity matching for low quality images with the help of a pipeline for synthetic face generation.

Groot, M.J.A. de (2022) Sustainability of the HVAC systems in the clinical operating room department.

Gulhane, Devesh (2022) What Face Would You Like To Have? : The Effects of an Avatar's Facial Features on Social Presence.

Haitjema, A. (2022) First steps towards reducing chronic low back pain in horseback riders : objectifying biomechanical parameters using inertial sensors.

Hauser, Brand (2022) GridShield on a Multilayered Electric Grid.

Hazeleger, L.R. (2022) Validity and reconstruction of the intra-arterial blood pressure waveform measured with a catheter-manometer system in critically ill neonates.

Heggeler, BSc R.M. ten (2022) 3D leg and knee alignment measurement methods & planning of guided correction osteotomies.

Heij, J. de (2022) Using Discrete Event Simulation (DES) to improve productivity of Shell Ghent's grease manufacturing plant.

Heijink, Irene (2022) Detection of Freezing of Gait in patients with Parkinson's Disease using a deep learning approach.

Hlukhau, Ihar (2022) Multiphoton microscopy for in-tissue imaging of micro-robots.

Hoefnagel, F.L. and Kuperus, M.A. and Lobregt, I. and Mulder, A.A. (2022) Het ontwerpen van een 3D geprinte boor- en zaagmal op basis van segmentatie van het pelvis op een MRI-scan bij kinderen tussen de vier en tien jaar met heupdysplasie.

Hoen, R.Y. (2022) The effect of mechanical stiffness and the novel ITGA5 targeting peptide in fibroblast activation.

Holtman, E. and Kinderen, B. N. R. de and Elbers, C. M. (2022) Towards colon surgery in daycare in the MST, postoperatieve thuismonitoring na majeure abdominale chirurgie in dagbehandeling met behulp van wearables.

Hommels, T.C. (2022) Control of a wing flap using 3D printed flow sensors and reinforcement learning.

Hoorn, Marleen van (2022) Design of a body-weight controlled clutch for the deliverance of assistance with a peadiatric ankle-foot orthosis.

Horst, Reinier L.C. van der (2022) Error Estimation for Output Prediction of Photovoltaic Systems.

Hover, Q. R. M. (2022) Designing Smart Daily Training Objects for Hand and Arm Rehabilitation after Stroke.

Huggers, T.J.P. (2022) Exploring the potential of Reinforcement Learning-based adaptive control to the artificial pancreas developed by Inreda Diabetics B.V.

Huijsmans, Maarten (2022) The chatbot usability scale : an evaluation of the Dutch version of the BUS-11.

Huisintveld, B.A. (2022) Patient population of the Acute Admission Ward at Rijnstate hospital.

Huntelerslag, D.E. (2022) Stand Up for Yourself : A product concept to support elderly with mobility issues to stand up and sit back down independently in an active environment.

Iyer, Logonadhan (2022) Low temperature combustion kinetics of high mineral paper sludge char particles.

Jacobs, M.J.F. (2022) A software development project ontology.

Jager, A.J. de and Ruijter, B.A. de and Bosman, M. and Bosch, D. and Kessels, J. (2022) Ontwerp van een 3D meetinstrument voor het meten van de druk in de blaas en in de urethra ter hoogte van de prostaat en de externe sfincter tijdens een hoest - Om de kans op post radicale prostatectomie incontinentie preoperatief te voorspellen -.

Jansen, Anouk Charlotte Jolijn (2022) Identifying the activities and experiences of therapists in the implementation of Virtual Reality in mental health care organisations. A mixed-method study about the activities of therapists in the implementation of VR in mental health care organisations and their experiences and needs regarding these activities.

Jelsma, Susanne (2022) Structural and effective brain networks in focal epilepsy.

Kareem, J. (2022) Hall effect and field-effect measurements of tin telluride nanowire devices for novel topological quantum computation.

Kazaferi, A. (2022) UAVs for humanitarian aid : simulation study for Dhading and Nuwakot (Nepal 2015).

Kenzhebay, Meruyert (2022) Planar roof structure extraction from Very High-Resolution aerial images and Digital Surface Models using deep learning.

Kim, Woong (2022) Design and Control of Efficient and Powerful Robot Joints.

Klein Gunnewiek, N.S. and Put, K.T.S. van der and Thoonen, A.P.M. and Woortmeijer, R.H.M. (2022) Validatie van consumenten health sensoren (wearables) voor gebruik in klinisch onderzoek.

Koekkoek op Munsterhuis, K.A. (2022) De detectie van slikbewegingen met de Hexoskin longvolumesensor na inname van voedsel met verschillende structuur.

Koobs, B.A. (2022) Determining the best maintenance strategy per asset using failure rates at Allinq.

Kotte, A.W (2022) Motivating The Unmotivated: Older Adults and Physical Activity.

Kuipers, S.M. (2022) Warehouse design for PoolPlaza.

Laat, N.N. de (2022) CT-based migration analysis of tibial components in total knee arthroplasty.

Lange, MSc. Amy de (2022) Trial-and-Mirror: Enabling climbing movement exploration with interactive puppetry design to enhance out-of-action perceptual motor skill acquisition.

Limpers, W. (2022) Production process design in the sheltered workshop of VMI.

Lingen, A.C. ter (2022) Development of a bladder phantom to use with OCT and miniature camera experiments performed by the robot-controlled catheter of the Next-Gen In-Vivo project.

Lobeek, Jaap (2022) A 3D deep learning method for the prediction of breast tumor response to neoadjuvant chemotherapy using MR images without the need for a tumor segmentation.

Loboka, M.S.D. (2022) Improving the efficiency of the assembly department.

Logendran, T. (2022) Automatic Lung Aeration Assessment for Pediatric Lung Ultrasound Imaging.

Loh, Sönke van (2022) Classification of eating gestures using a wrist worn IMU and the deep learning model InceptionTime.

Looms, T.J. (2022) Improving the automated dosing system of an industrial food production company.

Lucas, W.E. (2022) Developing a design method and tool for producing customizable forming shoulders.

Luong, J. (2022) Deformation modelling and gripper contact simulation of deformable objects.

Lute, S. (2022) Improving retailers' inventory updates in an online shopping platform : establishing a method for real-time inventory connection.

Maan, M.J. (2022) Development of the ThESSA electrode : a thermo-electrical stimulation electrode for nociceptive cutaneous fibers - Exploration of the functionality of a heat conducting intra-epidermal electrical stimulation electrode.

Matser, Iris (2022) Soft-tissue tuning in a personalized musculoskeletal knee model using quantitative comparison between simulated and intraoperatively measured knee laxity.

Meijerink, Stijn and Mol, Seb and Steentjes, Jelle (2022) Towards a personalised endovascular treatment for abdominal aortic aneurysm.

Menifer, Savio (2022) Firefly Island: Exploring intimacy in social VR.

Meuleman, Jelmer David (2022) Automated 120° MMI Based Downconverter Design.

Meulenbroek, N. (2022) Improving reliability of the supply of building materials at Dura Vermeer.

Michorius, M.X.R. (2022) The use of Rayleigh-Raman scattering to investigate milk fat globules.

Middelhoek, BSc. Kaz I.N.A. (2022) Drug-Loaded IRONSperm Clusters: Modeling, Actuation and Ultrasound Imaging.

Molder, S. te (2022) Improving the order picking performance at Scania Production Zwolle.

Moort, M.R. van (2022) Aiming for circular solar energy : the development and evaluation of a method for neutralising the environmental impact of a company’s value chain.

Morsinkhof, Niek (2022) Development and implementation of an MR-safe Encoder for pneumatic actuators of the MR-safe catheter robot for endovascular applications.

Munster, Bram van (2022) Applied product lifecycle management for scaling development : an information management methodology.

Neacsu, T. (2022) From EDIFACT to OpenTripModel: analysis, migration and guidelines based on data from real-world logistics companies.

Nicklin, J.M. (2022) Improving forecasting using imperfect advanced demand information.

Nieuwenhuys, W.W. (2022) The comparison of the accuracy of camera-based skeleton trackers during the stepping response for recovering balance in a home based environment.

Nijhuis, T.A. (2022) How to design an account-based marketing campaign for TwenPack?

Nijskens, Lotte (2022) Contrast generalisation in deep learning-based brain MRI-to-CT synthesis.

Nikolova, K. (2022) Framework and practical guidelines for creating a current state analysis for (re)designing an HMI within the Industry 4.0 era. Case study.

Oberhofer, L. (2022) Item availability restricted.

Omtzigt, C.E.S. (2022) Developing a modular gaming handheld for gamers with muscular dystrophy.

Paalvast, A.S. (2022) Missing data in continuously monitored vital signs of high-risk surgical patients.

Patel, Vishakha (2022) Simulation-Based Review of Selected LiDAR System Designs for Mobile Mapping.

Pater, S. (2022) Development of hollow fiber membranes prepared with the green solvent Agnique® AMD 3L for haemodialysis.

Pinkster, A.E. and Smelt, A.D. and Meyer, M.H.C. (2022) Aangezichtsprothetiek op afstand.

Plakke, A.L. (2022) Transparent transducer for photoacoustic imaging: Making a 2x2 array using PVDF coated with ITO.

Poelgeest, Jorrit van (2022) Optimizing Pressure Settings in Mechanically Ventilated Infants Utilizing Forced Oscillation Technique and Transcutaneous Diaphragmatic Electromyography.

Poll, T.A. van der (2022) Predicting utilization in a multi-provider ambulatory allied healthcare organisation.

Potijk, M.E.M. and Trouw, E.E. and Vredenbregt, M. and Jong, D. de (2022) Semiautomatische meetmethode voor de Posterior Tibial Slope op een MRI.

Pradhan, S. (2022) Concept design of a novel Ferrofluid based feedback system for a primary system of a versatile endovascular assisting robot.

Pruijssers, C.W.A. (2022) Towards intra-operative assessment of resection margins in colorectal cancer using diffuse reflectance spectroscopy and ultrasound.

Pullen, C.E. (2022) Prognostic value of 18FFDG PET radiomics to detect peritoneal and distant metastases in locally advanced gastric cancer - a side-study of the prospective multicenter PLASTIC trial.

Ramesh, S. (2022) The design of a data governance framework for quality, security and sustainability : a qualitative approach.

Rauch, L.R. (2022) “Mind the Gap(s)“ in mental health care : How Health applications are integrated in clinical practice for patients with schizophrenia spectrum disorders : a scoping review.

Riefel, Miriam (2022) MIND YOURSELF : Using an artistic psychological brain-computer interface to increase self-consciousness.

Riepen, M.M.J. (2022) Development of a Tiny House Rainwater Catchment System (RCS).

Riet, D.S. den (2022) Improving the sustainability of waste streams at the Heart Center of Isala Hospital in Zwolle.

Rietvelt, D.C.J.C (2022) Extracting information from funding opportunities using state-of-the-art NLP method BERT with minimized data annotation.

Rijswijk, Nicolle T. van (2022) Estimation of tibial bone load during outdoor running with Inertial Measurement Units.

Ringoot, J.H. (2022) Creation and validation of a 405 nm laser Raman imaging setup.

Rodenburg, B.E. (2022) Werkwijze omtrent complicaties van de vakgroep KNO van Ziekenhuis X.

Rook, Anne (2022) Evaluation of options to improve accurate execution of osteotomies of the lower limb.

Roozendaal, S.P. van (2022) It is time to become active.

Rust, R. (2022) Tactical capacity allocation in hospitals to optimize production within the budget.

Saralaya, G. (2022) Implementation of ICT infrastructure in high schools of rural & remote regions.

Schenk, J.I. (2022) ProRail Incident Handling : An Incident Handler Coverage Allocation Optimization Model.

Schockemöhle, Vera (2022) Translating data from wearable sensors in an understandable way to motivate older adults.

Schoenmakers, M.A. (2022) Monitoring mitochondrial oxygen levels via protoporphyrin-IX triplet state lifetime technique: assessment of factors reducing measurement accuracy.

Schoneveld, S. (2022) A modular casing for transporting sterile surgical instruments.

Schooten, R.W. van (2022) Automated berth planning and quay crane allocation at a Dutch container terminal.

Schwemin, L. (2022) Artificial Intelligence Conversational Agents : Using Card Sorting to evaluate the Chatbot Usability Scale (BUS-11), and investigate this in relation to Chatbot Experience.

Shao, Tianze (2022) The Added Value of UAVs in Last-Mile Humanitarian Logistics in South Sudan – A Simulation Study.

Singhal, A.A. (2022) Improving extreme multi-label text classification with sentence level prediction.

Sisavanh, Fabian (2022) Energy-efficient trajectory control for variable-tilt drones by exploiting the aerodynamic proximity effect close to surfaces.

Sowa, A.M. (2022) Development of a computer vision-based system for recognising fatigue of truck drivers.

Spek, M. J. van der (2022) Understanding and Modelling the Vascular Biometric Imaging Procedure.

Spijkerboer, K.G.P. (2022) To improve patient-specific visualization during the surgical treatment of chest wall Ewing sarcomas in pediatric oncology using 3D patient-specific models and augmented reality.

Spuijbroek, M. (2022) De relatie tussen de Time In Range en het gebruik van een FreeStyle Libre sensor bij Diabetes Mellitus Type 1-patiënten.

Staal, L.K. (2022) Improving the appointment scheduling at the day-care ward : a simulation study.

Straathof, T. (2022) Prediction of energy consumption of rail freight transports using machine learning.

Szewczyk, J. (2022) Item availability restricted.

Teekens, S. (2022) Tangible and immersive data physicalisation using sound and temperature with climate change data.

Thoonen, Maarten (2022) Using activity recognition to improve heart rate monitoring accuracy.

Tijburg, Alette J. (2022) Design of a temperature-controlled breast phantom for investigations into the temperature stability in a photoacoustic tomographic breast imager.

Tolboom, L.C. (2022) Exploring type 2 asthma phenotypes and taking steps towards measurements of respiratory mechanics during exercise.

Vaatstra, H.S.J. (2022) Optimising the safety of crossing railroads to aim for a safer rail net.

Vaish, P. (2022) On multi-stage job processing with asymmetric transition costs between operations.

Varenhorst, I.A.M. (2022) GridShield : Robust Control Algorithms to Prevent Power Outages.

Veldman, O.P. (2022) Investigating 14-3-3’s Binding Site upon Interaction with α-Synuclein Through Microscale Thermophoresis Based Competitive Assay.

Verheijen, B.J. (2022) Supply chain risk mitigation strategies : how the Covid-19 pandemic affected the watch industry and what can be improved for future disruptions?

Verma, Jatin (2022) Redesigning the DELMIA workforce planner mobile application to improve its usability and the UX flow.

Visscher, A.L. (2022) Designing for technologically mediated social connectedness between runners and spectators at the marathon finish line.

Voogt, I.J. (2022) Using VHHs to enhance the effect of BMP-7 for the treatment of osteoarthritis.

Vroemen, S.H.J. (2022) Reducing throughput time of static Machine Support Frames at Mecal.

Vuijk, J.G.J. (2022) Device-free monitoring of vital signs to support emotion-aware music systems for people with dementia.

Vulders, Lisa (2022) Quantification of Physical Resilience in Older Adults Using Continuous Blood Pressure Signals.

Wasserfuhr, Veit (2022) A Literature Review of Methods, Approaches and Tools to Automate the Process of Systematic Literature Reviews.

Watford-Spence, A.T.R. (2022) The effectiveness and usability of companion robots in combating loneliness in the elderly in mental healthcare : a scoping literature review.

Weernink, C.J.H. (2022) Light fluence marker for quantitative photoacoustic imaging.

Wei, Y. (2022) Sense you in TeleTouch : designing mediated social touch in asynchronous communication.

Wender, F. (2022) Relatie tussen fysieke activiteit en hypoglykemie bij diabetes mellitus type 2 patiënten.

Wengel, X.J. ter (2022) Peak tibial acceleration as an indicator of tibial bone load during running.

Wengel, ir. X.J. ter (2022) Imagine Tomorrow, Challenge Today: Constructing A Technological Roadmap For Sports Innovation Through Automated Patent Analysis.

Wielens, J.M. (2022) Steering System Design for Asphalt Drum Dryers.

Wienk, Ruben (2022) Redesigning the repair process flow at Thales Hengelo.

Wijst, N.J.M. van der (2022) A new decision support system for managing spare parts : avoiding unplanned downtime.

Wilde, M. de (2022) Heart rate response to body movement: insight into the recovery of elderly after hip fracture surgery.

Wismadi, M.T. (2022) The relation between street pattern and traffic congestion, an investigation through machine learning approach.

Wisselink, N. (2022) Design of an FPGA based PLL system.

With, A.J.V. de (2022) SpiroPlay: a study to evaluate gamified spirometry in asthmatic children.

Zijlstra, Hidde (2022) Exploring Digital Suriname: The current state of digitalisation and the challenges that lie ahead.

Zwetsloot, L.M. (2022) The future of interstitial brachytherapy : development of a 3D printed add-on for improved needle placement in interstitial brachytherapy for patients with paravaginal tumors.

2021

Aalst, J. van and Duisterwinkel, N. and Groenewoud, J. and Kloppenberg, C. (2021) Een objectieve kwantificatiemethode voor beharing die gebruik maakt van nabij-infrarood en ultraviolet microscopie en automatische beeldanalyse.

Achterberg, W.D. (2021) Project: Symbiosis (the development of an interactive swarm installation for Lumus Instruments).

Adi, A.B. (2021) Development of 3D-printed angle sensor for feedback in soft robotic applications.

Ako, Alona and Esma, Alasağ and Ilse, Jonkhof and Renso, Steunenberg (2021) Het verschil in accuraatheid van een preoperatieve diagnose gesteld met behulp van radiomics in vergelijking met de huidige methode bij patiënten met een cysteuze laesie in de pancreas.

Amaral, A. and Heeringa, I.R. and Holtkamp, I.C. and Leemreize, A.J. (2021) Continuous monitoring of walking, standing, sitting and lying in elderly with the use of wearable sensors.

Arora, G.S. (2021) Exploring Possibilities to Improve Distant Dining Experience for Young Expats with their Loved Ones over Time and Space Gap Issues.

Ashaqa, S. (2021) A preliminary cost-effectiveness analysis of the You2yourself health monitor for earlier detection of lung cancer.

Azampanah, K and Corbière, L.B. and Jansen, C.E. and Kruidhof, L. (2021) Elektrodeconfiguratie voor non-invasief meten van diafragma-activiteit : een optimale positie van elektrodes voor oppervlakte-EMG bij verschillende diafragmahoogtes.

Bakker, I. and Bonekamp, S.J.H. and Os, O.E. den and Rispens, O.C. (2021) Patient-specific 3D planning based on preoperative simulation in patellofemoral instability due to trochlear dysplasia.

Balashov, Dmytro (2021) Techno-economic Feasibility of Pathways for an Electric Transition for Petrol Stations.

Benneker, Bram G. (2021) Development of a Cost Price Model to Support Bid Price Estimation.

Berends, B. BSc (2021) Condyle-related improvements in orthognathic surgery.

Berghuis, D.P.J. (2021) Integral capacity management between the outpatient clinics and the centre for radiology and nuclear medicine.

Bergman, L.B.F. (2021) The optimization of the in-house inventory supply chain at Medisch Spectrum Twente.

Bergwerff, E. (2021) Towards the application of virtual planning and patient specific guides in complex foot surgery.

Bielevelt, F. (2021) An objective, automated and Sunnybrook-based facial grading system for facial paralysis patients.

Boer, G.L.A. (2021) Metamediation :how technologies affect their appropriation.

Boerrigter, T.H. (2021) Augmenting the process of schema matching with machine learning-based Intelligence Amplification.

Bollen, L.M. (2021) Hardware acceleration of sweep detection using Clash : Computer Architecture for Embedded Systems.

Bolscher, Wouter F. ten (2021) Wireless Navigation for Tumor Localization and Resection Margin Assessment during Laparoscopic Rectal Cancer Surgery.

Borger, E.J.R. (2021) Maintenance Management Optimization by Asset Categorisation.

Braakman, H.G.D. (2021) Human impedance regulation in haptic control using electromyography combined with the posture of the human arm to increase transparency within telemanipulation control.

Brant, Maurits (2021) Driving Eurol's production scheduling forward with scheduling algorithms: A case study.

Brekel, A. van den (2021) Assessing the patellar tracking pattern before versus after total knee arthroplasty using dynamic computed tomography : a cadaveric study.

Brekelmans, R. and Eek, D.M.C. and Scheers, M.E.H. and Schooten, S.L. (2021) Evaluatie van softwareprogramma's voor patiënt-specifieke 3D longmodellen bij de preoperatieve planning van een segmentectomie.

Bunte, S. (2021) Introducing cooperativeness for agrobotics : an agent-based approach.

Busger op Vollenbroek, T.J.H. (2021) Improving the storage assignment of (semi-)finished goods at Bolletje.

Busink, K. (2021) 2D PIV experiments of oscillatory flow in a stenosis : a study into the physics of flow of cerebrospinal fluid.

Bustraan, M.C. (2021) Developing quadratic programming constraints for human safety : an application of unified safety criteria to multi-task robot control.

Cavelaars, D.J. (2021) Predicting TSB values using TcB measurements and patient characteristics with machine learning.

Cernat, Catalin (2021) Tissue characterization of puborectalis muscle from 3D ultrasound.

Costa Eufrasio, Gabriel (2021) Manual brewing to automated brewer : creating more user convenience in single-serve immersion coffee brewing.

Dalenoord, F.R.A. (2021) The effect of nitric oxide on macrophage polarization in the synovial membrane.

Delden, M.G. van and Leeuwen, C.J. van and Metz, T.J. and Spaans, R.N. (2021) Proof of concept : quantitative measurement of colorectal polyps from an Endoscopic Image.

Denga, Adarsh Aaron (2021) Energy Optimisation Through Machine Learning in Wireless Networks.

Diederiks, V.L. (2021) Multichannel surface EMG and machine learning for classification of facial expressions.

Dijk, M. van (2021) Substitution of polymer interior packaging with the use of biodegradable materials.

Dijkshoorn, P.C. (2021) Low power ASIC design of a DDPSK demodulator.

Doorn, M.S. (2021) Translocation of the food-related amyloid fibrils hen egg-white lysozyme and α-Synuclein in in vitro cell models of the epithelial intestinal barrier For the evaluation of risks associated with amyloid fibrils.

Duursma, I. (2021) A novel strategy for the treatment of osteoarthritis by restoring joint homeostasis using natural antagonists.

Duwe, Sven (2021) Clarifying the unknown workload in a startup using Business Process Modeling.

Egging, R.M. (2021) AI-based prediction model of surgical difficulty in laparoscopic cholecystectomy.

Egmond, C.A.W. van (2021) Tissue type classification and resection margin estimation of colorectal cancer using ultrasound, elastography, and diffuse reflectance spectroscopy.

Elbert, Thieme (2021) Using FRET probes to determine state of disassembly of cowpea chlorotic mottle virus.

Elsafty, Mohamed (2021) Process Optimization for the Order Management Department at Emons Group B.V.

Elst, S. van (2021) The usability of generative adversarial networks for automatic segmentation of lung nodules in CT-images.

English, T. F. (2021) Using Artificial Intelligence for Image Classification of Ships.

Fang, Zhuowen (2021) HejVR: a Virtual Reality online cultural learning system.

Feij, T.M. (2021) The Designer's Shift: Using past industrial revolutions to explore how the fourth industrial revolution changes the field of industrial design.

Ferdelman, Kai (2021) Using computer vision to aid navigation for people with visual impairements.

Fernandes, B.O. (2021) Exploring possibilities in interactive technology to create cross-domain interactive breathing exercise games.

Francis, Carolynn (2021) Interactive system for rhythmic synchronisation.

Geißler, Dominique (2021) Gender Bias in English and German Children’s Literature: A Computational Analysis Using Word Embeddings.

Giesen, Jitse (2021) Investigations into the use of a radiofrequency needle as temperature sensor using photoacoustics.

Gouweleeuw, K. (2021) Using Neurophysiological Signals to Measure Social Exclusion Induced by a Language Barrier.

Grift, Rasmus van der (2021) Development of finger vein phantoms with realistic finger vein patterns.

Groenenberg, Annabel (2021) Three Dimensions to See it All in One Position : the development and clinical usability of a real-time depth-based markerless navigation system for hologram-guided surgery on the Microsoft HoloLens 2™.

Groeneveld, J. (2021) The impact of motor learning paradigms on smart sport exercises.

Gupta, Y. (2021) Aspect Based Sentiment Classification of Multilingual Customer Reviews.

Hag, G.A. ten (2021) Insertion of an inducible construct in the genome of human pluripotent stem cells by CRISPR-Cas9 mediated homology directed repair.

Harbers, J.W.B. and Huberts, M. and Rooy, E.A. van and Ruiter, A.T. (2021) Post-prandiale glucoserespons van insuline-afhankelijke patiënten met Diabetes mellitus type 2 : een individuele benadering op de behandeling.

Heinsius, L.R. (2021) Real-Time YOLOv4 FPGA Design with Catapult High-Level Synthesis.

Hesselink, Janis Ole (2021) Does Psychological Capital have an Impact on Effects of Exposure to User Generated Instagram Content on Well-being?

Heuvel, D.M. van den (2021) Data-driven logistics : improving the decision-making process in operational planning by integrating a supervised learning model.

Hiep, M.A.J. (2021) Tracked ultrasound for patient registration in surgical navigation during abdominal cancer surgery.

Hillebrand, Manouk (2021) How to effectively communicate brain stem cancer to a child patient.

Holland, Mark van (2021) Control methods and architectures for aerial manipulators in physical interaction with humans.

Holleboom, Minke (2021) Respiratory muscle physiology during assisted mechanical ventilation from a technological view.

Holm, L. (2021) Exploratory Research Into Accurate And Consistent Resistivity Measurements Of Highly-doped Silicon At High Temperatures.

Imholz, D. and Krimpen, L. van and Stindt, T.D.A. and Kessel, A.A.M. van (2021) De BiPAP A40 EFL voor bestrijding van expiratoire flow limitatie bij COPD-patiënten.

Jager, Joris (2021) Experiencing the impact of food choices through a playful, interactive supermarket environment.

Jakkan, Shiva (2021) Designing a framework to develop capabilities for adopting AI/ML technologies in the supply chain.

Jansen, J. (2021) Control of soft robotic knee brace treating ACL lesion using iterative learning.

Jiacheng, Liao (2021) A3AO interactions on large screen.

Jong, J.I. de (2021) Dynamic modelling of the physiology of breathing to improve mechanical ventilation.

Juurlink, J.A. (2021) Line layout and assembly line balance proposal to reduce output loss due to long trucks at Scania.

Kelder, R. (2021) Active Vibration Isolation with an Active Stage.

Klaas, Ruben (2021) Minimizing the internal costs for the new battery container at Company X.

Klein Rot, J.E. (2021) Evaluation of a Force Controlled Pneumatically Actuated Knee Orthosis.

Kloosterman, M. (2021) An explorative study into the possible relationship between electrical and structural abnormalities in subclinical and clinical PKP2-pathogenic mutation carriers by body surface potential mapping and echocardiographic deformation imaging : "Towards early detection and risk stratification of arrhythmogenic cardiomyopathy”.

Knipscheer, B. (2021) Fusion of EEG and MEG for the Localization of High Frequency Oscillations in Focal Epilepsy.

Knoben, P.A.H. (2021) Software caching for tree-based algorithms on accelerator cards.

Kock, G.J. (2021) Performance evaluation of several SLAM algorithms in a feature-based vSLAM framework.

Kok, L.W. (2021) Modelling the total cost of ownership of stock materials at VDL Energy Systems.

Kool, Danien (2021) Prenatal prediction of the postnatal prognosis in Congenital Diaphragmatic Hernia patients Based on ultrasound and additional MRI.

Kraai, T. (2021) Incident End Time Prediction During the Incident Recovery Process.

Kraakman, J. (2021) Inhibition of mobile phone cameras.

Krol, Zanur (2021) A new approach to visualizing FMEA data.

Lakhlifi, Nabil (2021) The opportunities of drone technology in food delivery services.

Lange, Arthur de (2021) Exploring and enhancing the possibilities and performance of a low-field tabletop MRI scanner.

Langerak, N.C. (2021) Towards real-time endoscopic verification of lung lesion by bio-impedance measurements to improve biopsy accuracy.

Lempers, Timo (2021) Educating the public about the safety of Contact Tracing Apps.

Lennartz, J. (2021) Transition to a sustainable economy through product life cycle governance Development of a governance tool to support companies in the environmental transitions.

Looijenga, Wouter (2021) Bicycle Accident Prevention using Sensors and Automotive Systems.

Luiten, Simone (2021) Improving the experience and engagement of museum visitors by means of EEG and interactive screens.

Láoh, S.F. (2021) Improving the results of an RCA+ through the use of a template.

Man, J.P. (2021) Robotic assisted open cranial vault reconstruction for craniosynostosis.

Manen, B.T. van (2021) Learning to explore and map with EKF SLAM and RL.

Martens, M. (2021) Adoption and implications of CBDC : an agent-based modelling approach.

Massa, M. (2021) Detection of dysfunctional breathing and uncontrolled asthma in children using respiratory sound recordings.

Materne, L.J. (2021) Is electric vehicle drivers’ cognitive workload increased by eco-driving feedback in the face of range anxiety?

Maximova, A. (2021) Lifestyle games are not only for people with obesity.

Meijer, S.D. (2021) The implementation of LiDAR-based traffic detection and tracking.

Meijer, T.G.J. (2021) Improving the tactical planning process to stabilize the workload.

Meyknecht, N.C. (2021) Dynamic RTI Repositioning with IoT Technology.

Midden, J.H. van (2021) Using process mining and event log analysis for better business strategy decision-making.

Moens, L.L. (2021) Ready for Takeoff? : The Application of Human Readiness Levels (HRL).

Morrenhof, M.A. (2021) Using mathematical modelling to create a driver schedule while taking scheduling restrictions into account.

Nadar, Deenalakshmi (2021) Manufacturing Facility Layout Design and Performance Analysis for a Greenfield Project using DES and AHP : A Multi-Criteria Decision Making for Qualitative and Quantitative parameters.

Nannings, L.F.J. (2021) Vibrating socks as a home-based tactile cueing device in Parkinson’s Disease.

Nassi, Thijs-Enagnon (2021) Algorithms for Automated Scoring of Respiratory Events in Sleep.

Nguyen, Elisa (2021) Temporal Spike Attribution : A Local Feature-Based Explanation for Temporally Coded Spiking Neural Networks.

Niekolaas, M. (2021) Towards real-time placental surface reconstruction during fetal surgery : deep-learned placental vessel identification and segmentation.

Nijhuis, C.G. (2021) Analyzing the production capacity of Company X.

Nijhuis, M.C. (2021) Tactical planning to facilitate patient self-scheduling.

Noort, L.M. van (2021) Pain scales in monitoring functional recovery of patients with hip fractures.

Obdeijn, I.V. (2021) APTw imaging in paediatric brain tumours: no waste of time and energy : Assessment of precision and feasibility at 3T and 7T MRI.

Okken, Boi (2021) Design and Development of a Magnetic Non-linear Elastic Element and Control for Progressive Series Actuation.

Oosterhout, J.J. van (2021) The influence of national hospital volume standards on regional tumor networks using social network analysis.

Oosterloo, M.J. (2021) Predicting the required public charging capacity for electric vehicles in Zwolle.

Overmars, D.M. (2021) Modelling uncertainty in a configurable environment : a case study at Pan Oston.

Pausan, Florin (2021) Designing a customizable product lifecycle management system for an SME to reach data singularity.

Pavert, J.E.M. van de (2021) Morphing detection using local spectra.

Pelgröm, A.T. (2021) Breathing patterns of asthma patients during cycling ergometry.

Pigmans, R.R.W.P. (2021) The forced oscillation technique: A new lung function monitoring technique in infants requiring respiratory support. From bench testing to clinical implementation.

Pol, E. van den (2021) What will be the effect of different ambience conditions on the accuracy of balance recovery measurements using a camera based system.

Post, L.J.M. (2021) Methodology Development for Cycle Packaging : creating a method and corresponding software for a logistical problem within VDL ETG Almelo.

Post, N. (2021) Workload balancing of the Plastic Surgery Department.

Quinatoa, Michael (2021) Techno-Economic Feasibility of an Electric Transition for Fuel/Gas Stations.

Raat, F.M. de (2021) Accuracy and precision of stroke volume and left ventricular ejection fraction quantification with handheld echocardiography.

Rali, S.K. (2021) Wearable coach for symmetric walking.

Rienks, L.J. (2021) Characterization of chemotherapy and sarcoidosis induced peripheral neuropathy through combined nociceptive detection thresholds and brain responses.

Rijswijk, R.E. van (2021) Predictors of Abdominal Aortic Aneurysm Sac Remodeling after Endovascular Repair: Consolidating & Complementing Evidence.

Roelink, Daniël (2021) Improving the batch handling of the container-series line at Easy Sanitary Solutions.

Saiz Montilla, Marcos (2021) Developing a decision-support framework to advise companies in the planning of product configurators that can let the end user engineer-to-order the final product.

Salim, H.S. (2021) Mixed reality liver puncture.

Sambeek, W.F.J.H. van (2021) Supply chain supporting build-to-print products in a small manufacturing company.

Sanz González, Ernesto Luis (2021) Production lead times analysis at Vernay.

Sathiyanarayanan, Prasanna (2021) Data Driven Feedforward Control of a 2-DOF Redundantly Actuated Manipulator with Flexure Joints using Machine Learning Techniques.

Schepop, L. van de (2021) Versatile microfluidic circulation to valuate tumor cross-talk using a multi-organ-on-chip approach.

Schneider, H.J.L. (2021) The accuracy of a FEM model in predicting phantom deformation.

Scholte Lubberink, D.L. (2021) A Multiple-Case Study on the Future of Roles and Competencies: Purchasing, Logistics, Marketing, and HRM.

Schutte, G.D. (2021) The Digital Transition of Manufacturing : The gathering and visualization of real-time data and historical data to monitor, control, and improve manufacturing performance.

Shametaj, P. (2021) Positioning and orientation control of a needle-insertion MRI compatible medical robot based on ROS using visual feedback.

Singh, A.N. (2021) Smart Control of MR safe Pneumatic Stepper Motor.

Sleuwen, Meike van (2021) The development of automated ECG analysis purposes and its validation and implementation into clinical practice.

Slooten, Janiek van (2021) Thermoelectric properties of vertically aligned nanocomposite films.

Smellink, E.M.L. (2021) Improving ordering and acquisition of learning resources.

Smoorenburg, Joost van (2021) Using mixed-reality in biopsy of lesions inside deformable organs.

Snoeijink, L.H. (2021) Room temperature characterization of DopantNetwork Processing Units. And optimization of the measuring process.

Sprang, Angela V. van (2021) Path and Trajectory Planning by Model Predictive Control in Autonomous Racing.

Sridharan, H. (2021) Development of multiple needle holder for irreversible electroporation treatment.

Steenis, E.M. van (2021) Clustering and source localisation of interictal epileptiform discharges in scalp EEG and design of an interface for the clinic.

Stoffels, R.H. (2021) Item availability restricted.

Strijker, H.W. (2021) Ethernet implementation in Clash.

Stuiver, S (2021) Electroencephalography characteristics in patients with major depressive disorder receiving electroconvulsive therapy.

Sturm, Hanna .E (2021) Preventive maintenance and inventory model using failure rates.

Sundarapandian Raani, V. (2021) Modeling and analysis of board games.

Tas, J.G.A. van der (2021) Developing a prescriptive IT architecture maturity model (ITA-MM).

Teoh, Timothy (2021) A simulation based layout optimization study for production facilities.

Teunissen, T. (2021) Developing an Agile Digital Transformation Maturity Model and Assessment Instrument.

Tjepkema, W.W.A. (2021) Design of a surgical manipulator using smart materials.

Toapanta, Danilo (2021) Investigation of ranging capabilities with Bluetooth Low Energy : how can we effectively estimate the range between a (commercial off the shelf) BLE beacon and a BLE receiver (locator)?

Togtema, M.H. (2021) Nerve Fiber Modelling for Improved Understanding of the Electrocutaneous Interface in the Context of Pain Diagnostics.

Uijlen, Rick L. (2021) Appointment insertion in home care scheduling.

Vaassen, H.G.M. (2021) Intraoperative Quantification of Intestinal Microcirculation : A Modern Interpretation of Fluorescence Angiography.

Vacariu, P. (2021) PIRATE Robot Autonomous Navigation through Complex Pipe Networks using Reinforcement Learning.

Vashistha, G. (2021) Robot assisted needle positioning system for liver biopsy.

Veen, D.W.A van der (2021) Creating water consumption awareness with a data physicalization.

Venhuizen, R.N. (2021) Ritme+ a tangible task alarm.

Vette, S.P.M. de (2021) MR image biomarkers of the parotid gland stem cell rich region to predict xerostomia after radiotherapy.

Vollebregt, Janneke (2021) Exploring including ergonomics in the assembly line balancing process: a test case.

Voorend, R.W.A. (2021) Deep Unsupervised Representation Learning For Animal Activity Recognition.

Wamelink, Ivar J.H.G. (2021) Prediction of Immunotherapy Outcome in Melanoma Patients with Brain Metastases.

Wattel, N.J. (2021) Routing of shunt trains at logistics hubs of NS using constraint programming.

Weert, T. van (2021) An awareness campaign regarding energy consumption for the UT-community.

Westerink, Milan (2021) Online Operational Planning in a Multi-Provider Ambulatory Allied Healthcare Organisation : developing an online appointment scheduling support procedure employing predictive modelling of location occupancy.

Westerveld, C.E. (2021) Generative Design : recommended actions to smooth the way for production of generative designs with additive manufacturing.

Westra, Ilse (2021) Feedback in Virtual Reality Rowing.

Wieringa, J.K. (2021) Bot for continuing airworthiness : proof of concept for passenger carrying drones.

Wijk, M.W.M. van (2021) Optimized MRI techniques for image-guided holmium-166 SIRT.

Wijnands, M.P.J. (2021) Explaining black box decision-making : adopting explainable artificial intelligence in credit risk prediction for P2P lending.

Woerd, L.G. van der (2021) Adhesion of cardiomyocytes on functionalized lipid bilayers.

Wolfkamp, T.J.H. (2021) Optimization of the high consumption logistic process at Scania Production Zwolle.

Wu, Sheng Chih (2021) Generation of Lung CT Images Using Semantic Layouts.

Yeung, T. (2021) Using virtual reality for a controlled evaluation of a haptic navigation wearable for people with a visual impairment.

Zagers, D.A. (2021) Aortic remodeling after endovascular aneurysm repair.

Zentveld, B.N. (2021) Optimising the batch sizes and inventory parameters for Twentsche Kabelfabriek BV.

Zondag, ir. M. (2021) You get the best of both worlds! sEMG to knee torque mapping using (hybrid) neuromusculoskeletal modelling and machine learning.

Zwiep, L.G.H. (2021) Mechatronic solution for stress-wave generation using impact echo.

Zwier, P.J. (2021) Routing and appointment planning optimization for medication at home: A case study in Isala hospital.

Zwiers, R.J. (2021) A modified cheapest insertion heuristic for the multi-objective pickup and delivery open VRP with time windows for a homogeneous fleet with heterogeneous freights : a case study.

2020

A.B., A.B. and Kruif, L.J. de and Lubbers, N.S. and Perez y Perez, J. (2020) De bijdrage van holmium-microsferen en (U)SPIONs bij het aantonen van lymfekliermetastasen bij longkankerpatiënten.

Abbing, J.R. (2020) Semantic segmentation of minimally invasive anti-reflux surgery video using U-NET Machine Learning.

Ahlemeyer, Jan-Luca (2020) Item availability restricted.

Aminian, Roozbeh (2020) Wat-IF : decision-support tool for sustainable wastewater treatment plants in the Netherlands.

Arends, Jim (2020) The feasibility of transforming the Dutch main- and regional natural gas pipeline infrastructure into a hydrogen network.

Arts, L.A.P. and Buijs, H.R. and Florax, A.A. and Teernstra, M.A. (2020) Het operationaliseren van functioneel herstel voor continue monitoring met behulp van draagbare sensoren bij ouderen vanaf zeventig jaar tijdens het revalidatieproces na een heupfractuur.

Aslam, Suhaib (2020) Designing a ubiquitous artifact for enhancing the digital wellbeing of smartphone users.

Bardsen, K.T (2020) From Quantified Self to Qualified Self: Creating a Happier User.

Behr, C.M. (2020) Headroom analysis and systematic review for big-3 screening.

Berg, J.L. van den (2020) An interactive visualization explaining probabilistic fault tree computations.

Berg, S.H.M.P. van den (2020) Co-designing a self-compassion application for newly diagnosed cancer patients with a focus on sustained use.

Bergsma, Sascha (2020) Multimodal virtual rowing coach.

Bijsterveld, D.G. (2020) Using a Thermal Flow Sensor as a Thermal Conductivity Sensor.

Bistolfi, I.M.F. (2020) Virtual reality tool for teachers.

Boerman, D.A. (2020) Reporting on Cybersecurity Performance.

Bondt, M.R. de and Greveling, M.J. and Weijzen, F.I. (2020) Item availability restricted.

Bosdriesz, Laura (2020) Adding Speech to Dialogues with a Council of Coaches.

Bouwmeester, J. and Kouwenhoven, M.C.J. and Veen, K. van der and Visscher, A.D.I. (2020) Voorkomen van failure to thrive in baby's met een congenitale hernia diafragmatica; Een voorstudie naar het objectiveren van ademarbeid met behulp van elektromyografie.

Brands, Kirsten (2020) Improving Material Availability using a Control Tower for Service Tools.

Bravo Cabrera, Miguel Angel (2020) Development of an advanced control module for context-aware upper-limb prostheses.

Broeze, G.M. and Everink, S.R.T. and Rijntjes, J. and Zwaan, J. van der (2020) Een 3D-vergelijking van SAFIR-voorspelde thermische leverablaties met postablatieve CT-beelden bij levertumoren.

Buis, G. (2020) Reasons for investment holdback in robot arm solutions at medium-sized organizations in the food industry.

Buitenhuis, L. (2020) Design and evaluation of a walking and running controller for an actuated knee prosthesis.

Cantón García, Pablo (2020) User-centred design for team mood : the design of a digital dashboard.

Chen, Xinyi (2020) Data driven solution to predictive maintenance.

Chen, Zhiyuan (2020) Automatic detection of photographing or filming.

Cârcoană, Sebastian (2020) Assessing the implementation of ultrafiltration in a Brazilian kraft pulp mill.

Dai, Yinping (2020) Modelling the LIFE project using DEMKit.

Dalen, Emese van and Loosveld, Linda and Schepers, Laura and Schild, Edmée (2020) Uitbreiding van het neural mass model met adaptatie : de invloed van adaptatie op het ontstaan van insulten bij corticale stimulatie.

Defize, D.R. (2020) Developing a Maturity Model for AI-Augmented Data Management.

Deinum, S.W. (2020) Developing an augmented reality pipe fitting tool.

Dekker, K.J. (2020) Maintenance Optimization Through predictive Maintenance: A Case Study For Damen Shipyards.

Denekamp, H.J. (2020) Strategic capacity planning with workforce flexibility to deal with seasonal and variable demand : a case study in the agriculture sector at Company A.

Dhau, Khansa Irsalina (2020) Optimal Integration Strategies for a Green Tiny House Energy System.

Dijkgraaf, F.L. (2020) Redesigning the supply chain to increase responsiveness with increasing demand uncertainty.

Dijkstra, C.G. and Eikholt, A.A. and Heiligenberg, J. van den and Vries, B.M. de (2020) Een nieuwe applicator ter optimalisatie van de stabiliteit en positionering van de laser-fiber tijdens photodynamische therapie van tumoren in de sinonasale ruimte.

Dollen, R. (2020) Observing Electrical Brain Responses during Processing of Nociceptive Stimuli around the Detection Threshold combined with a Cold Pressor Test.

Drijfhout, S.H. (2020) Improving eSports performance : conducting stress measurements during Fifa gameplay.

Droogsma, T. (2020) Detecting airflow leakage in home spirometry : using metaphors for children.

Eleveld, N. (2020) Near-Infrared Spectroscopy and Transcranial Doppler Sonography for the estimation of Cerebral Autoregulation after Intra-Arterial Thrombectomy for Ischemic Stroke.

Endeman, Kirsten (2020) Improving product obsolescence control at Koninklijke Grolsch.

Esselink, F.S. (2020) Optimization of the Laser-Assisted Tape Winding process using an Inverse Kinematic-Optical-Thermal model.

Fopma, Remmelt (2020) Item availability restricted.

Galen, J.A.N. van (2020) Setting up circularity objectives to structurally implement circular construction.

Gankema, R. (2020) The bigger picture : optimizing material availability in a contract assembly setting.

Gefferie, S.R. (2020) Observing small fiber dysfunction using nociceptive stimulus detection and evoked potentials.

Georges, MaryCaroline (2020) Extinguishing the Use : implementing Virtual Reality in substance use disorder treatments for patients with a mild intellectual disability or Borderline Intellectual Functioning.

Georgiadis, N. (2020) Mid-term projections towards the water, energy and agriculture nexus in Jordan.

Gerlagh, B. (2020) Energy-aware adaptive interaction control using offline task-based optimization in an impedance control framework.

Grasselli, I. (2020) Exploring the design space of e-detailing through Magic Machine workshops to advance technologies for desirable futures.

Grefte, L.J.L. (2020) Autonomous navigation of the PIRATE using reinforcement learning.

Groot, D.J.A. de (2020) Conceptual design of a microfluidic-based platform for medical diagnosis.

Groot Lipman, K.B.W. (2020) Artificial Intelligence driven assessment of asbestos exposed patients.

Haan, Job S. de (2020) Standardised, automatic description of uroflowmetry curve shapes.

Haandrikman, BEng. Robin (2020) Predicting failure modes of traffic control systems by classifying unstructured data of maintenance requests.

Haas, A.N.J.P.M. (2020) Attitudes towards digital transformation at small enterprises : A cross-border analysis.

Hamelink, I. (2020) Towards the introduction of magnetic resonance guided stereotactic body radiotherapy for the treatment of prostate cancer.

Harbers, J.J.G. (2020) Improving production planning for a food processing company.

Hasper, Marvin and Gourie, Orkino (2020) Tekstboek uitkomst na CABG : een nieuw hulpmiddel om de kwaliteit van een coronaire bypassoperatie te meten.

Hendriks, K.J.H. (2020) Towards reducing the sample complexity of a model-free reinforcement learning agent controlling a single segment tendon-driven continuum manipulator.

Hendriks, Koen (2020) The improvement of objective milkfoam quality analysis through image processing and computer vision.

Hester, Lonneke and Kikkert, Eline and Kim, Lucia and Uum, Esmee van (2020) Het ontwerpen van patiëntspecifieke 3D-geprinte snijmallen op basis van MRI-Beelden voor gebruik bij septale myectomie van HOCM.

Hetterscheid, K.J.T. (2020) Detecting agitated speech : A neural network approach.

Heus, Steven de (2020) Designing and Evaluating an Educational Board Game.

Hobert, E.C. (2020) Integrating Energy Awareness into Sequence Control.

Hofmeijer, E.I.S. (2020) Machine learning and deep learning for better assessment of the Big-3 disease in healthcare.

Hofstede, A. (2020) Integration of hard and soft real-time tasks in cyber-physical systems.

Hofsteenge, M. T. (2020) Convolutional autoencoders to process 4D gynaecological data.

Hollander, K.J.C. den (2020) Evaluation of the structured design method on discrete-events in cyber-physical systems.

Horstink, S.F. (2020) Funnel cruise control with input saturation.

Hottenhuis, W.G. (2020) Improving inventory management in a highly volatile market.

Huijts, Joep W. (2020) Developing a measurement item to assess the Smartness of Cities across the world.

Huisintveld, B.A. and Oosterhout, L.E. van (2020) Activiteitenmonitoring in de bariatrische populatie : een review.

Hunt, I.Y.S.E. (2020) Kelvin's thunderstorm.

Huntelaar, M.J. (2020) Item availability restricted.

Hélant Muller, C. (2020) The effect of direction and fatigue while running on an athletic track on kinematic inter-limb difference.

Jansen, A.S. (2020) Measuring vasomotor response in abdominal aortic aneurysm patients : a cool innovation toward cardiovascular event prediction.

Jong, S. de (2020) Arduino toolkit for the control of pneumatically actuated wearables.

Jung, Annkatrin (2020) The Breathing Garment - Exploring Breathing-Based Interactions through Deep Touch Pressure.

Kaptein, J.A. (2020) Gold nanoparticles for biosensing.

Karremans, S.N. and Kock, B.C.M. and Kormelink, I.M. and Ribbens, V.J. (2020) A proposal for an in vitro setup to test microbubbles combined with ultrasound as an improvement of the current therapy for patients with infected diabetic foot ulcers.

Kerimov, Emil (2020) FPGA-based AES variants against side-channel attacks.

Klok, M.E. and Fuente, P.A. de la and Somberg, E.L. and Reuvekamp, M.I. (2020) Non-invasieve bepaling van atriale geleidingseigenschappen bij patiënten met verdenking op atriumfibrilleren: Een review van beeldvormende technieken.

Kok, M.R. (2020) Biologically Realistic Artificial Neural Networks.

Koomen, S.B. (2020) Esports performance : A dashboard proposal.

Kosmas, Dimitrios (2020) Model-Based hysteresis compensation and control with 3D printed lousy sensors.

Krishnakumar, Sanchana (2020) Improvement of OpenSim model for the estimation of lumbar torques via EMG-driven modelling.

Kuipers, Charline (2020) Improving the diagnosis of crystals in synovial fluid by combining Raman spectroscopy with polarization microscopy.

Lammers, B. (2020) VR-based visual model mediated telepresence using a SLAM generated virtual model.

Lankheet, S. and Pieterse, M.M. and Rijnhout, R. and Tuerlings, E. (2020) Item availability restricted.

Lansink Rotgerink, F.K. and Slotman, E. (2020) Patient perspective on telemonitoring and implications for implementation.

Laven, I.E.W.G. (2020) Evaluating the preoperative planning and improving the surgical technique of medial opening wedge high tibial osteotomy.

Leliveld, N.L. (2020) Model of a flow-shop with order dependent sequencing to experiment with capacity and priority rule changes.

Lerink, C.W. (2020) Visualisation of fouling during oil-in-water filtration using tubular ceramic membranes.

Leunissen, Ir. Anouk (2020) Estimation of the Centre of Mass Position, Linear Momentum, and Angular Momentum of a Human Wearing an Exoskeleton.

Lok, R.M. (2020) Reducing loneliness among elderly with decreased mobility using technology.

Lomillos Rozeboom, I. (2020) Beamforming performance evaluation with impact of user model electric properties.

Loos, B. (2020) Designing a smartphone application for supporting the COMET-program in mental health care.

Luijten, Gijs (2020) Holographic augmented reality in deep inferior epigastric perforator flap breast reconstruction.

Macarie, M. (2020) DNS bitsquatting in the wild.

Manjesh, M. (2020) Deterministic modelling and parameterization of height-dependent interaction between radio waves and human body.

Martikainen, Katariina (2020) Audio-based stylistic characteristics of Podcasts for search and recommendation : a user and computational analysis.

Mathivanan, Rajavarman (2020) Texture Based Autonomous Reconstruction of 3D Point Cloud Models using Fully Actuated UAVs.

Maškanceva, Laura (2020) Developing understandable and actionable sleep data visualizations.

Meulenbrugge, Erik-Jan (2020) Enhancing interictal discharge detection via a deep learning approach.

Mirwani, Yash (2020) Redesign of the PIRATE robot.

Mohamed, Marwan (2020) The future of the green hydrogen production from offshore energy systems in accelerating the energy transition : analysis in the Dutch context.

Moormans, L.R. (2020) Standardization of offloading devices for the treatment of diabetic foot ulcers by 3D printing.

Mulder, M.P. (2020) Machine learning classification of circulatory shock on the ICU using arterial waveforms.

Munsterman, Roxane and Hendricks, Jessie and Zutphen, Robin van and Karstanje, Eline (2020) De invloed van discretisatie op het classificeren van tumorheterogeniteit : voorspelling van de respons op neo-adjuvante chemoradiotherapie op basis van de tumorheterogeniteit bij een curatief behandelbaar oesofaguscarcinoom met behulp van radiomics.

Nass, Mathieu (2020) Wi-Fi based range-only constraint integration in RTAB-Map.

Nateshan, A.V. (2020) Investigating the application of inductive wireless power transfer in real-world drone charging.

Nguyen, M. (2020) Interaction technology in improving learning of sports tactics : A novel way of teaching adult novice players the volleyball side-out rotation with an interactive LED floor.

Nieuwmeijer, L.F. (2020) Using Mixed Integer Linear Programming for providing insight into structural improvements in the production planning process at a food production company.

Nijenhuis, Bart (2020) Electric vehicle charging in the Dutch low-voltage grid.

Nijenhuis, W.J.G. (2020) The resistive-pulse technique as a method for determining spermatozoa morphology.

Pompe, B.L. (2020) Robot applications for elderly care.

Poot, Martijn (2020) Real time posture tracking using Breathline : posture , body position and movement classification using an Arduino, accelerometer and k-Nearest Neighbour classification.

Post, Leander (2020) Piecewise linear landmark mapping for pose normalization.

Praas, J.W. (2020) Predicting influence spread in online social networks using combinations of node centralities.

Ragalmuto, Fabyen (2020) Visual Working Memory for sizes and orientations.

Redonet Klip, T.H. (2020) Monitoring crowd dynamics by passively sniffing cellular traffic.

Rendering, C. (2020) Research and conceptual design of a new user-driven fall detection concept for older adults.

Ridder, L. de (2020) Integrating sustainability in product development through a strategy framework and supporting toolkit.

Rodriguez, C.J. (2020) The design and simulation of an active force control architecture for an electric drive for an active knee prosthesis.

Roelofsen, E.G. (2020) Old school or new school? : exploring the effect of gamification elements within an Augmented Reality application on students’ motivation when performing an assembly task.

Ruisch, Janna (2020) Disease-specific electrocardiographic lead positioning for early diagnosis of arrhythmogenic right ventricular cardiomyopathy : to improve early diagnosis in plakophilin-2 pathogenic variant carriers.

Saksena, Saumya (2020) CABiNet : Efficient Context Aggregation Network for Low-Latency Semantic Segmentation.

Sambeek, W.F.J.H. van (2020) Drone technology maturity and implications in security surveillance sector.

Schaafsma, N. (2020) From Quantified Self to Qualified Self, the benefit for DM2 patients.

Schell, Alfred (2020) Vision-based guidance for robot assisted endovascular intervention.

Schipaanboord, D.J.M. (2020) Non-invasive electrocardiographic imaging in patients with idiopathic ventricular fibrillation : number and placement of body-surface electrodes for the assessment of epicardial repolarization.

Schoneveld, J. (2020) Augmented reality photo album for people with dementia.

Shah, Nimish (2020) 3D Stereovision for Quantification of Skin Diseases.

Sharma, S. (2020) Implementation of 3D technologies for quantification and improvement of clinical diagnostics.

Sievers, C.T. (2020) Bag-of-words location retrieval : Including position of local features.

Sligting, N.G. (2020) Reducing the passenger hindrance on snowy winter days by prioritizing switch failure repairs.

Slutter, Max (2020) Exploring the brain activity related to missing penalty kicks: an fNIRS study.

Smeekes, B. (2020) Decision support for barge planning at Combi Terminal Twente.

Smit, J.J. (2020) Predicting intracranial hypertension in acute traumatic brain injury patients.

Stroop, B and Bult, T.J. (2020) New European quality indicators on breast cancer calculated for the Dutch setting.

Tersteeg, Stefan (2020) Autonomous driving the pirate robot.

Tokarczyk, F. (2020) Predicting overcrowding in the acute care domain using random forest regression.

Tuinman, BSc Philippe (2020) Enthusing Young Secondary Schoolers for Informatics Education.

Twilt, J.J. (2020) Optimization of real-time imaging sequences for MR-guided percutaneous needle interventions with implementation of MR-simulations.

Umrani, A.J. (2020) 3D printed calorimetric flow sensor.

Veldhuis, N. (2020) The impact of an increased frozen scheduling interval on the supply chain of HEINEKEN Netherlands Supply.

Velze, B.S. van and Glastra, F.E.H. and Pauli, M. and Berg, L.J.J. van den (2020) Item availability restricted.

Verhulst, Marlous (2020) Neurological outcome prediction of comatose patients after cardiac arrest based on EEG, brain MRI and optic nerve ultrasonography.

Vidulejs, V. (2020) Waveguiding for CMOS based optocoupling.

Vogelzang, Kevin (2020) Development and evaluation of a safe Fall Controller for a Lower Limb Exoskeleton using reinforcement learning.

Waardt, Martin de (2020) Spatial adoption patterns of residential heat pumps and their impact on the grid.

Westerveld, J.P. van (2020) FPGA partial reconfiguration and automatic variant generation as a side-channel attack countermeasure with functional HDL Clash.

Weustink, T. (2020) Forecasting promotional demand in the FMCG industry.

Wiggers, KM (2020) The Physicalization of Risk Models.

Wijbenga, Nynke (2020) Ultrasound volume sensor for intravascular volume status: Clinical and technological feasibility.

Wijk, BSc. Cedric F.C. van (2020) Design of a Small Wind Turbine Rotor and Hub for Wind Tunnel Testing.

Wijk, R.F.O. van (2020) Design of a Small Scale Wind Turbine Nacelle and Tower for Wind Tunnel Testing.

Winderlich, Verena (2020) Game Induced Exercise Promotion for Children with Developmental Coordination Disorder.

Zanten, G.J. van (2020) Facility design to improve the internal logistics at Van Gerrevink.

Zanten, S. van (2020) Item availability restricted.

Zavrnik, S. (2020) Mixed reality conceptualization and prototyping.

Zorba, Walid (2020) Cost and risk-reduction benefit of hedging inflation risk for Dutch defined-benefit pension funds.

Zult, J.D. (2020) Achieving Stable and Safe Physical Interaction for a Fully Actuated Aerial Robot using Energy Tank-Based Interaction Control.

2019

Ahrens, Justin (2019) The Value of Intelligent Vehicles for Marketers and Consumers.

Amtsfeld, Jonas (2019) An assessment of wind power forecasting models and its financial implications for the traders.

Ankersmid, Jet Wies (2019) The Effects of the Philips Audio Neurofeedback System on Sleep.

Antonides, L. (2019) Improving the on-time delivery performance at PM.

Attema, Klaas-Jan (2019) Exergames: Portable and Enjoyable.

Aursulesei, Andrei (2019) Noise canceling methods in power inverters.

Baars, L.A.C.P. (2019) On determining a minimum and maximum arrival rate to decrease overcrowding at a nursing ward.

Bakker, J.R.P. and Goris, L.C. and Kortman, M.C.P. and Vos, R.G.J. (2019) Improving the treatment of HOCM: The investigation of a patient specific cutting mould and a 3D printed heart.

Baltus, S.C. and Kar, N.E. van de and Spijkerboer, K.G.P. and Teule, E.H.S. (2019) A comparison between iDose4 and IMR on the amount of blooming in a CT-Angiogram of patients suffering from peripheral arterial disease in the aortoiliac tract.

Bax, E.A. and Matser, I. and Miessen, L.L. and Schoonbrood, M.J.P. (2019) Het ontwerpen van een nomogram gebaseerd op echo-MR-fusie biopsie dat de kans op een klinisch relevante lymfeklierdissectie voorspelt bij patiënten met een verdenking op lymfekliermetastasen ten gevolge van prostaatcarcinoom.

Beek, L. R. van (2019) An algorihm for the bay placement of intermodal containers.

Beening, R.F.L. (2019) Gamification as a motivational tool in a diabetes lifestyle coaching application.

Bemthuis, T.J. (2019) Dynamic three-dimensional resource space allocation in a multi-item inventory environment.

Berfelo, T. (2019) Electrical brain responses during processing of nociceptive stimuli around the detection threshold.

Bergmans, R.H.J. (2019) Computer-aided diagnosis for CT based clinical triage of ischemic and hemorrhagic stroke patients : a deep learning and quantitative image analysis approach.

Berkel, A.R.R. (2019) Integration of clinical decision support systems in Dutch radiology departments.

Bhagubai, Miguel M. C. (2019) Quantifying pathological synergies in the upper extremity of stroke patients with the use of a multisensory system.

Binnekamp, C.W. and Dijk, H.H. van and Heggeler, R.M. ten and Verlaan, P. (2019) Nut en noodzaak van Cirkel van Willis bepaling bij interventie carotisstenose.

Bock, E.J.E. de and Braak, K. van and Everts, B.R. and Weezel, G.J.W. van (2019) Fantoomvalidatie van 3DMaMa: een nieuwe methode voor gerichtere nabehandeling van borstkanker bij positieve snijvlakken.

Boer, E.C. de (2019) Monitoring the diaphragm in critically ill patients using electromyography : interpreting the EAdi signal and quantifying patient effort.

Boerrigter, T.H. (2019) Increasing the throughput at insulating and degassing medium voltage cables.

Bongers, Twan (2019) Identification of pelvic floor features in ultrasound images using an unsupervised machine learning algorithm.

Bosch, Y.J. (2019) Multi-Kettle Beer Brewing : Production planning at Hops & Grains. Researching the viability of the “Second Craft beer Revolution” through simulation of production processes.

Bossink, K (2019) Feasibility of an Automated Offline Repacking Solution at Grolsch.

Braak, T.P. ter (2019) Development of a 3D navigated surgical cutting guide.

Braakman, H.G.D. (2019) Magnetic field sensing on 3D-printed structures.

Braem, C.I.R (2019) The Philips wearable biosensor in transcatheter aortic valve implantation treatment workflow. Usability and feasibility of the wearable biosensor.

Breed, I (2019) Hierarchical forecasting of engineering demand at KLM Engineering & Maintenance.

Brugman, G.G. (2019) 3D reconstruction with Kinect to evaluate neck lymphedema.

Brunetti, M. (2019) Applying simulation to wind rotor blade manufacturing: process alignment in an international environment.

Burgers, T. (2019) Epididymis-on-a-chip device : a unique approach to study tight barriers in the human male reproductive system using ex vivo tissue.

Burgt, A. van de (2019) Experimental validation of absolute SPECT/CT quantification for response monitoring in patients with end-stage coronary artery disease.

Bussche, J.W. van den (2019) Dynamic spare part control for performance-based service contracts : a discrete-event simulation study.

Bussmann, N.H. (2019) Predicting Arrival Times of Container Vessels : A Machine Learning Application.

Buter, R. (2019) Minimizing travel time in a Neonatal Care Network.

Butterman, J. and Rikkers, I.C. and Verkroost, S. and Vreman, E. (2019) Accurate lengte berekening van pijpbeenderen bij fractuur met behulp van SiGrid als kalibratie van röntgenafbeeldingen.

Cabral, M.J. (2019) Augmenting an EMG-driven muscoskeletal model by accounting for intrisic muscle properties to improve joint stiffness estimation.

Cernat, Catalin (2019) Analysis of sensors used for interaction-based condition assessment of concrete.

Choudhury, Krittika (2019) Subject Specific HD-EMG driven musculoskeletal modeling for stroke subjects.

Coenraad, T.L. and Heugten, R.J.P. van and Ooster, P. van 't and Wulms, S.C.A. (2019) Spreken tijdens beademing op de Intensive Care: Studie naar de mate van compensatie van het teugvolume door verschillende beademingsmachines bij lek benodigd voor spreken tijdens beademing.

Cornelissen, J. (2019) Optimalisatie van de productieplanning : onderzoek naar het verschil tussen realisatie en planning.

Croonen, E. and Logendran, T. and Straetemans, L. and Visser, R.J. (2019) Deep learning voor dysfagiegradatie : Een voorstudie naar reconstructie van dynamische MR-beelden van slikbewegingen vanuit k-space en relevante klinische aspecten.

Dietvorst, Cornelis P. (2019) Programming data visualisations using Microsoft Power BI : building a scrap dashboard for BT2.

Dijk, Arne van (2019) Improving the efficiency of a picker-to-parts Export Warehouse.

Dijkshoorn, A.P. (2019) Characterizing the Anisotropic Electrical Properties of 3D Printed Conductive Sheets.

Dokter, M.H. (2019) How Barriers and Facilitators of Virtual Reality E-health Technology Implementation can be Used to Conform a Website to Practitioners : A Qualitative Study on the Perspective of Practitioners on VR Implementation Combined with a Literature Review, with Results Leading to the Development of a Website through a User-Centred Design Process.

Dommerholt, R.R.H. (2019) Developing an integrated system solution for early stage colorectal cancer diagnostics in a home setting : combining data analytics with consumer products creating future medical devices and improving quality of life.

Elzen, Tijmen van den (2019) Servitizing Company X : an assessment on service strategies and service design.

Ensink, W. (2019) Improving the warehouse network of Apollo Vredestein.

Enthoven, J.J.M (2019) Prediction of the hiatus esophagus location based on external landmarks and biometrics.

Erotas, Georgios (2019) Measurement consistency and the effect of ground planes on common-mode crosstalk.

Escobosa Bosman, O.M. (2019) Workforce Planning voor de Major Incident Manager : Een framework voor een SQC-breed planmodel.

Eversmann, H.Y.N. (2019) Computation offloading of augmented reality in warehouse order picking.

Frissen, J.V.H. (2019) Investigating to what extent the neuropsychological three layer theory of presence, involving proto-presence, core presence and extended presence, is applicable to the measurement of presence in virtual reality : an empirical study.

Gaaij, C.A. de (2019) Operational and tactical production planning at a production company.

Galgenbeld, J. (2019) Smart Rainwater Buffer XXL : Concept for urban spaces.

Geerts, S.J. (2019) The Influence of Spike-Timing Dependent Plasticity on Synaptic Connectivity of Coupled Inhibitory Neurons.

Gerth, Jasper (2019) Development of a system for real time localization of a team of athletes using Ultra Wide band : design choices and considerations for mesh network localization.

Ginneken, C.L. van (2019) Settlement of cross-border transactions through Central Bank Digital Currency (CBDC) : analysis from a risk management perspective.

Gogeascoechea Hernandez, A.D.J. (2019) Trans-Spinal Direct Current Stimulation in Incomplete Spinal Cord Injury Subjects: Analysis of Motor Unit Activity for a New Class of Biomarkers.

Grevinga, L. (2019) The health of children and their parents living in poverty in Twente : The effects of the intervention "Healthy Children in Low-income Families" on the six dimensions of positive health.

Habets, R.J. (2019) Improving the line performance of packaging line 41 at Heineken Zoeterwoude : a case study at Heineken.

Harten, Jasper van (2019) Prioritization of process descriptions within the supply chain of Thales Hengelo.

Havinga, Thijs (2019) Embedded Infrastructure for Decentralized Energy Management.

Heijdens, R.H.M. (2019) Design of a mastitis indicator sensor.

Hilberink, E.L. (2019) Effecten van de capaciteit en patiëntenbalans op de verlosafdeling ; Een onderzoek naar de effecten van veranderingen in de capaciteit en de balans van patiëntenstromen op de verlosafdeling van het St. Antoniusziekenhuis in Utrecht.

Hof, Irene van den (2019) Optimisation of a component replacement policy at KLM E&M using Predictive Maintenance.

Hoofs, M.A. (2019) Non-invasive diagnostic tools for the evaluation of diaphragm function in mechanically ventilated ICU patients.

Hove, E.M. van (2019) Train routing at the Shunt Yard : a Disjoint Paths approach.

Huiden, J.E. (2019) Generating Realistic Ghost Fingerprints by Combining Real Fingerprint Images.

Indrawijaya, K.R. (2019) Self-management Rehabilitation Capabilities on Older Adults by Persuasive Technology.

Jafarzadeh Esfahani, Mahdad (2019) Minimal sensing of quality of upper-limb movements.

Jain, Schrutir (2019) Energy transition in global north-south dimension : case of Overijssel and Mathura.

Janbroers, J.M. (2019) Developing an MR safe calibration and interface module for pneumatic stepper motors.

Jansen, W. (2019) Efficient Routing and Planning within the Complex Logistical Network : Based on the Integration of a New Warehouse, AGV Transports and Increased Transportation Rates.

Jong, T. C. de (2019) Optimizing mental health care processes through data driven operations management.

Jonker, L.M. (2019) Skin Lesion Surface Area and Erythema Intensity Calculation for PASI Determination using Stereo Vision.

Kara, Orkide Nur (2019) Environmental and economic sustainability of Zero-Emission Bus transport.

Karis, J (2019) Linehaul Forecasting at TNT.

Keurhorst, Maaike (2019) Feedback On Gaze Behaviour In Virtual Reality Bicycle Training For Children with a Developmental Coordination Disorder.

Kho, Eline (2019) The activity of the diaphragm during pulmonary transition in preterm infants : a feasibility and physiological study.

Knol, E.J. (2019) A dynamic life cycle analysis for a Defined Contribution pension plan.

Kooijman, Lucas Johannes (2019) Low voltage high performance silicon nitride EOF pump.

Koopman, Michael (2019) A framework for detecting and preventing security vulnerabilities in continuous integration/continuous delivery pipelines.

Koridon, M.S. (2019) Security by decision-making : a decision-making capability model for security countermeasures.

Kortenhorst, N.J. (2019) Improving the internal sequencing logistics at Scania Production Zwolle.

Kuiken, Wessel (2019) Led-screen Service Prediction Using Remote Monitoring.

Kulkarni, Vishwajit Vijay (2019) Embedded wearable device for monitoring diabetic foot ulcer parameters.

Kwinten, BSc W.M.J. (2019) SENS-U Bladder Sensor: continuous home monitoring of natural nocturnal bladder filling in children with nocturnal enuresis.

Lageveen, J.W. (2019) Developing a Path Planning Algorithm to Enhance the Performance of a Soft Robotic Endoscope.

Lamberti, M. (2019) Ischemic core : a method to analyse cell swelling.

Lambregts, M.C.P. and Raijmakers, F.D. and Ramselaar, M.S. and Toering, T.F. (2019) Continuous monitoring of functional recovery of frail elderly people after treatment of a hip fracture, making use of the data of the monitor devices 'Fitbit Charge HR and MOX, in order to optimize the rehabilitation process.

Lazar, A.I. (2019) Safe use of robotic arms as input devices.

Leeuwen, K.G. van (2019) From scan to speech : articulation analysis from real-time vocal tract MRI.

Licht, Christian (2019) Comparison of 2D and 3D realistic models of white matter microstructure.

Liefland, J.L. van (2019) Using the Safety Cube method and a Maturity Model for Urban Mobility to assess 6 categories of Personal Urban Mobility systems in the Netherlands.

Lievestro, H.J. (2019) Bedside quantitative cEEG monitoring on the Intensive Care for comatose patients after cardiac arrest.

Loof, R. (2019) Predicting the Internal Load of Amateur Athlete’s Based on Their External Load Using Accessible Sensors.

Lorkeers, S.A.M. (2019) Designing a low-fi laparoscopy simulator for studying learning of complex motor skills.

Matei, Denisa Alexandra (2019) Detection of Health Problems based on Historical Medical Records.

Mateo, Mikel (2019) Myoelectric control of bionic hands via musculoskeletal modelling, admittance control and force feedback.

Meer, Tom Q. B. van der (2019) Improving the factory efficiency of Bottling Line 2.

Meijer, K.M. (2019) Accuracy and stability of radiomic features for characterising tumour heterogeneity using multimodality imaging: a phantom study.

Meijer, N.J. (2019) How many defects?!

Meijer, T.G.J. (2019) Providing an insight into digital drawing technologies: Visualizing the costs and benefits using dashboards.

Menezes, Roshal Nikhil (2019) Embedded thrust estimator design of a brush-less direct current motor used in multi-rotor Unmanned Aerial Vehicle.

Mesman, BSc S.P.M. (2019) Optimisation of patient blueprint schedules with downstream departments and uncertain care pathways.

Morsinkhof, L.M. (2019) Partial volume and T1 correction in brain magnetic resonance spectroscopy imaging : improving data processing in order to determine brain glutamate levels in patients who experienced a psychosis.

Morsinkhof, N.B. (2019) Testing the structured method to design embedded control software.

Nijhuis, K. (2019) Design and evaluation of a stair climbing controller for a powered knee prosthesis.

Noltes, L. (2019) A study into laparoscopic surgical navigation for colorectal cancer patients without a hybrid operating room.

Noordenne, M. van (2019) Co-designing an online platform for ASD: about co-designing with adolescents on the autism spectrum and what such a platform would look like.

Oldemaat, T.A.B. (2019) Improving the Internal Big Volume Transport Logistics at Bosch Thermotechniek Deventer.

Ooms, L.A. (2019) How can we cure the care sector? : optimization of the health care logistics of Ambiq for the benefit of their clients.

Orive Benito, Ana (2019) New Concept for Laparoscopic Magnetic Detection.

Ouw, Yorrick van der (2019) Making Makers : How STEM kits can help in taking the first steps.

Overmars, C.C. (2019) Production line improvement at Bosch Thermotechniek.

Pazos Urrea, Monica (2019) Concentration and Esterification of Lactic Acid in Complex Coacervates.

Perik, T.H. (2019) Image-guided liver interventions: Ablation assessment and MR-guided liver biopsy.

Platenkamp, T.J.W. (2019) The impact of a new filling line : a multi-scenario discrete event simulation at Company X.

Pleijsier, A.A. (2019) Acoustic condition assessment of concrete sewer pipes using a particle velocity sensor.

Plompen, Roel (2019) Item availability restricted.

Prakken, E.B. (2019) 3D Printed flow sensor.

Pu, Leiying (2019) Co-design approach : a collective design method for improving working efficiency and satisfaction in user support design processes : an empirical study based on three comparison groups simulating a real-world quick start guide design process.

Rhijn, Gijs van (2019) Why your back hurts : Finding an efficient way to measure and evaluate sitting posture using a combination of body sensors placed on the body and machine learning.

Rijnbeek, E.H. (2019) Item availability restricted.

Rijst, J.C. van der (2019) The assignment of clinical departments to wards.

Roerink, M.H.W. (2019) Liability Reduction through Demand Forecasting Improvement.

Roks, M.J. (2019) Design and Evaluation of a Controller for Ramp Negotiation with an Active Transfemoral Prosthesis.

Said, S.A. (2019) Clinicopathologic factors predictive of platinum resistance in advanced stage epithelial ovarian cancer : development and validation of a prediction model using a nationwide.

Sanchez-Escalonilla Plaza, Santiago (2019) Study of semantic segmentation applications for autonomous vehicles.

Schepers, P. (2019) Application of a process model to define potential operational functional failure conditions.

Schoon, A.L. (2019) Multi-Criteria Decision Support for Transportation Network (Re-)Design at Outbound Logistics, Tata Steel Europe.

Schooten, R.W. van (2019) Characteristics of highly uncertain and complex projects.

Schulte, R.V. (2019) Up to MyLeg with data : human motor intent recognition using multi-array EMG and machine learning.

Schulte, R.V. (2019) Up to MyLeg with data : human motor intent recognition using Multi-Array EMG and machine learning.

Shea, Gary (2019) Item availability restricted.

Smits, Paul L. (2019) Seizure onset detection for responsive stimulation in the sensorimotor cortex.

Smorenburg, S.P.M. (2019) Preoperative planning and intraoperative image fusion improvement during endovascular aneurysm repair.

Soontiëns, E.J.P. (2019) Production Planning at Dupo Plastics.

Sparrius, T.L. (2019) Analysis and improvement of the new product introduction centre of Company X using key performance indicators.

Sparrius, T.L. (2019) Analysis and improvement of the new product introduction centre of Company X using key performance indicators.

Spenkelink, I.M. (2019) The role of diffusion weighted imaging in differentiation of solid renal masses.

Spijkerboer, E. C. (2019) Blockchain based transaction processing system : a reference architecture for an integrated blockchain based transaction processing system.

Spijkerboer, Feline (2019) The Cluster Tool : designing a clustering algorithm and graphical user interface for efficient clinical interpretation of Interictal Epileptiform Discharges.

Stanca, Edith-Ioana (2019) Strategical Capacity Planning For Two Of Sensata's Automotive Departments.

Steenbergen, R.M. van (2019) New Product Forecasting with Analogous Products : Applying Random Forest and Quantile Regression Forest to forecasting and inventory management.

Stienissen, S. (2019) Decreasing the Workload at a Mental Healthcare Institution: a simulation study.

Stolk, E.F. (2019) From Quantified Self to Qualified Self - A data visualisation.

Sulzer, Niels (2019) Hardware-Efficient Real-Time Statistical Analysis on Streaming Data.

Tijhuis, A. (2019) Improving the inventory control policy of TenCate Grass.

Tjeerdsma, S. (2019) Redesign of the AutoStore order processing line.

Ubbens, V.G.P. (2019) A study and design on sustainable technologies for houses and social interaction.

Veneklaas, W. (2019) Decision support for design, implementation, and feasibility of an admission lounge.

Vermaas, Alicia (2019) A product development success? : Providing insights in improvement of industry's product development maturity.

Vermeer, M. (2019) Interface trap density extraction from the subthreshold slope of FDSOI devices.

Vermeulen, J.J. (2019) Flexible multibody dynamics of an Afterburner-type fairground attraction.

Visschers, S.H.J. (2019) Perception-aware visual odometry.

Visschers, Stephan H.J. (2019) Perception-aware Visual Odometry.

Vlaskamp, L.B. (2019) Implementation of wireless vital signs monitoring on the general ward: Nursing practice towards alarm strategy.

Voetdijk, N.J. (2019) Assessing the life cycle costs of an investment strategy.

Vosman, M.J. (2019) Model optimization and parameter estimation in a bi-hormonal model of glucose dynamics in type 1 diabetes mellitus patients.

Vries, BSc G.J. de (2019) Development of a myocardial perfusion phantom.

Weersel, S. van (2019) Preference learning: What defines an optimal shift schedule?

Weg, Inge van der (2019) A generalized Risk-based maintenance model to plan road maintenance.

Werink, Rens (2019) On the control allocation of fully-actuated and over-actuated multirotor UAVs.

Wijlens, K.A.E. (2019) Dynamics of lung function and phase diagram.

Winters, E.G. (2019) Digital PET-CT in oncology: image quality optimization and diagnostic comparison with conventional PET.

Wittrock, S. (2019) Motivational strategies to improve self management rehabilitation.

Xia, Ziyang (2019) Speech technology to support interventional radiologists by assisting the hands-occupied problem.

Zaag, Heleen van der (2019) Transferring soft-skills through a digital medium: A proof of concept for co-creation facilitators.

Zandbergen, Tijmen (2019) Improving the packaging line at SES Creative : a simulation study.

Zomerdijk, J. (2019) Lead time reduction in the transport of reverse parcels.

Zwiers, R.J. (2019) Determining the optimal warehouse location.

olde Heuvel, K. (2019) Influence of personality traits and emotional content on the sense of presence in a VR apllication.

Šćulac, L. (2019) Research into 3D Printed Batteries through Electrodeposition.

2018

Abdul Hamid, M. (2018) Analysis of trade-off between investment cost and sustainability for renewable energy integration in a neighborhood.

Ahovi, R.E. (2018) Come play with me! : Attracting passers-by to interactive floors in semi-public space.

Ahuja, M. (2018) Perceived credibility in mHealth apps : a case study on a sleep scheduling app for insomnia.

Alhawary, Mohammed (2018) Reinforcement-learning-based navigation for autonomous mobile robots in unknown environments.

Aliyev, Javid (2018) Cost-performance analysis of printed circuit boards using hybrid stackup.

Amptmeijer, R. S. (2018) The influence of a storytelling robot on recall of a storytelling activity.

Bagave, Prachi (2018) Unobtrusive sensing using WiFi signals.

Baksi, Shreyo (2018) Kiosk for 3D image acquisition of suspects.

Barbero, Marta (2018) Reinforcement learning for robot navigation in constrained environments.

Battistig, R.C.M. (2018) Item availability restricted.

Bekhuis, R.E.M. (2018) Electrode positioning of transcutaneous electromyography of the diaphragm in preterm infant.

Berg, B. van den (2018) Stimulus related evoked potentials around the nociceptive detection threshold.

Bergsma, M. (2018) Development of a Framework for the design for maintenance solutions based on a biomimicry methodology.

Beugels, F (2018) Non-destructive testing of solid propellant rocket motors.

Beukel, Daniël Johannes van den (2018) Thesis urenregistratie proces.

Bhole, Ajinkya (2018) Towards KriCatch : A Slip Catching Practice System for the game of Cricket.

Boelders, F.B. (2018) Developing a Ready2Help Application.

Boersma, E.M. (2018) Designing a user interface for the hygienic self-service device SAMPOORNA.

Borgman, Iris (2018) The influence of packaging design features on consumers' purchasing & recycling behaviour.

Bosch, H. (2018) Preventing hypothermia among Sheltersuit users.

Bosschaart, Z.M. (2018) Designing music lessons for the 21st century : make learning a musical instrument more fun, playful, and modern.

Bouwmans, Rens (2018) Intra-cavity light distribution model for photodynamic therapy.

Broek, D. van den (2018) Finding improvement options within company X.

Bronsvoort, Sandra (2018) Long-term replacement planning for Royal Schiphol Group : an Integer Linear Programming model.

Bustillo Rodriguez, A. (2018) Validation of a machine learning approach and control strategy for a rehabilitation robot to train the upper extremity in stroke patients.

Casteleijn, T.K. (2018) Start-up knowledge brought to large organisations : Innovation management software based on blockchain technology.

Chang, Jiska (2018) Het verbeteren van effectiviteit en efficiëntie van de whiteboardmeetings bij VDL ETG.

Commandeur, K.R. (2018) Tube mill optimization at Tata Steel Tubes.

Dartel, D. van (2018) The effects of transcutaneous vagus nerve stimulation in patients diagnosed with epilepsy and healthy subjects.

Daulay, B.Eng O.F.P.G (2018) Investigating Planar Balun Structures with inherent impedance transformation and power combining properties.

Diemen, Msc. Chris R. van (2018) Experimental verification of a model for predicting the frequency spectrum generated by a sPWM power converter using FM theory by use of a GaN halfbridge module.

Dikken, N. (2018) Digital Sports Training Exercises for Volleyball.

Dommelen, R.C. van (2018) A semi-anthropmorphic photoacoustic breast phantom.

Dortmann, M.L. (2018) Developing a user interface for smart rainwater buffer systems.

Driessens, W.J.S.F (2018) A strucutured approach towards the selection of a new hard- and software system supplier.

Drion, W.R.B. (2018) Online support system of personalized learning strategies : an application to promote self-regulated learning.

Durmus, N. (2018) Development of a human peripheral myelinated axon model.

Eidhof, Martijn (2018) Concentration Polarization to Measure the Nanopore Accessibility of Fluid Catalytic Cracking Particles.

Emmen, J.H.F.M. (2018) Selecting an adequate order pick supporting technique : a research on a more convenient fulfilment of order picking activities.

Gagelas, P. (2018) “Keep Your Eyes on the Road, Kid!” : Exploring the Potential of Virtual Reality Environments to Teach Children to Keep Their Attention While Biking.

Galvan Hernández, J.A. (2018) Motivational strategies to improve self-management for rehabilitation of older adults.

Gankema, R. (2018) Herplanning van Bolletje's Gepland Periodiek Onderhoud.

Gantevoort, S. (2018) Electrocardiographic analysis of ventricular fibrillation: a machine learning approach to identify a previous myocardial infarction.

Giesselink, S. (2018) Teach me CPR now! Augmented learning for one-shot teaching of cardiopulmonary resuscitation in out-of-hospital cardiac arrest.

Grevenstuk, O.A. (2018) Raw shaping form finding : seven tacit tangible interactive design experiments.

Groen, A.E.A. (2018) Monitoring usage patterns in the Sampoorna project.

Groen, M.C. (2018) Assessing the Effect of Smart Reinforcement Alternatives on the Expected Asset Lifetime of Low Voltage Networks.

Groen, M.H.A. (2018) Feasibility of irreversible electroporation for pulmonary vein isolation.

Groeneveld, J. (2018) Judgment of fabrics using haptic feedback technology.

Gruter, C.C.A. (2018) The game design of a serious game about food waste.

Haalstra, M.J.T. and Pigmans, R.R.W.P. and Raat, F.M. de and Vette, S.P.M. de (2018) Progression of the retinal calcification of PXE patients quantified based on ICGA.

Hagens, L.A. (2018) Towards a new diagnostic swallowing assessment : the first step in assessing dysphagia in intensive care unit patients.

Hameete, Annoeska and Waldner, Simon and Luit, Lisette and Smits, Karin (2018) Ontwikkeling en validatie van een tumor-on-a-chip systeem voor het bepalen van de meerwaarde van radiotherapie als adjuvante therapie bij synoviaal sarcoom.

Hamelers, L.H. (2018) Investigating generic online animal activity recognition across different animal species.

Haring, M.R. (2018) Optimal maintenance planning using reliability information for offshore wind turbines.

Haverkate, R. (2018) ATR-IR microreactor with ultra fast integrated microvalves for heterogeneous catalytic analysis in the microsecond domain.

Heidemann, Claudia (2018) Characterisation of a nano-g accelerometer.

Hesselink, M. M. J. (2018) Developing a Forecasting Model for the Power Production of Wind Turbines.

Heus, L.E. de (2018) Hydrogel-based 3D semi-circular microvascular bbb-on-chip with integrated sensors for barrier assessment through TEER measurements.

Hoedemakers, Juliette (2018) Effective visualisation of textile for a Digital Showroom.

Hofstra, Silke (2018) Automated analysis and simulation of control systems using dataflow.

Hogenes, A.M. (2018) Visualization of the electric field distribution in a static electric field to investigate irreversible electroporation: modification of several ablation parameters.

Holland, Mark van (2018) Visual puppeteering using the Vizualeyez : 3D motion capture system.

Horst, Oliver (2018) Development of a smart healthcare tracking system : for the hip fracture rehabilitation process.

Hottenhuis, B. R. (2018) Continual and continuous improvement : combining the theory of constraints and lean manufacturing.

Hoven, Leon van den (2018) The simultaneous diagnosis of malalignment and liner wear in problematic primary total knee prosthesis with low-field MRI.

Hsiao, K (2018) Intuitive Approach to an Interactive Tutorial for the VirtuScope.

Hua, F. (2018) Training Fine Motor Skills in the Hands with Game Elements.

Hulman, T. (2018) Item availability restricted.

IJsselmuiden, M.J.H. van (2018) 3D-model annotation for Computer Aided Design in augmented reality.

Idsardi, A.N. (2018) Towards individualized titration of high-frequency oscillatory ventilation in paediatric acute respiratory failure.

Ingen, F.P. van (2018) Optimalisatie op de vulkanisatieafdeling in de bandenindustrie : onderzoek naar een beslissingsmodel voor het onderhouden en vervangen van vulkanisatiepersen.

Jakubeit, Nina (2018) Asset life cycle management at PPG AC EMEA : the design of an asset life cycle management tool to prioritize asset lifetime impacts based on the lifetime impact identification analysis (LIIA).

Jansen, Jorn (2018) Endoscopic end effector control using soft actuator.

Jansen, Niels (2018) Towards improved observation of pain sensitivity in the context of chronic pain development: Next steps in CutaStim and QScale development.

Jonkheim, M.H.T. (2018) Capaciteitsanalyse bij Twence: Een simulatieonderzoek naar capaciteit en doorlooptijd.

Jurrius, P.A.G.T. (2018) Intraoperative fluorescence imaging for the assessment of excision margins and lymph node involvement in breast cancer using EMI-137.

Kamp, K. (2018) Inventory control at Grolsch : a master thesis which analyzes inventory control at Grolsch and proposes a model to determine optimal levels of safety stock.

Kampkuiper, N.F.B. and Kolenbrander, I.D. and Lobeek, J. and Nieuwenhuys, W.W. (2018) Osteofytvorming na kniedistractie : het meten van osteofytvolumes na KJD met behulp van 3D-CT.

Katzourakis, Antonios (2018) Item availability restricted.

Keijzer, P.B. (2018) AACE - Assessment of Asthma in Children using Electromyography.

Khomenko, Vladyslav (2018) Dynamic Balance : designing an interface for a personalized e-health solution aimed at individuals with ASD.

Kikke, N.Y.S.A (2018) Optimal capacity planning with uncertain supply in a whitefish processing plant.

Klijnsma, X.P.M. (2018) Local Renewable Energy Initiatives in the natural gas-free energy transition in the Netherlands : Obstacles, barriers and measures in niche development of local cooperative district heating by forerunner initiatives in the province of Friesland.

Kortenbout, Jorinde (2018) Quantification of cerebral blood flow with contrast enhanced ultrasound.

Koster, Arjan (2018) Reduction of the occupational radiation dose of hybrid operating theater staff during peripheral endovascular procedures.

Kronenberg, Bsc. A.A. (2018) Improving post-treatment dosimetry for selective intra-arterial radiation therapy in liver metastases.

Kruijff, O. de (2018) Using additive manufacturing for rapid tooling of obsolete spare parts in the aerospace industry.

Kuiper, A. (2018) Value in virtual reality : the values for virtual reality for forensic mental healthcare.

Kuppens, D. (2018) Machine Learning for CT-based clinical triage in hemorrhagic and ischemic stroke.

Kwakkel, D.J. (2018) Sheltersuit meets technology: sensing the risk of hypothermia.

Lange, R. de and Markusse, M. and Jongh, S.A.M. de (2018) Item availability restricted.

Lankhorst, T.J.W. (2018) An architectural approach to cyber-physical system design.

Lobbes, M. (2018) Needle guidance technology for image-guided percutaneous procedures : assessment of clinical applicability and feasibility.

Luinstra, J.M. (2018) Reducing workload fluctuations through causal forecasting : a case study in the plaster room of Sint Maartenskliniek.

Markova, Betina (2018) Re-play : Interactive Playground Games To Motivate Playing.

Meijer, S.D. (2018) The implementation of collision avoiding haptic feedback in the pedal-based control of a robotic platform.

Meijering, R. (2018) Vision-based control of the SHERPA arm.

Mes, T.G. (2018) Updating rotating documentation in Grade 5 Nouryon Rotterdam Botlek.

Minnen, Matthijs van (2018) Analysis and Rerouting of Nets for Partial Reconfigurable FPGA Designs using RapidSmith2.

Muller, I.J.T. (2018) Improving the service control tower with proactive decision making : a two-staged alert and intervention generating model for proactive lateral transshipments in an after-sales supply chain.

Nass, M. (2018) Finding intelligence in disordered boron dopant atoms.

Nazarian, Arthur (2018) Optimizing the deployment of automated external defibrillators by a data-driven algorithmic approach.

Nelissen, M.L. and Norden, S.J. van and Vreeken, M.S. (2018) Concept models of new fixation and stabilization methods for osteoporotic vertebrae : what are new methods for stabilizing osteoporotic vertebral compression fractures and fixating the vertebrae, what do concept models of the best new methods look like and how do they compare to current methods and methods being developed?

Niehoff, Dennis (2018) Evaluation of Motion Control Algorithms for Miniaturized Agents Moving Inside 3D Fluidic Microchannels.

Nijzink, H.J. (2018) A homemade air quality sensor : is it viable?

Noordhuis, RE.. (2018) Lead time reduction by production planning and control.

Ocal, Gulsen (2018) Prevention of Suddent Infant Death Syndrome : eHealth intervention design to support the current health promotion and education about SIDS.

Onderwater, T.C. (2018) Developing a sensor network for real time temperature monitoring in Enschede.

Oude Nijhuis, K.A. (2018) Monitoring and controlling critical process parameters at the retort production line of Abbott Zwolle.

Posthumus, J.A. (2018) Predicting and preventing ED crowding : combining linear regression and discrete event simulation to predict and prevent ED crowding.

Santana, Tiago de (2018) A feasibility study of electric cars powered by solar energy : The cases of The Netherlands, Norway and Brazil.

Schuhmacher, M. (2018) Autonomous anatomical structure recognition using machine learning.

Simons, A.M. (2018) Improving Scientia’s timetabling using key performance indicators : a case study at Utrecht University for Scientia.

Simons, T.V. (2018) Interaction design for professional virtual reality training applications.

Smit, Marry (2018) herQLUS: Assessment of lung aeration by lung ultrasound in intensive care unit patients : development of a quantitative analysis method.

Spaan, C.E (2018) The recognition of hand gestures by evaluating micro-vibrations using a single wrist-worn highly sampled IMU.

Stoel, M.D. van der (2018) Observations on suppressed power following single pulse electrocortical stimulation : clinical relevance for the REC2Stim trial.

Stoks, J. (2018) Improving Long QT Syndrome diagnosis using machine learning on ECG characteristics.

Struijs, E.M. (2018) Patient specific surgery planning for treatment of patellofemoral instability.

Takken, J.I.M. (2018) Design of a rowing support system for senior rowers.

Ukens, Konrad (2018) Gamification of an annotation task.

Vaneev, Nikita (2018) Building a virtual environment in Unity based on a robot's perception.

Vee, M.S. van der (2018) Feasibility of echoPIV in the stented femoral artery.

Velden, E. van der (2018) Determining the optimal endoscopy movements for training and assessing psychomotor skills.

Verburg, D. (2018) Biodegradable sensor nodes. Zero ecological impact nodes for wireless sensor networks.

Vermeulen, J.J.M. (2018) EndoAnchors in abdominal aortic endografts : in-vitro and clinical outcome.

Vitanov, Vesselin (2018) The asteroid field of your mind : examine neurofeedback effects in an interactive art installation.

Vries, J.F. de (2018) Redesign & Implementation of a Moment Exchange Unicycle Robot.

Vriezekolk, Björn (2018) Grip op het materieel : meer inzicht in de prestaties van het materieel met behulp van KPI's, VBA & een nieuwe manier van tarievering.

Wardhana, Girindra (2018) Automatic Segmentation and 3D Reconstruction of Liver and Tumor.

Waterink, J. (2018) Development of a DIY and consumer ready Smart Rainwater Buffer.

Weda, J. (2018) Supporting shared leadership in human-robot teams with minimal robot behavior.

Welling, S.A. (2018) Het optimaliseren van administratieve processen met behulp van Continuous Improvement.

Wisselink, H.J. (2018) Effect of reconstruction kernels and post-processing parameters on emphysema densitometry in ultra-low-dose CT: a validation study.

Wisselink, W.J. (2018) Future Flamco : a scenario-based simulation approach for smart intralogistics.

Witjes, Bart (2018) Magneto-encephalography (MEG) to image the brain’s role in the analgesic effects of Spinal Cord Stimulation (SCS).

Wooning, I.J. van (2018) Optimood : Transforming Health Data into Practical Advice and Insights.

Wu, Xiangyi (2018) Use animations to support knowledge transfer built on the understanding of the non-experts’ mental model.

Xiong, Jiachen (2018) Towards a miniature wobbe index meter.

Zadelhoff, L.D. van (2018) Het ontwerp van een hoog-automatische productielijn.

d'Angremont, E. (2018) Towards an automated analysis for the delineation of focal epilepsy : single pulse electrical stimulation and machine learning.

2017

Aarnink, K.M. (2017) Electro-mechanical resynchronisation therapy with a smart material in patients with heart failure: an experimental study.

Abdelhady, M.A. (2017) Reuse-oriented SLAM framework using component-based approach.

Abdelmoeti, Samer (2017) Self-powered Vibration Control using Piezoelectric Materials in High Precision Machines.

Aggelen, J.M. van (2017) Using virtual reality to support substance use disorder treatment in people with an intellectual disability.

Baaij, R.R.C. de (2017) Caching in 5g networks.

Bakhuizen, B.T. (2017) Towards intraoperative identification of colorectal carcinoma using diffise reflectance spectroscopy : a comparison of in vivo and ex vivo measurements.

Bannink, L. S. and Golbach, E. M. and Schouten, D. N. and Twilt, J. J. (2017) Een vergelijkend onderzoek naar T1-mapping waarden van skeletspieren tussen Fabry-patiënten en gezonde proefpersonen.

Baveco, M.A. (2017) Analysis and design of a (super) low 1/f-noise LC oscillator.

Beke, Chris ter (2017) Interaction development for personal daily support : design of conversational agent for activity tracking.

Bergwerff, P. and Bielevelt, F. and Bokhoven, D.M. and Eyck, Q.D. (2017) Ontwikkeling van een gevalideerde meetopstelling waarmee onderzocht kan worden wat het effect is van de positionering en de penetratiediepte van EndoAnchorsTM op de maximale trekkracht die nodig is om migratie van een AFX® Endoprothese, geplaatst in een siliconen aortamodel, te induceren zoals deze op kan treden bij patiënten met een Aneurysma Aortae Abdominalis.

Blok, S. and Klop, M. and Langerak, N.C. and Stam, L.B. (2017) Item availability restricted.

Bode, M. S. P. (2017) How to Design an Interactive Installation for Concordia.

Boer, C.A.G. de and Meijden, D. van der and Versluis, W.D. (2017) Item availability restricted.

Boer, S.L. (2017) Robot vacuum cleaner with personality traits.

Buter, R. (2017) Het reduceren van variatie in bedbezetting door het toewijzen van specialismen aan verpleegafdelingen.

Cañizares, Jose Carlos (2017) The Information Society: Technological, Socioeconomic and Cultural aspects - Prolegomena for a sustainability-oriented ethics of ICT, with glossary and PhD prop.

Dedden, G.F. (2017) Assistance in balance recovery during gait using an ankle exoskeleton controlled with a neuromuscular controller.

Den, Michael ten (2017) Design of a pneumatic Dual-Drive Planetary actuator to improve the velocity of MR guided manipulators.

Dijk, F.W. van (2017) Adopting the Cloud: A multi-method approach towards developing a cloud maturity model.

Dijks, J.P. (2017) Optimization of replacement times of soft parts in gas pressure control systems.

Dijkstra, J.E. (2017) Improving session planning in the plaster room of Sint Maartenskliniek.

Eemeren, T. van (2017) Pathos and Technology - a Matter of Rhetoric.

Egmond, C.A.W. van and Hengst, S.G. and Pelgröm, A.T. and Vreeken, M.S. (2017) Requirements for a monitoring sensor system to protect patients from vital threat.

Elfaramawy, Ibrahim (2017) Designing an accessible workflow for Rapid Prototyping on a homemade 3-axis CNC machine.

Ellery, D. (2017) Writing reusable code for robotics.

Fahmi, Shamel (2017) Respiratory motion estimation of the liver with abdominal motion as a surrogate : a supervised learning approach.

Feiner, S.C. and Riphagen, S. and Hovenier, R. (2017) Een alarmerend probleem - Het reduceren van valse aritmie alarmen op de Spoedeisende Hulp door het combineren van het elektrocardiogram met het fotoplethysmogram om de patiëntveiligheid te verbeteren.

Geervliet, E.K. and Paalvast, A.S. and Rheenen, BSc S.K. van and Schreijer, M.A. (2017) The use of a shape memory material in the treatment of heart failure with a reduced ejection fraction.

Gies, S.H. (2017) Ornithopter flight dynamics : measurement and analysis of the Robird's Flapping Wing.

Gijzen, R. (2017) Valuation of an exoskeleton based on the capability approach.

Gils, N.D.M. van and Kappe, K.O. and Nieuwenhof, H.B. van den and Sieswerda, J.J. (2017) Verbetering van de nauwkeurigheid van het elektromagnetische chirurgische navigatiesysteem bij endonasale endoscopische chirurgie middels een non-invasieve alternatieve matching methode voor de surface matching methode.

Gorter, D. (2017) Added value of machine learning in retail credit risk.

Graaf, A de (2017) The dynamics of community innovations : A socio-technical analysis of the shaping of The Things Network – an Internet of Things community network.

Groot Koerkamp, M.L. (2017) Towards MRI-guided radiation therapy of regional lymph nodes in breast cancer patients.

Gupta, Amit Kumar (2017) Security risk analysis of automotive ethernet networks.

Haan, J.B.A. de (2017) Mediation and the Morality of Sex Selection - Contributions of a Mediation Approach to the Assessment of Sex-Selection Technologies.

Hobert, Eddo (2017) 3D Printed flexible fingertip strain sensor.

Hoogterp, H. (2017) Crop harvesters feed us, but how do we feed them?

Jager, J (2017) Joint level modelling, characterisation and torque control of the SHERPA robotic arm.

Jansen, Mylène P. (2017) A Novel 3D joint space quantification method in patients with osteoarthritis in the knee.

Jezuita, Lena (2017) Improving the overall customer service level : a case study at Philips.

Kaldeweide, Mara Alexandra (2017) Developing a questionnaire to measure the uptake and impact of eHealth technology among healthcare providers.

Kaptein, R (2017) Het verminderen van afkeur bij composiet producten.

Keep, Y.W.A.M. van (2017) Assessment of echogenicity of the cervix at 12 weeks pregnancy in relation to the mode of delivery.

Kemény, Ádám István (2017) Child Loss Prevention: A WiFi based assistant in a predetermined domain.

Kerkdijk, J.S. (2017) Ontwerpen van een optimale onderhoudsmethode voor Remeha B.V.

Klop, C. (2017) Imaging the bariatric patient : employing conventional imaging techniques in unconventional ways.

Knipscheer, B. and Stuiver, S. and Welij, J.J. van and Zagers, D.A. (2017) Electrode usability during a multiday abdominal neuromuscular electrostimulation program.

Kok, H.M. (2017) Simulating Desired Behavior of Students by Means of a Context-Aware Dynamic-Lighting System in the SmartXp.

Koopman, N.H.D. (2017) Het potentieel van Onbemande Vrachtvliegtuigen volgens verladers.

Kortenbout, N. (2017) Natural Interaction with Garment.

Lammers, B. (2017) Design and realisation of a haptic interface between a ReFlex TakkTile and an Omega 7 Haptic Device.

Lechner, Zoe Carlotta (2017) Facing 21st century challenges : an assessment of the EU’s security provisions in the light of increasing cybercrime.

Loonen, T.G.J. (2017) 3D imaging for the prediction of a difficult airway.

Louw, S.J.A. de (2017) Control Surface Waves by Modifying Surface Properties of a Microstrip Patch Antenna Array.

Manen, R. van (2017) Handling conditions on lots in tenders.

Manterola, Nahuel (2017) Creating 3D images for facial recognition using the RealSense SR300.

Mocking, R.A. (2017) Standardizing the requirements engineering process for a software product vendor.

Moucachen, J. (2017) Developing a News Aggregation and Validation System.

Nannings, L. and Paalvast, O. and Scholten, J. and Dierx, V. (2017) Functional information about the right ventricle from combined haemodynamic measurements for a right ventricular assist device application.

Niechwiadowicz, Karolina Julia (2017) Virtual Reality and Game Mechanics in Generalized Social Phobia Treatment.

Nieuwenburg, E.C.E.M. (2017) Project Buddiez : designing for long-distance-friendships between children.

Nijenhuis, Yoran (2017) Characteristics of rank-reversal.

Okken, B. (2017) Design and Empirical study of tilting propellers of an over-actuated quadrotor.

Opheusden, L.M.E. van (2017) Design of a control strategy for obstacle crossing in a lower limb exoskeleton for SCI patients.

Opitz, F.T. (2017) Wearable technology : exploration from the technical side.

Overkempe, B. (2017) Van ruwe data naar verklarende data : Het verklaren van het optimale productieplan bij een Advanced Planning and Scheduling systeem.

Pieterse, R.G.M.G. (2017) The use of a marshalling area in the warehouses of Albert Heijn.

Prieto Serratos, Erik Armando (2017) Multilevel panel method validation using the New MEXICO Wind Tunnel Measurements.

Prins, N.M. and Ochten, M. van and Steen, D. van der and Wiggers, R.B.M. (2017) Designing a synthetic model of the esophagus to test efficacy and oxygen distribution of an intelligent oxygen delivery device.

Ridderhof, C.P.J. (2017) Determining design relations for a magneto caloric device with multiple magneto caloric materials using numerical software.

Rijk, L.M.S.J. (2017) Acid Robust Piezoresistive Pressure Sensors.

Rindt, F.S. (2017) Developing a Smart Rainwater Buffering System for the Citizens of Enschede.

SHAMETAJ, P. (2017) Increasing the immersive experience in the Leo Universal Cockpit.

Sas, Jolien van (2017) The effect of team leader stress on teams practicing cardiopulmonary resuscitation in a simulation room : an exploratory study into the effect of team leader stress on team leader behaviour, closed-loop communication, and team performance of a simulated medical emergency team.

Schlief, J.G.L. (2017) Temperature optimization of the SuperParamagnetic Quantifier for comparison with standard methods.

Schultz, Pim (2017) Using machine-learning models for operational exception handling : a case study at IBM.

Schurink, N.W. (2017) Hyperspectral imaging and tumor classification for intra-operative colorectal cancer resection margin evaluation.

Sipma, K.E. (2017) BIT-Evaluaties bij de rijksoverheid : aanmeldingen onder de loep.

Smit, J.N. (2017) Ultrasound-based navigation for surgical removal of liver lesions : a feasibility study of MRI-ultrasound fusion in the operation theatre.

Snaauw, G. (2017) Camera calibration for oblique viewing laparoscopes.

Spil, Gino van (2017) Delay compensation in mobile face tracking.

Staveren, E.S. van (2017) Towards a personalised biomechanical tongue model : sEMG measurements on the tongue and motor unit identification.

Steenbergen, R.M. van (2017) The impact of price elasticity in the sales and operations planning.

Stiphout, A.J. van (2017) Het vaststellen van SLAs op de SEH van het SKB.

Tenbergen, C.J.A. (2017) Quantification of amyloid-PET scans in early detection of Alzheimer’s disease.

Theuns, J.K.H (2017) Visualising Origin-Destination Data with Virtual Reality: Functional prototypes and a framework for continued VR research at the ITC faculty.

Thomasson, S.A. (2017) Improving forecast performance of LPG demand.

Tran, Dat (2017) Design of a conversion rate optimization tool for E-commerce.

Tsavdaroglou, M. (2017) Risk analysis of interdependent Critical Infrastructures to Extreme Weather Events.

Veenstra, R.F. (2017) Upload! : transportation planning and marketplace for inefficient trips : Construction of the mathematical intelligence of the ‘Upload!’ route planning and marketplace.

Vegt, F. van der (2017) Cost analysis of the Wound Expertise Centre at the Isala clinics in Zwolle.

Versteeg, Nathalie (2017) Real-time tracking of rectal tumours during colorectal cancer surgery.

Verzijl, Peter (2017) Using serious games to teach cause effect relationships in asphalt quality.

Vetter, Boaz (2017) Designing a smart rainwater buffer.

Voetdijk, N.J. (2017) Een model voor de productiekwaliteit van bedrijf X.

Vogelzang, K.H. (2017) The tennis trainer : development of a Myo armband application.

Vos, M. de (2017) Developing a feedback tool to gain insights into the professional identity of STEM students.

Vree, J.H. de (2017) Design of an Energy Efficient 12-bit 100MS/s SAR ADC in 22nm FD-SOI.

Vreriks, S.F. (2017) New Integrated Warehouse Design Framework And its application at ATAG Benelux BV on the redesign of the distribution warehouse.

Vries, J.K. de (2017) Designing an informative, promotional, interactive artefact for Vopak about the RaM team, the University of Twente, and the PIRATE.

Vries, S.B. de (2017) Internal strategic alignment within the setting of asset management.

Vries, S.J. de (2017) Peer Control & Self-Managing Work Teams in the healthcare industry: A literature review.

Walet, O.P.D. (2017) How can radical innovation bring back product competition in a stagnating smartphone industry?

Wattel, N.J. (2017) The improvement of Failure Mode, Effects and Criticality Analysis at Grolsch.

Wijnholt, R. (2017) Design of a real-time network channel in LUNA.

Willems, P. (2017) Mood controlled affective ambiences for the elderly.

With, L.A. de (2017) An Augmented Reality Game to Support the Ski-Learning Process.

Witsen, O.N.C. (2017) Het reorganiseren van het intern transport bij Fokker.

Wuthe, Christopher-Martin (2017) Strategic IT alignment in public sector organisations : extending the strategic alignment maturity model for the German public sector.

Yuan, W. (2017) Web-based self-care for acute non-specific low back pain: An exploratory study of user experience and acceptability.

Yusnitha, Erilia (2017) Fabrication and characterization of patterned titania layers.

Zhang, Jing (2017) Actions Towards Decarbonization - Climate Policy Assessment and Emissions Modelling with Case Study for South Africa.

2016

Abdelaziz, Mohamed Essam Mohamed Kassem (2016) Designing, implementing and integrating a controller for the MRI compatible robotic breast biopsy system.

Andreev, L. (2016) Sociometric badges in a high-stakes setting : living proof a sociometric feedback visualization.

Awlad Wadair, Balsam (2016) Tweeting about health technologies during the Movember campaign : Who is involved and how do they frame their discourse? : an exploratory study investigating the identity of Twitter users tweeting about technology and treatments of Prostate and Testicular cancers, and how they frame their discourse.

Barbieri, G. (2016) Control architecture for docking UAVs with a 7-DOF manipulator.

Bedem, S.G. van den (2016) A constructive tool to predict timetable feasibility under user defined constraints.

Bemthuis, T.J. (2016) De voorspelling van de bachelor Open Dagen : een onderzoek naar het vooraf inzichtelijk maken van de verwachte registratie- en opkomstcijfers van de Bachelor Open Dagen van de Universiteit Twente.

Berg, T.M. van den (2016) Radar sensing for automotive parking distance control applications.

Berndsen, F.B.W. (2016) Development of a port-based modular simulation model of the Robird using an iterative approach.

Bolscher, W.F. ten and Braak, T.P. ter and Haan, S.J.H. and Poirot, M.G. (2016) Item availability restricted.

Bonilla Fernandez, A. (2016) Controller design for Dual-Hemi CVT.

Brink, F. van den (2016) Manipulation of soft grippers for pick-and-place tasks.

Combé, B.G.K. de la (2016) The way to the ultimate warehouse : automatisering en robotisering bij Remeha B.V.

Dam, I.E. van (2016) Het reduceren van de huurkosten van offshore gesloten vuilcontainers.

Delamare, John S.R. (2016) 3D-printed whisker sensor.

Dijkshoorn, P.C. (2016) Designing a generic software architecture for ARW manipulators.

Dols, L.P.J.M. (2016) Een onderzoek naar de haalbaarheid van consignatievoorraad.

Dommerholt, W. and Hiep, M.A.J. and Ruitenbeek, H.C. and Spenkelink, I.M. (2016) Analyseren van trombi met verschillende fibrinedichtheden met behulp van Dual-Energy CT.

Doud, Nolina Leora Siegal (2016) Neuroimaging, Responsibility, and Law: How Neuroscientific Explanations Challenge the Fundaments of Legal Responsibility.

Duffhues, Ir. T.W. (2016) A suitable solution? : How product-service system can support Schiphol in the transition towards a circular economy.

Fontijn, Sven (2016) Internal delivery planning of materials at the tile plant of Struyk Verwo Infra.

Füchtjohann, M.F (2016) Gebruikerservaring van Quantified Self apps : Evaluatie van Quantified Self apps.

Gefferie, S.R. and Noteboom, S.H. and Rooy, P.M. de and Scholten, A.W.J. (2016) Activatie van de occipitaalzenuw bij occipitaal zenuwstimulatie (ONS) voor de behandeling van clusterhoofdpijn.

Geurts, Yoeri (2016) Improving the production process of the Flap Wheels factory at Sundisc Abrasives.

Gietema, Nienke (2016) Towards a standardized availability model for material handling systems.

Ginneken, C.L. van (2016) Future value chain capacity.

Grootjans, R. (2016) Design of an Astronomy Front End for Orbiting Low Frequency Antennas for Radio Astronomy.

Haaren, J.H.L. van and Smit, J.J. and Verhulst, M.M.L.H. and Vlaskamp, L.B. (2016) Influence of endotracheal cuff pressure on tracheal microcirculation in intubated critically ill patients.

Hakkenberg, Chiel (2016) Experimental evaluation of LoRa(WAN) in indoor and outdoor environments.

Harkel, T.C. ten (2016) Item availability restricted.

Hessels, Stefan (2016) Bridging the gap : from process mining to business process simulation.

Hoeven, M.K. van der (2016) Improving the phasing in and out process at Company X.

Hoving, A.M. (2016) A novel black bone MRI protocol for optimisation of 3D head and neck resection planning.

Huizing, E.D. (2016) Optimization, validation and evaluation of myocardial perfusion imaging using Rubidium-82 PET/CT.

Huurne, T.S. ter (2016) Analysing and improving the performance of the pallet break down process by SUEZ for Scania.

Jansen, A.S. and Schuurman, M. and Urgert, T. and Wijlens, K.A.E. (2016) Breathing through a straw : inspiratory imposed work of breathing for children.

Jansen, R. (2016) Waypoint navigation with obstacle avoidance for MAV's.

Jansen, Wout (2016) Analyse Automatische Oplaadalternatieven Automatisch Geleide Voertuigen (AGV's).

Jong, R. de (2016) Estimating the financial impact of data quality issues.

Kara, O.N. (2016) A research into the suitability of manufacturing cells under highly varied product mix.

Keuter, D.R. (2016) Development of an Underwater Fan with Controllable Blade Pitch as an Infrasound Generator for Seismic Imaging.

Lobeek, D. (2016) Imaging of angiogenesis with 68Ga-DOTA-RGD2 PET/CT in squamous cell carcinoma of the head and neck.

Meer, A.J.M. van der (2016) Mapping the underworld.

Meulen, J. van der (2016) Optimization in Diamond.

Nijhof, S.F.J. (2016) Frequency tagging of electrocutaneous stimuli for observation of cortical nociceptive processing.

Noordhuis, RE (2016) Capaciteit & KOOP Onderzoek.

Oever, L.B. van den (2016) Quantification of ASL and DTI Data in the Brain of Patients with Alzheimer’s Disease.

Plomp, B.I. (2016) De indeling van het magazijn bij Brinkers B.V.

Ramaker, K.A. (2016) Plasticity and fracture modeling of composite steel Tribond 1200 for crash simulation.

Reichelt, J. (2016) The Future of Big Data and Business Operations in the Context of Relational In-Memory Databases : Scenarios for the Year 2025.

Ribbers, J. (2016) I spy, I spy with my little eye : A research about the effects of watching eyes on pre-swim shower behaviour.

Roelofs, D.R. (2016) The learning effect of biofeedback training with SensiStep.

Runhart, I.H. (2016) Item availability restricted.

SIMSCH, J.J. (2016) Video Quality in VR : Measuring Impact of Bandwidth-Saving Approaches on Quality of Experience and Social Interaction in a HMD-mediated Video Application.

Schoot Uiterkamp, M.H.H. (2016) Robust planning of electric vehicle charging.

Schyns, P.F.M. (2016) The technological future of the wealth management industry for portfolio management investment services.

Sisso, T.J.C. (2016) Adaptive and Scalable Urban Traffic Control in an Indian Metropolis.

Skute, I. (2016) The impact of partner spatial, social and network differences on the joint R&D project performance: an analysis of university-industry collaborations.

Spoor, R.J.F. (2016) Design of an Ultrasound Guided Breast Biopsy End-effector.

Stahl, S. (2016) Evoking positive emotions by the use of virtual reality in relation to technique acceptance.

Tent Beking, Michiel van (2016) Sparse Array Antenna Signal Reconstruction using Compressive Sensing for Direction of Arrival Estimation.

Teschner, J. (2016) Serious Games in Medical Education : as Learning Tools.

Tijhuis, Ruben J.J. (2016) Improving the handling of special orders at Scania Production Meppel.

Veldhuis, Tim (2016) Automatisering van de assemblagelijn.

Versluijs, W.J. (2016) Care 4 Supply : the development of a serious game to improve the hospital’s internal supply chain.

Vijver, B. van de (2016) A Human Robot Interaction Toolkit with Heterogeneous Multilevel Multimodal Mixing.

Vinke, D. (2016) Enhancing Video Game Design: Involving Users into the Design of Video Games.

Vollenbroek, J.C. (2016) Design and characterization of a microreactor for monodisperse catalytic droplet generation at elevated temperatures and/or pressures.

Vroonhoven, J.F.M. van (2016) Appropriating the Residential Street: Guiding Residents to Gain Quality in the Residential Street.

WISSELINK, W.J. (2016) Cost accounting voor inbound logistiek : Een case studie.

Waegemakers, M.W.H. (2016) Validation of the loading constraints in vehicle routing problems.

Weg, I. van der (2016) Verminderen van het productieverlies bij een verpakkingsfabrikant.

Weijermars, Wouter (2016) Mechanical behaviour of composite sandwich panels in bending after impact.

Wesselink, R. (2016) Blood pressure waveform analysis in cardiogenic shock & acute myocardial infarction.

Wolf, E.R.B. de (2016) Designing an interaction method for the holograms of today.

Wolf, T. (2016) Design of an Air Factor Sensor based on Light Emission.

2015

Adriaansen, A.M.A. (2015) Balancing inventory and equipment contingencies by a flexible semiconductor supply chain simulation model.

Baalen, R.B.C. van (2015) Is serious gaming the holy grail for the wearables industry?

Baarsma, Jort Harm (2015) Docking a UAV using a robotic arm and computer vision.

Balistreri, G. (2015) Potential of Additive Manufacturing in the after-sales service supply chains of ground based military systems.

Bartelds, J.T. (2015) Understanding the critical design parameters of aerial manipulators during physical interaction.

Berkel, Niels van (2015) Item availability restricted.

Bijen, IR. T.J.G. (2015) Developing a scheduling model for a cable manufacturer.

Boer, Vincent de (2015) Nano-bio-sensing with CMOS-Nano-capacitor-array.

Bremmer, Jurgen (2015) Update and Upgrade the current quality assurance in the global supply chain of a heavy truck manufacturing company : managing product quality in the North Bound Flow (NBF) at Scania Production Zwolle.

Buijs, R.D. (2015) A Light Direction Sensor for Integrated 3D Vision.

Dijkstra, Koen (2015) Cartilage repair after joint distraction: intermittent hydrostatic pressure and its influence on mesenchymal stem cells - an in vitro study.

ENDE, R.P.J. VAN DEN (2015) Intraoperative navigation and intraoperative CT in orthopaedic oncology surgery.

El Assal, K.M. (2015) GreenMirror : a visualization and animation framework for state-transition models.

Fredriks, L.M. (2015) Optimizing the number of medical devices based on the total cost of ownership; A case study at Siemens Healthcare Nederland B.V.

Frijnts, S. (2015) Design of a target lock for an endoscope using TeleFLEX.

Gerkema, M.H. and Ketel, M.H.M. and Smits, E.P.J. and Stoel, M.D. van der (2015) Eliminating global head movement during swallowing, to create a more objective, accurate and reproducible assessment of the swallowing function using videofluoroscopy.

Gerritsen, Jasper (2015) Sound source localisation in a robot.

Hakim, V.S. El (2015) Implementation and Analysis of Real-time Object Tracking on the Starburst MPSoC.

Haselhoff, Alexander (2015) The analysis of a mixed steam-gas aero derivative turbine.

Heidkamp, MSc J. (2015) MR-imaging of the prostate: diagnosis and treatment improvement.

Hoeben, B.W. (2015) Goitre-induced ventilation impairment.

Karis, Joep and Huizingh, Evelien (2015) Situatieanalyse OK-planning.

Katgert, Antoine (2015) Logistical impact of additive manufacturing on the after-sales service supply chain at Thales Nederland B.V.

Krul, I. (2015) Decision support for container transport scheduling : A case study at Combi Terminal Twente.

Kuster, L. (2015) Imaging the cervical spinal cord and nerve roots in patients with spinal muscular atrophy using diffusion tensor imaging.

Loon, J. van and Luinstra, J.M. and Schrader, I.M.W. and Velden, F.M.A. van der (2015) Smart materials ter ondersteuning van een falend hart.

Luesink, Erwin (2015) Bursts in brainactivity - a mean field reduction.

Maarleveld, P.J. (2015) Structured production planning using a push-pull hybrid approach.

Meints, A.P. (2015) Improving the dock and staging lane capacity within the warehouses of Albert Heijn by a dynamic allocation during the day.

Mekenkamp, E. (2015) Microburner for Wobbe Index measurements.

Mentink, BSC. P.F. s (2015) Sustainable development? Exploring the social impact of mesocredit in emerging conomies using qualitative and quantitative performance indicators.

Meyere, K,P. de (2015) Switching behavior of AMLEDS for implementation in opto-coupling devices on CMOS chips.

Olk, Christopher (2015) Study of the regeneration of K2CO3·1.5H2O from KHCO3 via a temperature and water vapour pressure swing.

Panman de Wit, J.S. (2015) Onderzoek naar de efficiëntie en groei van PB International.

Peer, J (2015) Forecasting demand for inpatient physical therapy.

Poel, MSc R. (2015) Determining the Feasibility of Cerenkov Luminescence Imaging in Surgical Oncology.

Portema, Eric (2015) Design of the ActInArm : a novel planar active arm support for assisting people with Duchenne Muscular Dystrophy during table-top tasks.

Post, T.H. (2015) Precise localization of a UAV using visual odometry.

Raa, I. te (2015) Recursive functional hardware descriptions using CλaSH.

Roo, M. de (2015) Optimal Event Handling by Multiple UAVs.

Rosmalen, Frank van (2015) Automatic detection of the HFO zone in epilepsy using magnetoencephalography.

Senden, J.M.J. (2015) Biasing a ring-oscillator based true random number generator with an electro-magnetic fault injuction using harmonic waves.

Sloot, R.N.F. (2015) Analysis of a reinforcing steel supply chain in a large construction project.

Smit, F.C. (2015) Integral planning of operating rooms and wards : Tactical allocation of beds to reduce fluctuations in bed utilization for Medisch Spectrum Twente.

Stek, K. Van (2015) Happy ENT: Assessing and Improving Efficiency of the UMCU ENT Outpatient Clinic.

Stottelaar, Bas G.B. (2015) Practical cyber-attacks on autonomous vehicles.

Valk, D.J. van der (2015) How accurately can sitting and the intensity of walking and cycling be classified using an accelerometer on the waist for the purpose of the “Global recommendations on physical activity for health”?

Veen, H. van der (2015) Composing a more complete and relevant Twitter dataset.

Vos, M.C.P.M. (2015) Quantification of parkinsonian tremor, bradykinesia and rigidity using the PowerGlove in combination with a force sensor.

Weijers, F. (2015) Experimental evaluation of a safety aware impedance controller design.

Wellenberg, R.H.H. (2015) Quantification and optimization of metal artefact reduction in hip prostheses imaging using novel CT-techniques.

Wevers, Lennart (2015) Integrated photonic refractive index sensors.

Wopereis, H.W. (2015) Bilateral Human-Robot Control for Semi-Autonomous UAV Navigation.

Zwieten, Ralph van (2015) Debottlenecking bij FrieslandCampina Domo Borculo.

2014

Back, Shinwoo (2014) Synthesis of bimetallic tungstates for finding photocatalytic active compounds with a smaller band gap than tungsten oxide.

Berendsen, Jorien (2014) The entrapment and characterization of single spermatozoa in a microfluidic system.

Bienia, Nikodem (2014) Performance of platinized TiO2 on organic dye degradation coupled with H2 production.

Blok, M.J.M. (2014) Redesigning the distribution network for a large Dutch organization.

Bos, J.C.H. (2014) Synthesizable Specification of a VLIW Processor in the Functional Hardware Description Language CλaSH.

Bos, S.L. (2014) Improving the well-being of independently living seniors using ICT How can a personal service be used to improve the self-efficacy, social engagement and security awareness of independently living seniors?

Det, E.R. van (2014) Convergentie van de chemische industrie.

Dijcks, A. (2014) Improving the flow of parts in the distribution centre operated by a global logistic service provider.

Dijk, Lieke van (2014) Design optimization of a new superconducting magnet system for a LAr Neutrino Detector - A technical design report performed within the framework of a bachelor assignment as part of the Advanced Technology bachelor programme at the ATLAS magnet group at CERN.

Dijkstra, Jelle (2014) Adaptation to Low-frequent Stimuli in Computational and Cultured Neuronal Networks.

Dixhoorn, Frederieke van (2014) Visualization and pressure measurements of the oscillatory flow in a jet pump.

Dove, I. (2014) Analysis of Radio Propagation Inside the Human Body for in-Body Localization Purposes.

Duffhues, T.W. (2014) Toepasbaarheid van een benchmark methodologie in de railsector.

Geertjes, F. (2014) A first step towards fully automated spare parts planning systems - An empirical study on ordering behaviour.

Groenhuis, Vincent (2014) Improving Accuracy and Efficiency in MRI-navigated Breast Biopsy.

Haafkes, Werner (2014) Onderzoek naar een meer efficiënte inrichting van een bestaand logistiek centrum.

Janson, T.G. (2014) Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling.

Kooij, Rimmert B.K. van der (2014) Evaluation of the 7-day release program.

Lu, Yuan (2014) Investigation on factors limiting the performance of deep sleep classification.

Lucas, Marit (2014) Acute DWI infarct core segmentation in patients with acute ischemic stroke ; comparison with CT-based techniques.

Ma, L. (2014) Design, fabrication and characterization of an electrochemical microfluidic chip for drug screening.

Meijer, E. (2014) Facility layout redesign at Siemens Hengelo: an integrated graph theoretic, manual and analytical approach.

Muijzer, Frodo (2014) Development of an automated exercise Detection and Evaluation system using the Kinect depth camera.

Muller, P. (2014) Positioning Police Emergency Vehicles : Determining Facility Locations and Routing Techniques for Fast Emergency Response.

Nibbelke, Vincent (2014) Vascular pattern recognition for finger veins using biometric graph matching.

Padmoes, Tyar (2014) Improving storage cost allocation & warehouse space utilization at a third party warehouse.

Papazoglou, Anastasios (2014) Capability-based planning with TOGAF® and ArchiMate®.

Permatasari, Siti Intan (2014) Rethinking energy conservation via anevaluation of the heating system: A Case Study of Zilverling, University of Twente.

Pluimers, Peter (2014) Item availability restricted.

Reiche, P.J.J. (2014) The combination of ‘Bricks&Clicks’: an investigation into warehousing efficiency improvements for the E-Commerce fulfillment processes at Makro Cash & Carry.

Reiling, Mark (2014) Implementation of a Monocular Structured Light Vision System for Pipe Inspection Robot PIRATE.

Rooijen, MSc M.J. van (2014) Characterization of capacitive deionization concentration profiles for small volume sample preparation.

Russcher, K.J. (2014) Optimization of Bipedal Walker Gaits with Constant Knee Stiffness.

Schipper, Ruurd de (2014) The usefulness of IT innovation classification for business model innovation.

Schmal, J.L. (2014) The transition from operational availability to mission availability - Case study.

Schneider, Helen (2014) Multilayer polyelectrolyte coating of cation exchange membranes to increase monovalent selectivity in reverse electrodialysis.

Scholten, Jasper (2014) Development of a multi-rotor platform with integrated thrust sensors.

Schut, M. A. (2014) Developing a management information tool - a study to determine the information that is needed for job card scheduling in aircraft maintenance.

Sibenius Trip, J.H.C (2014) A rationalistic approach to IT investments using Enterprise Architecture.

Silfhout, Laura van (2014) Modeling uncertainty in Last Time Buy decisions: the IBM case study.

Stijntjes, Ingo (2014) Assessment of automated crowd behaviour analysis based on optical flow.

Straatman, W. (2014) Developing an autopilot for the peregrine falcon Robird.

Uhrig, Alena (2014) Determination of pyrolysis reaction kinetics of raw and torrefied biomass.

Vaseur, C.S.E. (2014) Robird wind tunnel test setup design.

Veltkamp, Henk-Willem (2014) A plug based micro solid phase extraction (uSPE) microfluidic chip for the isolation and purification of DNA.

Veneberg, R.K.M. (2014) Combining Enterprise Architecture & Operational Data To Better Support Decision-Making.

Wanders, I. (2014) Design and analysis of an optimal hopper for use in resonance-based locomotion.

Westerik, P.J. (2014) MEMS acoustic sensors inspired by the locust ear.

Witte, N. (2014) Technology Acceptance of Business Meetings in a 3D Virtual Environment Supported by a Content Management System.

Zandwijk, J.K. van (2014) Dynamic geometry and plaque development in the coronary arteries.

2013

Alveringh, D. (2013) A Large Range Multi-Axis Capacitive Force/Torque Sensor Realized in a Single SOI Wafer.

Brandt, L. van den (2013) Your LOS(S), Your Gain. Prediction tool for the hospital Length of Stay.

Eijkelenkamp, Rik (2013) A study to the effect of cobalt-doping on hybrid silica membranes.

Hageman, T.A.G. (2013) Tracking of the tongue in three dimensions using a visual recording system.

Hilarius, R. (2013) Measuring performance as a dependent variable of patent management maturity.

Hoedemaekers, Janneke (2013) Knowledge dynamics and governance of interational research programmes.

Melzen, Melvin van (2013) Critical current degradation and damage assessment of YBCO coated superconductive tapes under transverse compressive stress.

Nijsten, L.M.J. (2013) Fast temperature changes for polymerase chain reaction (PCR) on a lab-on-a-chip (LoaC).

Schoot Uiterkamp, Judith (2013) Information sharing in the governance of public services: the challenges of Mobile Sensor Web development in Uganda.

Vries, R.A. de (2013) How to determine position, rotation and orientation for a tethered twin nano satellite with sufficient accuracy to map data from an interferometer.

2012

Chernovich, Elena (2012) Trust in e-commerce: the moral agency of trustmarks.

Speek, Ralf (2012) Local and global dynamics of expectations in the Dutch niche development trajectory of micro-combined heat & power boilers.

Tiem, Joël van (2012) Electrospray from glass capillaries.

Weggemans, T.G.A. (2012) Een verkennend onderzoek naar de bachelor eindopdracht van de studie industrieel ontwerpen, met aandacht voor het bedrijfseffect.

2010

Sundaram, J. (2010) Surface tension driven fabrication of three-dimensional microstructures.

2009

Casteleijn, Jasper (2009) Minding the other gap: A case for taxonomic distinctions in nanoethics.

2008

Pronk, Marije (2008) Voorspellen van de afzet bij Bolletje B.V.

Verbaarschot, Anke (2008) Van knelpunten naar oplossing binnenhet etiketteproces van Vredestein Banden B.V.

This list was generated on Thu Nov 14 06:03:54 2024 CET.